From mboxrd@z Thu Jan 1 00:00:00 1970 From: Bin Meng Date: Thu, 31 Dec 2015 00:53:05 -0800 Subject: [U-Boot] [PATCH 3/8] serial: lpuart: Move CONFIG_FSL_LPUART to Kconfig In-Reply-To: <1451551990-32165-1-git-send-email-bmeng.cn@gmail.com> References: <1451551990-32165-1-git-send-email-bmeng.cn@gmail.com> Message-ID: <1451551990-32165-4-git-send-email-bmeng.cn@gmail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de LPUART is seen on Freescale VF610 and QorIQ Layerscape devices. Create a Kconfig option and move it to defconfig for all boards that have this serial driver. Signed-off-by: Bin Meng --- configs/colibri_vf_defconfig | 1 + configs/colibri_vf_dtb_defconfig | 1 + configs/ls1021aqds_ddr4_nor_lpuart_defconfig | 1 + configs/ls1021aqds_nor_lpuart_defconfig | 1 + configs/ls1021atwr_nor_lpuart_defconfig | 1 + configs/pcm052_defconfig | 1 + configs/vf610twr_defconfig | 1 + configs/vf610twr_nand_defconfig | 1 + drivers/serial/Kconfig | 6 ++++++ include/configs/colibri_vf.h | 1 - include/configs/ls1021aqds.h | 1 - include/configs/ls1021atwr.h | 1 - include/configs/pcm052.h | 1 - include/configs/vf610twr.h | 1 - 14 files changed, 14 insertions(+), 5 deletions(-) diff --git a/configs/colibri_vf_defconfig b/configs/colibri_vf_defconfig index f8441e3..45917c8 100644 --- a/configs/colibri_vf_defconfig +++ b/configs/colibri_vf_defconfig @@ -8,3 +8,4 @@ CONFIG_CMD_GPIO=y CONFIG_DM=y CONFIG_NAND_VF610_NFC=y CONFIG_SYS_NAND_VF610_NFC_60_ECC_BYTES=y +CONFIG_FSL_LPUART=y diff --git a/configs/colibri_vf_dtb_defconfig b/configs/colibri_vf_dtb_defconfig index 3596cec..b1a843a 100644 --- a/configs/colibri_vf_dtb_defconfig +++ b/configs/colibri_vf_dtb_defconfig @@ -11,3 +11,4 @@ CONFIG_OF_CONTROL=y CONFIG_DM=y CONFIG_NAND_VF610_NFC=y CONFIG_SYS_NAND_VF610_NFC_60_ECC_BYTES=y +CONFIG_FSL_LPUART=y diff --git a/configs/ls1021aqds_ddr4_nor_lpuart_defconfig b/configs/ls1021aqds_ddr4_nor_lpuart_defconfig index 68bd117..44b2a0d 100644 --- a/configs/ls1021aqds_ddr4_nor_lpuart_defconfig +++ b/configs/ls1021aqds_ddr4_nor_lpuart_defconfig @@ -4,3 +4,4 @@ CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4,LPUART" # CONFIG_CMD_SETEXPR is not set CONFIG_NETDEVICES=y CONFIG_E1000=y +CONFIG_FSL_LPUART=y diff --git a/configs/ls1021aqds_nor_lpuart_defconfig b/configs/ls1021aqds_nor_lpuart_defconfig index b2f6832..1186af2 100644 --- a/configs/ls1021aqds_nor_lpuart_defconfig +++ b/configs/ls1021aqds_nor_lpuart_defconfig @@ -4,3 +4,4 @@ CONFIG_SYS_EXTRA_OPTIONS="LPUART" # CONFIG_CMD_SETEXPR is not set CONFIG_NETDEVICES=y CONFIG_E1000=y +CONFIG_FSL_LPUART=y diff --git a/configs/ls1021atwr_nor_lpuart_defconfig b/configs/ls1021atwr_nor_lpuart_defconfig index d7afca9..58cd61f 100644 --- a/configs/ls1021atwr_nor_lpuart_defconfig +++ b/configs/ls1021atwr_nor_lpuart_defconfig @@ -4,3 +4,4 @@ CONFIG_SYS_EXTRA_OPTIONS="LPUART" # CONFIG_CMD_SETEXPR is not set CONFIG_NETDEVICES=y CONFIG_E1000=y +CONFIG_FSL_LPUART=y diff --git a/configs/pcm052_defconfig b/configs/pcm052_defconfig index 9125645..26ab733 100644 --- a/configs/pcm052_defconfig +++ b/configs/pcm052_defconfig @@ -3,3 +3,4 @@ CONFIG_TARGET_PCM052=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/phytec/pcm052/imximage.cfg,ENV_IS_IN_NAND" CONFIG_NAND_VF610_NFC=y CONFIG_SYS_NAND_BUSWIDTH_16BIT=y +CONFIG_FSL_LPUART=y diff --git a/configs/vf610twr_defconfig b/configs/vf610twr_defconfig index dc8df5c..d51c93b 100644 --- a/configs/vf610twr_defconfig +++ b/configs/vf610twr_defconfig @@ -6,3 +6,4 @@ CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/vf610twr/imximage.cfg,ENV_I CONFIG_NAND_VF610_NFC=y CONFIG_SYS_NAND_BUSWIDTH_16BIT=y CONFIG_SPI_FLASH=y +CONFIG_FSL_LPUART=y diff --git a/configs/vf610twr_nand_defconfig b/configs/vf610twr_nand_defconfig index 98880f3..299fa8f 100644 --- a/configs/vf610twr_nand_defconfig +++ b/configs/vf610twr_nand_defconfig @@ -6,3 +6,4 @@ CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/vf610twr/imximage.cfg,ENV_I CONFIG_NAND_VF610_NFC=y CONFIG_SYS_NAND_BUSWIDTH_16BIT=y CONFIG_SPI_FLASH=y +CONFIG_FSL_LPUART=y diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 1fc287e..3b54511 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -186,6 +186,12 @@ config ALTERA_UART Select this to enable an UART for Altera devices. Please find details on the "Embedded Peripherals IP User Guide" of Altera. +config FSL_LPUART + bool "Freescale LPUART support" + help + Select this to enable a Low Power UART for Freescale VF610 and + QorIQ Layerscape devices. + config SYS_NS16550 bool "NS16550 UART or compatible" help diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h index 708c79a..5aed3a5 100644 --- a/include/configs/colibri_vf.h +++ b/include/configs/colibri_vf.h @@ -36,7 +36,6 @@ #define CONFIG_BOARD_EARLY_INIT_F -#define CONFIG_FSL_LPUART #define LPUART_BASE UART0_BASE /* Allow to overwrite serial and ethaddr */ diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h index 2e8dbc7..e8b1eca 100644 --- a/include/configs/ls1021aqds.h +++ b/include/configs/ls1021aqds.h @@ -371,7 +371,6 @@ unsigned long get_board_ddr_clk(void); * Serial Port */ #ifdef CONFIG_LPUART -#define CONFIG_FSL_LPUART #define CONFIG_LPUART_32B_REG #else #define CONFIG_CONS_INDEX 1 diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h index bbef2a7..317ba62 100644 --- a/include/configs/ls1021atwr.h +++ b/include/configs/ls1021atwr.h @@ -266,7 +266,6 @@ * Serial Port */ #ifdef CONFIG_LPUART -#define CONFIG_FSL_LPUART #define CONFIG_LPUART_32B_REG #else #define CONFIG_CONS_INDEX 1 diff --git a/include/configs/pcm052.h b/include/configs/pcm052.h index b851bba..891bdb0 100644 --- a/include/configs/pcm052.h +++ b/include/configs/pcm052.h @@ -27,7 +27,6 @@ #define CONFIG_BOARD_EARLY_INIT_F -#define CONFIG_FSL_LPUART #define LPUART_BASE UART1_BASE /* Allow to overwrite serial and ethaddr */ diff --git a/include/configs/vf610twr.h b/include/configs/vf610twr.h index 34df6f0..dcfafaf 100644 --- a/include/configs/vf610twr.h +++ b/include/configs/vf610twr.h @@ -34,7 +34,6 @@ #define CONFIG_BOARD_EARLY_INIT_F -#define CONFIG_FSL_LPUART #define LPUART_BASE UART1_BASE /* Allow to overwrite serial and ethaddr */ -- 1.8.2.1