All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Radim Krčmář" <rkrcmar@redhat.com>
To: kvm@vger.kernel.org
Cc: Paolo Bonzini <pbonzini@redhat.com>, Andrew Jones <drjones@redhat.com>
Subject: [PATCH kvm-unit-tests v2 00/12] Improve the output of test runners
Date: Thu, 17 Dec 2015 18:53:31 +0100	[thread overview]
Message-ID: <1450374823-7648-1-git-send-email-rkrcmar@redhat.com> (raw)

v1: http://www.spinics.net/lists/kvm/msg125202.html

Drew brought up the existence of scripts/mkstandalone.sh, which
significantly expanded v2 (and my set of curses) ...
I didn't want to do the same twice, so first part of this series,
[1-4/12], reuses run() from run_tests.sh and does some non-conservative
changes to scripts/mkstandalone.sh.  scripts/mkstandalone.sh is lacking
behind run_tests.sh, but should be good enough to fulfill its purpose.

The output of run_tests.sh has also changed a bit and now looks like
this (you'll again need to imagine colours):

> PASS apic (14 tests)
> PASS ioapic (19 tests)
> PASS smptest (1 tests)
> PASS smptest3 (1 tests)
> PASS vmexit_cpuid
> PASS vmexit_vmcall
> PASS vmexit_mov_from_cr8
> PASS vmexit_mov_to_cr8
> PASS vmexit_inl_pmtimer
> PASS vmexit_ipi
> PASS vmexit_ipi_halt
> PASS vmexit_ple_round_robin
> PASS access
> SKIP smap (0 tests)
> SKIP pku (0 tests)
> PASS emulator (132 tests, 1 skipped)
> PASS eventinj (13 tests)
> PASS hypercall (2 tests)
> PASS idt_test (4 tests)
> PASS msr (13 tests)
> PASS pmu (67 tests, 1 expected failures)
> PASS port80
> PASS realmode
> PASS s3
> PASS sieve
> PASS tsc (3 tests)
> PASS tsc_adjust (5 tests)
> PASS xsave (17 tests)
> PASS rmap_chain
> SKIP svm (0 tests)
> SKIP svm-disabled (0 tests)
> SKIP taskswitch (i386 only)
> SKIP taskswitch2 (i386 only)
> PASS kvmclock_test
> PASS pcid (3 tests)
> SKIP vmx (0 tests)
> PASS debug (7 tests)
> SKIP hyperv_synic (failed check)


Radim Krčmář (12):
  run_tests: move run() to scripts/
  run_tests: prepare for changes in scripts/mkstandalone
  scripts/mkstandalone: use common run function
  scripts/mkstandalone: improve exit paths
  lib/report: allow test skipping
  x86/*: report skipped tests
  x86/pmu: expect failure with nmi_watchdog
  scripts/run: generalize check
  x86/hyperv_synic: check for support before testing
  run_tests: print summary
  wrappers: consolidate skip output
  run_tests: suppress stderr

 lib/libcflat.h          |  1 +
 lib/report.c            | 44 +++++++++++++++++++++++-----------
 run_tests.sh            | 58 +++++---------------------------------------
 scripts/mkstandalone.sh | 64 +++++++++++++++++++++----------------------------
 scripts/run.bash        | 62 +++++++++++++++++++++++++++++++++++++++++++++++
 x86/apic.c              |  7 +++---
 x86/emulator.c          |  2 +-
 x86/hyperv_synic.c      |  2 +-
 x86/pku.c               |  2 +-
 x86/pmu.c               | 11 +++++++--
 x86/smap.c              |  2 +-
 x86/svm.c               |  2 +-
 x86/tsc.c               |  2 +-
 x86/unittests.cfg       |  4 ++--
 14 files changed, 146 insertions(+), 117 deletions(-)
 create mode 100644 scripts/run.bash

-- 
2.6.4


             reply	other threads:[~2015-12-17 17:53 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-12-17 17:53 Radim Krčmář [this message]
2015-12-17 17:53 ` [PATCH kvm-unit-tests v2 01/12] run_tests: move run() to scripts/ Radim Krčmář
2015-12-17 18:45   ` Andrew Jones
2015-12-18 10:42     ` Radim Krčmář
2015-12-18 18:52       ` Andrew Jones
2015-12-17 17:53 ` [PATCH kvm-unit-tests v2 02/12] run_tests: prepare for changes in scripts/mkstandalone Radim Krčmář
2015-12-17 18:53   ` Andrew Jones
2015-12-18 10:49     ` Radim Krčmář
2015-12-17 17:53 ` [PATCH kvm-unit-tests v2 03/12] scripts/mkstandalone: use common run function Radim Krčmář
2015-12-17 19:09   ` Andrew Jones
2015-12-18 11:02     ` Radim Krčmář
2015-12-17 17:53 ` [PATCH kvm-unit-tests v2 04/12] scripts/mkstandalone: improve exit paths Radim Krčmář
2015-12-17 19:15   ` Andrew Jones
2015-12-17 17:53 ` [PATCH kvm-unit-tests v2 05/12] lib/report: allow test skipping Radim Krčmář
2015-12-17 19:30   ` Andrew Jones
2015-12-17 19:37     ` Andrew Jones
2015-12-18 11:18       ` Radim Krčmář
2015-12-18 18:55         ` Andrew Jones
2015-12-17 17:53 ` [PATCH kvm-unit-tests v2 06/12] x86/*: report skipped tests Radim Krčmář
2015-12-17 17:53 ` [PATCH kvm-unit-tests v2 07/12] x86/pmu: expect failure with nmi_watchdog Radim Krčmář
2015-12-17 17:53 ` [PATCH kvm-unit-tests v2 08/12] scripts/run: generalize check Radim Krčmář
2015-12-17 17:53 ` [PATCH kvm-unit-tests v2 09/12] x86/hyperv_synic: check for support before testing Radim Krčmář
2015-12-17 19:42   ` Andrew Jones
2015-12-18 12:13     ` Radim Krčmář
2015-12-17 17:53 ` [PATCH kvm-unit-tests v2 10/12] run_tests: print summary Radim Krčmář
2015-12-17 19:55   ` Andrew Jones
2015-12-18 12:24     ` Radim Krčmář
2015-12-17 20:06   ` Andrew Jones
2015-12-18 12:25     ` Radim Krčmář
2015-12-17 17:53 ` [PATCH kvm-unit-tests v2 11/12] wrappers: consolidate skip output Radim Krčmář
2015-12-17 19:59   ` Andrew Jones
2015-12-17 17:53 ` [PATCH kvm-unit-tests v2 12/12] run_tests: suppress stderr Radim Krčmář
2015-12-17 20:01   ` Andrew Jones
2015-12-17 20:04 ` [PATCH kvm-unit-tests v2 00/12] Improve the output of test runners Andrew Jones
2015-12-18 12:38   ` Radim Krčmář
2015-12-18 18:57     ` Andrew Jones

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1450374823-7648-1-git-send-email-rkrcmar@redhat.com \
    --to=rkrcmar@redhat.com \
    --cc=drjones@redhat.com \
    --cc=kvm@vger.kernel.org \
    --cc=pbonzini@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.