From: Suganath prabu Subaramani <suganath-prabu.subramani@avagotech.com>
To: JBottomley@Parallels.com, jejb@kernel.org, hch@infradead.org
Cc: martin.petersen@oracle.com, linux-scsi@vger.kernel.org,
Sathya.Prakash@avagotech.com, kashyap.desai@avagotech.com,
krishnaraddi.mankani@avagotech.com, linux-kernel@vger.kernel.org,
suganath-prabu.subramani@avagotech.com,
chaitra.basappa@avagotech.com, sreekanth.reddy@avagotech.com
Subject: [mpt3sas driver 08/10] mpt3sas: Updated MPI Header to 2.00.42
Date: Thu, 28 Jan 2016 12:07:05 +0530 [thread overview]
Message-ID: <1453963027-19770-9-git-send-email-suganath-prabu.subramani@avagotech.com> (raw)
In-Reply-To: <1453963027-19770-1-git-send-email-suganath-prabu.subramani@avagotech.com>
From: Suganath prabu Subramani <suganath-prabu.subramani@avagotech.com>
Updated MPI version and MPI header files.
Signed-off-by: Suganath prabu Subramani <suganath-prabu.subramani@avagotech.com>
Signed-off-by: Chaitra P B <chaitra.basappa@avagotech.com>
---
drivers/scsi/mpt3sas/mpi/mpi2.h | 8 +++++---
drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h | 7 +++++--
drivers/scsi/mpt3sas/mpi/mpi2_init.h | 3 ++-
drivers/scsi/mpt3sas/mpi/mpi2_ioc.h | 2 +-
drivers/scsi/mpt3sas/mpi/mpi2_sas.h | 2 +-
5 files changed, 14 insertions(+), 8 deletions(-)
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2.h b/drivers/scsi/mpt3sas/mpi/mpi2.h
index 367e6ac..dfad5b8 100644
--- a/drivers/scsi/mpt3sas/mpi/mpi2.h
+++ b/drivers/scsi/mpt3sas/mpi/mpi2.h
@@ -8,7 +8,7 @@
* scatter/gather formats.
* Creation Date: June 21, 2006
*
- * mpi2.h Version: 02.00.37
+ * mpi2.h Version: 02.00.39
*
* NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
* prefix are for use only on MPI v2.5 products, and must not be used
@@ -94,10 +94,12 @@
* 06-13-14 02.00.35 Bumped MPI2_HEADER_VERSION_UNIT.
* 11-18-14 02.00.36 Updated copyright information.
* Bumped MPI2_HEADER_VERSION_UNIT.
- * 03-xx-15 02.00.37 Bumped MPI2_HEADER_VERSION_UNIT.
+ * 03-16-15 02.00.37 Bumped MPI2_HEADER_VERSION_UNIT.
* Added Scratchpad registers to
* MPI2_SYSTEM_INTERFACE_REGS.
* Added MPI2_DIAG_SBR_RELOAD.
+ * 03-19-15 02.00.38 Bumped MPI2_HEADER_VERSION_UNIT.
+ * 05-25-15 02.00.39 Bumped MPI2_HEADER_VERSION_UNIT.
* --------------------------------------------------------------------------
*/
@@ -137,7 +139,7 @@
#define MPI2_VERSION_02_06 (0x0206)
/*Unit and Dev versioning for this MPI header set */
-#define MPI2_HEADER_VERSION_UNIT (0x23)
+#define MPI2_HEADER_VERSION_UNIT (0x27)
#define MPI2_HEADER_VERSION_DEV (0x00)
#define MPI2_HEADER_VERSION_UNIT_MASK (0xFF00)
#define MPI2_HEADER_VERSION_UNIT_SHIFT (8)
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h b/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h
index 43a6fe9..9cf09bf 100644
--- a/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h
+++ b/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h
@@ -6,7 +6,7 @@
* Title: MPI Configuration messages and pages
* Creation Date: November 10, 2006
*
- * mpi2_cnfg.h Version: 02.00.31
+ * mpi2_cnfg.h Version: 02.00.33
*
* NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
* prefix are for use only on MPI v2.5 products, and must not be used
@@ -182,8 +182,10 @@
* 11-18-14 02.00.30 Updated copyright information.
* Added MPI2_BIOSPAGE1_OPTIONS_ADVANCED_CONFIG.
* Added AdapterOrderAux fields to BIOS Page 3.
- * 03-xx-15 02.00.31 Updated for MPI v2.6.
+ * 03-16-15 02.00.31 Updated for MPI v2.6.
* Added new SAS Phy Event codes
+ * 05-25-15 02.00.33 Added more defines for the BiosOptions field of
+ * MPI2_CONFIG_PAGE_BIOS_1.
* --------------------------------------------------------------------------
*/
@@ -1412,6 +1414,7 @@ typedef struct _MPI2_CONFIG_PAGE_BIOS_1 {
#define MPI2_BIOSPAGE1_PAGEVERSION (0x07)
/*values for BIOS Page 1 BiosOptions field */
+#define MPI2_BIOSPAGE1_OPTIONS_BOOT_LIST_ADD_ALT_BOOT_DEVICE (0x00008000)
#define MPI2_BIOSPAGE1_OPTIONS_ADVANCED_CONFIG (0x00004000)
#define MPI2_BIOSPAGE1_OPTIONS_PNS_MASK (0x00003800)
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_init.h b/drivers/scsi/mpt3sas/mpi/mpi2_init.h
index 4916699..c38f624 100644
--- a/drivers/scsi/mpt3sas/mpi/mpi2_init.h
+++ b/drivers/scsi/mpt3sas/mpi/mpi2_init.h
@@ -47,7 +47,8 @@
* 04-09-13 02.00.15 Added SCSIStatusQualifier field to MPI2_SCSI_IO_REPLY,
* replacing the Reserved4 field.
* 11-18-14 02.00.16 Updated copyright information.
- * 03-xx-15 02.00.17 Updated for MPI v2.6.
+ * 03-16-15 02.00.17 Updated for MPI v2.6.
+ * Added MPI26_SCSIIO_IOFLAGS_ESCAPE_PASSTHROUGH.
* Added MPI2_SEP_REQ_SLOTSTATUS_DEV_OFF and
* MPI2_SEP_REPLY_SLOTSTATUS_DEV_OFF.
* --------------------------------------------------------------------------
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h b/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h
index 26e1ba4..cf510ed 100644
--- a/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h
+++ b/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h
@@ -134,7 +134,7 @@
* Added Encrypted Hash Extended Image.
* 12-05-13 02.00.24 Added MPI25_HASH_IMAGE_TYPE_BIOS.
* 11-18-14 02.00.25 Updated copyright information.
- * 03-xx-15 02.00.26 Added MPI26_FW_HEADER_PID_FAMILY_3324_SAS and
+ * 03-16-15 02.00.26 Added MPI26_FW_HEADER_PID_FAMILY_3324_SAS and
* MPI26_FW_HEADER_PID_FAMILY_3516_SAS.
* Added MPI26_CTRL_OP_SHUTDOWN.
* --------------------------------------------------------------------------
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_sas.h b/drivers/scsi/mpt3sas/mpi/mpi2_sas.h
index 43dfeed..c10c2c0 100644
--- a/drivers/scsi/mpt3sas/mpi/mpi2_sas.h
+++ b/drivers/scsi/mpt3sas/mpi/mpi2_sas.h
@@ -33,7 +33,7 @@
* 08-19-13 02.00.08 Made MPI2_SAS_OP_TRANSMIT_PORT_SELECT_SIGNAL obsolete
* for anything newer than MPI v2.0.
* 11-18-14 02.00.09 Updated copyright information.
- * 03-xx-145 02.00.10 Updated for MPI v2.6.
+ * 03-16-15 02.00.10 Updated for MPI v2.6.
* Added MPI2_SATA_PT_REQ_PT_FLAGS_FPDMA.
* --------------------------------------------------------------------------
*/
--
1.8.3.1
next prev parent reply other threads:[~2016-01-28 6:39 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-28 6:36 [mpt3sas driver patches 00/10] mpt3sas driver enhancements and Suganath prabu Subaramani
2016-01-28 6:36 ` [mpt3sas driver 01/10] mpt3sas: Added support for high port count HBA variants Suganath prabu Subaramani
2016-02-04 14:14 ` Tomas Henzl
2016-02-04 14:14 ` Tomas Henzl
2016-01-28 6:36 ` [mpt3sas driver 02/10] mpt3sas: Used IEEE SGL instead of MPI SGL while framing a SMP Passthrough request message Suganath prabu Subaramani
2016-01-28 9:16 ` Christoph Hellwig
2016-02-04 14:18 ` Tomas Henzl
2016-02-04 14:18 ` Tomas Henzl
2016-01-28 6:37 ` [mpt3sas driver 03/10] mpt3sas: Fix static analyzer(coverity) tool identified defects Suganath prabu Subaramani
2016-02-04 14:18 ` Tomas Henzl
2016-02-04 14:18 ` Tomas Henzl
2016-01-28 6:37 ` [mpt3sas driver 04/10] mpt3sas: Never block the Enclosure device Suganath prabu Subaramani
2016-02-04 14:19 ` Tomas Henzl
2016-02-04 14:19 ` Tomas Henzl
2016-01-28 6:37 ` [mpt3sas driver 05/10] mpt3sas: Make use of additional HighPriority credit message frames for sending SCSI IO's Suganath prabu Subaramani
2016-02-04 14:24 ` Tomas Henzl
2016-02-04 14:24 ` Tomas Henzl
2016-01-28 6:37 ` [mpt3sas driver 06/10] mpt3sas: Added smp_affinity_enable module parameter Suganath prabu Subaramani
2016-02-04 15:01 ` Tomas Henzl
2016-02-04 15:01 ` Tomas Henzl
2016-02-08 6:01 ` Suganath Prabu Subramani
2016-02-08 6:01 ` Suganath Prabu Subramani
2016-02-08 12:38 ` Tomas Henzl
2016-02-08 12:38 ` Tomas Henzl
2016-01-28 6:37 ` [mpt3sas driver 07/10] mpt3sas: Add support for configurable Chain Frame Size Suganath prabu Subaramani
2016-02-04 15:05 ` Tomas Henzl
2016-02-04 15:05 ` Tomas Henzl
2016-02-05 7:56 ` Sreekanth Reddy
2016-02-05 7:56 ` Sreekanth Reddy
2016-02-08 13:55 ` Tomas Henzl
2016-02-08 13:55 ` Tomas Henzl
2016-01-28 6:37 ` Suganath prabu Subaramani [this message]
2016-02-04 15:06 ` [mpt3sas driver 08/10] mpt3sas: Updated MPI Header to 2.00.42 Tomas Henzl
2016-02-04 15:06 ` Tomas Henzl
2016-01-28 6:37 ` [mpt3sas driver 09/10] mpt3sas: Fix for Asynchronous completion of timedout IO and task abort of timedout IO Suganath prabu Subaramani
2016-02-04 15:07 ` Tomas Henzl
2016-02-04 15:07 ` Tomas Henzl
2016-01-28 6:37 ` [mpt3sas driver 10/10] mpt3sas: Updating mpt3sas driver version to 12.100.00.00 Suganath prabu Subaramani
2016-02-04 15:08 ` Tomas Henzl
2016-02-04 15:08 ` Tomas Henzl
2016-02-05 2:04 ` [mpt3sas driver patches 00/10] mpt3sas driver enhancements and Martin K. Petersen
2016-02-10 17:20 ` Martin K. Petersen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1453963027-19770-9-git-send-email-suganath-prabu.subramani@avagotech.com \
--to=suganath-prabu.subramani@avagotech.com \
--cc=JBottomley@Parallels.com \
--cc=Sathya.Prakash@avagotech.com \
--cc=chaitra.basappa@avagotech.com \
--cc=hch@infradead.org \
--cc=jejb@kernel.org \
--cc=kashyap.desai@avagotech.com \
--cc=krishnaraddi.mankani@avagotech.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=sreekanth.reddy@avagotech.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.