All of lore.kernel.org
 help / color / mirror / Atom feed
From: David Gibson <david@gibson.dropbear.id.au>
To: paulus@samba.org, mpe@ellerman.id.au, benh@kernel.crashing.org
Cc: linuxppc-dev@lists.ozlabs.org, aik@ozlabs.ru, thuth@redhat.com,
	lvivier@redhat.com, David Gibson <david@gibson.dropbear.id.au>
Subject: [RFCv2 3/9] arch/powerpc: Handle removing maybe-present bolted HPTEs
Date: Fri, 29 Jan 2016 16:23:57 +1100	[thread overview]
Message-ID: <1454045043-25545-4-git-send-email-david@gibson.dropbear.id.au> (raw)
In-Reply-To: <1454045043-25545-1-git-send-email-david@gibson.dropbear.id.au>

At the moment the hpte_removebolted callback in ppc_md returns void and
will BUG_ON() if the hpte it's asked to remove doesn't exist in the first
place.  This is awkward for the case of cleaning up a mapping which was
partially made before failing.

So, we add a return value to hpte_removebolted, and have it return ENOENT
in the case that the HPTE to remove didn't exist in the first place.

In the (sole) caller, we propagate errors in hpte_removebolted to its
caller to handle.  However, we handle ENOENT specially, continuing to
complete the unmapping over the specified range before returning the error
to the caller.

This means that htab_remove_mapping() will work sanely on a partially
present mapping, removing any HPTEs which are present, while also returning
ENOENT to its caller in case it's important there.

There are two callers of htab_remove_mapping():
   - In remove_section_mapping() we already WARN_ON() any error return,
     which is reasonable - in this case the mapping should be fully
     present
   - In vmemmap_remove_mapping() we BUG_ON() any error.  We change that to
     just a WARN_ON() in the case of ENOENT, since failing to remove a
     mapping that wasn't there in the first place probably shouldn't be
     fatal.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
---
 arch/powerpc/include/asm/machdep.h    |  2 +-
 arch/powerpc/mm/hash_utils_64.c       | 10 +++++++---
 arch/powerpc/mm/init_64.c             |  9 +++++----
 arch/powerpc/platforms/pseries/lpar.c |  7 +++++--
 4 files changed, 18 insertions(+), 10 deletions(-)

diff --git a/arch/powerpc/include/asm/machdep.h b/arch/powerpc/include/asm/machdep.h
index 3f191f5..a7d3f66 100644
--- a/arch/powerpc/include/asm/machdep.h
+++ b/arch/powerpc/include/asm/machdep.h
@@ -54,7 +54,7 @@ struct machdep_calls {
 				       int psize, int apsize,
 				       int ssize);
 	long		(*hpte_remove)(unsigned long hpte_group);
-	void            (*hpte_removebolted)(unsigned long ea,
+	long            (*hpte_removebolted)(unsigned long ea,
 					     int psize, int ssize);
 	void		(*flush_hash_range)(unsigned long number, int local);
 	void		(*hugepage_invalidate)(unsigned long vsid,
diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c
index 9f7d727..0737eae 100644
--- a/arch/powerpc/mm/hash_utils_64.c
+++ b/arch/powerpc/mm/hash_utils_64.c
@@ -269,6 +269,7 @@ int htab_remove_mapping(unsigned long vstart, unsigned long vend,
 {
 	unsigned long vaddr;
 	unsigned int step, shift;
+	int rc = 0;
 
 	shift = mmu_psize_defs[psize].shift;
 	step = 1 << shift;
@@ -276,10 +277,13 @@ int htab_remove_mapping(unsigned long vstart, unsigned long vend,
 	if (!ppc_md.hpte_removebolted)
 		return -ENODEV;
 
-	for (vaddr = vstart; vaddr < vend; vaddr += step)
-		ppc_md.hpte_removebolted(vaddr, psize, ssize);
+	for (vaddr = vstart; vaddr < vend; vaddr += step) {
+		rc = ppc_md.hpte_removebolted(vaddr, psize, ssize);
+		if ((rc < 0) && (rc != -ENOENT))
+			return rc;
+	}
 
-	return 0;
+	return rc;
 }
 #endif /* CONFIG_MEMORY_HOTPLUG */
 
diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c
index 379a6a9..baa1a23 100644
--- a/arch/powerpc/mm/init_64.c
+++ b/arch/powerpc/mm/init_64.c
@@ -232,10 +232,11 @@ static void __meminit vmemmap_create_mapping(unsigned long start,
 static void vmemmap_remove_mapping(unsigned long start,
 				   unsigned long page_size)
 {
-	int mapped = htab_remove_mapping(start, start + page_size,
-					 mmu_vmemmap_psize,
-					 mmu_kernel_ssize);
-	BUG_ON(mapped < 0);
+	int rc = htab_remove_mapping(start, start + page_size,
+				     mmu_vmemmap_psize,
+				     mmu_kernel_ssize);
+	BUG_ON((rc < 0) && (rc != -ENOENT));
+	WARN_ON(rc == -ENOENT);
 }
 #endif
 
diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c
index 477290a..92d472d 100644
--- a/arch/powerpc/platforms/pseries/lpar.c
+++ b/arch/powerpc/platforms/pseries/lpar.c
@@ -505,7 +505,7 @@ static void pSeries_lpar_hugepage_invalidate(unsigned long vsid,
 }
 #endif
 
-static void pSeries_lpar_hpte_removebolted(unsigned long ea,
+static long pSeries_lpar_hpte_removebolted(unsigned long ea,
 					   int psize, int ssize)
 {
 	unsigned long vpn;
@@ -515,11 +515,14 @@ static void pSeries_lpar_hpte_removebolted(unsigned long ea,
 	vpn = hpt_vpn(ea, vsid, ssize);
 
 	slot = pSeries_lpar_hpte_find(vpn, psize, ssize);
-	BUG_ON(slot == -1);
+	if (slot == -1)
+		return -ENOENT;
+
 	/*
 	 * lpar doesn't use the passed actual page size
 	 */
 	pSeries_lpar_hpte_invalidate(slot, vpn, psize, 0, ssize, 0);
+	return 0;
 }
 
 /*
-- 
2.5.0

  parent reply	other threads:[~2016-01-29  5:23 UTC|newest]

Thread overview: 42+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-01-29  5:23 [RFCv2 0/9] PAPR hash page table resizing (guest side) David Gibson
2016-01-29  5:23 ` [RFCv2 1/9] memblock: Don't mark memblock_phys_mem_size() as __init David Gibson
2016-02-01  5:50   ` Anshuman Khandual
2016-02-08  2:46   ` Paul Mackerras
2016-01-29  5:23 ` [RFCv2 2/9] arch/powerpc: Clean up error handling for htab_remove_mapping David Gibson
2016-02-01  5:54   ` Anshuman Khandual
2016-02-08  2:48   ` Paul Mackerras
2016-01-29  5:23 ` David Gibson [this message]
2016-02-01  5:58   ` [RFCv2 3/9] arch/powerpc: Handle removing maybe-present bolted HPTEs Anshuman Khandual
2016-02-02  1:08     ` David Gibson
2016-02-02 13:49   ` Denis Kirjanov
2016-02-08  2:54   ` Paul Mackerras
2016-02-09  0:43     ` David Gibson
2016-01-29  5:23 ` [RFCv2 4/9] arch/powerpc: Clean up memory hotplug failure paths David Gibson
2016-02-01  6:29   ` Anshuman Khandual
2016-02-02 15:04   ` Nathan Fontenot
2016-02-03  4:31     ` David Gibson
2016-02-08  5:47   ` Paul Mackerras
2016-01-29  5:23 ` [RFCv2 5/9] arch/powerpc: Split hash page table sizing heuristic into a helper David Gibson
2016-02-01  7:04   ` Anshuman Khandual
2016-02-02  1:04     ` David Gibson
2016-02-04 10:56       ` Anshuman Khandual
2016-02-08  5:57         ` Paul Mackerras
2016-01-29  5:24 ` [RFCv2 6/9] pseries: Add hypercall wrappers for hash page table resizing David Gibson
2016-02-01  7:11   ` Anshuman Khandual
2016-02-02  0:58     ` David Gibson
2016-02-04 11:11       ` Anshuman Khandual
2016-02-07 22:33         ` David Gibson
2016-02-08  5:58   ` Paul Mackerras
2016-01-29  5:24 ` [RFCv2 7/9] pseries: Add support for hash " David Gibson
2016-02-01  8:31   ` Anshuman Khandual
2016-02-01 11:04     ` David Gibson
2016-02-08  5:59   ` Paul Mackerras
2016-01-29  5:24 ` [RFCv2 8/9] pseries: Advertise HPT resizing support via CAS David Gibson
2016-02-01  8:36   ` Anshuman Khandual
2016-02-08  6:00   ` Paul Mackerras
2016-01-29  5:24 ` [RFCv2 9/9] pseries: Automatically resize HPT for memory hot add/remove David Gibson
2016-02-01  8:51   ` Anshuman Khandual
2016-02-01 10:55     ` David Gibson
2016-02-08  6:01   ` Paul Mackerras
2016-02-01  5:50 ` [RFCv2 0/9] PAPR hash page table resizing (guest side) Anshuman Khandual
2016-02-02  0:57   ` David Gibson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1454045043-25545-4-git-send-email-david@gibson.dropbear.id.au \
    --to=david@gibson.dropbear.id.au \
    --cc=aik@ozlabs.ru \
    --cc=benh@kernel.crashing.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=lvivier@redhat.com \
    --cc=mpe@ellerman.id.au \
    --cc=paulus@samba.org \
    --cc=thuth@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.