From: zajec5@gmail.com (Rafał Miłecki)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: BCM5301X: Add DT for D-Link DIR-885L
Date: Sun, 24 Jan 2016 22:29:24 +0100 [thread overview]
Message-ID: <1453670964-23572-1-git-send-email-zajec5@gmail.com> (raw)
Signed-off-by: Rafa? Mi?ecki <zajec5@gmail.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/bcm47094-dlink-885l.dts | 112 ++++++++++++++++++++++++++++++
2 files changed, 113 insertions(+)
create mode 100644 arch/arm/boot/dts/bcm47094-dlink-885l.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index eab8a7f..bf9c185 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -76,6 +76,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
bcm4709-buffalo-wxr-1900dhp.dtb \
bcm4709-netgear-r7000.dtb \
bcm4709-netgear-r8000.dtb \
+ bcm47094-dlink-885l.dtb \
bcm94708.dtb \
bcm94709.dtb \
bcm953012k.dtb
diff --git a/arch/arm/boot/dts/bcm47094-dlink-885l.dts b/arch/arm/boot/dts/bcm47094-dlink-885l.dts
new file mode 100644
index 0000000..bc622d9
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47094-dlink-885l.dts
@@ -0,0 +1,112 @@
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for D-Link DIR-885L
+ *
+ * Copyright (C) 2016 Rafa? Mi?ecki <zajec5@gmail.com>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+ compatible = "dlink,dir-885l", "brcm,bcm47094", "brcm,bcm4708";
+ model = "D-Link DIR-885L";
+
+ chosen {
+ bootargs = "console=ttyS0,115200 earlyprintk";
+ };
+
+ memory {
+ reg = <0x00000000 0x08000000
+ 0x88000000 0x08000000>;
+ };
+
+ nand: nand at 18028000 {
+ nandcs at 0 {
+ partition at 0 {
+ label = "firmware";
+ reg = <0x00000000 0x08000000>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power-white {
+ label = "bcm53xx:white:power";
+ gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-on";
+ };
+
+ wan-white {
+ label = "bcm53xx:white:wan";
+ gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
+
+ power-amber {
+ label = "bcm53xx:amber:power";
+ gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
+
+ wan-amber {
+ label = "bcm53xx:amber:wan";
+ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
+
+ usb3-white {
+ label = "bcm53xx:white:usb3";
+ gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
+
+ 2ghz {
+ label = "bcm53xx:white:2ghz";
+ gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
+
+ 5ghz {
+ label = "bcm53xx:white:5ghz";
+ gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ wps {
+ label = "WPS";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+ };
+
+ /* Switch: router / extender */
+ extender {
+ label = "Extender";
+ linux,code = <BTN_0>;
+ gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+ };
+
+ restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&uart0 {
+ status = "okay";
+ clock-frequency = <125000000>;
+};
--
1.8.4.5
next reply other threads:[~2016-01-24 21:29 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-24 21:29 Rafał Miłecki [this message]
2016-01-26 22:02 ` [PATCH V2] ARM: BCM5301X: Add DT for D-Link DIR-885L Rafał Miłecki
2016-01-26 22:23 ` Florian Fainelli
2016-01-26 22:35 ` [PATCH V3] " Rafał Miłecki
2016-01-26 23:54 ` Florian Fainelli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1453670964-23572-1-git-send-email-zajec5@gmail.com \
--to=zajec5@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.