From mboxrd@z Thu Jan 1 00:00:00 1970 From: Geert Uytterhoeven Subject: [PATCH v4 2/9] ARM: dts: bockw: Enable SCIF_CLK frequency and pins Date: Fri, 29 Jan 2016 11:17:19 +0100 Message-ID: <1454062646-4826-3-git-send-email-geert+renesas@glider.be> References: <1454062646-4826-1-git-send-email-geert+renesas@glider.be> Return-path: In-Reply-To: <1454062646-4826-1-git-send-email-geert+renesas@glider.be> Sender: linux-renesas-soc-owner@vger.kernel.org To: Simon Horman , Magnus Damm Cc: linux-renesas-soc@vger.kernel.org, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, Geert Uytterhoeven List-Id: devicetree@vger.kernel.org Add and enable the external crystal for the SCIF_CLK and its pinctrl, to be used by the Baud Rate Generator for External Clock (BRG) on (H)SCIF. This increases the range and accuracy of supported baud rates. Signed-off-by: Geert Uytterhoeven --- Based on schematics, tested with remote access. v4: - Change one-line summary prefix to match current arm-soc practices, - Move scif_clk next to scif0, for consistency with other boards, v3: - New. --- arch/arm/boot/dts/r8a7778-bockw.dts | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/arch/arm/boot/dts/r8a7778-bockw.dts b/arch/arm/boot/dts/r8a7778-bockw.dts index a52b359e2ae24a30..21e3b9dda2dabf5e 100644 --- a/arch/arm/boot/dts/r8a7778-bockw.dts +++ b/arch/arm/boot/dts/r8a7778-bockw.dts @@ -126,11 +126,19 @@ }; &pfc { + pinctrl-0 = <&scif_clk_pins>; + pinctrl-names = "default"; + scif0_pins: serial0 { renesas,groups = "scif0_data_a", "scif0_ctrl"; renesas,function = "scif0"; }; + scif_clk_pins: scif_clk { + renesas,groups = "scif_clk"; + renesas,function = "scif_clk"; + }; + mmc_pins: mmc { renesas,groups = "mmc_data8", "mmc_ctrl"; renesas,function = "mmc"; @@ -217,3 +225,8 @@ status = "okay"; }; + +&scif_clk { + clock-frequency = <14745600>; + status = "okay"; +}; -- 1.9.1 From mboxrd@z Thu Jan 1 00:00:00 1970 From: geert+renesas@glider.be (Geert Uytterhoeven) Date: Fri, 29 Jan 2016 11:17:19 +0100 Subject: [PATCH v4 2/9] ARM: dts: bockw: Enable SCIF_CLK frequency and pins In-Reply-To: <1454062646-4826-1-git-send-email-geert+renesas@glider.be> References: <1454062646-4826-1-git-send-email-geert+renesas@glider.be> Message-ID: <1454062646-4826-3-git-send-email-geert+renesas@glider.be> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Add and enable the external crystal for the SCIF_CLK and its pinctrl, to be used by the Baud Rate Generator for External Clock (BRG) on (H)SCIF. This increases the range and accuracy of supported baud rates. Signed-off-by: Geert Uytterhoeven --- Based on schematics, tested with remote access. v4: - Change one-line summary prefix to match current arm-soc practices, - Move scif_clk next to scif0, for consistency with other boards, v3: - New. --- arch/arm/boot/dts/r8a7778-bockw.dts | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/arch/arm/boot/dts/r8a7778-bockw.dts b/arch/arm/boot/dts/r8a7778-bockw.dts index a52b359e2ae24a30..21e3b9dda2dabf5e 100644 --- a/arch/arm/boot/dts/r8a7778-bockw.dts +++ b/arch/arm/boot/dts/r8a7778-bockw.dts @@ -126,11 +126,19 @@ }; &pfc { + pinctrl-0 = <&scif_clk_pins>; + pinctrl-names = "default"; + scif0_pins: serial0 { renesas,groups = "scif0_data_a", "scif0_ctrl"; renesas,function = "scif0"; }; + scif_clk_pins: scif_clk { + renesas,groups = "scif_clk"; + renesas,function = "scif_clk"; + }; + mmc_pins: mmc { renesas,groups = "mmc_data8", "mmc_ctrl"; renesas,function = "mmc"; @@ -217,3 +225,8 @@ status = "okay"; }; + +&scif_clk { + clock-frequency = <14745600>; + status = "okay"; +}; -- 1.9.1