[U-Boot] [PATCH 2/2 v2] usb: musb: Fix hub port number for SPLIT transactions

["Stefan Brüns" <stefan.bruens@rwth-aachen.de>]

The ifdef'ed Linux kernel code uses the 1 based port number, whereas U-Boot
puts a 0 based port number into the register. The reason the 0 based port
number apparently works can probably be taken from the USB 2.0 spec:

8.4.2.2 Start-Split Transaction Token
... The host must correctly set the port field for single and multiple TT
hub implementations. A single TT hub implementation *may ignore* the port
field.

Actually, as far as I unterstand, a multi TT hub defaults to single TT
(bAlternateSetting: 0) until switched via SetInterface, so even "port 42"
would work.

The change was verified by hardcoding the port number to a wrong value,
SPLIT transactions kept working (although using a DWC2 instead of MUSB).
Tested hubs are the RPi onboard SMC9514 and an external "05e3:0608
Genesys Logic, Inc. USB-2.0 4-Port HUB". The former is a multi TT hub,
the latter single TT only.

Signed-off-by: Stefan Br?ns <stefan.bruens@rwth-aachen.de>
---
 drivers/usb/musb-new/musb_host.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/musb-new/musb_host.c b/drivers/usb/musb-new/musb_host.c
index fc4ba62..5c028d4 100644
--- a/drivers/usb/musb-new/musb_host.c
+++ b/drivers/usb/musb-new/musb_host.c
@@ -2096,7 +2096,7 @@ int musb_urb_enqueue(
 				uint8_t hubaddr = 0;
 				usb_find_usb2_hub_address_port(udev, &hubaddr, &portnr)
 				qh->h_addr_reg = hubaddr;
-				qh->h_port_reg = portnr - 1;
+				qh->h_port_reg = portnr;
 			}
 #endif
 		}
-- 
2.1.4