All of lore.kernel.org
 help / color / mirror / Atom feed
From: Maxime Coquelin <mcoquelin.stm32@gmail.com>
To: patrice.chotard@st.com, Linus Walleij <linus.walleij@linaro.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Rob Herring <robh+dt@kernel.org>,
	linux-gpio@vger.kernel.org, arnd@arndb.de
Cc: linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, afaerber@suse.de,
	devicetree@vger.kernel.org,
	Daniel Thompson <daniel.thompson@linaro.org>,
	bruherrera@gmail.com
Subject: [PATCH v5 0/9] Add STM32 pinctrl/GPIO driver
Date: Wed,  3 Feb 2016 12:04:36 +0100	[thread overview]
Message-ID: <1454497485-464-1-git-send-email-mcoquelin.stm32@gmail.com> (raw)

Hi Linus,

This is the fifth round of STM32 pinctrl series, which is rebased on top of
v4.5-rc1 and removes no more needed dependency between DT and driver.

Also, it fixes the Makefile so that it is really built when COMPILE_TEST is
set and not ARCH_STM32.

The STM32 family has 16 pins per GPIO bank, and the number of bank varies
depending on the model.

Pins can be multiplexed either in GPIO mode, alternate function (up to 15
functions per pin) or analog (for ADC/DAC).

Changes since v4:
-----------------
 - Rebase on v4.5-rc1
 - Fix compilation breakage due to gpio_chip struct .dev field renaming
 - Move the macros from includes/dt-bindings to STM32 pinctrl driver directory
to avoid uneeded dependency between DT and driver.
 - Fix Makefile so that driver is built with COMPILE_TEST set

Changes since v3:
-----------------
 - Rebase on v4.4
 - Fix error paths in stm32_pctrl_dt_subnode_to_map() (Patrice)
 - Remove useless stm32_pctrl_find_function_by_pin function (Patrice)

Changes since v2:
-----------------
 - Rebase on v4.4-rc1
 - Declare leds also for Eval board
 - Set green led as heartbeat
 - Collect some acks

Changes since v1:
-----------------
 - Add GPIO LEDs support in DT and defconfig
 - Changes pinmux DT bindings from macros to raw values (Daniel)
 - Improve DT bindings documentation (Daniel)
 - Fix some commit fixup and rebase issues.

Kind regards,
Maxime

Maxime Coquelin (9):
  ARM: Kconfig: Introduce MACH_STM32F429 flag
  Documentation: dt-bindings: Document STM32 pinctrl driver DT bindings
  includes: dt-bindings: Add STM32F429 pinctrl DT bindings
  pinctrl: Add STM32 MCUs support
  ARM: mach-stm32: Select pinctrl
  ARM: dts: Add pinctrl node to STM32F429
  ARM: dts: Add USART1 pin config to STM32F429 boards
  ARM: dts: Add leds support to STM32F429 boards
  ARM: config: Enable GPIO Led driver in stm32_defconfig

 .../bindings/pinctrl/st,stm32-pinctrl.txt          |  126 ++
 arch/arm/Kconfig                                   |    6 +
 arch/arm/boot/dts/stm32429i-eval.dts               |   19 +
 arch/arm/boot/dts/stm32f429-disco.dts              |   13 +
 arch/arm/boot/dts/stm32f429.dtsi                   |  110 ++
 arch/arm/configs/stm32_defconfig                   |    1 +
 drivers/pinctrl/Kconfig                            |    1 +
 drivers/pinctrl/Makefile                           |    1 +
 drivers/pinctrl/stm32/Kconfig                      |   16 +
 drivers/pinctrl/stm32/Makefile                     |    5 +
 drivers/pinctrl/stm32/pinctrl-stm32.c              |  832 ++++++++++
 drivers/pinctrl/stm32/pinctrl-stm32.h              |   51 +
 drivers/pinctrl/stm32/pinctrl-stm32f429.c          | 1598 ++++++++++++++++++++
 include/dt-bindings/pinctrl/stm32f429-pinfunc.h    | 1239 +++++++++++++++
 14 files changed, 4018 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt
 create mode 100644 drivers/pinctrl/stm32/Kconfig
 create mode 100644 drivers/pinctrl/stm32/Makefile
 create mode 100644 drivers/pinctrl/stm32/pinctrl-stm32.c
 create mode 100644 drivers/pinctrl/stm32/pinctrl-stm32.h
 create mode 100644 drivers/pinctrl/stm32/pinctrl-stm32f429.c
 create mode 100644 include/dt-bindings/pinctrl/stm32f429-pinfunc.h

-- 
1.9.1


WARNING: multiple messages have this Message-ID
From: mcoquelin.stm32@gmail.com (Maxime Coquelin)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 0/9] Add STM32 pinctrl/GPIO driver
Date: Wed,  3 Feb 2016 12:04:36 +0100	[thread overview]
Message-ID: <1454497485-464-1-git-send-email-mcoquelin.stm32@gmail.com> (raw)

Hi Linus,

This is the fifth round of STM32 pinctrl series, which is rebased on top of
v4.5-rc1 and removes no more needed dependency between DT and driver.

Also, it fixes the Makefile so that it is really built when COMPILE_TEST is
set and not ARCH_STM32.

The STM32 family has 16 pins per GPIO bank, and the number of bank varies
depending on the model.

Pins can be multiplexed either in GPIO mode, alternate function (up to 15
functions per pin) or analog (for ADC/DAC).

Changes since v4:
-----------------
 - Rebase on v4.5-rc1
 - Fix compilation breakage due to gpio_chip struct .dev field renaming
 - Move the macros from includes/dt-bindings to STM32 pinctrl driver directory
to avoid uneeded dependency between DT and driver.
 - Fix Makefile so that driver is built with COMPILE_TEST set

Changes since v3:
-----------------
 - Rebase on v4.4
 - Fix error paths in stm32_pctrl_dt_subnode_to_map() (Patrice)
 - Remove useless stm32_pctrl_find_function_by_pin function (Patrice)

Changes since v2:
-----------------
 - Rebase on v4.4-rc1
 - Declare leds also for Eval board
 - Set green led as heartbeat
 - Collect some acks

Changes since v1:
-----------------
 - Add GPIO LEDs support in DT and defconfig
 - Changes pinmux DT bindings from macros to raw values (Daniel)
 - Improve DT bindings documentation (Daniel)
 - Fix some commit fixup and rebase issues.

Kind regards,
Maxime

Maxime Coquelin (9):
  ARM: Kconfig: Introduce MACH_STM32F429 flag
  Documentation: dt-bindings: Document STM32 pinctrl driver DT bindings
  includes: dt-bindings: Add STM32F429 pinctrl DT bindings
  pinctrl: Add STM32 MCUs support
  ARM: mach-stm32: Select pinctrl
  ARM: dts: Add pinctrl node to STM32F429
  ARM: dts: Add USART1 pin config to STM32F429 boards
  ARM: dts: Add leds support to STM32F429 boards
  ARM: config: Enable GPIO Led driver in stm32_defconfig

 .../bindings/pinctrl/st,stm32-pinctrl.txt          |  126 ++
 arch/arm/Kconfig                                   |    6 +
 arch/arm/boot/dts/stm32429i-eval.dts               |   19 +
 arch/arm/boot/dts/stm32f429-disco.dts              |   13 +
 arch/arm/boot/dts/stm32f429.dtsi                   |  110 ++
 arch/arm/configs/stm32_defconfig                   |    1 +
 drivers/pinctrl/Kconfig                            |    1 +
 drivers/pinctrl/Makefile                           |    1 +
 drivers/pinctrl/stm32/Kconfig                      |   16 +
 drivers/pinctrl/stm32/Makefile                     |    5 +
 drivers/pinctrl/stm32/pinctrl-stm32.c              |  832 ++++++++++
 drivers/pinctrl/stm32/pinctrl-stm32.h              |   51 +
 drivers/pinctrl/stm32/pinctrl-stm32f429.c          | 1598 ++++++++++++++++++++
 include/dt-bindings/pinctrl/stm32f429-pinfunc.h    | 1239 +++++++++++++++
 14 files changed, 4018 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt
 create mode 100644 drivers/pinctrl/stm32/Kconfig
 create mode 100644 drivers/pinctrl/stm32/Makefile
 create mode 100644 drivers/pinctrl/stm32/pinctrl-stm32.c
 create mode 100644 drivers/pinctrl/stm32/pinctrl-stm32.h
 create mode 100644 drivers/pinctrl/stm32/pinctrl-stm32f429.c
 create mode 100644 include/dt-bindings/pinctrl/stm32f429-pinfunc.h

-- 
1.9.1

             reply	other threads:[~2016-02-03 11:04 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-02-03 11:04 Maxime Coquelin [this message]
2016-02-03 11:04 ` Maxime Coquelin
2016-02-03 11:04 ` [PATCH v5 1/9] ARM: Kconfig: Introduce MACH_STM32F429 flag Maxime Coquelin
2016-02-03 11:04   ` Maxime Coquelin
2016-02-03 11:04   ` Maxime Coquelin
2016-02-03 11:04 ` [PATCH v5 2/9] Documentation: dt-bindings: Document STM32 pinctrl driver DT bindings Maxime Coquelin
2016-02-03 11:04   ` Maxime Coquelin
2016-02-03 11:04 ` [PATCH v5 3/9] includes: dt-bindings: Add STM32F429 pinctrl " Maxime Coquelin
2016-02-03 11:04   ` Maxime Coquelin
2016-02-03 11:04   ` Maxime Coquelin
2016-02-03 11:04 ` [PATCH v5 4/9] pinctrl: Add STM32 MCUs support Maxime Coquelin
2016-02-03 11:04   ` Maxime Coquelin
2016-02-03 11:04 ` [PATCH v5 5/9] ARM: mach-stm32: Select pinctrl Maxime Coquelin
2016-02-03 11:04   ` Maxime Coquelin
     [not found] ` <1454497485-464-1-git-send-email-mcoquelin.stm32-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2016-02-03 11:04   ` [PATCH v5 6/9] ARM: dts: Add pinctrl node to STM32F429 Maxime Coquelin
2016-02-03 11:04     ` Maxime Coquelin
2016-02-03 11:04     ` Maxime Coquelin
2016-02-03 11:04 ` [PATCH v5 7/9] ARM: dts: Add USART1 pin config to STM32F429 boards Maxime Coquelin
2016-02-03 11:04   ` Maxime Coquelin
2016-02-03 11:04 ` [PATCH v5 8/9] ARM: dts: Add leds support " Maxime Coquelin
2016-02-03 11:04   ` Maxime Coquelin
2016-02-03 11:04 ` [PATCH v5 9/9] ARM: config: Enable GPIO Led driver in stm32_defconfig Maxime Coquelin
2016-02-03 11:04   ` Maxime Coquelin
2016-02-08 17:50 ` [PATCH v5 0/9] Add STM32 pinctrl/GPIO driver Maxime Coquelin
2016-02-08 17:50   ` Maxime Coquelin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1454497485-464-1-git-send-email-mcoquelin.stm32@gmail.com \
    --to=mcoquelin.stm32@gmail.com \
    --cc=afaerber@suse.de \
    --cc=arnd@arndb.de \
    --cc=bruherrera@gmail.com \
    --cc=daniel.thompson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=patrice.chotard@st.com \
    --cc=robh+dt@kernel.org \
    --subject='Re: [PATCH v5 0/9] Add STM32 pinctrl/GPIO driver' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.