From mboxrd@z Thu Jan 1 00:00:00 1970 From: johannes@sipsolutions.net (Johannes Berg) Date: Sun, 24 Jan 2016 17:02:26 +0100 Subject: [PATCH 2/2] arm/mach-imx: enable big endian mode In-Reply-To: <1453651346-12760-1-git-send-email-johannes@sipsolutions.net> References: <1453651346-12760-1-git-send-email-johannes@sipsolutions.net> Message-ID: <1453651346-12760-2-git-send-email-johannes@sipsolutions.net> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Enable ARM big-endian mode on mach-imx. This requires adding some byte swapping in the debug functions (which otherwise hang forever) and of course the secondary core bringup. Tested (on top of 4.4) on i.MX6 HummingBoard quad-core (IMX6Q). The patch is pretty much as suggested by Arnd Bergmann, thanks! Signed-off-by: Johannes Berg --- arch/arm/include/debug/imx.S | 3 +++ arch/arm/mach-imx/Kconfig | 1 + arch/arm/mach-imx/headsmp.S | 2 ++ 3 files changed, 6 insertions(+) diff --git a/arch/arm/include/debug/imx.S b/arch/arm/include/debug/imx.S index 619d8cc1ac12..92c44760d656 100644 --- a/arch/arm/include/debug/imx.S +++ b/arch/arm/include/debug/imx.S @@ -11,6 +11,7 @@ * */ +#include #include "imx-uart.h" /* @@ -34,6 +35,7 @@ .endm .macro senduart,rd,rx + ARM_BE8(rev \rd, \rd) str \rd, [\rx, #0x40] @ TXDATA .endm @@ -42,6 +44,7 @@ .macro busyuart,rd,rx 1002: ldr \rd, [\rx, #0x98] @ SR2 + ARM_BE8(rev \rd, \rd) tst \rd, #1 << 3 @ TXDC beq 1002b @ wait until transmit done .endm diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 8ceda2844c4f..c98138bc1cea 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -8,6 +8,7 @@ menuconfig ARCH_MXC select PM_OPP if PM select SOC_BUS select SRAM + select ARCH_SUPPORTS_BIG_ENDIAN help Support for Freescale MXC/iMX-based family of processors diff --git a/arch/arm/mach-imx/headsmp.S b/arch/arm/mach-imx/headsmp.S index b5e976816b63..6c28d28b3c64 100644 --- a/arch/arm/mach-imx/headsmp.S +++ b/arch/arm/mach-imx/headsmp.S @@ -12,6 +12,7 @@ #include #include +#include diag_reg_offset: .word g_diag_reg - . @@ -25,6 +26,7 @@ diag_reg_offset: .endm ENTRY(v7_secondary_startup) +ARM_BE8(setend be) @ go BE8 if entered LE set_diag_reg b secondary_startup ENDPROC(v7_secondary_startup) -- 2.6.2