All of lore.kernel.org
 help / color / mirror / Atom feed
From: Teresa Remmet <t.remmet@phytec.de>
To: netdev@vger.kernel.org
Cc: Florian Fainelli <f.fainelli@gmail.com>,
	linux-kernel@vger.kernel.org,
	"David S. Miller" <davem@davemloft.net>,
	Andrew Lunn <andrew@lunn.ch>
Subject: [PATCH v2] net: phy: smsc: Fix disabling energy detect mode
Date: Tue, 19 Jan 2016 08:56:39 +0100	[thread overview]
Message-ID: <1453190199-22269-1-git-send-email-t.remmet@phytec.de> (raw)

When the lan87xx_read_status function is getting called the
energy detect mode is enabled again even if it has been
disabled by device tree.

Added private struct to check the energy detect status.

Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
---
Changes since v1:
- reordered variable definition
- moved private variable into a struct for better readability 
- deleted smsc_phy_remove fuction as it is not needed

 drivers/net/phy/smsc.c | 53 ++++++++++++++++++++++++++++++++++++++++----------
 1 file changed, 43 insertions(+), 10 deletions(-)

diff --git a/drivers/net/phy/smsc.c b/drivers/net/phy/smsc.c
index e485f26..79fcb48 100644
--- a/drivers/net/phy/smsc.c
+++ b/drivers/net/phy/smsc.c
@@ -24,6 +24,10 @@
 #include <linux/netdevice.h>
 #include <linux/smscphy.h>
 
+struct smsc_phy_priv {
+	bool energy_enable:1;
+};
+
 static int smsc_phy_config_intr(struct phy_device *phydev)
 {
 	int rc = phy_write (phydev, MII_LAN83C185_IM,
@@ -43,19 +47,14 @@ static int smsc_phy_ack_interrupt(struct phy_device *phydev)
 
 static int smsc_phy_config_init(struct phy_device *phydev)
 {
-	int __maybe_unused len;
-	struct device *dev __maybe_unused = &phydev->mdio.dev;
-	struct device_node *of_node __maybe_unused = dev->of_node;
+	struct smsc_phy_priv *priv = phydev->priv;
+
 	int rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS);
-	int enable_energy = 1;
 
 	if (rc < 0)
 		return rc;
 
-	if (of_find_property(of_node, "smsc,disable-energy-detect", &len))
-		enable_energy = 0;
-
-	if (enable_energy) {
+	if (priv->energy_enable) {
 		/* Enable energy detect mode for this SMSC Transceivers */
 		rc = phy_write(phydev, MII_LAN83C185_CTRL_STATUS,
 			       rc | MII_LAN83C185_EDPWRDOWN);
@@ -110,10 +109,13 @@ static int lan911x_config_init(struct phy_device *phydev)
  */
 static int lan87xx_read_status(struct phy_device *phydev)
 {
+	struct smsc_phy_priv *priv = phydev->priv;
+
 	int err = genphy_read_status(phydev);
-	int i;
 
-	if (!phydev->link) {
+	if (!phydev->link && priv->energy_enable) {
+		int i;
+
 		/* Disable EDPD to wake up PHY */
 		int rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS);
 		if (rc < 0)
@@ -149,6 +151,25 @@ static int lan87xx_read_status(struct phy_device *phydev)
 	return err;
 }
 
+static int smsc_phy_probe(struct phy_device *phydev)
+{
+	struct device *dev = &phydev->mdio.dev;
+	struct device_node *of_node __maybe_unused = dev->of_node;
+	struct smsc_phy_priv *priv;
+	int __maybe_unused len;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	if (of_find_property(of_node, "smsc,disable-energy-detect", &len))
+		priv->energy_enable = false;
+
+	phydev->priv = priv;
+
+	return 0;
+}
+
 static struct phy_driver smsc_phy_driver[] = {
 {
 	.phy_id		= 0x0007c0a0, /* OUI=0x00800f, Model#=0x0a */
@@ -159,6 +180,8 @@ static struct phy_driver smsc_phy_driver[] = {
 				| SUPPORTED_Asym_Pause),
 	.flags		= PHY_HAS_INTERRUPT | PHY_HAS_MAGICANEG,
 
+	.probe		= smsc_phy_probe,
+
 	/* basic functions */
 	.config_aneg	= genphy_config_aneg,
 	.read_status	= genphy_read_status,
@@ -180,6 +203,8 @@ static struct phy_driver smsc_phy_driver[] = {
 				| SUPPORTED_Asym_Pause),
 	.flags		= PHY_HAS_INTERRUPT | PHY_HAS_MAGICANEG,
 
+	.probe		= smsc_phy_probe,
+
 	/* basic functions */
 	.config_aneg	= genphy_config_aneg,
 	.read_status	= genphy_read_status,
@@ -201,6 +226,8 @@ static struct phy_driver smsc_phy_driver[] = {
 				| SUPPORTED_Asym_Pause),
 	.flags		= PHY_HAS_INTERRUPT | PHY_HAS_MAGICANEG,
 
+	.probe		= smsc_phy_probe,
+
 	/* basic functions */
 	.config_aneg	= genphy_config_aneg,
 	.read_status	= lan87xx_read_status,
@@ -222,6 +249,8 @@ static struct phy_driver smsc_phy_driver[] = {
 				| SUPPORTED_Asym_Pause),
 	.flags		= PHY_HAS_INTERRUPT | PHY_HAS_MAGICANEG,
 
+	.probe		= smsc_phy_probe,
+
 	/* basic functions */
 	.config_aneg	= genphy_config_aneg,
 	.read_status	= genphy_read_status,
@@ -242,6 +271,8 @@ static struct phy_driver smsc_phy_driver[] = {
 				| SUPPORTED_Asym_Pause),
 	.flags		= PHY_HAS_INTERRUPT | PHY_HAS_MAGICANEG,
 
+	.probe		= smsc_phy_probe,
+
 	/* basic functions */
 	.config_aneg	= genphy_config_aneg,
 	.read_status	= lan87xx_read_status,
@@ -263,6 +294,8 @@ static struct phy_driver smsc_phy_driver[] = {
 				| SUPPORTED_Asym_Pause),
 	.flags		= PHY_HAS_INTERRUPT | PHY_HAS_MAGICANEG,
 
+	.probe		= smsc_phy_probe,
+
 	/* basic functions */
 	.config_aneg	= genphy_config_aneg,
 	.read_status	= lan87xx_read_status,
-- 
1.9.1

             reply	other threads:[~2016-01-19  7:57 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-01-19  7:56 Teresa Remmet [this message]
2016-01-19 15:25 ` [PATCH v2] net: phy: smsc: Fix disabling energy detect mode Andrew Lunn
2016-01-19 19:31   ` David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1453190199-22269-1-git-send-email-t.remmet@phytec.de \
    --to=t.remmet@phytec.de \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=f.fainelli@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.