From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753782AbcAHB2q (ORCPT ); Thu, 7 Jan 2016 20:28:46 -0500 Received: from mailgw01.mediatek.com ([210.61.82.183]:56979 "EHLO mailgw01.mediatek.com" rhost-flags-OK-FAIL-OK-FAIL) by vger.kernel.org with ESMTP id S1753388AbcAHB2o (ORCPT ); Thu, 7 Jan 2016 20:28:44 -0500 X-Listener-Flag: 11101 From: Chunfeng Yun To: Mathias Nyman CC: Matthias Brugger , Felipe Balbi , Chunfeng Yun , , , , , Daniel Kurtz , Sergei Shtylyov , Greg Kroah-Hartman Subject: [RESEND PATCH v2] usb: xhci-mtk: fix AHB bus hang up caused by roothubs polling Date: Fri, 8 Jan 2016 09:28:37 +0800 Message-ID: <1452216517-3765-1-git-send-email-chunfeng.yun@mediatek.com> X-Mailer: git-send-email 1.8.1.1.dirty MIME-Version: 1.0 Content-Type: text/plain X-MTK: N Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org when ip fails to enter sleep mode, register access protection will be disabled, at the same time if all clocks are disabled, access register will hang up AHB bus. the common case causes ip sleep failure is that after all ports enter U3 but before ip enters sleep mode, a port receives a resume signal('K'). this will happens when such as clicks mouse to try to do remote-wakeup to stop system enter suspend. so stop polling root hubs to avoid access xHCI register on bus suspend, and restart it when bus resumes. Signed-off-by: Chunfeng Yun --- drivers/usb/host/xhci-mtk.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c index c9ab6a4..9532f5a 100644 --- a/drivers/usb/host/xhci-mtk.c +++ b/drivers/usb/host/xhci-mtk.c @@ -696,9 +696,24 @@ static int xhci_mtk_remove(struct platform_device *dev) } #ifdef CONFIG_PM_SLEEP +/* + * if ip sleep fails, and all clocks are disabled, access register will hang + * AHB bus, so stop polling roothubs to avoid regs access on bus suspend. + * and no need to check whether ip sleep failed or not; this will cause SPM + * to wake up system immediately after system suspend complete if ip sleep + * fails, it is what we wanted. + */ static int xhci_mtk_suspend(struct device *dev) { struct xhci_hcd_mtk *mtk = dev_get_drvdata(dev); + struct usb_hcd *hcd = mtk->hcd; + struct xhci_hcd *xhci = hcd_to_xhci(hcd); + + xhci_dbg(xhci, "%s: stop port polling\n", __func__); + clear_bit(HCD_FLAG_POLL_RH, &hcd->flags); + del_timer_sync(&hcd->rh_timer); + clear_bit(HCD_FLAG_POLL_RH, &xhci->shared_hcd->flags); + del_timer_sync(&xhci->shared_hcd->rh_timer); xhci_mtk_host_disable(mtk); xhci_mtk_phy_power_off(mtk); @@ -710,11 +725,19 @@ static int xhci_mtk_suspend(struct device *dev) static int xhci_mtk_resume(struct device *dev) { struct xhci_hcd_mtk *mtk = dev_get_drvdata(dev); + struct usb_hcd *hcd = mtk->hcd; + struct xhci_hcd *xhci = hcd_to_xhci(hcd); usb_wakeup_disable(mtk); xhci_mtk_clks_enable(mtk); xhci_mtk_phy_power_on(mtk); xhci_mtk_host_enable(mtk); + + xhci_dbg(xhci, "%s: restart port polling\n", __func__); + set_bit(HCD_FLAG_POLL_RH, &hcd->flags); + usb_hcd_poll_rh_status(hcd); + set_bit(HCD_FLAG_POLL_RH, &xhci->shared_hcd->flags); + usb_hcd_poll_rh_status(xhci->shared_hcd); return 0; } -- 1.8.1.1.dirty From mboxrd@z Thu Jan 1 00:00:00 1970 From: Chunfeng Yun Subject: [RESEND PATCH v2] usb: xhci-mtk: fix AHB bus hang up caused by roothubs polling Date: Fri, 8 Jan 2016 09:28:37 +0800 Message-ID: <1452216517-3765-1-git-send-email-chunfeng.yun@mediatek.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: Sender: linux-kernel-owner@vger.kernel.org To: Mathias Nyman Cc: Matthias Brugger , Felipe Balbi , Chunfeng Yun , linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-usb@vger.kernel.org, linux-mediatek@lists.infradead.org, Daniel Kurtz , Sergei Shtylyov , Greg Kroah-Hartman List-Id: linux-mediatek@lists.infradead.org when ip fails to enter sleep mode, register access protection will be disabled, at the same time if all clocks are disabled, access register will hang up AHB bus. the common case causes ip sleep failure is that after all ports enter U3 but before ip enters sleep mode, a port receives a resume signal('K'). this will happens when such as clicks mouse to try to do remote-wakeup to stop system enter suspend. so stop polling root hubs to avoid access xHCI register on bus suspend, and restart it when bus resumes. Signed-off-by: Chunfeng Yun --- drivers/usb/host/xhci-mtk.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c index c9ab6a4..9532f5a 100644 --- a/drivers/usb/host/xhci-mtk.c +++ b/drivers/usb/host/xhci-mtk.c @@ -696,9 +696,24 @@ static int xhci_mtk_remove(struct platform_device *dev) } #ifdef CONFIG_PM_SLEEP +/* + * if ip sleep fails, and all clocks are disabled, access register will hang + * AHB bus, so stop polling roothubs to avoid regs access on bus suspend. + * and no need to check whether ip sleep failed or not; this will cause SPM + * to wake up system immediately after system suspend complete if ip sleep + * fails, it is what we wanted. + */ static int xhci_mtk_suspend(struct device *dev) { struct xhci_hcd_mtk *mtk = dev_get_drvdata(dev); + struct usb_hcd *hcd = mtk->hcd; + struct xhci_hcd *xhci = hcd_to_xhci(hcd); + + xhci_dbg(xhci, "%s: stop port polling\n", __func__); + clear_bit(HCD_FLAG_POLL_RH, &hcd->flags); + del_timer_sync(&hcd->rh_timer); + clear_bit(HCD_FLAG_POLL_RH, &xhci->shared_hcd->flags); + del_timer_sync(&xhci->shared_hcd->rh_timer); xhci_mtk_host_disable(mtk); xhci_mtk_phy_power_off(mtk); @@ -710,11 +725,19 @@ static int xhci_mtk_suspend(struct device *dev) static int xhci_mtk_resume(struct device *dev) { struct xhci_hcd_mtk *mtk = dev_get_drvdata(dev); + struct usb_hcd *hcd = mtk->hcd; + struct xhci_hcd *xhci = hcd_to_xhci(hcd); usb_wakeup_disable(mtk); xhci_mtk_clks_enable(mtk); xhci_mtk_phy_power_on(mtk); xhci_mtk_host_enable(mtk); + + xhci_dbg(xhci, "%s: restart port polling\n", __func__); + set_bit(HCD_FLAG_POLL_RH, &hcd->flags); + usb_hcd_poll_rh_status(hcd); + set_bit(HCD_FLAG_POLL_RH, &xhci->shared_hcd->flags); + usb_hcd_poll_rh_status(xhci->shared_hcd); return 0; } -- 1.8.1.1.dirty From mboxrd@z Thu Jan 1 00:00:00 1970 From: chunfeng.yun@mediatek.com (Chunfeng Yun) Date: Fri, 8 Jan 2016 09:28:37 +0800 Subject: [RESEND PATCH v2] usb: xhci-mtk: fix AHB bus hang up caused by roothubs polling Message-ID: <1452216517-3765-1-git-send-email-chunfeng.yun@mediatek.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org when ip fails to enter sleep mode, register access protection will be disabled, at the same time if all clocks are disabled, access register will hang up AHB bus. the common case causes ip sleep failure is that after all ports enter U3 but before ip enters sleep mode, a port receives a resume signal('K'). this will happens when such as clicks mouse to try to do remote-wakeup to stop system enter suspend. so stop polling root hubs to avoid access xHCI register on bus suspend, and restart it when bus resumes. Signed-off-by: Chunfeng Yun --- drivers/usb/host/xhci-mtk.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c index c9ab6a4..9532f5a 100644 --- a/drivers/usb/host/xhci-mtk.c +++ b/drivers/usb/host/xhci-mtk.c @@ -696,9 +696,24 @@ static int xhci_mtk_remove(struct platform_device *dev) } #ifdef CONFIG_PM_SLEEP +/* + * if ip sleep fails, and all clocks are disabled, access register will hang + * AHB bus, so stop polling roothubs to avoid regs access on bus suspend. + * and no need to check whether ip sleep failed or not; this will cause SPM + * to wake up system immediately after system suspend complete if ip sleep + * fails, it is what we wanted. + */ static int xhci_mtk_suspend(struct device *dev) { struct xhci_hcd_mtk *mtk = dev_get_drvdata(dev); + struct usb_hcd *hcd = mtk->hcd; + struct xhci_hcd *xhci = hcd_to_xhci(hcd); + + xhci_dbg(xhci, "%s: stop port polling\n", __func__); + clear_bit(HCD_FLAG_POLL_RH, &hcd->flags); + del_timer_sync(&hcd->rh_timer); + clear_bit(HCD_FLAG_POLL_RH, &xhci->shared_hcd->flags); + del_timer_sync(&xhci->shared_hcd->rh_timer); xhci_mtk_host_disable(mtk); xhci_mtk_phy_power_off(mtk); @@ -710,11 +725,19 @@ static int xhci_mtk_suspend(struct device *dev) static int xhci_mtk_resume(struct device *dev) { struct xhci_hcd_mtk *mtk = dev_get_drvdata(dev); + struct usb_hcd *hcd = mtk->hcd; + struct xhci_hcd *xhci = hcd_to_xhci(hcd); usb_wakeup_disable(mtk); xhci_mtk_clks_enable(mtk); xhci_mtk_phy_power_on(mtk); xhci_mtk_host_enable(mtk); + + xhci_dbg(xhci, "%s: restart port polling\n", __func__); + set_bit(HCD_FLAG_POLL_RH, &hcd->flags); + usb_hcd_poll_rh_status(hcd); + set_bit(HCD_FLAG_POLL_RH, &xhci->shared_hcd->flags); + usb_hcd_poll_rh_status(xhci->shared_hcd); return 0; } -- 1.8.1.1.dirty