All of lore.kernel.org
 help / color / mirror / Atom feed
From: Stanimir Varbanov <stanimir.varbanov@linaro.org>
To: linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
	linux-pci@vger.kernel.org, Bjorn Helgaas <bhelgaas@google.com>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>,
	Russell King <linux@arm.linux.org.uk>,
	Rob Herring <robh+dt@kernel.org>, Rob Herring <robh@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Pawel Moll <pawel.moll@arm.com>,
	Ian Campbell <ijc+devicetree@hellion.org.uk>,
	Arnd Bergmann <arnd@arndb.de>, Jingoo Han <jingoohan1@gmail.com>,
	Pratyush Anand <pratyush.anand@gmail.com>,
	Bjorn Andersson <bjorn.andersson@sonymobile.com>,
	Stanimir Varbanov <stanimir.varbanov@linaro.org>
Subject: [PATCH v5 0/5] Qualcomm PCIe driver and designware fixes
Date: Fri, 18 Dec 2015 14:38:54 +0200	[thread overview]
Message-ID: <1450442339-18765-1-git-send-email-stanimir.varbanov@linaro.org> (raw)

Hi,

I'm sending v5 with following changes:
- in 1/5 - replace wmb() call with PCIE_ATU_CR2 register read.
- in 3/5 - addressed comments from Born Helgaas about usage of a
standard PCI capabilities register names and rename link training
function to the way that other Designware based drivers use.
- in 5/5 - addressed a comment from Bjorn Andersson about regulator
label duplication.

Comments are welcome!

The previous v4 of the patch set can be found at [1].

regards,
Stan

[1] https://lkml.org/lkml/2015/12/3/370

Stanimir Varbanov (5):
  PCI: designware: ensure ATU is enabled before IO/conf space accesses
  DT: PCI: qcom: Document PCIe devicetree bindings
  PCI: qcom: Add Qualcomm PCIe controller driver
  ARM: dts: apq8064: add pcie devicetree node
  ARM: dts: ifc6410: enable pcie dt node for this board

 .../devicetree/bindings/pci/qcom,pcie.txt          |  233 ++++++++
 MAINTAINERS                                        |    7 +
 arch/arm/boot/dts/qcom-apq8064-ifc6410.dts         |   26 +
 arch/arm/boot/dts/qcom-apq8064.dtsi                |   36 ++
 drivers/pci/host/Kconfig                           |   10 +
 drivers/pci/host/Makefile                          |    1 +
 drivers/pci/host/pcie-designware.c                 |    7 +
 drivers/pci/host/pcie-qcom.c                       |  617 ++++++++++++++++++++
 8 files changed, 937 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pci/qcom,pcie.txt
 create mode 100644 drivers/pci/host/pcie-qcom.c

-- 
1.7.9.5

WARNING: multiple messages have this Message-ID (diff)
From: stanimir.varbanov@linaro.org (Stanimir Varbanov)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 0/5] Qualcomm PCIe driver and designware fixes
Date: Fri, 18 Dec 2015 14:38:54 +0200	[thread overview]
Message-ID: <1450442339-18765-1-git-send-email-stanimir.varbanov@linaro.org> (raw)

Hi,

I'm sending v5 with following changes:
- in 1/5 - replace wmb() call with PCIE_ATU_CR2 register read.
- in 3/5 - addressed comments from Born Helgaas about usage of a
standard PCI capabilities register names and rename link training
function to the way that other Designware based drivers use.
- in 5/5 - addressed a comment from Bjorn Andersson about regulator
label duplication.

Comments are welcome!

The previous v4 of the patch set can be found at [1].

regards,
Stan

[1] https://lkml.org/lkml/2015/12/3/370

Stanimir Varbanov (5):
  PCI: designware: ensure ATU is enabled before IO/conf space accesses
  DT: PCI: qcom: Document PCIe devicetree bindings
  PCI: qcom: Add Qualcomm PCIe controller driver
  ARM: dts: apq8064: add pcie devicetree node
  ARM: dts: ifc6410: enable pcie dt node for this board

 .../devicetree/bindings/pci/qcom,pcie.txt          |  233 ++++++++
 MAINTAINERS                                        |    7 +
 arch/arm/boot/dts/qcom-apq8064-ifc6410.dts         |   26 +
 arch/arm/boot/dts/qcom-apq8064.dtsi                |   36 ++
 drivers/pci/host/Kconfig                           |   10 +
 drivers/pci/host/Makefile                          |    1 +
 drivers/pci/host/pcie-designware.c                 |    7 +
 drivers/pci/host/pcie-qcom.c                       |  617 ++++++++++++++++++++
 8 files changed, 937 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pci/qcom,pcie.txt
 create mode 100644 drivers/pci/host/pcie-qcom.c

-- 
1.7.9.5

             reply	other threads:[~2015-12-18 12:38 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-12-18 12:38 Stanimir Varbanov [this message]
2015-12-18 12:38 ` [PATCH v5 0/5] Qualcomm PCIe driver and designware fixes Stanimir Varbanov
2015-12-18 12:38 ` [PATCH v5 1/5] PCI: designware: ensure ATU is enabled before IO/conf space accesses Stanimir Varbanov
2015-12-18 12:38   ` Stanimir Varbanov
2015-12-18 14:41   ` Pratyush Anand
2015-12-18 14:41     ` Pratyush Anand
2015-12-18 14:41     ` Pratyush Anand
2016-01-04 14:31     ` Stanimir Varbanov
2016-01-04 14:31       ` Stanimir Varbanov
2016-01-04 14:31       ` Stanimir Varbanov
2016-01-06 18:20   ` Bjorn Helgaas
2016-01-06 18:20     ` Bjorn Helgaas
2016-01-07  6:33     ` Jisheng Zhang
2016-01-07  6:33       ` Jisheng Zhang
2016-01-07  6:33       ` Jisheng Zhang
2015-12-18 12:38 ` [PATCH v5 2/5] DT: PCI: qcom: Document PCIe devicetree bindings Stanimir Varbanov
2015-12-18 12:38   ` Stanimir Varbanov
2015-12-18 12:38 ` [PATCH v5 3/5] PCI: qcom: Add Qualcomm PCIe controller driver Stanimir Varbanov
2015-12-18 12:38   ` Stanimir Varbanov
2015-12-18 12:38   ` Stanimir Varbanov
2015-12-18 13:44   ` [PATCH] PCI: qcom: fix ptr_ret.cocci warnings kbuild test robot
2015-12-18 13:44     ` kbuild test robot
2015-12-18 13:44     ` kbuild test robot
2015-12-18 13:44   ` [PATCH v5 3/5] PCI: qcom: Add Qualcomm PCIe controller driver kbuild test robot
2015-12-18 13:44     ` kbuild test robot
2015-12-18 13:44     ` kbuild test robot
2015-12-20 23:10     ` Bjorn Andersson
2015-12-20 23:10       ` Bjorn Andersson
2015-12-20 23:10       ` Bjorn Andersson
2015-12-21 23:04       ` Arnd Bergmann
2015-12-21 23:04         ` Arnd Bergmann
2015-12-21 23:04         ` Arnd Bergmann
2015-12-18 12:38 ` [PATCH v5 4/5] ARM: dts: apq8064: add pcie devicetree node Stanimir Varbanov
2015-12-18 12:38   ` Stanimir Varbanov
2015-12-18 12:38 ` [PATCH v5 5/5] ARM: dts: ifc6410: enable pcie dt node for this board Stanimir Varbanov
2015-12-18 12:38   ` Stanimir Varbanov
2016-01-05 21:42 ` [PATCH v5 0/5] Qualcomm PCIe driver and designware fixes Bjorn Helgaas
2016-01-05 21:42   ` Bjorn Helgaas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1450442339-18765-1-git-send-email-stanimir.varbanov@linaro.org \
    --to=stanimir.varbanov@linaro.org \
    --cc=arnd@arndb.de \
    --cc=bhelgaas@google.com \
    --cc=bjorn.andersson@sonymobile.com \
    --cc=devicetree@vger.kernel.org \
    --cc=ijc+devicetree@hellion.org.uk \
    --cc=jingoohan1@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux@arm.linux.org.uk \
    --cc=mark.rutland@arm.com \
    --cc=pawel.moll@arm.com \
    --cc=pratyush.anand@gmail.com \
    --cc=robh+dt@kernel.org \
    --cc=robh@kernel.org \
    --cc=srinivas.kandagatla@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.