All of lore.kernel.org
 help / color / mirror / Atom feed
From: Wen Congyang <wency@cn.fujitsu.com>
To: xen devel <xen-devel@lists.xen.org>,
	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>,
	Andrew Cooper <andrew.cooper3@citrix.com>,
	Ian Campbell <ian.campbell@citrix.com>,
	Ian Jackson <ian.jackson@eu.citrix.com>,
	Wei Liu <wei.liu2@citrix.com>
Cc: Lars Kurth <lars.kurth@citrix.com>,
	Changlong Xie <xiecl.fnst@cn.fujitsu.com>,
	Wen Congyang <wency@cn.fujitsu.com>,
	Gui Jianfeng <guijianfeng@cn.fujitsu.com>,
	Jiang Yunhong <yunhong.jiang@intel.com>,
	Dong Eddie <eddie.dong@intel.com>,
	Shriram Rajagopalan <rshriram@cs.ubc.ca>,
	Yang Hongyang <hongyang.yang@easystack.cn>
Subject: [PATCH v7 11/18] tools/libxl: Add back channel to allow migration target send data back
Date: Fri, 29 Jan 2016 13:27:27 +0800	[thread overview]
Message-ID: <1454045254-3711-12-git-send-email-wency@cn.fujitsu.com> (raw)
In-Reply-To: <1454045254-3711-1-git-send-email-wency@cn.fujitsu.com>

In COLO mode, secondary needs to send the following data to primary:
1. In libxl
   Secondary sends the following CHECKPOINT_CONTEXT to primary:
   CHECKPOINT_SVM_SUSPENDED, CHECKPOINT_SVM_READY and CHECKPOINT_SVM_RESUMED
2. In libxc
   Secondary sends the dirty pfn list to primary

But the io_fd only can be written in primary, and only can be read in
secondary. Save recv_fd in domain_suspend_state, and send_fd in
domain_create_state. Extend libxl_domain_create_restore API, add a
send_fd param to it. Add LIBXL_HAVE_CREATE_RESTORE_SEND_FD to indicate
the API change.

Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Yang Hongyang <hongyang.yang@easystack.cn>
---
 tools/libxl/libxl.c                  |  2 +-
 tools/libxl/libxl.h                  | 30 ++++++++++++++++++++++++++++--
 tools/libxl/libxl_create.c           |  9 +++++----
 tools/libxl/libxl_internal.h         |  2 ++
 tools/libxl/xl_cmdimpl.c             |  8 +++++++-
 tools/ocaml/libs/xl/xenlight_stubs.c |  2 +-
 6 files changed, 44 insertions(+), 9 deletions(-)

diff --git a/tools/libxl/libxl.c b/tools/libxl/libxl.c
index fc7844d..e286329 100644
--- a/tools/libxl/libxl.c
+++ b/tools/libxl/libxl.c
@@ -871,7 +871,7 @@ int libxl_domain_remus_start(libxl_ctx *ctx, libxl_domain_remus_info *info,
     dss->callback = remus_failover_cb;
     dss->domid = domid;
     dss->fd = send_fd;
-    /* TODO do something with recv_fd */
+    dss->recv_fd = recv_fd;
     dss->type = type;
     dss->live = 1;
     dss->debug = 0;
diff --git a/tools/libxl/libxl.h b/tools/libxl/libxl.h
index 6225db1..5e4aede 100644
--- a/tools/libxl/libxl.h
+++ b/tools/libxl/libxl.h
@@ -639,6 +639,15 @@ typedef struct libxl__ctx libxl_ctx;
 #define LIBXL_HAVE_DOMAIN_CREATE_RESTORE_PARAMS 1
 
 /*
+ * LIBXL_HAVE_DOMAIN_CREATE_RESTORE_SEND_FD 1
+ *
+ * If this is defined, libxl_domain_create_restore()'s API has changed to
+ * include a send_fd param which used for libxl migration back channel
+ * during COLO.
+ */
+#define LIBXL_HAVE_DOMAIN_CREATE_RESTORE_SEND_FD 1
+
+/*
  * LIBXL_HAVE_CREATEINFO_PVH
  * If this is defined, then libxl supports creation of a PVH guest.
  */
@@ -1152,7 +1161,7 @@ int libxl_domain_create_new(libxl_ctx *ctx, libxl_domain_config *d_config,
                             const libxl_asyncprogress_how *aop_console_how)
                             LIBXL_EXTERNAL_CALLERS_ONLY;
 int libxl_domain_create_restore(libxl_ctx *ctx, libxl_domain_config *d_config,
-                                uint32_t *domid, int restore_fd,
+                                uint32_t *domid, int restore_fd, int send_fd,
                                 const libxl_domain_restore_params *params,
                                 const libxl_asyncop_how *ao_how,
                                 const libxl_asyncprogress_how *aop_console_how)
@@ -1173,7 +1182,7 @@ int static inline libxl_domain_create_restore_0x040200(
     libxl_domain_restore_params_init(&params);
 
     ret = libxl_domain_create_restore(
-        ctx, d_config, domid, restore_fd, &params, ao_how, aop_console_how);
+        ctx, d_config, domid, restore_fd, -1, &params, ao_how, aop_console_how);
 
     libxl_domain_restore_params_dispose(&params);
     return ret;
@@ -1181,6 +1190,23 @@ int static inline libxl_domain_create_restore_0x040200(
 
 #define libxl_domain_create_restore libxl_domain_create_restore_0x040200
 
+#elif defined(LIBXL_API_VERSION) && LIBXL_API_VERSION >= 0x040400 \
+                                 && LIBXL_API_VERSION < 0x040700
+
+int static inline libxl_domain_create_restore_0x040400(
+    libxl_ctx *ctx, libxl_domain_config *d_config,
+    uint32_t *domid, int restore_fd,
+    const libxl_domain_restore_params *params,
+    const libxl_asyncop_how *ao_how,
+    const libxl_asyncprogress_how *aop_console_how)
+    LIBXL_EXTERNAL_CALLERS_ONLY
+{
+    return libxl_domain_create_restore(ctx, d_config, domid, restore_fd,
+                                       -1, params, ao_how, aop_console_how);
+}
+
+#define libxl_domain_create_restore libxl_domain_create_restore_0x040400
+
 #endif
 
 int libxl_domain_soft_reset(libxl_ctx *ctx,
diff --git a/tools/libxl/libxl_create.c b/tools/libxl/libxl_create.c
index 0d20c2d..eb869ea 100644
--- a/tools/libxl/libxl_create.c
+++ b/tools/libxl/libxl_create.c
@@ -1563,7 +1563,7 @@ static void domain_create_cb(libxl__egc *egc,
                              int rc, uint32_t domid);
 
 static int do_domain_create(libxl_ctx *ctx, libxl_domain_config *d_config,
-                            uint32_t *domid, int restore_fd,
+                            uint32_t *domid, int restore_fd, int send_fd,
                             const libxl_domain_restore_params *params,
                             const libxl_asyncop_how *ao_how,
                             const libxl_asyncprogress_how *aop_console_how)
@@ -1578,6 +1578,7 @@ static int do_domain_create(libxl_ctx *ctx, libxl_domain_config *d_config,
     libxl_domain_config_init(&cdcs->dcs.guest_config_saved);
     libxl_domain_config_copy(ctx, &cdcs->dcs.guest_config_saved, d_config);
     cdcs->dcs.restore_fd = cdcs->dcs.libxc_fd = restore_fd;
+    cdcs->dcs.send_fd = send_fd;
     if (restore_fd > -1) {
         cdcs->dcs.restore_params = *params;
         rc = libxl__fd_flags_modify_save(gc, cdcs->dcs.restore_fd,
@@ -1756,17 +1757,17 @@ int libxl_domain_create_new(libxl_ctx *ctx, libxl_domain_config *d_config,
                             const libxl_asyncop_how *ao_how,
                             const libxl_asyncprogress_how *aop_console_how)
 {
-    return do_domain_create(ctx, d_config, domid, -1, NULL,
+    return do_domain_create(ctx, d_config, domid, -1, -1, NULL,
                             ao_how, aop_console_how);
 }
 
 int libxl_domain_create_restore(libxl_ctx *ctx, libxl_domain_config *d_config,
-                                uint32_t *domid, int restore_fd,
+                                uint32_t *domid, int restore_fd, int send_fd,
                                 const libxl_domain_restore_params *params,
                                 const libxl_asyncop_how *ao_how,
                                 const libxl_asyncprogress_how *aop_console_how)
 {
-    return do_domain_create(ctx, d_config, domid, restore_fd, params,
+    return do_domain_create(ctx, d_config, domid, restore_fd, send_fd, params,
                             ao_how, aop_console_how);
 }
 
diff --git a/tools/libxl/libxl_internal.h b/tools/libxl/libxl_internal.h
index adc426a..8e9e57d 100644
--- a/tools/libxl/libxl_internal.h
+++ b/tools/libxl/libxl_internal.h
@@ -3119,6 +3119,7 @@ struct libxl__domain_save_state {
     uint32_t domid;
     int fd;
     int fdfl; /* original flags on fd */
+    int recv_fd;
     libxl_domain_type type;
     int live;
     int debug;
@@ -3453,6 +3454,7 @@ struct libxl__domain_create_state {
     libxl_domain_config guest_config_saved; /* vanilla config */
     int restore_fd, libxc_fd;
     int restore_fdfl; /* original flags of restore_fd */
+    int send_fd;
     libxl_domain_restore_params restore_params;
     uint32_t domid_soft_reset;
     libxl__domain_create_cb *callback;
diff --git a/tools/libxl/xl_cmdimpl.c b/tools/libxl/xl_cmdimpl.c
index 04cbcf3..59182b7 100644
--- a/tools/libxl/xl_cmdimpl.c
+++ b/tools/libxl/xl_cmdimpl.c
@@ -159,6 +159,7 @@ struct domain_create {
     char *extra_config; /* extra config string */
     const char *restore_file;
     int migrate_fd; /* -1 means none */
+    int send_fd; /* -1 means none */
     char **migration_domname_r; /* from malloc */
 };
 
@@ -2686,6 +2687,7 @@ static uint32_t create_domain(struct domain_create *dom_info)
     int config_len = 0;
     int restore_fd = -1;
     int restore_fd_to_close = -1;
+    int send_fd = -1;
     const libxl_asyncprogress_how *autoconnect_console_how;
     struct save_file_header hdr;
     uint32_t domid_soft_reset = INVALID_DOMID;
@@ -2703,6 +2705,7 @@ static uint32_t create_domain(struct domain_create *dom_info)
         if (migrate_fd >= 0) {
             restore_source = "<incoming migration stream>";
             restore_fd = migrate_fd;
+            send_fd = dom_info->send_fd;
         } else {
             restore_source = restore_file;
             restore_fd = open(restore_file, O_RDONLY);
@@ -2893,7 +2896,7 @@ start:
 
         ret = libxl_domain_create_restore(ctx, &d_config,
                                           &domid, restore_fd,
-                                          &params,
+                                          send_fd, &params,
                                           0, autoconnect_console_how);
 
         libxl_domain_restore_params_dispose(&params);
@@ -4449,6 +4452,7 @@ static void migrate_receive(int debug, int daemonize, int monitor,
     dom_info.monitor = monitor;
     dom_info.paused = 1;
     dom_info.migrate_fd = recv_fd;
+    dom_info.send_fd = send_fd;
     dom_info.migration_domname_r = &migration_domname;
     dom_info.checkpointed_stream = checkpointed;
 
@@ -4622,6 +4626,7 @@ int main_restore(int argc, char **argv)
     dom_info.config_file = config_file;
     dom_info.restore_file = checkpoint_file;
     dom_info.migrate_fd = -1;
+    dom_info.send_fd = -1;
     dom_info.vnc = vnc;
     dom_info.vncautopass = vncautopass;
     dom_info.console_autoconnect = console_autoconnect;
@@ -5089,6 +5094,7 @@ int main_create(int argc, char **argv)
     dom_info.quiet = quiet;
     dom_info.config_file = filename;
     dom_info.migrate_fd = -1;
+    dom_info.send_fd = -1;
     dom_info.vnc = vnc;
     dom_info.vncautopass = vncautopass;
     dom_info.console_autoconnect = console_autoconnect;
diff --git a/tools/ocaml/libs/xl/xenlight_stubs.c b/tools/ocaml/libs/xl/xenlight_stubs.c
index 4133527..1c52c2a 100644
--- a/tools/ocaml/libs/xl/xenlight_stubs.c
+++ b/tools/ocaml/libs/xl/xenlight_stubs.c
@@ -537,7 +537,7 @@ value stub_libxl_domain_create_restore(value ctx, value domain_config, value par
 	restore_fd = Int_val(Field(params, 0));
 
 	caml_enter_blocking_section();
-	ret = libxl_domain_create_restore(CTX, &c_dconfig, &c_domid, restore_fd,
+	ret = libxl_domain_create_restore(CTX, &c_dconfig, &c_domid, restore_fd, -1,
 		&c_params, ao_how, NULL);
 	caml_leave_blocking_section();
 
-- 
2.5.0

  parent reply	other threads:[~2016-01-29  5:27 UTC|newest]

Thread overview: 56+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-01-29  5:27 [PATCH v7 00/18] Prerequisite patches for COLO Wen Congyang
2016-01-29  5:27 ` [PATCH v7 01/18] libxl/remus: init checkpoint_callback in Remus setup callback Wen Congyang
2016-02-03 19:39   ` Wei Liu
2016-02-04  5:17     ` Wen Congyang
2016-01-29  5:27 ` [PATCH v7 02/18] tools/libxl: move remus code into libxl_remus.c Wen Congyang
2016-01-29 16:29   ` Konrad Rzeszutek Wilk
2016-02-03 19:39   ` Wei Liu
2016-01-29  5:27 ` [PATCH v7 03/18] tools/libxl: move save/restore code into libxl_dom_save.c Wen Congyang
2016-01-29 16:30   ` Konrad Rzeszutek Wilk
2016-02-03 19:39   ` Wei Liu
2016-01-29  5:27 ` [PATCH v7 04/18] libxl/save: Refactor libxl__domain_suspend_state Wen Congyang
2016-01-29 16:31   ` Konrad Rzeszutek Wilk
2016-02-03 19:39   ` Wei Liu
2016-01-29  5:27 ` [PATCH v7 05/18] tools/libxc: support to resume uncooperative HVM guests Wen Congyang
2016-01-29 16:30   ` Konrad Rzeszutek Wilk
2016-02-03 19:40   ` Wei Liu
2016-02-04  5:30     ` Wen Congyang
2016-01-29  5:27 ` [PATCH v7 06/18] tools/libxl: introduce enum type libxl_checkpointed_stream Wen Congyang
2016-01-29 16:34   ` Konrad Rzeszutek Wilk
2016-02-03 19:40   ` Wei Liu
2016-01-29  5:27 ` [PATCH v7 07/18] migration/save: pass checkpointed_stream from libxl to libxc Wen Congyang
2016-01-29 16:35   ` Konrad Rzeszutek Wilk
2016-02-03 19:40   ` Wei Liu
2016-02-04  5:18     ` Wen Congyang
2016-01-29  5:27 ` [PATCH v7 08/18] tools/libxl: introduce libxl__domain_restore_device_model to load qemu state Wen Congyang
2016-01-29 16:34   ` Konrad Rzeszutek Wilk
2016-02-03 19:40   ` Wei Liu
2016-02-04  5:24     ` Wen Congyang
2016-02-04  9:41       ` Wei Liu
2016-02-04  9:46         ` Wei Liu
2016-01-29  5:27 ` [PATCH v7 09/18] tools/libxl: introduce libxl__domain_common_switch_qemu_logdirty() Wen Congyang
2016-01-29 16:34   ` Konrad Rzeszutek Wilk
2016-02-03 19:40   ` Wei Liu
2016-01-29  5:27 ` [PATCH v7 10/18] tools/libxl: export logdirty_init Wen Congyang
2016-02-03 19:40   ` Wei Liu
2016-01-29  5:27 ` Wen Congyang [this message]
2016-02-03 19:40   ` [PATCH v7 11/18] tools/libxl: Add back channel to allow migration target send data back Wei Liu
2016-01-29  5:27 ` [PATCH v7 12/18] tools/libx{l, c}: add back channel to libxc Wen Congyang
2016-01-29 16:38   ` Konrad Rzeszutek Wilk
2016-02-01  5:39     ` Wen Congyang
2016-02-03 19:40   ` Wei Liu
2016-02-04  5:28     ` Wen Congyang
2016-02-04  9:25       ` Wei Liu
2016-01-29  5:27 ` [PATCH v7 13/18] tools/libxl: rename remus device to checkpoint device Wen Congyang
2016-02-03 19:40   ` Wei Liu
2016-01-29  5:27 ` [PATCH v7 14/18] tools/libxl: fix backword compatibility after the automatic renaming Wen Congyang
2016-01-29 16:32   ` Konrad Rzeszutek Wilk
2016-01-29  5:27 ` [PATCH v7 15/18] tools/libxl: adjust the indentation Wen Congyang
2016-02-03 19:40   ` Wei Liu
2016-01-29  5:27 ` [PATCH v7 16/18] tools/libxl: store remus_ops in checkpoint device state Wen Congyang
2016-02-03 19:40   ` Wei Liu
2016-01-29  5:27 ` [PATCH v7 17/18] tools/libxl: move remus state into a seperate structure Wen Congyang
2016-02-03 19:41   ` Wei Liu
2016-01-29  5:27 ` [PATCH v7 18/18] tools/libxl: seperate device init/cleanup from checkpoint device layer Wen Congyang
2016-02-03 19:41   ` Wei Liu
2016-01-29 16:43 ` [PATCH v7 00/18] Prerequisite patches for COLO Konrad Rzeszutek Wilk

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1454045254-3711-12-git-send-email-wency@cn.fujitsu.com \
    --to=wency@cn.fujitsu.com \
    --cc=andrew.cooper3@citrix.com \
    --cc=eddie.dong@intel.com \
    --cc=guijianfeng@cn.fujitsu.com \
    --cc=hongyang.yang@easystack.cn \
    --cc=ian.campbell@citrix.com \
    --cc=ian.jackson@eu.citrix.com \
    --cc=konrad.wilk@oracle.com \
    --cc=lars.kurth@citrix.com \
    --cc=rshriram@cs.ubc.ca \
    --cc=wei.liu2@citrix.com \
    --cc=xen-devel@lists.xen.org \
    --cc=xiecl.fnst@cn.fujitsu.com \
    --cc=yunhong.jiang@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.