All of lore.kernel.org
 help / color / mirror / Atom feed
From: abhay.kumar@intel.com
To: Intel-gfx@lists.freedesktop.org, ville.syrjala@linux.intel.com
Subject: [PATCH v4] drm/i915: edp resume/On time optimization.
Date: Tue, 12 Jan 2016 17:57:35 -0800	[thread overview]
Message-ID: <1452650255-11125-1-git-send-email-abhay.kumar@intel.com> (raw)

From: Abhay Kumar <abhay.kumar@intel.com>

Make resume/on codepath not to wait for panel_power_cycle_delay(t11_t12)
if this time is already spent in suspend/poweron time.

v2: Use CLOCK_BOOTTIME and remove jiffies for panel power cycle
    delay calculation(Ville).

v3: Addressed below comments
    1. Tracking time from where last powercycle is initiated.
    2. Used ktime_get_bootime() wrapper for boottime clock.
    3. Used ktime_ms_delta() to get time difference.

v4: Updated v3 change log in detail.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Abhay Kumar <abhay.kumar@intel.com>
---
 drivers/gpu/drm/i915/intel_dp.c  | 19 ++++++++++++++-----
 drivers/gpu/drm/i915/intel_drv.h |  2 +-
 2 files changed, 15 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 796e3d3..0042693 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -1812,12 +1812,21 @@ static void wait_panel_off(struct intel_dp *intel_dp)
 
 static void wait_panel_power_cycle(struct intel_dp *intel_dp)
 {
+	static ktime_t panel_power_on_time;
+	s64 panel_power_off_duration;
+
 	DRM_DEBUG_KMS("Wait for panel power cycle\n");
 
+	/* take the difference of currrent time and panel power off time
+	 * and then make panel wait for t11_t12 if needed. */
+	panel_power_on_time = ktime_get_boottime();
+	panel_power_off_duration = ktime_ms_delta(panel_power_on_time, intel_dp->panel_power_off_time);
+
 	/* When we disable the VDD override bit last we have to do the manual
 	 * wait. */
-	wait_remaining_ms_from_jiffies(intel_dp->last_power_cycle,
-				       intel_dp->panel_power_cycle_delay);
+	if (panel_power_off_duration < (s64)intel_dp->panel_power_cycle_delay)
+		wait_remaining_ms_from_jiffies(jiffies,
+				       intel_dp->panel_power_cycle_delay - panel_power_off_duration);
 
 	wait_panel_status(intel_dp, IDLE_CYCLE_MASK, IDLE_CYCLE_VALUE);
 }
@@ -1969,7 +1978,7 @@ static void edp_panel_vdd_off_sync(struct intel_dp *intel_dp)
 	I915_READ(pp_stat_reg), I915_READ(pp_ctrl_reg));
 
 	if ((pp & POWER_TARGET_ON) == 0)
-		intel_dp->last_power_cycle = jiffies;
+		intel_dp->panel_power_off_time = ktime_get_boottime();
 
 	power_domain = intel_display_port_aux_power_domain(intel_encoder);
 	intel_display_power_put(dev_priv, power_domain);
@@ -2118,7 +2127,7 @@ static void edp_panel_off(struct intel_dp *intel_dp)
 	I915_WRITE(pp_ctrl_reg, pp);
 	POSTING_READ(pp_ctrl_reg);
 
-	intel_dp->last_power_cycle = jiffies;
+	intel_dp->panel_power_off_time = ktime_get_boottime();
 	wait_panel_off(intel_dp);
 
 	/* We got a reference when we enabled the VDD. */
@@ -5122,7 +5131,7 @@ intel_dp_add_properties(struct intel_dp *intel_dp, struct drm_connector *connect
 
 static void intel_dp_init_panel_power_timestamps(struct intel_dp *intel_dp)
 {
-	intel_dp->last_power_cycle = jiffies;
+	intel_dp->panel_power_off_time = ktime_get_boottime();
 	intel_dp->last_power_on = jiffies;
 	intel_dp->last_backlight_off = jiffies;
 }
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index bdfe403..06b37b8 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -793,9 +793,9 @@ struct intel_dp {
 	int backlight_off_delay;
 	struct delayed_work panel_vdd_work;
 	bool want_panel_vdd;
-	unsigned long last_power_cycle;
 	unsigned long last_power_on;
 	unsigned long last_backlight_off;
+	ktime_t panel_power_off_time;
 
 	struct notifier_block edp_notifier;
 
-- 
1.9.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

             reply	other threads:[~2016-01-13  1:57 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-01-13  1:57 abhay.kumar [this message]
2016-01-13  8:02 ` [PATCH v4] drm/i915: edp resume/On time optimization Kumar, Shobhit
2016-01-13 10:20 ` ✗ warning: Fi.CI.BAT Patchwork
2016-01-14 23:53 ` [PATCH v4] drm/i915: edp resume/On time optimization Kumar, Abhay
2016-01-19 22:37 ` Kumar, Abhay
2016-01-20  9:00   ` Daniel Vetter
2016-01-20  9:59     ` Kumar, Shobhit
2016-01-20 13:06       ` Ville Syrjälä
2016-01-21 12:17         ` Kumar, Abhay
2016-01-22  5:48           ` Kumar, Shobhit
2016-01-31  7:20             ` Kumar, Abhay
2016-01-23  1:39 ` [PATCH V5] " abhay.kumar
2016-02-12  1:58   ` Kumar, Abhay
2016-02-12 16:07   ` Daniel Vetter
2016-01-23  8:43 ` ✗ Fi.CI.BAT: failure for drm/i915: edp resume/On time optimization. (rev10) Patchwork
2016-01-26 11:36   ` Ville Syrjälä
2016-01-27  0:21     ` Kumar, Abhay
2016-01-28 12:32 ` ✗ Fi.CI.BAT: warning " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1452650255-11125-1-git-send-email-abhay.kumar@intel.com \
    --to=abhay.kumar@intel.com \
    --cc=Intel-gfx@lists.freedesktop.org \
    --cc=ville.syrjala@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.