[PATCH V3 0/5] PCIe Xilinx generic driver for Microblaze and

[PATCH V3 0/5] PCIe Xilinx generic driver for Microblaze and

[Bharat Kumar Gogada]

This patch series does modifications to pcie-xilinx.c, to support common
driver on both Zynq and Microblaze architectures.
Microblaze pci-common.c has been modified to support generic driver.

Bharat Kumar Gogada (5):
  PCI: xilinx: Removing xilinx_pcie_parse_and_add_res function
  PCI: xilinx: Removing struct hw_pci structure.
  PCI: xilinx: Modifying AXI PCIe Host Bridge driver to     work on both
     Zynq and Microblaze
  PCI: xilinx: Updating Zynq PCI binding documentation     with 
    Microblaze node.
  Microblaze: Modifying microblaze PCI subsytem to     support  generic
    Xilinx  AXI PCIe Host Bridge IP driver

 .../devicetree/bindings/pci/xilinx-pcie.txt        |  32 +++-
 arch/microblaze/Kconfig                            |   3 +
 arch/microblaze/pci/pci-common.c                   |  56 ++----
 drivers/pci/host/Kconfig                           |   2 +-
 drivers/pci/host/pcie-xilinx.c                     | 191 +++------------------
 5 files changed, 66 insertions(+), 218 deletions(-)

-- 
2.1.1

[PATCH V3 0/5] PCIe Xilinx generic driver for Microblaze and

[Bharat Kumar Gogada]

This patch series does modifications to pcie-xilinx.c, to support common
driver on both Zynq and Microblaze architectures.
Microblaze pci-common.c has been modified to support generic driver.

Bharat Kumar Gogada (5):
  PCI: xilinx: Removing xilinx_pcie_parse_and_add_res function
  PCI: xilinx: Removing struct hw_pci structure.
  PCI: xilinx: Modifying AXI PCIe Host Bridge driver to     work on both
     Zynq and Microblaze
  PCI: xilinx: Updating Zynq PCI binding documentation     with 
    Microblaze node.
  Microblaze: Modifying microblaze PCI subsytem to     support  generic
    Xilinx  AXI PCIe Host Bridge IP driver

 .../devicetree/bindings/pci/xilinx-pcie.txt        |  32 +++-
 arch/microblaze/Kconfig                            |   3 +
 arch/microblaze/pci/pci-common.c                   |  56 ++----
 drivers/pci/host/Kconfig                           |   2 +-
 drivers/pci/host/pcie-xilinx.c                     | 191 +++------------------
 5 files changed, 66 insertions(+), 218 deletions(-)

-- 
2.1.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH V3 0/5] PCIe Xilinx generic driver for Microblaze and

[Bharat Kumar Gogada]

This patch series does modifications to pcie-xilinx.c, to support common
driver on both Zynq and Microblaze architectures.
Microblaze pci-common.c has been modified to support generic driver.

Bharat Kumar Gogada (5):
  PCI: xilinx: Removing xilinx_pcie_parse_and_add_res function
  PCI: xilinx: Removing struct hw_pci structure.
  PCI: xilinx: Modifying AXI PCIe Host Bridge driver to     work on both
     Zynq and Microblaze
  PCI: xilinx: Updating Zynq PCI binding documentation     with 
    Microblaze node.
  Microblaze: Modifying microblaze PCI subsytem to     support  generic
    Xilinx  AXI PCIe Host Bridge IP driver

 .../devicetree/bindings/pci/xilinx-pcie.txt        |  32 +++-
 arch/microblaze/Kconfig                            |   3 +
 arch/microblaze/pci/pci-common.c                   |  56 ++----
 drivers/pci/host/Kconfig                           |   2 +-
 drivers/pci/host/pcie-xilinx.c                     | 191 +++------------------
 5 files changed, 66 insertions(+), 218 deletions(-)

-- 
2.1.1

[PATCH V3 1/5] PCI: xilinx: Removing xilinx_pcie_parse_and_add_res function

[Bharat Kumar Gogada]

Removing xilinx_pcie_parse_and_add_res function replacing with
of_pci_get_host_bridge_resources API.

Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com>
Signed-off-by: Ravi Kiran Gummaluri <rgummal@xilinx.com>
---
Changes:
Removing xilinx_pcie_parse_and_add_res function and replacing it
with of_pci_get_host_bridge_resources kernel API which does the same.
---
 drivers/pci/host/pcie-xilinx.c | 107 ++---------------------------------------
 1 file changed, 5 insertions(+), 102 deletions(-)

diff --git a/drivers/pci/host/pcie-xilinx.c b/drivers/pci/host/pcie-xilinx.c
index 3c7a0d5..627878d 100644
--- a/drivers/pci/host/pcie-xilinx.c
+++ b/drivers/pci/host/pcie-xilinx.c
@@ -94,9 +94,6 @@
 /* Number of MSI IRQs */
 #define XILINX_NUM_MSI_IRQS		128
 
-/* Number of Memory Resources */
-#define XILINX_MAX_NUM_RESOURCES	3
-
 /**
  * struct xilinx_pcie_port - PCIe port information
  * @reg_base: IO Mapped Register Base
@@ -105,7 +102,6 @@
  * @root_busno: Root Bus number
  * @dev: Device pointer
  * @irq_domain: IRQ domain pointer
- * @bus_range: Bus range
  * @resources: Bus Resources
  */
 struct xilinx_pcie_port {
@@ -659,97 +655,6 @@ static struct pci_bus *xilinx_pcie_scan_bus(int nr, struct pci_sys_data *sys)
 }
 
 /**
- * xilinx_pcie_parse_and_add_res - Add resources by parsing ranges
- * @port: PCIe port information
- *
- * Return: '0' on success and error value on failure
- */
-static int xilinx_pcie_parse_and_add_res(struct xilinx_pcie_port *port)
-{
-	struct device *dev = port->dev;
-	struct device_node *node = dev->of_node;
-	struct resource *mem;
-	resource_size_t offset;
-	struct of_pci_range_parser parser;
-	struct of_pci_range range;
-	struct resource_entry *win;
-	int err = 0, mem_resno = 0;
-
-	/* Get the ranges */
-	if (of_pci_range_parser_init(&parser, node)) {
-		dev_err(dev, "missing \"ranges\" property\n");
-		return -EINVAL;
-	}
-
-	/* Parse the ranges and add the resources found to the list */
-	for_each_of_pci_range(&parser, &range) {
-
-		if (mem_resno >= XILINX_MAX_NUM_RESOURCES) {
-			dev_err(dev, "Maximum memory resources exceeded\n");
-			return -EINVAL;
-		}
-
-		mem = devm_kmalloc(dev, sizeof(*mem), GFP_KERNEL);
-		if (!mem) {
-			err = -ENOMEM;
-			goto free_resources;
-		}
-
-		of_pci_range_to_resource(&range, node, mem);
-
-		switch (mem->flags & IORESOURCE_TYPE_BITS) {
-		case IORESOURCE_MEM:
-			offset = range.cpu_addr - range.pci_addr;
-			mem_resno++;
-			break;
-		default:
-			err = -EINVAL;
-			break;
-		}
-
-		if (err < 0) {
-			dev_warn(dev, "Invalid resource found %pR\n", mem);
-			continue;
-		}
-
-		err = request_resource(&iomem_resource, mem);
-		if (err)
-			goto free_resources;
-
-		pci_add_resource_offset(&port->resources, mem, offset);
-	}
-
-	/* Get the bus range */
-	if (of_pci_parse_bus_range(node, &port->bus_range)) {
-		u32 val = pcie_read(port, XILINX_PCIE_REG_BIR);
-		u8 last;
-
-		last = (val & XILINX_PCIE_BIR_ECAM_SZ_MASK) >>
-			XILINX_PCIE_BIR_ECAM_SZ_SHIFT;
-
-		port->bus_range = (struct resource) {
-			.name	= node->name,
-			.start	= 0,
-			.end	= last,
-			.flags	= IORESOURCE_BUS,
-		};
-	}
-
-	/* Register bus resource */
-	pci_add_resource(&port->resources, &port->bus_range);
-
-	return 0;
-
-free_resources:
-	release_child_resources(&iomem_resource);
-	resource_list_for_each_entry(win, &port->resources)
-		devm_kfree(dev, win->res);
-	pci_free_resource_list(&port->resources);
-
-	return err;
-}
-
-/**
  * xilinx_pcie_parse_dt - Parse Device tree
  * @port: PCIe port information
  *
@@ -802,6 +707,8 @@ static int xilinx_pcie_probe(struct platform_device *pdev)
 	struct hw_pci hw;
 	struct device *dev = &pdev->dev;
 	int err;
+	resource_size_t iobase = 0;
+	LIST_HEAD(res);
 
 	if (!dev->of_node)
 		return -ENODEV;
@@ -826,14 +733,10 @@ static int xilinx_pcie_probe(struct platform_device *pdev)
 		return err;
 	}
 
-	/*
-	 * Parse PCI ranges, configuration bus range and
-	 * request their resources
-	 */
-	INIT_LIST_HEAD(&port->resources);
-	err = xilinx_pcie_parse_and_add_res(port);
+	err = of_pci_get_host_bridge_resources(dev->of_node, 0, 0xff, &res,
+					       &iobase);
 	if (err) {
-		dev_err(dev, "Failed adding resources\n");
+		dev_err(dev, "Getting bridge resources failed\n");
 		return err;
 	}
 
-- 
2.1.1

[PATCH V3 1/5] PCI: xilinx: Removing xilinx_pcie_parse_and_add_res function

[Bharat Kumar Gogada]

Removing xilinx_pcie_parse_and_add_res function replacing with
of_pci_get_host_bridge_resources API.

Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com>
Signed-off-by: Ravi Kiran Gummaluri <rgummal@xilinx.com>
---
Changes:
Removing xilinx_pcie_parse_and_add_res function and replacing it
with of_pci_get_host_bridge_resources kernel API which does the same.
---
 drivers/pci/host/pcie-xilinx.c | 107 ++---------------------------------------
 1 file changed, 5 insertions(+), 102 deletions(-)

diff --git a/drivers/pci/host/pcie-xilinx.c b/drivers/pci/host/pcie-xilinx.c
index 3c7a0d5..627878d 100644
--- a/drivers/pci/host/pcie-xilinx.c
+++ b/drivers/pci/host/pcie-xilinx.c
@@ -94,9 +94,6 @@
 /* Number of MSI IRQs */
 #define XILINX_NUM_MSI_IRQS		128
 
-/* Number of Memory Resources */
-#define XILINX_MAX_NUM_RESOURCES	3
-
 /**
  * struct xilinx_pcie_port - PCIe port information
  * @reg_base: IO Mapped Register Base
@@ -105,7 +102,6 @@
  * @root_busno: Root Bus number
  * @dev: Device pointer
  * @irq_domain: IRQ domain pointer
- * @bus_range: Bus range
  * @resources: Bus Resources
  */
 struct xilinx_pcie_port {
@@ -659,97 +655,6 @@ static struct pci_bus *xilinx_pcie_scan_bus(int nr, struct pci_sys_data *sys)
 }
 
 /**
- * xilinx_pcie_parse_and_add_res - Add resources by parsing ranges
- * @port: PCIe port information
- *
- * Return: '0' on success and error value on failure
- */
-static int xilinx_pcie_parse_and_add_res(struct xilinx_pcie_port *port)
-{
-	struct device *dev = port->dev;
-	struct device_node *node = dev->of_node;
-	struct resource *mem;
-	resource_size_t offset;
-	struct of_pci_range_parser parser;
-	struct of_pci_range range;
-	struct resource_entry *win;
-	int err = 0, mem_resno = 0;
-
-	/* Get the ranges */
-	if (of_pci_range_parser_init(&parser, node)) {
-		dev_err(dev, "missing \"ranges\" property\n");
-		return -EINVAL;
-	}
-
-	/* Parse the ranges and add the resources found to the list */
-	for_each_of_pci_range(&parser, &range) {
-
-		if (mem_resno >= XILINX_MAX_NUM_RESOURCES) {
-			dev_err(dev, "Maximum memory resources exceeded\n");
-			return -EINVAL;
-		}
-
-		mem = devm_kmalloc(dev, sizeof(*mem), GFP_KERNEL);
-		if (!mem) {
-			err = -ENOMEM;
-			goto free_resources;
-		}
-
-		of_pci_range_to_resource(&range, node, mem);
-
-		switch (mem->flags & IORESOURCE_TYPE_BITS) {
-		case IORESOURCE_MEM:
-			offset = range.cpu_addr - range.pci_addr;
-			mem_resno++;
-			break;
-		default:
-			err = -EINVAL;
-			break;
-		}
-
-		if (err < 0) {
-			dev_warn(dev, "Invalid resource found %pR\n", mem);
-			continue;
-		}
-
-		err = request_resource(&iomem_resource, mem);
-		if (err)
-			goto free_resources;
-
-		pci_add_resource_offset(&port->resources, mem, offset);
-	}
-
-	/* Get the bus range */
-	if (of_pci_parse_bus_range(node, &port->bus_range)) {
-		u32 val = pcie_read(port, XILINX_PCIE_REG_BIR);
-		u8 last;
-
-		last = (val & XILINX_PCIE_BIR_ECAM_SZ_MASK) >>
-			XILINX_PCIE_BIR_ECAM_SZ_SHIFT;
-
-		port->bus_range = (struct resource) {
-			.name	= node->name,
-			.start	= 0,
-			.end	= last,
-			.flags	= IORESOURCE_BUS,
-		};
-	}
-
-	/* Register bus resource */
-	pci_add_resource(&port->resources, &port->bus_range);
-
-	return 0;
-
-free_resources:
-	release_child_resources(&iomem_resource);
-	resource_list_for_each_entry(win, &port->resources)
-		devm_kfree(dev, win->res);
-	pci_free_resource_list(&port->resources);
-
-	return err;
-}
-
-/**
  * xilinx_pcie_parse_dt - Parse Device tree
  * @port: PCIe port information
  *
@@ -802,6 +707,8 @@ static int xilinx_pcie_probe(struct platform_device *pdev)
 	struct hw_pci hw;
 	struct device *dev = &pdev->dev;
 	int err;
+	resource_size_t iobase = 0;
+	LIST_HEAD(res);
 
 	if (!dev->of_node)
 		return -ENODEV;
@@ -826,14 +733,10 @@ static int xilinx_pcie_probe(struct platform_device *pdev)
 		return err;
 	}
 
-	/*
-	 * Parse PCI ranges, configuration bus range and
-	 * request their resources
-	 */
-	INIT_LIST_HEAD(&port->resources);
-	err = xilinx_pcie_parse_and_add_res(port);
+	err = of_pci_get_host_bridge_resources(dev->of_node, 0, 0xff, &res,
+					       &iobase);
 	if (err) {
-		dev_err(dev, "Failed adding resources\n");
+		dev_err(dev, "Getting bridge resources failed\n");
 		return err;
 	}
 
-- 
2.1.1

[PATCH V3 1/5] PCI: xilinx: Removing xilinx_pcie_parse_and_add_res function

[Bharat Kumar Gogada]

Removing xilinx_pcie_parse_and_add_res function replacing with
of_pci_get_host_bridge_resources API.

Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com>
Signed-off-by: Ravi Kiran Gummaluri <rgummal@xilinx.com>
---
Changes:
Removing xilinx_pcie_parse_and_add_res function and replacing it
with of_pci_get_host_bridge_resources kernel API which does the same.
---
 drivers/pci/host/pcie-xilinx.c | 107 ++---------------------------------------
 1 file changed, 5 insertions(+), 102 deletions(-)

diff --git a/drivers/pci/host/pcie-xilinx.c b/drivers/pci/host/pcie-xilinx.c
index 3c7a0d5..627878d 100644
--- a/drivers/pci/host/pcie-xilinx.c
+++ b/drivers/pci/host/pcie-xilinx.c
@@ -94,9 +94,6 @@
 /* Number of MSI IRQs */
 #define XILINX_NUM_MSI_IRQS		128
 
-/* Number of Memory Resources */
-#define XILINX_MAX_NUM_RESOURCES	3
-
 /**
  * struct xilinx_pcie_port - PCIe port information
  * @reg_base: IO Mapped Register Base
@@ -105,7 +102,6 @@
  * @root_busno: Root Bus number
  * @dev: Device pointer
  * @irq_domain: IRQ domain pointer
- * @bus_range: Bus range
  * @resources: Bus Resources
  */
 struct xilinx_pcie_port {
@@ -659,97 +655,6 @@ static struct pci_bus *xilinx_pcie_scan_bus(int nr, struct pci_sys_data *sys)
 }
 
 /**
- * xilinx_pcie_parse_and_add_res - Add resources by parsing ranges
- * @port: PCIe port information
- *
- * Return: '0' on success and error value on failure
- */
-static int xilinx_pcie_parse_and_add_res(struct xilinx_pcie_port *port)
-{
-	struct device *dev = port->dev;
-	struct device_node *node = dev->of_node;
-	struct resource *mem;
-	resource_size_t offset;
-	struct of_pci_range_parser parser;
-	struct of_pci_range range;
-	struct resource_entry *win;
-	int err = 0, mem_resno = 0;
-
-	/* Get the ranges */
-	if (of_pci_range_parser_init(&parser, node)) {
-		dev_err(dev, "missing \"ranges\" property\n");
-		return -EINVAL;
-	}
-
-	/* Parse the ranges and add the resources found to the list */
-	for_each_of_pci_range(&parser, &range) {
-
-		if (mem_resno >= XILINX_MAX_NUM_RESOURCES) {
-			dev_err(dev, "Maximum memory resources exceeded\n");
-			return -EINVAL;
-		}
-
-		mem = devm_kmalloc(dev, sizeof(*mem), GFP_KERNEL);
-		if (!mem) {
-			err = -ENOMEM;
-			goto free_resources;
-		}
-
-		of_pci_range_to_resource(&range, node, mem);
-
-		switch (mem->flags & IORESOURCE_TYPE_BITS) {
-		case IORESOURCE_MEM:
-			offset = range.cpu_addr - range.pci_addr;
-			mem_resno++;
-			break;
-		default:
-			err = -EINVAL;
-			break;
-		}
-
-		if (err < 0) {
-			dev_warn(dev, "Invalid resource found %pR\n", mem);
-			continue;
-		}
-
-		err = request_resource(&iomem_resource, mem);
-		if (err)
-			goto free_resources;
-
-		pci_add_resource_offset(&port->resources, mem, offset);
-	}
-
-	/* Get the bus range */
-	if (of_pci_parse_bus_range(node, &port->bus_range)) {
-		u32 val = pcie_read(port, XILINX_PCIE_REG_BIR);
-		u8 last;
-
-		last = (val & XILINX_PCIE_BIR_ECAM_SZ_MASK) >>
-			XILINX_PCIE_BIR_ECAM_SZ_SHIFT;
-
-		port->bus_range = (struct resource) {
-			.name	= node->name,
-			.start	= 0,
-			.end	= last,
-			.flags	= IORESOURCE_BUS,
-		};
-	}
-
-	/* Register bus resource */
-	pci_add_resource(&port->resources, &port->bus_range);
-
-	return 0;
-
-free_resources:
-	release_child_resources(&iomem_resource);
-	resource_list_for_each_entry(win, &port->resources)
-		devm_kfree(dev, win->res);
-	pci_free_resource_list(&port->resources);
-
-	return err;
-}
-
-/**
  * xilinx_pcie_parse_dt - Parse Device tree
  * @port: PCIe port information
  *
@@ -802,6 +707,8 @@ static int xilinx_pcie_probe(struct platform_device *pdev)
 	struct hw_pci hw;
 	struct device *dev = &pdev->dev;
 	int err;
+	resource_size_t iobase = 0;
+	LIST_HEAD(res);
 
 	if (!dev->of_node)
 		return -ENODEV;
@@ -826,14 +733,10 @@ static int xilinx_pcie_probe(struct platform_device *pdev)
 		return err;
 	}
 
-	/*
-	 * Parse PCI ranges, configuration bus range and
-	 * request their resources
-	 */
-	INIT_LIST_HEAD(&port->resources);
-	err = xilinx_pcie_parse_and_add_res(port);
+	err = of_pci_get_host_bridge_resources(dev->of_node, 0, 0xff, &res,
+					       &iobase);
 	if (err) {
-		dev_err(dev, "Failed adding resources\n");
+		dev_err(dev, "Getting bridge resources failed\n");
 		return err;
 	}
 
-- 
2.1.1

[PATCH V3 2/5] PCI: xilinx: Removing struct hw_pci structure.

[Bharat Kumar Gogada]

Removing struct hw_pci and adding generic PCI core API's.

Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com>
Signed-off-by: Ravi Kiran Gummaluri <rgummal@xilinx.com>
---
Changes:
Removing architecure dependecy structure struct hw_pci which is ARM 32-bit
specific structure, and adding generic PCI core API's to register to
PCI subsytem.
Removing funtions which are not being used with generic API's.
---
 drivers/pci/host/pcie-xilinx.c | 82 +++++++++---------------------------------
 1 file changed, 16 insertions(+), 66 deletions(-)

diff --git a/drivers/pci/host/pcie-xilinx.c b/drivers/pci/host/pcie-xilinx.c
index 627878d..13fec35 100644
--- a/drivers/pci/host/pcie-xilinx.c
+++ b/drivers/pci/host/pcie-xilinx.c
@@ -111,17 +111,11 @@ struct xilinx_pcie_port {
 	u8 root_busno;
 	struct device *dev;
 	struct irq_domain *irq_domain;
-	struct resource bus_range;
 	struct list_head resources;
 };
 
 static DECLARE_BITMAP(msi_irq_in_use, XILINX_NUM_MSI_IRQS);
 
-static inline struct xilinx_pcie_port *sys_to_pcie(struct pci_sys_data *sys)
-{
-	return sys->private_data;
-}
-
 static inline u32 pcie_read(struct xilinx_pcie_port *port, u32 reg)
 {
 	return readl(port->reg_base + reg);
@@ -163,7 +157,7 @@ static void xilinx_pcie_clear_err_interrupts(struct xilinx_pcie_port *port)
  */
 static bool xilinx_pcie_valid_device(struct pci_bus *bus, unsigned int devfn)
 {
-	struct xilinx_pcie_port *port = sys_to_pcie(bus->sysdata);
+	struct xilinx_pcie_port *port = bus->sysdata;
 
 	/* Check if link is up when trying to access downstream ports */
 	if (bus->number != port->root_busno)
@@ -196,7 +190,7 @@ static bool xilinx_pcie_valid_device(struct pci_bus *bus, unsigned int devfn)
 static void __iomem *xilinx_pcie_map_bus(struct pci_bus *bus,
 					 unsigned int devfn, int where)
 {
-	struct xilinx_pcie_port *port = sys_to_pcie(bus->sysdata);
+	struct xilinx_pcie_port *port = bus->sysdata;
 	int relbus;
 
 	if (!xilinx_pcie_valid_device(bus, devfn))
@@ -228,7 +222,7 @@ static void xilinx_pcie_destroy_msi(unsigned int irq)
 
 	if (!test_bit(irq, msi_irq_in_use)) {
 		msi = irq_get_msi_desc(irq);
-		port = sys_to_pcie(msi_desc_to_pci_sysdata(msi));
+		port = msi_desc_to_pci_sysdata(msi);
 		dev_err(port->dev, "Trying to free unused MSI#%d\n", irq);
 	} else {
 		clear_bit(irq, msi_irq_in_use);
@@ -277,7 +271,7 @@ static int xilinx_pcie_msi_setup_irq(struct msi_controller *chip,
 				     struct pci_dev *pdev,
 				     struct msi_desc *desc)
 {
-	struct xilinx_pcie_port *port = sys_to_pcie(pdev->bus->sysdata);
+	struct xilinx_pcie_port *port = pdev->bus->sysdata;
 	unsigned int irq;
 	int hwirq;
 	struct msi_msg msg;
@@ -614,47 +608,6 @@ static void xilinx_pcie_init_port(struct xilinx_pcie_port *port)
 }
 
 /**
- * xilinx_pcie_setup - Setup memory resources
- * @nr: Bus number
- * @sys: Per controller structure
- *
- * Return: '1' on success and error value on failure
- */
-static int xilinx_pcie_setup(int nr, struct pci_sys_data *sys)
-{
-	struct xilinx_pcie_port *port = sys_to_pcie(sys);
-
-	list_splice_init(&port->resources, &sys->resources);
-
-	return 1;
-}
-
-/**
- * xilinx_pcie_scan_bus - Scan PCIe bus for devices
- * @nr: Bus number
- * @sys: Per controller structure
- *
- * Return: Valid Bus pointer on success and NULL on failure
- */
-static struct pci_bus *xilinx_pcie_scan_bus(int nr, struct pci_sys_data *sys)
-{
-	struct xilinx_pcie_port *port = sys_to_pcie(sys);
-	struct pci_bus *bus;
-
-	port->root_busno = sys->busnr;
-
-	if (IS_ENABLED(CONFIG_PCI_MSI))
-		bus = pci_scan_root_bus_msi(port->dev, sys->busnr,
-					    &xilinx_pcie_ops, sys,
-					    &sys->resources,
-					    &xilinx_pcie_msi_chip);
-	else
-		bus = pci_scan_root_bus(port->dev, sys->busnr,
-					&xilinx_pcie_ops, sys, &sys->resources);
-	return bus;
-}
-
-/**
  * xilinx_pcie_parse_dt - Parse Device tree
  * @port: PCIe port information
  *
@@ -704,8 +657,9 @@ static int xilinx_pcie_parse_dt(struct xilinx_pcie_port *port)
 static int xilinx_pcie_probe(struct platform_device *pdev)
 {
 	struct xilinx_pcie_port *port;
-	struct hw_pci hw;
 	struct device *dev = &pdev->dev;
+	struct pci_bus *bus;
+
 	int err;
 	resource_size_t iobase = 0;
 	LIST_HEAD(res);
@@ -739,24 +693,20 @@ static int xilinx_pcie_probe(struct platform_device *pdev)
 		dev_err(dev, "Getting bridge resources failed\n");
 		return err;
 	}
-
-	platform_set_drvdata(pdev, port);
-
-	/* Register the device */
-	memset(&hw, 0, sizeof(hw));
-	hw = (struct hw_pci) {
-		.nr_controllers	= 1,
-		.private_data	= (void **)&port,
-		.setup		= xilinx_pcie_setup,
-		.map_irq	= of_irq_parse_and_map_pci,
-		.scan		= xilinx_pcie_scan_bus,
-		.ops		= &xilinx_pcie_ops,
-	};
+	bus = pci_create_root_bus(&pdev->dev, 0,
+				  &xilinx_pcie_ops, port, &res);
+	if (!bus)
+		return -ENOMEM;
 
 #ifdef CONFIG_PCI_MSI
 	xilinx_pcie_msi_chip.dev = port->dev;
+	bus->msi = &xilinx_pcie_msi_chip;
 #endif
-	pci_common_init_dev(dev, &hw);
+	pci_scan_child_bus(bus);
+	pci_assign_unassigned_bus_resources(bus);
+	pci_fixup_irqs(pci_common_swizzle, of_irq_parse_and_map_pci);
+	pci_bus_add_devices(bus);
+	platform_set_drvdata(pdev, port);
 
 	return 0;
 }
-- 
2.1.1

[PATCH V3 2/5] PCI: xilinx: Removing struct hw_pci structure.

[Bharat Kumar Gogada]

Removing struct hw_pci and adding generic PCI core API's.

Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com>
Signed-off-by: Ravi Kiran Gummaluri <rgummal@xilinx.com>
---
Changes:
Removing architecure dependecy structure struct hw_pci which is ARM 32-bit
specific structure, and adding generic PCI core API's to register to
PCI subsytem.
Removing funtions which are not being used with generic API's.
---
 drivers/pci/host/pcie-xilinx.c | 82 +++++++++---------------------------------
 1 file changed, 16 insertions(+), 66 deletions(-)

diff --git a/drivers/pci/host/pcie-xilinx.c b/drivers/pci/host/pcie-xilinx.c
index 627878d..13fec35 100644
--- a/drivers/pci/host/pcie-xilinx.c
+++ b/drivers/pci/host/pcie-xilinx.c
@@ -111,17 +111,11 @@ struct xilinx_pcie_port {
 	u8 root_busno;
 	struct device *dev;
 	struct irq_domain *irq_domain;
-	struct resource bus_range;
 	struct list_head resources;
 };
 
 static DECLARE_BITMAP(msi_irq_in_use, XILINX_NUM_MSI_IRQS);
 
-static inline struct xilinx_pcie_port *sys_to_pcie(struct pci_sys_data *sys)
-{
-	return sys->private_data;
-}
-
 static inline u32 pcie_read(struct xilinx_pcie_port *port, u32 reg)
 {
 	return readl(port->reg_base + reg);
@@ -163,7 +157,7 @@ static void xilinx_pcie_clear_err_interrupts(struct xilinx_pcie_port *port)
  */
 static bool xilinx_pcie_valid_device(struct pci_bus *bus, unsigned int devfn)
 {
-	struct xilinx_pcie_port *port = sys_to_pcie(bus->sysdata);
+	struct xilinx_pcie_port *port = bus->sysdata;
 
 	/* Check if link is up when trying to access downstream ports */
 	if (bus->number != port->root_busno)
@@ -196,7 +190,7 @@ static bool xilinx_pcie_valid_device(struct pci_bus *bus, unsigned int devfn)
 static void __iomem *xilinx_pcie_map_bus(struct pci_bus *bus,
 					 unsigned int devfn, int where)
 {
-	struct xilinx_pcie_port *port = sys_to_pcie(bus->sysdata);
+	struct xilinx_pcie_port *port = bus->sysdata;
 	int relbus;
 
 	if (!xilinx_pcie_valid_device(bus, devfn))
@@ -228,7 +222,7 @@ static void xilinx_pcie_destroy_msi(unsigned int irq)
 
 	if (!test_bit(irq, msi_irq_in_use)) {
 		msi = irq_get_msi_desc(irq);
-		port = sys_to_pcie(msi_desc_to_pci_sysdata(msi));
+		port = msi_desc_to_pci_sysdata(msi);
 		dev_err(port->dev, "Trying to free unused MSI#%d\n", irq);
 	} else {
 		clear_bit(irq, msi_irq_in_use);
@@ -277,7 +271,7 @@ static int xilinx_pcie_msi_setup_irq(struct msi_controller *chip,
 				     struct pci_dev *pdev,
 				     struct msi_desc *desc)
 {
-	struct xilinx_pcie_port *port = sys_to_pcie(pdev->bus->sysdata);
+	struct xilinx_pcie_port *port = pdev->bus->sysdata;
 	unsigned int irq;
 	int hwirq;
 	struct msi_msg msg;
@@ -614,47 +608,6 @@ static void xilinx_pcie_init_port(struct xilinx_pcie_port *port)
 }
 
 /**
- * xilinx_pcie_setup - Setup memory resources
- * @nr: Bus number
- * @sys: Per controller structure
- *
- * Return: '1' on success and error value on failure
- */
-static int xilinx_pcie_setup(int nr, struct pci_sys_data *sys)
-{
-	struct xilinx_pcie_port *port = sys_to_pcie(sys);
-
-	list_splice_init(&port->resources, &sys->resources);
-
-	return 1;
-}
-
-/**
- * xilinx_pcie_scan_bus - Scan PCIe bus for devices
- * @nr: Bus number
- * @sys: Per controller structure
- *
- * Return: Valid Bus pointer on success and NULL on failure
- */
-static struct pci_bus *xilinx_pcie_scan_bus(int nr, struct pci_sys_data *sys)
-{
-	struct xilinx_pcie_port *port = sys_to_pcie(sys);
-	struct pci_bus *bus;
-
-	port->root_busno = sys->busnr;
-
-	if (IS_ENABLED(CONFIG_PCI_MSI))
-		bus = pci_scan_root_bus_msi(port->dev, sys->busnr,
-					    &xilinx_pcie_ops, sys,
-					    &sys->resources,
-					    &xilinx_pcie_msi_chip);
-	else
-		bus = pci_scan_root_bus(port->dev, sys->busnr,
-					&xilinx_pcie_ops, sys, &sys->resources);
-	return bus;
-}
-
-/**
  * xilinx_pcie_parse_dt - Parse Device tree
  * @port: PCIe port information
  *
@@ -704,8 +657,9 @@ static int xilinx_pcie_parse_dt(struct xilinx_pcie_port *port)
 static int xilinx_pcie_probe(struct platform_device *pdev)
 {
 	struct xilinx_pcie_port *port;
-	struct hw_pci hw;
 	struct device *dev = &pdev->dev;
+	struct pci_bus *bus;
+
 	int err;
 	resource_size_t iobase = 0;
 	LIST_HEAD(res);
@@ -739,24 +693,20 @@ static int xilinx_pcie_probe(struct platform_device *pdev)
 		dev_err(dev, "Getting bridge resources failed\n");
 		return err;
 	}
-
-	platform_set_drvdata(pdev, port);
-
-	/* Register the device */
-	memset(&hw, 0, sizeof(hw));
-	hw = (struct hw_pci) {
-		.nr_controllers	= 1,
-		.private_data	= (void **)&port,
-		.setup		= xilinx_pcie_setup,
-		.map_irq	= of_irq_parse_and_map_pci,
-		.scan		= xilinx_pcie_scan_bus,
-		.ops		= &xilinx_pcie_ops,
-	};
+	bus = pci_create_root_bus(&pdev->dev, 0,
+				  &xilinx_pcie_ops, port, &res);
+	if (!bus)
+		return -ENOMEM;
 
 #ifdef CONFIG_PCI_MSI
 	xilinx_pcie_msi_chip.dev = port->dev;
+	bus->msi = &xilinx_pcie_msi_chip;
 #endif
-	pci_common_init_dev(dev, &hw);
+	pci_scan_child_bus(bus);
+	pci_assign_unassigned_bus_resources(bus);
+	pci_fixup_irqs(pci_common_swizzle, of_irq_parse_and_map_pci);
+	pci_bus_add_devices(bus);
+	platform_set_drvdata(pdev, port);
 
 	return 0;
 }
-- 
2.1.1

[PATCH V3 2/5] PCI: xilinx: Removing struct hw_pci structure.

[Bharat Kumar Gogada]

Removing struct hw_pci and adding generic PCI core API's.

Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com>
Signed-off-by: Ravi Kiran Gummaluri <rgummal@xilinx.com>
---
Changes:
Removing architecure dependecy structure struct hw_pci which is ARM 32-bit
specific structure, and adding generic PCI core API's to register to
PCI subsytem.
Removing funtions which are not being used with generic API's.
---
 drivers/pci/host/pcie-xilinx.c | 82 +++++++++---------------------------------
 1 file changed, 16 insertions(+), 66 deletions(-)

diff --git a/drivers/pci/host/pcie-xilinx.c b/drivers/pci/host/pcie-xilinx.c
index 627878d..13fec35 100644
--- a/drivers/pci/host/pcie-xilinx.c
+++ b/drivers/pci/host/pcie-xilinx.c
@@ -111,17 +111,11 @@ struct xilinx_pcie_port {
 	u8 root_busno;
 	struct device *dev;
 	struct irq_domain *irq_domain;
-	struct resource bus_range;
 	struct list_head resources;
 };
 
 static DECLARE_BITMAP(msi_irq_in_use, XILINX_NUM_MSI_IRQS);
 
-static inline struct xilinx_pcie_port *sys_to_pcie(struct pci_sys_data *sys)
-{
-	return sys->private_data;
-}
-
 static inline u32 pcie_read(struct xilinx_pcie_port *port, u32 reg)
 {
 	return readl(port->reg_base + reg);
@@ -163,7 +157,7 @@ static void xilinx_pcie_clear_err_interrupts(struct xilinx_pcie_port *port)
  */
 static bool xilinx_pcie_valid_device(struct pci_bus *bus, unsigned int devfn)
 {
-	struct xilinx_pcie_port *port = sys_to_pcie(bus->sysdata);
+	struct xilinx_pcie_port *port = bus->sysdata;
 
 	/* Check if link is up when trying to access downstream ports */
 	if (bus->number != port->root_busno)
@@ -196,7 +190,7 @@ static bool xilinx_pcie_valid_device(struct pci_bus *bus, unsigned int devfn)
 static void __iomem *xilinx_pcie_map_bus(struct pci_bus *bus,
 					 unsigned int devfn, int where)
 {
-	struct xilinx_pcie_port *port = sys_to_pcie(bus->sysdata);
+	struct xilinx_pcie_port *port = bus->sysdata;
 	int relbus;
 
 	if (!xilinx_pcie_valid_device(bus, devfn))
@@ -228,7 +222,7 @@ static void xilinx_pcie_destroy_msi(unsigned int irq)
 
 	if (!test_bit(irq, msi_irq_in_use)) {
 		msi = irq_get_msi_desc(irq);
-		port = sys_to_pcie(msi_desc_to_pci_sysdata(msi));
+		port = msi_desc_to_pci_sysdata(msi);
 		dev_err(port->dev, "Trying to free unused MSI#%d\n", irq);
 	} else {
 		clear_bit(irq, msi_irq_in_use);
@@ -277,7 +271,7 @@ static int xilinx_pcie_msi_setup_irq(struct msi_controller *chip,
 				     struct pci_dev *pdev,
 				     struct msi_desc *desc)
 {
-	struct xilinx_pcie_port *port = sys_to_pcie(pdev->bus->sysdata);
+	struct xilinx_pcie_port *port = pdev->bus->sysdata;
 	unsigned int irq;
 	int hwirq;
 	struct msi_msg msg;
@@ -614,47 +608,6 @@ static void xilinx_pcie_init_port(struct xilinx_pcie_port *port)
 }
 
 /**
- * xilinx_pcie_setup - Setup memory resources
- * @nr: Bus number
- * @sys: Per controller structure
- *
- * Return: '1' on success and error value on failure
- */
-static int xilinx_pcie_setup(int nr, struct pci_sys_data *sys)
-{
-	struct xilinx_pcie_port *port = sys_to_pcie(sys);
-
-	list_splice_init(&port->resources, &sys->resources);
-
-	return 1;
-}
-
-/**
- * xilinx_pcie_scan_bus - Scan PCIe bus for devices
- * @nr: Bus number
- * @sys: Per controller structure
- *
- * Return: Valid Bus pointer on success and NULL on failure
- */
-static struct pci_bus *xilinx_pcie_scan_bus(int nr, struct pci_sys_data *sys)
-{
-	struct xilinx_pcie_port *port = sys_to_pcie(sys);
-	struct pci_bus *bus;
-
-	port->root_busno = sys->busnr;
-
-	if (IS_ENABLED(CONFIG_PCI_MSI))
-		bus = pci_scan_root_bus_msi(port->dev, sys->busnr,
-					    &xilinx_pcie_ops, sys,
-					    &sys->resources,
-					    &xilinx_pcie_msi_chip);
-	else
-		bus = pci_scan_root_bus(port->dev, sys->busnr,
-					&xilinx_pcie_ops, sys, &sys->resources);
-	return bus;
-}
-
-/**
  * xilinx_pcie_parse_dt - Parse Device tree
  * @port: PCIe port information
  *
@@ -704,8 +657,9 @@ static int xilinx_pcie_parse_dt(struct xilinx_pcie_port *port)
 static int xilinx_pcie_probe(struct platform_device *pdev)
 {
 	struct xilinx_pcie_port *port;
-	struct hw_pci hw;
 	struct device *dev = &pdev->dev;
+	struct pci_bus *bus;
+
 	int err;
 	resource_size_t iobase = 0;
 	LIST_HEAD(res);
@@ -739,24 +693,20 @@ static int xilinx_pcie_probe(struct platform_device *pdev)
 		dev_err(dev, "Getting bridge resources failed\n");
 		return err;
 	}
-
-	platform_set_drvdata(pdev, port);
-
-	/* Register the device */
-	memset(&hw, 0, sizeof(hw));
-	hw = (struct hw_pci) {
-		.nr_controllers	= 1,
-		.private_data	= (void **)&port,
-		.setup		= xilinx_pcie_setup,
-		.map_irq	= of_irq_parse_and_map_pci,
-		.scan		= xilinx_pcie_scan_bus,
-		.ops		= &xilinx_pcie_ops,
-	};
+	bus = pci_create_root_bus(&pdev->dev, 0,
+				  &xilinx_pcie_ops, port, &res);
+	if (!bus)
+		return -ENOMEM;
 
 #ifdef CONFIG_PCI_MSI
 	xilinx_pcie_msi_chip.dev = port->dev;
+	bus->msi = &xilinx_pcie_msi_chip;
 #endif
-	pci_common_init_dev(dev, &hw);
+	pci_scan_child_bus(bus);
+	pci_assign_unassigned_bus_resources(bus);
+	pci_fixup_irqs(pci_common_swizzle, of_irq_parse_and_map_pci);
+	pci_bus_add_devices(bus);
+	platform_set_drvdata(pdev, port);
 
 	return 0;
 }
-- 
2.1.1

[PATCH V3 3/5] PCI: xilinx: Modifying AXI PCIe Host Bridge driver to work on both Zynq and Microblaze

[Bharat Kumar Gogada]

Modifying Xilinx AXI PCIe Host Bridge Soft IP driver to work on both
Zynq and Microblaze Architectures.
With these modifications drivers/pci/host/pcie-xilinx.c, will
work on both Zynq and Microblaze Architectures.

Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com>
Signed-off-by: Ravi Kiran Gummaluri <rgummal@xilinx.com>
---
Changes:
Removed unneccessary architecture dependent number of MSI's.
Added #ifdef to pci_fixup_irqs which is ARM specific API.
---
 drivers/pci/host/pcie-xilinx.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/pci/host/pcie-xilinx.c b/drivers/pci/host/pcie-xilinx.c
index 13fec35..6cbce34 100644
--- a/drivers/pci/host/pcie-xilinx.c
+++ b/drivers/pci/host/pcie-xilinx.c
@@ -704,7 +704,9 @@ static int xilinx_pcie_probe(struct platform_device *pdev)
 #endif
 	pci_scan_child_bus(bus);
 	pci_assign_unassigned_bus_resources(bus);
+#ifdef CONFIG_ARM
 	pci_fixup_irqs(pci_common_swizzle, of_irq_parse_and_map_pci);
+#endif
 	pci_bus_add_devices(bus);
 	platform_set_drvdata(pdev, port);
 
-- 
2.1.1

[PATCH V3 3/5] PCI: xilinx: Modifying AXI PCIe Host Bridge driver to work on both Zynq and Microblaze

[Bharat Kumar Gogada]

Modifying Xilinx AXI PCIe Host Bridge Soft IP driver to work on both
Zynq and Microblaze Architectures.
With these modifications drivers/pci/host/pcie-xilinx.c, will
work on both Zynq and Microblaze Architectures.

Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com>
Signed-off-by: Ravi Kiran Gummaluri <rgummal@xilinx.com>
---
Changes:
Removed unneccessary architecture dependent number of MSI's.
Added #ifdef to pci_fixup_irqs which is ARM specific API.
---
 drivers/pci/host/pcie-xilinx.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/pci/host/pcie-xilinx.c b/drivers/pci/host/pcie-xilinx.c
index 13fec35..6cbce34 100644
--- a/drivers/pci/host/pcie-xilinx.c
+++ b/drivers/pci/host/pcie-xilinx.c
@@ -704,7 +704,9 @@ static int xilinx_pcie_probe(struct platform_device *pdev)
 #endif
 	pci_scan_child_bus(bus);
 	pci_assign_unassigned_bus_resources(bus);
+#ifdef CONFIG_ARM
 	pci_fixup_irqs(pci_common_swizzle, of_irq_parse_and_map_pci);
+#endif
 	pci_bus_add_devices(bus);
 	platform_set_drvdata(pdev, port);
 
-- 
2.1.1

[PATCH V3 3/5] PCI: xilinx: Modifying AXI PCIe Host Bridge driver to work on both Zynq and Microblaze

[Bharat Kumar Gogada]

Modifying Xilinx AXI PCIe Host Bridge Soft IP driver to work on both
Zynq and Microblaze Architectures.
With these modifications drivers/pci/host/pcie-xilinx.c, will
work on both Zynq and Microblaze Architectures.

Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com>
Signed-off-by: Ravi Kiran Gummaluri <rgummal@xilinx.com>
---
Changes:
Removed unneccessary architecture dependent number of MSI's.
Added #ifdef to pci_fixup_irqs which is ARM specific API.
---
 drivers/pci/host/pcie-xilinx.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/pci/host/pcie-xilinx.c b/drivers/pci/host/pcie-xilinx.c
index 13fec35..6cbce34 100644
--- a/drivers/pci/host/pcie-xilinx.c
+++ b/drivers/pci/host/pcie-xilinx.c
@@ -704,7 +704,9 @@ static int xilinx_pcie_probe(struct platform_device *pdev)
 #endif
 	pci_scan_child_bus(bus);
 	pci_assign_unassigned_bus_resources(bus);
+#ifdef CONFIG_ARM
 	pci_fixup_irqs(pci_common_swizzle, of_irq_parse_and_map_pci);
+#endif
 	pci_bus_add_devices(bus);
 	platform_set_drvdata(pdev, port);
 
-- 
2.1.1

[PATCH V3 4/5] PCI: xilinx: Updating Zynq PCI binding documentation with Microblaze node.

[Bharat Kumar Gogada]

Updated Zynq PCI binding documentation with Microblaze node.

Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com>
Signed-off-by: Ravi Kiran Gummaluri <rgummal@xilinx.com>

Acked-by: Rob Herring <robh@kernel.org>
---
Changes:
Adding Microblaze device tree node Documnetation.
Made bus-range property optional for Microblaze.
---
 .../devicetree/bindings/pci/xilinx-pcie.txt        | 32 ++++++++++++++++++++--
 1 file changed, 29 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/pci/xilinx-pcie.txt b/Documentation/devicetree/bindings/pci/xilinx-pcie.txt
index 02f979a..ad7c7bf 100644
--- a/Documentation/devicetree/bindings/pci/xilinx-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/xilinx-pcie.txt
@@ -17,7 +17,7 @@ Required properties:
 	Please refer to the standard PCI bus binding document for a more
 	detailed explanation
 
-Optional properties:
+Optional properties for Zynq/Microblaze:
 - bus-range: PCI bus numbers covered
 
 Interrupt controller child node
@@ -38,13 +38,13 @@ the four INTx interrupts in ISR and route them to this domain.
 
 Example:
 ++++++++
-
+Zynq:
 	pci_express: axi-pcie@50000000 {
 		#address-cells = <3>;
 		#size-cells = <2>;
 		#interrupt-cells = <1>;
 		compatible = "xlnx,axi-pcie-host-1.00.a";
-		reg = < 0x50000000 0x10000000 >;
+		reg = < 0x50000000 0x1000000 >;
 		device_type = "pci";
 		interrupts = < 0 52 4 >;
 		interrupt-map-mask = <0 0 0 7>;
@@ -60,3 +60,29 @@ Example:
 			#interrupt-cells = <1>;
 		};
 	};
+
+
+Microblaze:
+	pci_express: axi-pcie@10000000 {
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		compatible = "xlnx,axi-pcie-host-1.00.a";
+		reg = <0x10000000 0x4000000>;
+		device_type = "pci";
+		interrupt-parent = <&microbalze_0_intc>;
+		interrupts = <1 2>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie_intc 1>,
+				<0 0 0 2 &pcie_intc 2>,
+				<0 0 0 3 &pcie_intc 3>,
+				<0 0 0 4 &pcie_intc 4>;
+		ranges = <0x02000000 0x00000000 0x80000000 0x80000000 0x00000000 0x10000000>;
+
+		pcie_intc: interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+		};
+
+	};
-- 
2.1.1

[PATCH V3 4/5] PCI: xilinx: Updating Zynq PCI binding documentation with Microblaze node.

[Bharat Kumar Gogada]

Updated Zynq PCI binding documentation with Microblaze node.

Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com>
Signed-off-by: Ravi Kiran Gummaluri <rgummal@xilinx.com>

Acked-by: Rob Herring <robh@kernel.org>
---
Changes:
Adding Microblaze device tree node Documnetation.
Made bus-range property optional for Microblaze.
---
 .../devicetree/bindings/pci/xilinx-pcie.txt        | 32 ++++++++++++++++++++--
 1 file changed, 29 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/pci/xilinx-pcie.txt b/Documentation/devicetree/bindings/pci/xilinx-pcie.txt
index 02f979a..ad7c7bf 100644
--- a/Documentation/devicetree/bindings/pci/xilinx-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/xilinx-pcie.txt
@@ -17,7 +17,7 @@ Required properties:
 	Please refer to the standard PCI bus binding document for a more
 	detailed explanation
 
-Optional properties:
+Optional properties for Zynq/Microblaze:
 - bus-range: PCI bus numbers covered
 
 Interrupt controller child node
@@ -38,13 +38,13 @@ the four INTx interrupts in ISR and route them to this domain.
 
 Example:
 ++++++++
-
+Zynq:
 	pci_express: axi-pcie@50000000 {
 		#address-cells = <3>;
 		#size-cells = <2>;
 		#interrupt-cells = <1>;
 		compatible = "xlnx,axi-pcie-host-1.00.a";
-		reg = < 0x50000000 0x10000000 >;
+		reg = < 0x50000000 0x1000000 >;
 		device_type = "pci";
 		interrupts = < 0 52 4 >;
 		interrupt-map-mask = <0 0 0 7>;
@@ -60,3 +60,29 @@ Example:
 			#interrupt-cells = <1>;
 		};
 	};
+
+
+Microblaze:
+	pci_express: axi-pcie@10000000 {
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		compatible = "xlnx,axi-pcie-host-1.00.a";
+		reg = <0x10000000 0x4000000>;
+		device_type = "pci";
+		interrupt-parent = <&microbalze_0_intc>;
+		interrupts = <1 2>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie_intc 1>,
+				<0 0 0 2 &pcie_intc 2>,
+				<0 0 0 3 &pcie_intc 3>,
+				<0 0 0 4 &pcie_intc 4>;
+		ranges = <0x02000000 0x00000000 0x80000000 0x80000000 0x00000000 0x10000000>;
+
+		pcie_intc: interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+		};
+
+	};
-- 
2.1.1

[PATCH V3 4/5] PCI: xilinx: Updating Zynq PCI binding documentation with Microblaze node.

[Bharat Kumar Gogada]

Updated Zynq PCI binding documentation with Microblaze node.

Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com>
Signed-off-by: Ravi Kiran Gummaluri <rgummal@xilinx.com>

Acked-by: Rob Herring <robh@kernel.org>
---
Changes:
Adding Microblaze device tree node Documnetation.
Made bus-range property optional for Microblaze.
---
 .../devicetree/bindings/pci/xilinx-pcie.txt        | 32 ++++++++++++++++++++--
 1 file changed, 29 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/pci/xilinx-pcie.txt b/Documentation/devicetree/bindings/pci/xilinx-pcie.txt
index 02f979a..ad7c7bf 100644
--- a/Documentation/devicetree/bindings/pci/xilinx-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/xilinx-pcie.txt
@@ -17,7 +17,7 @@ Required properties:
 	Please refer to the standard PCI bus binding document for a more
 	detailed explanation
 
-Optional properties:
+Optional properties for Zynq/Microblaze:
 - bus-range: PCI bus numbers covered
 
 Interrupt controller child node
@@ -38,13 +38,13 @@ the four INTx interrupts in ISR and route them to this domain.
 
 Example:
 ++++++++
-
+Zynq:
 	pci_express: axi-pcie at 50000000 {
 		#address-cells = <3>;
 		#size-cells = <2>;
 		#interrupt-cells = <1>;
 		compatible = "xlnx,axi-pcie-host-1.00.a";
-		reg = < 0x50000000 0x10000000 >;
+		reg = < 0x50000000 0x1000000 >;
 		device_type = "pci";
 		interrupts = < 0 52 4 >;
 		interrupt-map-mask = <0 0 0 7>;
@@ -60,3 +60,29 @@ Example:
 			#interrupt-cells = <1>;
 		};
 	};
+
+
+Microblaze:
+	pci_express: axi-pcie at 10000000 {
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		compatible = "xlnx,axi-pcie-host-1.00.a";
+		reg = <0x10000000 0x4000000>;
+		device_type = "pci";
+		interrupt-parent = <&microbalze_0_intc>;
+		interrupts = <1 2>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie_intc 1>,
+				<0 0 0 2 &pcie_intc 2>,
+				<0 0 0 3 &pcie_intc 3>,
+				<0 0 0 4 &pcie_intc 4>;
+		ranges = <0x02000000 0x00000000 0x80000000 0x80000000 0x00000000 0x10000000>;
+
+		pcie_intc: interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+		};
+
+	};
-- 
2.1.1

[PATCH V3 5/5] Microblaze: Modifying microblaze PCI subsytem to support generic Xilinx AXI PCIe Host Bridge IP driver

[Bharat Kumar Gogada]

This patch does required modifications to microblaze PCI subsystem, to
work with generic driver (drivers/pci/host/pcie-xilinx.c) on Microblaze
and Zynq.

Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com>
Signed-off-by: Ravi Kiran Gummaluri <rgummal@xilinx.com>
---
Changes:
Removed pcibios_get_phb_of_node in pci-common.c, using generic version
instead.
Modified pcibios_fixup_bus in pci-common.c, as per generic architecuture.
Modified pcibios_align_resource in pci-common.c, as per generic
architecuture, removed temporary variable.
Removed pci_domain_nr in pci-common.c, instead using generic code.
Added pcibios_add_device in pci-common.c, as per generic architecuture.
Adding Kernel configuration in arch/microblaze as required for generic PCI
domains.
Added kernel configuration for driver to support Microblaze.
---
 arch/microblaze/Kconfig          |  3 +++
 arch/microblaze/pci/pci-common.c | 56 +++++++---------------------------------
 drivers/pci/host/Kconfig         |  2 +-
 3 files changed, 14 insertions(+), 47 deletions(-)

diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
index 0bce820..c3702b9 100644
--- a/arch/microblaze/Kconfig
+++ b/arch/microblaze/Kconfig
@@ -271,6 +271,9 @@ config PCI
 config PCI_DOMAINS
 	def_bool PCI
 
+config PCI_DOMAINS_GENERIC
+	def_bool PCI_DOMAINS
+
 config PCI_SYSCALL
 	def_bool PCI
 
diff --git a/arch/microblaze/pci/pci-common.c b/arch/microblaze/pci/pci-common.c
index ae838ed..35654be 100644
--- a/arch/microblaze/pci/pci-common.c
+++ b/arch/microblaze/pci/pci-common.c
@@ -123,17 +123,6 @@ unsigned long pci_address_to_pio(phys_addr_t address)
 }
 EXPORT_SYMBOL_GPL(pci_address_to_pio);
 
-/*
- * Return the domain number for this bus.
- */
-int pci_domain_nr(struct pci_bus *bus)
-{
-	struct pci_controller *hose = pci_bus_to_host(bus);
-
-	return hose->global_number;
-}
-EXPORT_SYMBOL(pci_domain_nr);
-
 /* This routine is meant to be used early during boot, when the
  * PCI bus numbers have not yet been assigned, and you need to
  * issue PCI config cycles to an OF device.
@@ -863,26 +852,10 @@ void pcibios_setup_bus_devices(struct pci_bus *bus)
 
 void pcibios_fixup_bus(struct pci_bus *bus)
 {
-	/* When called from the generic PCI probe, read PCI<->PCI bridge
-	 * bases. This is -not- called when generating the PCI tree from
-	 * the OF device-tree.
-	 */
-	if (bus->self != NULL)
-		pci_read_bridge_bases(bus);
-
-	/* Now fixup the bus bus */
-	pcibios_setup_bus_self(bus);
-
-	/* Now fixup devices on that bus */
-	pcibios_setup_bus_devices(bus);
+	/* nothing to do */
 }
 EXPORT_SYMBOL(pcibios_fixup_bus);
 
-static int skip_isa_ioresource_align(struct pci_dev *dev)
-{
-	return 0;
-}
-
 /*
  * We need to avoid collisions with `mirrored' VGA ports
  * and other strange ISA hardware, so we always want the
@@ -899,20 +872,18 @@ static int skip_isa_ioresource_align(struct pci_dev *dev)
 resource_size_t pcibios_align_resource(void *data, const struct resource *res,
 				resource_size_t size, resource_size_t align)
 {
-	struct pci_dev *dev = data;
-	resource_size_t start = res->start;
-
-	if (res->flags & IORESOURCE_IO) {
-		if (skip_isa_ioresource_align(dev))
-			return start;
-		if (start & 0x300)
-			start = (start + 0x3ff) & ~0x3ff;
-	}
-
-	return start;
+	return res->start;
 }
 EXPORT_SYMBOL(pcibios_align_resource);
 
+int pcibios_add_device(struct pci_dev *dev)
+{
+	dev->irq = of_irq_parse_and_map_pci(dev, 0, 0);
+
+	return 0;
+}
+EXPORT_SYMBOL(pcibios_add_device);
+
 /*
  * Reparent resource children of pr that conflict with res
  * under res, and make res replace those children.
@@ -1333,13 +1304,6 @@ static void pcibios_setup_phb_resources(struct pci_controller *hose,
 		 (unsigned long)hose->io_base_virt - _IO_BASE);
 }
 
-struct device_node *pcibios_get_phb_of_node(struct pci_bus *bus)
-{
-	struct pci_controller *hose = bus->sysdata;
-
-	return of_node_get(hose->dn);
-}
-
 static void pcibios_scan_phb(struct pci_controller *hose)
 {
 	LIST_HEAD(resources);
diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig
index d5e58ba..7c56c2e 100644
--- a/drivers/pci/host/Kconfig
+++ b/drivers/pci/host/Kconfig
@@ -79,7 +79,7 @@ config PCI_KEYSTONE
 
 config PCIE_XILINX
 	bool "Xilinx AXI PCIe host bridge support"
-	depends on ARCH_ZYNQ
+	depends on ARCH_ZYNQ || MICROBLAZE
 	help
 	  Say 'Y' here if you want kernel to support the Xilinx AXI PCIe
 	  Host Bridge driver.
-- 
2.1.1

[PATCH V3 5/5] Microblaze: Modifying microblaze PCI subsytem to support generic Xilinx AXI PCIe Host Bridge IP driver

[Bharat Kumar Gogada]

This patch does required modifications to microblaze PCI subsystem, to
work with generic driver (drivers/pci/host/pcie-xilinx.c) on Microblaze
and Zynq.

Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com>
Signed-off-by: Ravi Kiran Gummaluri <rgummal@xilinx.com>
---
Changes:
Removed pcibios_get_phb_of_node in pci-common.c, using generic version
instead.
Modified pcibios_fixup_bus in pci-common.c, as per generic architecuture.
Modified pcibios_align_resource in pci-common.c, as per generic
architecuture, removed temporary variable.
Removed pci_domain_nr in pci-common.c, instead using generic code.
Added pcibios_add_device in pci-common.c, as per generic architecuture.
Adding Kernel configuration in arch/microblaze as required for generic PCI
domains.
Added kernel configuration for driver to support Microblaze.
---
 arch/microblaze/Kconfig          |  3 +++
 arch/microblaze/pci/pci-common.c | 56 +++++++---------------------------------
 drivers/pci/host/Kconfig         |  2 +-
 3 files changed, 14 insertions(+), 47 deletions(-)

diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
index 0bce820..c3702b9 100644
--- a/arch/microblaze/Kconfig
+++ b/arch/microblaze/Kconfig
@@ -271,6 +271,9 @@ config PCI
 config PCI_DOMAINS
 	def_bool PCI
 
+config PCI_DOMAINS_GENERIC
+	def_bool PCI_DOMAINS
+
 config PCI_SYSCALL
 	def_bool PCI
 
diff --git a/arch/microblaze/pci/pci-common.c b/arch/microblaze/pci/pci-common.c
index ae838ed..35654be 100644
--- a/arch/microblaze/pci/pci-common.c
+++ b/arch/microblaze/pci/pci-common.c
@@ -123,17 +123,6 @@ unsigned long pci_address_to_pio(phys_addr_t address)
 }
 EXPORT_SYMBOL_GPL(pci_address_to_pio);
 
-/*
- * Return the domain number for this bus.
- */
-int pci_domain_nr(struct pci_bus *bus)
-{
-	struct pci_controller *hose = pci_bus_to_host(bus);
-
-	return hose->global_number;
-}
-EXPORT_SYMBOL(pci_domain_nr);
-
 /* This routine is meant to be used early during boot, when the
  * PCI bus numbers have not yet been assigned, and you need to
  * issue PCI config cycles to an OF device.
@@ -863,26 +852,10 @@ void pcibios_setup_bus_devices(struct pci_bus *bus)
 
 void pcibios_fixup_bus(struct pci_bus *bus)
 {
-	/* When called from the generic PCI probe, read PCI<->PCI bridge
-	 * bases. This is -not- called when generating the PCI tree from
-	 * the OF device-tree.
-	 */
-	if (bus->self != NULL)
-		pci_read_bridge_bases(bus);
-
-	/* Now fixup the bus bus */
-	pcibios_setup_bus_self(bus);
-
-	/* Now fixup devices on that bus */
-	pcibios_setup_bus_devices(bus);
+	/* nothing to do */
 }
 EXPORT_SYMBOL(pcibios_fixup_bus);
 
-static int skip_isa_ioresource_align(struct pci_dev *dev)
-{
-	return 0;
-}
-
 /*
  * We need to avoid collisions with `mirrored' VGA ports
  * and other strange ISA hardware, so we always want the
@@ -899,20 +872,18 @@ static int skip_isa_ioresource_align(struct pci_dev *dev)
 resource_size_t pcibios_align_resource(void *data, const struct resource *res,
 				resource_size_t size, resource_size_t align)
 {
-	struct pci_dev *dev = data;
-	resource_size_t start = res->start;
-
-	if (res->flags & IORESOURCE_IO) {
-		if (skip_isa_ioresource_align(dev))
-			return start;
-		if (start & 0x300)
-			start = (start + 0x3ff) & ~0x3ff;
-	}
-
-	return start;
+	return res->start;
 }
 EXPORT_SYMBOL(pcibios_align_resource);
 
+int pcibios_add_device(struct pci_dev *dev)
+{
+	dev->irq = of_irq_parse_and_map_pci(dev, 0, 0);
+
+	return 0;
+}
+EXPORT_SYMBOL(pcibios_add_device);
+
 /*
  * Reparent resource children of pr that conflict with res
  * under res, and make res replace those children.
@@ -1333,13 +1304,6 @@ static void pcibios_setup_phb_resources(struct pci_controller *hose,
 		 (unsigned long)hose->io_base_virt - _IO_BASE);
 }
 
-struct device_node *pcibios_get_phb_of_node(struct pci_bus *bus)
-{
-	struct pci_controller *hose = bus->sysdata;
-
-	return of_node_get(hose->dn);
-}
-
 static void pcibios_scan_phb(struct pci_controller *hose)
 {
 	LIST_HEAD(resources);
diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig
index d5e58ba..7c56c2e 100644
--- a/drivers/pci/host/Kconfig
+++ b/drivers/pci/host/Kconfig
@@ -79,7 +79,7 @@ config PCI_KEYSTONE
 
 config PCIE_XILINX
 	bool "Xilinx AXI PCIe host bridge support"
-	depends on ARCH_ZYNQ
+	depends on ARCH_ZYNQ || MICROBLAZE
 	help
 	  Say 'Y' here if you want kernel to support the Xilinx AXI PCIe
 	  Host Bridge driver.
-- 
2.1.1

[PATCH V3 5/5] Microblaze: Modifying microblaze PCI subsytem to support generic Xilinx AXI PCIe Host Bridge IP driver

[Bharat Kumar Gogada]

This patch does required modifications to microblaze PCI subsystem, to
work with generic driver (drivers/pci/host/pcie-xilinx.c) on Microblaze
and Zynq.

Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com>
Signed-off-by: Ravi Kiran Gummaluri <rgummal@xilinx.com>
---
Changes:
Removed pcibios_get_phb_of_node in pci-common.c, using generic version
instead.
Modified pcibios_fixup_bus in pci-common.c, as per generic architecuture.
Modified pcibios_align_resource in pci-common.c, as per generic
architecuture, removed temporary variable.
Removed pci_domain_nr in pci-common.c, instead using generic code.
Added pcibios_add_device in pci-common.c, as per generic architecuture.
Adding Kernel configuration in arch/microblaze as required for generic PCI
domains.
Added kernel configuration for driver to support Microblaze.
---
 arch/microblaze/Kconfig          |  3 +++
 arch/microblaze/pci/pci-common.c | 56 +++++++---------------------------------
 drivers/pci/host/Kconfig         |  2 +-
 3 files changed, 14 insertions(+), 47 deletions(-)

diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
index 0bce820..c3702b9 100644
--- a/arch/microblaze/Kconfig
+++ b/arch/microblaze/Kconfig
@@ -271,6 +271,9 @@ config PCI
 config PCI_DOMAINS
 	def_bool PCI
 
+config PCI_DOMAINS_GENERIC
+	def_bool PCI_DOMAINS
+
 config PCI_SYSCALL
 	def_bool PCI
 
diff --git a/arch/microblaze/pci/pci-common.c b/arch/microblaze/pci/pci-common.c
index ae838ed..35654be 100644
--- a/arch/microblaze/pci/pci-common.c
+++ b/arch/microblaze/pci/pci-common.c
@@ -123,17 +123,6 @@ unsigned long pci_address_to_pio(phys_addr_t address)
 }
 EXPORT_SYMBOL_GPL(pci_address_to_pio);
 
-/*
- * Return the domain number for this bus.
- */
-int pci_domain_nr(struct pci_bus *bus)
-{
-	struct pci_controller *hose = pci_bus_to_host(bus);
-
-	return hose->global_number;
-}
-EXPORT_SYMBOL(pci_domain_nr);
-
 /* This routine is meant to be used early during boot, when the
  * PCI bus numbers have not yet been assigned, and you need to
  * issue PCI config cycles to an OF device.
@@ -863,26 +852,10 @@ void pcibios_setup_bus_devices(struct pci_bus *bus)
 
 void pcibios_fixup_bus(struct pci_bus *bus)
 {
-	/* When called from the generic PCI probe, read PCI<->PCI bridge
-	 * bases. This is -not- called when generating the PCI tree from
-	 * the OF device-tree.
-	 */
-	if (bus->self != NULL)
-		pci_read_bridge_bases(bus);
-
-	/* Now fixup the bus bus */
-	pcibios_setup_bus_self(bus);
-
-	/* Now fixup devices on that bus */
-	pcibios_setup_bus_devices(bus);
+	/* nothing to do */
 }
 EXPORT_SYMBOL(pcibios_fixup_bus);
 
-static int skip_isa_ioresource_align(struct pci_dev *dev)
-{
-	return 0;
-}
-
 /*
  * We need to avoid collisions with `mirrored' VGA ports
  * and other strange ISA hardware, so we always want the
@@ -899,20 +872,18 @@ static int skip_isa_ioresource_align(struct pci_dev *dev)
 resource_size_t pcibios_align_resource(void *data, const struct resource *res,
 				resource_size_t size, resource_size_t align)
 {
-	struct pci_dev *dev = data;
-	resource_size_t start = res->start;
-
-	if (res->flags & IORESOURCE_IO) {
-		if (skip_isa_ioresource_align(dev))
-			return start;
-		if (start & 0x300)
-			start = (start + 0x3ff) & ~0x3ff;
-	}
-
-	return start;
+	return res->start;
 }
 EXPORT_SYMBOL(pcibios_align_resource);
 
+int pcibios_add_device(struct pci_dev *dev)
+{
+	dev->irq = of_irq_parse_and_map_pci(dev, 0, 0);
+
+	return 0;
+}
+EXPORT_SYMBOL(pcibios_add_device);
+
 /*
  * Reparent resource children of pr that conflict with res
  * under res, and make res replace those children.
@@ -1333,13 +1304,6 @@ static void pcibios_setup_phb_resources(struct pci_controller *hose,
 		 (unsigned long)hose->io_base_virt - _IO_BASE);
 }
 
-struct device_node *pcibios_get_phb_of_node(struct pci_bus *bus)
-{
-	struct pci_controller *hose = bus->sysdata;
-
-	return of_node_get(hose->dn);
-}
-
 static void pcibios_scan_phb(struct pci_controller *hose)
 {
 	LIST_HEAD(resources);
diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig
index d5e58ba..7c56c2e 100644
--- a/drivers/pci/host/Kconfig
+++ b/drivers/pci/host/Kconfig
@@ -79,7 +79,7 @@ config PCI_KEYSTONE
 
 config PCIE_XILINX
 	bool "Xilinx AXI PCIe host bridge support"
-	depends on ARCH_ZYNQ
+	depends on ARCH_ZYNQ || MICROBLAZE
 	help
 	  Say 'Y' here if you want kernel to support the Xilinx AXI PCIe
 	  Host Bridge driver.
-- 
2.1.1

Re: [PATCH V3 0/5] PCIe Xilinx generic driver for Microblaze and

[Arnd Bergmann]

On Tuesday 09 February 2016 16:11:53 Bharat Kumar Gogada wrote:
> This patch series does modifications to pcie-xilinx.c, to support common
> driver on both Zynq and Microblaze architectures.
> Microblaze pci-common.c has been modified to support generic driver.
> 
> Bharat Kumar Gogada (5):
>   PCI: xilinx: Removing xilinx_pcie_parse_and_add_res function
>   PCI: xilinx: Removing struct hw_pci structure.
>   PCI: xilinx: Modifying AXI PCIe Host Bridge driver to     work on both
>      Zynq and Microblaze
>   PCI: xilinx: Updating Zynq PCI binding documentation     with 
>     Microblaze node.
>   Microblaze: Modifying microblaze PCI subsytem to     support  generic
>     Xilinx  AXI PCIe Host Bridge IP driver
> 

Reviewed-by: Arnd Bergmann <arnd@arndb.de>

I'm still not happy about needing the pci_fixup_irqs in patch 3/5, but
I can understand that fixing this is beyond the scope of your series.

	Arnd

[PATCH V3 0/5] PCIe Xilinx generic driver for Microblaze and

[Arnd Bergmann]

On Tuesday 09 February 2016 16:11:53 Bharat Kumar Gogada wrote:
> This patch series does modifications to pcie-xilinx.c, to support common
> driver on both Zynq and Microblaze architectures.
> Microblaze pci-common.c has been modified to support generic driver.
> 
> Bharat Kumar Gogada (5):
>   PCI: xilinx: Removing xilinx_pcie_parse_and_add_res function
>   PCI: xilinx: Removing struct hw_pci structure.
>   PCI: xilinx: Modifying AXI PCIe Host Bridge driver to     work on both
>      Zynq and Microblaze
>   PCI: xilinx: Updating Zynq PCI binding documentation     with 
>     Microblaze node.
>   Microblaze: Modifying microblaze PCI subsytem to     support  generic
>     Xilinx  AXI PCIe Host Bridge IP driver
> 

Reviewed-by: Arnd Bergmann <arnd@arndb.de>

I'm still not happy about needing the pci_fixup_irqs in patch 3/5, but
I can understand that fixing this is beyond the scope of your series.

	Arnd

Re: [PATCH V3 3/5] PCI: xilinx: Modifying AXI PCIe Host Bridge driver to work on both Zynq and Microblaze

[Paul Burton]

On Tue, Feb 09, 2016 at 04:11:56PM +0530, Bharat Kumar Gogada wrote:
> Modifying Xilinx AXI PCIe Host Bridge Soft IP driver to work on both
> Zynq and Microblaze Architectures.
> With these modifications drivers/pci/host/pcie-xilinx.c, will
> work on both Zynq and Microblaze Architectures.
> 
> Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com>
> Signed-off-by: Ravi Kiran Gummaluri <rgummal@xilinx.com>
> ---
> Changes:
> Removed unneccessary architecture dependent number of MSI's.
> Added #ifdef to pci_fixup_irqs which is ARM specific API.

Hi Bharat,

Why do you say pci_fixup_irqs is ARM-specific? It's declared in
include/linux/pci.h, defined in drivers/pci/setup-irq.c & used by
multiple architectures (alpha, arm, m68k, mips, sh, sparc, tile,
unicore32 from a quick grep).

Will you not break INTX-style interrupts by removing this?

Thanks,
    Paul

> ---
>  drivers/pci/host/pcie-xilinx.c | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/drivers/pci/host/pcie-xilinx.c b/drivers/pci/host/pcie-xilinx.c
> index 13fec35..6cbce34 100644
> --- a/drivers/pci/host/pcie-xilinx.c
> +++ b/drivers/pci/host/pcie-xilinx.c
> @@ -704,7 +704,9 @@ static int xilinx_pcie_probe(struct platform_device *pdev)
>  #endif
>  	pci_scan_child_bus(bus);
>  	pci_assign_unassigned_bus_resources(bus);
> +#ifdef CONFIG_ARM
>  	pci_fixup_irqs(pci_common_swizzle, of_irq_parse_and_map_pci);
> +#endif
>  	pci_bus_add_devices(bus);
>  	platform_set_drvdata(pdev, port);
>  
> -- 
> 2.1.1
> 

Re: [PATCH V3 3/5] PCI: xilinx: Modifying AXI PCIe Host Bridge driver to work on both Zynq and Microblaze

[Paul Burton]

On Tue, Feb 09, 2016 at 04:11:56PM +0530, Bharat Kumar Gogada wrote:
> Modifying Xilinx AXI PCIe Host Bridge Soft IP driver to work on both
> Zynq and Microblaze Architectures.
> With these modifications drivers/pci/host/pcie-xilinx.c, will
> work on both Zynq and Microblaze Architectures.
> 
> Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com>
> Signed-off-by: Ravi Kiran Gummaluri <rgummal@xilinx.com>
> ---
> Changes:
> Removed unneccessary architecture dependent number of MSI's.
> Added #ifdef to pci_fixup_irqs which is ARM specific API.

Hi Bharat,

Why do you say pci_fixup_irqs is ARM-specific? It's declared in
include/linux/pci.h, defined in drivers/pci/setup-irq.c & used by
multiple architectures (alpha, arm, m68k, mips, sh, sparc, tile,
unicore32 from a quick grep).

Will you not break INTX-style interrupts by removing this?

Thanks,
    Paul

> ---
>  drivers/pci/host/pcie-xilinx.c | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/drivers/pci/host/pcie-xilinx.c b/drivers/pci/host/pcie-xilinx.c
> index 13fec35..6cbce34 100644
> --- a/drivers/pci/host/pcie-xilinx.c
> +++ b/drivers/pci/host/pcie-xilinx.c
> @@ -704,7 +704,9 @@ static int xilinx_pcie_probe(struct platform_device *pdev)
>  #endif
>  	pci_scan_child_bus(bus);
>  	pci_assign_unassigned_bus_resources(bus);
> +#ifdef CONFIG_ARM
>  	pci_fixup_irqs(pci_common_swizzle, of_irq_parse_and_map_pci);
> +#endif
>  	pci_bus_add_devices(bus);
>  	platform_set_drvdata(pdev, port);
>  
> -- 
> 2.1.1
> 

[PATCH V3 3/5] PCI: xilinx: Modifying AXI PCIe Host Bridge driver to work on both Zynq and Microblaze

[Paul Burton]

On Tue, Feb 09, 2016 at 04:11:56PM +0530, Bharat Kumar Gogada wrote:
> Modifying Xilinx AXI PCIe Host Bridge Soft IP driver to work on both
> Zynq and Microblaze Architectures.
> With these modifications drivers/pci/host/pcie-xilinx.c, will
> work on both Zynq and Microblaze Architectures.
> 
> Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com>
> Signed-off-by: Ravi Kiran Gummaluri <rgummal@xilinx.com>
> ---
> Changes:
> Removed unneccessary architecture dependent number of MSI's.
> Added #ifdef to pci_fixup_irqs which is ARM specific API.

Hi Bharat,

Why do you say pci_fixup_irqs is ARM-specific? It's declared in
include/linux/pci.h, defined in drivers/pci/setup-irq.c & used by
multiple architectures (alpha, arm, m68k, mips, sh, sparc, tile,
unicore32 from a quick grep).

Will you not break INTX-style interrupts by removing this?

Thanks,
    Paul

> ---
>  drivers/pci/host/pcie-xilinx.c | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/drivers/pci/host/pcie-xilinx.c b/drivers/pci/host/pcie-xilinx.c
> index 13fec35..6cbce34 100644
> --- a/drivers/pci/host/pcie-xilinx.c
> +++ b/drivers/pci/host/pcie-xilinx.c
> @@ -704,7 +704,9 @@ static int xilinx_pcie_probe(struct platform_device *pdev)
>  #endif
>  	pci_scan_child_bus(bus);
>  	pci_assign_unassigned_bus_resources(bus);
> +#ifdef CONFIG_ARM
>  	pci_fixup_irqs(pci_common_swizzle, of_irq_parse_and_map_pci);
> +#endif
>  	pci_bus_add_devices(bus);
>  	platform_set_drvdata(pdev, port);
>  
> -- 
> 2.1.1
> 

RE: [PATCH V3 3/5] PCI: xilinx: Modifying AXI PCIe Host Bridge driver to work on both Zynq and Microblaze

[Bharat Kumar Gogada]

> On Tue, Feb 09, 2016 at 04:11:56PM +0530, Bharat Kumar Gogada wrote:
> > Modifying Xilinx AXI PCIe Host Bridge Soft IP driver to work on both
> > Zynq and Microblaze Architectures.
> > With these modifications drivers/pci/host/pcie-xilinx.c, will work on
> > both Zynq and Microblaze Architectures.
> >
> > Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com>
> > Signed-off-by: Ravi Kiran Gummaluri <rgummal@xilinx.com>
> > ---
> > Changes:
> > Removed unneccessary architecture dependent number of MSI's.
> > Added #ifdef to pci_fixup_irqs which is ARM specific API.
> 
> Hi Bharat,
> 
> Why do you say pci_fixup_irqs is ARM-specific? It's declared in
> include/linux/pci.h, defined in drivers/pci/setup-irq.c & used by multiple
> architectures (alpha, arm, m68k, mips, sh, sparc, tile,
> unicore32 from a quick grep).
> 
> Will you not break INTX-style interrupts by removing this?
> 
I meant to say ARM specific w.r.t Microblaze architecture, which is what this patch series are for. This has been already discussed in my previous patch by  Arnd Bergmann and Lorenzo Pieralisi . (https://lkml.org/lkml/2016/1/12/707)

Bharat

RE: [PATCH V3 3/5] PCI: xilinx: Modifying AXI PCIe Host Bridge driver to work on both Zynq and Microblaze

[Bharat Kumar Gogada]

> On Tue, Feb 09, 2016 at 04:11:56PM +0530, Bharat Kumar Gogada wrote:
> > Modifying Xilinx AXI PCIe Host Bridge Soft IP driver to work on both
> > Zynq and Microblaze Architectures.
> > With these modifications drivers/pci/host/pcie-xilinx.c, will work on
> > both Zynq and Microblaze Architectures.
> >
> > Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com>
> > Signed-off-by: Ravi Kiran Gummaluri <rgummal@xilinx.com>
> > ---
> > Changes:
> > Removed unneccessary architecture dependent number of MSI's.
> > Added #ifdef to pci_fixup_irqs which is ARM specific API.
> 
> Hi Bharat,
> 
> Why do you say pci_fixup_irqs is ARM-specific? It's declared in
> include/linux/pci.h, defined in drivers/pci/setup-irq.c & used by multiple
> architectures (alpha, arm, m68k, mips, sh, sparc, tile,
> unicore32 from a quick grep).
> 
> Will you not break INTX-style interrupts by removing this?
> 
I meant to say ARM specific w.r.t Microblaze architecture, which is what this patch series are for. This has been already discussed in my previous patch by  Arnd Bergmann and Lorenzo Pieralisi . (https://lkml.org/lkml/2016/1/12/707)

Bharat

RE: [PATCH V3 3/5] PCI: xilinx: Modifying AXI PCIe Host Bridge driver to work on both Zynq and Microblaze

[Bharat Kumar Gogada]
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[PATCH V3 3/5] PCI: xilinx: Modifying AXI PCIe Host Bridge driver to work on both Zynq and Microblaze

[Bharat Kumar Gogada]

> On Tue, Feb 09, 2016 at 04:11:56PM +0530, Bharat Kumar Gogada wrote:
> > Modifying Xilinx AXI PCIe Host Bridge Soft IP driver to work on both
> > Zynq and Microblaze Architectures.
> > With these modifications drivers/pci/host/pcie-xilinx.c, will work on
> > both Zynq and Microblaze Architectures.
> >
> > Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com>
> > Signed-off-by: Ravi Kiran Gummaluri <rgummal@xilinx.com>
> > ---
> > Changes:
> > Removed unneccessary architecture dependent number of MSI's.
> > Added #ifdef to pci_fixup_irqs which is ARM specific API.
> 
> Hi Bharat,
> 
> Why do you say pci_fixup_irqs is ARM-specific? It's declared in
> include/linux/pci.h, defined in drivers/pci/setup-irq.c & used by multiple
> architectures (alpha, arm, m68k, mips, sh, sparc, tile,
> unicore32 from a quick grep).
> 
> Will you not break INTX-style interrupts by removing this?
> 
I meant to say ARM specific w.r.t Microblaze architecture, which is what this patch series are for. This has been already discussed in my previous patch by  Arnd Bergmann and Lorenzo Pieralisi . (https://lkml.org/lkml/2016/1/12/707)

Bharat

Re: [PATCH V3 3/5] PCI: xilinx: Modifying AXI PCIe Host Bridge driver to work on both Zynq and Microblaze

[Paul Burton]

On Wed, Feb 10, 2016 at 05:55:51AM +0000, Bharat Kumar Gogada wrote:
> > On Tue, Feb 09, 2016 at 04:11:56PM +0530, Bharat Kumar Gogada wrote:
> > > Modifying Xilinx AXI PCIe Host Bridge Soft IP driver to work on both
> > > Zynq and Microblaze Architectures.
> > > With these modifications drivers/pci/host/pcie-xilinx.c, will work on
> > > both Zynq and Microblaze Architectures.
> > >
> > > Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com>
> > > Signed-off-by: Ravi Kiran Gummaluri <rgummal@xilinx.com>
> > > ---
> > > Changes:
> > > Removed unneccessary architecture dependent number of MSI's.
> > > Added #ifdef to pci_fixup_irqs which is ARM specific API.
> > 
> > Hi Bharat,
> > 
> > Why do you say pci_fixup_irqs is ARM-specific? It's declared in
> > include/linux/pci.h, defined in drivers/pci/setup-irq.c & used by multiple
> > architectures (alpha, arm, m68k, mips, sh, sparc, tile,
> > unicore32 from a quick grep).
> > 
> > Will you not break INTX-style interrupts by removing this?
> > 
> I meant to say ARM specific w.r.t Microblaze architecture, which is
> what this patch series are for. This has been already discussed in my
> previous patch by  Arnd Bergmann and Lorenzo Pieralisi .
> (https://lkml.org/lkml/2016/1/12/707)

Hi Bharat,

Ok, so you don't need it for microblaze but do need it for zynq/ARM. We
also need it for MIPS, where my recent patches enable this driver. So if
#ifdef'ing this is the current way forwards could you please invert the
condition to #ifndef CONFIG_MICROBLAZE?

Thanks,
    Paul

Re: [PATCH V3 3/5] PCI: xilinx: Modifying AXI PCIe Host Bridge driver to work on both Zynq and Microblaze

[Paul Burton]

On Wed, Feb 10, 2016 at 05:55:51AM +0000, Bharat Kumar Gogada wrote:
> > On Tue, Feb 09, 2016 at 04:11:56PM +0530, Bharat Kumar Gogada wrote:
> > > Modifying Xilinx AXI PCIe Host Bridge Soft IP driver to work on both
> > > Zynq and Microblaze Architectures.
> > > With these modifications drivers/pci/host/pcie-xilinx.c, will work on
> > > both Zynq and Microblaze Architectures.
> > >
> > > Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com>
> > > Signed-off-by: Ravi Kiran Gummaluri <rgummal@xilinx.com>
> > > ---
> > > Changes:
> > > Removed unneccessary architecture dependent number of MSI's.
> > > Added #ifdef to pci_fixup_irqs which is ARM specific API.
> > 
> > Hi Bharat,
> > 
> > Why do you say pci_fixup_irqs is ARM-specific? It's declared in
> > include/linux/pci.h, defined in drivers/pci/setup-irq.c & used by multiple
> > architectures (alpha, arm, m68k, mips, sh, sparc, tile,
> > unicore32 from a quick grep).
> > 
> > Will you not break INTX-style interrupts by removing this?
> > 
> I meant to say ARM specific w.r.t Microblaze architecture, which is
> what this patch series are for. This has been already discussed in my
> previous patch by  Arnd Bergmann and Lorenzo Pieralisi .
> (https://lkml.org/lkml/2016/1/12/707)

Hi Bharat,

Ok, so you don't need it for microblaze but do need it for zynq/ARM. We
also need it for MIPS, where my recent patches enable this driver. So if
#ifdef'ing this is the current way forwards could you please invert the
condition to #ifndef CONFIG_MICROBLAZE?

Thanks,
    Paul

Re: [PATCH V3 3/5] PCI: xilinx: Modifying AXI PCIe Host Bridge driver to work on both Zynq and Microblaze

[Paul Burton]

On Wed, Feb 10, 2016 at 05:55:51AM +0000, Bharat Kumar Gogada wrote:
> > On Tue, Feb 09, 2016 at 04:11:56PM +0530, Bharat Kumar Gogada wrote:
> > > Modifying Xilinx AXI PCIe Host Bridge Soft IP driver to work on both
> > > Zynq and Microblaze Architectures.
> > > With these modifications drivers/pci/host/pcie-xilinx.c, will work on
> > > both Zynq and Microblaze Architectures.
> > >
> > > Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com>
> > > Signed-off-by: Ravi Kiran Gummaluri <rgummal@xilinx.com>
> > > ---
> > > Changes:
> > > Removed unneccessary architecture dependent number of MSI's.
> > > Added #ifdef to pci_fixup_irqs which is ARM specific API.
> > 
> > Hi Bharat,
> > 
> > Why do you say pci_fixup_irqs is ARM-specific? It's declared in
> > include/linux/pci.h, defined in drivers/pci/setup-irq.c & used by multiple
> > architectures (alpha, arm, m68k, mips, sh, sparc, tile,
> > unicore32 from a quick grep).
> > 
> > Will you not break INTX-style interrupts by removing this?
> > 
> I meant to say ARM specific w.r.t Microblaze architecture, which is
> what this patch series are for. This has been already discussed in my
> previous patch by  Arnd Bergmann and Lorenzo Pieralisi .
> (https://lkml.org/lkml/2016/1/12/707)

Hi Bharat,

Ok, so you don't need it for microblaze but do need it for zynq/ARM. We
also need it for MIPS, where my recent patches enable this driver. So if
#ifdef'ing this is the current way forwards could you please invert the
condition to #ifndef CONFIG_MICROBLAZE?

Thanks,
    Paul

[PATCH V3 3/5] PCI: xilinx: Modifying AXI PCIe Host Bridge driver to work on both Zynq and Microblaze

[Paul Burton]

On Wed, Feb 10, 2016 at 05:55:51AM +0000, Bharat Kumar Gogada wrote:
> > On Tue, Feb 09, 2016 at 04:11:56PM +0530, Bharat Kumar Gogada wrote:
> > > Modifying Xilinx AXI PCIe Host Bridge Soft IP driver to work on both
> > > Zynq and Microblaze Architectures.
> > > With these modifications drivers/pci/host/pcie-xilinx.c, will work on
> > > both Zynq and Microblaze Architectures.
> > >
> > > Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com>
> > > Signed-off-by: Ravi Kiran Gummaluri <rgummal@xilinx.com>
> > > ---
> > > Changes:
> > > Removed unneccessary architecture dependent number of MSI's.
> > > Added #ifdef to pci_fixup_irqs which is ARM specific API.
> > 
> > Hi Bharat,
> > 
> > Why do you say pci_fixup_irqs is ARM-specific? It's declared in
> > include/linux/pci.h, defined in drivers/pci/setup-irq.c & used by multiple
> > architectures (alpha, arm, m68k, mips, sh, sparc, tile,
> > unicore32 from a quick grep).
> > 
> > Will you not break INTX-style interrupts by removing this?
> > 
> I meant to say ARM specific w.r.t Microblaze architecture, which is
> what this patch series are for. This has been already discussed in my
> previous patch by  Arnd Bergmann and Lorenzo Pieralisi .
> (https://lkml.org/lkml/2016/1/12/707)

Hi Bharat,

Ok, so you don't need it for microblaze but do need it for zynq/ARM. We
also need it for MIPS, where my recent patches enable this driver. So if
#ifdef'ing this is the current way forwards could you please invert the
condition to #ifndef CONFIG_MICROBLAZE?

Thanks,
    Paul

Re: [PATCH V3 3/5] PCI: xilinx: Modifying AXI PCIe Host Bridge driver to work on both Zynq and Microblaze

[Arnd Bergmann]

On Wednesday 10 February 2016 09:27:07 Paul Burton wrote:
> On Wed, Feb 10, 2016 at 05:55:51AM +0000, Bharat Kumar Gogada wrote:
> > > On Tue, Feb 09, 2016 at 04:11:56PM +0530, Bharat Kumar Gogada wrote:
> > > > Modifying Xilinx AXI PCIe Host Bridge Soft IP driver to work on both
> > > > Zynq and Microblaze Architectures.
> > > > With these modifications drivers/pci/host/pcie-xilinx.c, will work on
> > > > both Zynq and Microblaze Architectures.
> > > >
> > > > Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com>
> > > > Signed-off-by: Ravi Kiran Gummaluri <rgummal@xilinx.com>
> > > > ---
> > > > Changes:
> > > > Removed unneccessary architecture dependent number of MSI's.
> > > > Added #ifdef to pci_fixup_irqs which is ARM specific API.
> > > 
> > > Hi Bharat,
> > > 
> > > Why do you say pci_fixup_irqs is ARM-specific? It's declared in
> > > include/linux/pci.h, defined in drivers/pci/setup-irq.c & used by multiple
> > > architectures (alpha, arm, m68k, mips, sh, sparc, tile,
> > > unicore32 from a quick grep).
> > > 
> > > Will you not break INTX-style interrupts by removing this?
> > > 
> > I meant to say ARM specific w.r.t Microblaze architecture, which is
> > what this patch series are for. This has been already discussed in my
> > previous patch by  Arnd Bergmann and Lorenzo Pieralisi .
> > (https://lkml.org/lkml/2016/1/12/707)
> 
> Hi Bharat,
> 
> Ok, so you don't need it for microblaze but do need it for zynq/ARM. We
> also need it for MIPS, where my recent patches enable this driver. So if
> #ifdef'ing this is the current way forwards could you please invert the
> condition to #ifndef CONFIG_MICROBLAZE?

I think we are getting to the point where we should try much harder
to make sure nobody needs that hack and it all works out of the box.

	Arnd

Re: [PATCH V3 3/5] PCI: xilinx: Modifying AXI PCIe Host Bridge driver to work on both Zynq and Microblaze

[Arnd Bergmann]

On Wednesday 10 February 2016 09:27:07 Paul Burton wrote:
> On Wed, Feb 10, 2016 at 05:55:51AM +0000, Bharat Kumar Gogada wrote:
> > > On Tue, Feb 09, 2016 at 04:11:56PM +0530, Bharat Kumar Gogada wrote:
> > > > Modifying Xilinx AXI PCIe Host Bridge Soft IP driver to work on both
> > > > Zynq and Microblaze Architectures.
> > > > With these modifications drivers/pci/host/pcie-xilinx.c, will work on
> > > > both Zynq and Microblaze Architectures.
> > > >
> > > > Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com>
> > > > Signed-off-by: Ravi Kiran Gummaluri <rgummal@xilinx.com>
> > > > ---
> > > > Changes:
> > > > Removed unneccessary architecture dependent number of MSI's.
> > > > Added #ifdef to pci_fixup_irqs which is ARM specific API.
> > > 
> > > Hi Bharat,
> > > 
> > > Why do you say pci_fixup_irqs is ARM-specific? It's declared in
> > > include/linux/pci.h, defined in drivers/pci/setup-irq.c & used by multiple
> > > architectures (alpha, arm, m68k, mips, sh, sparc, tile,
> > > unicore32 from a quick grep).
> > > 
> > > Will you not break INTX-style interrupts by removing this?
> > > 
> > I meant to say ARM specific w.r.t Microblaze architecture, which is
> > what this patch series are for. This has been already discussed in my
> > previous patch by  Arnd Bergmann and Lorenzo Pieralisi .
> > (https://lkml.org/lkml/2016/1/12/707)
> 
> Hi Bharat,
> 
> Ok, so you don't need it for microblaze but do need it for zynq/ARM. We
> also need it for MIPS, where my recent patches enable this driver. So if
> #ifdef'ing this is the current way forwards could you please invert the
> condition to #ifndef CONFIG_MICROBLAZE?

I think we are getting to the point where we should try much harder
to make sure nobody needs that hack and it all works out of the box.

	Arnd

Re: [PATCH V3 3/5] PCI: xilinx: Modifying AXI PCIe Host Bridge driver to work on both Zynq and Microblaze

[Arnd Bergmann]

On Wednesday 10 February 2016 09:27:07 Paul Burton wrote:
> On Wed, Feb 10, 2016 at 05:55:51AM +0000, Bharat Kumar Gogada wrote:
> > > On Tue, Feb 09, 2016 at 04:11:56PM +0530, Bharat Kumar Gogada wrote:
> > > > Modifying Xilinx AXI PCIe Host Bridge Soft IP driver to work on both
> > > > Zynq and Microblaze Architectures.
> > > > With these modifications drivers/pci/host/pcie-xilinx.c, will work on
> > > > both Zynq and Microblaze Architectures.
> > > >
> > > > Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com>
> > > > Signed-off-by: Ravi Kiran Gummaluri <rgummal@xilinx.com>
> > > > ---
> > > > Changes:
> > > > Removed unneccessary architecture dependent number of MSI's.
> > > > Added #ifdef to pci_fixup_irqs which is ARM specific API.
> > > 
> > > Hi Bharat,
> > > 
> > > Why do you say pci_fixup_irqs is ARM-specific? It's declared in
> > > include/linux/pci.h, defined in drivers/pci/setup-irq.c & used by multiple
> > > architectures (alpha, arm, m68k, mips, sh, sparc, tile,
> > > unicore32 from a quick grep).
> > > 
> > > Will you not break INTX-style interrupts by removing this?
> > > 
> > I meant to say ARM specific w.r.t Microblaze architecture, which is
> > what this patch series are for. This has been already discussed in my
> > previous patch by  Arnd Bergmann and Lorenzo Pieralisi .
> > (https://lkml.org/lkml/2016/1/12/707)
> 
> Hi Bharat,
> 
> Ok, so you don't need it for microblaze but do need it for zynq/ARM. We
> also need it for MIPS, where my recent patches enable this driver. So if
> #ifdef'ing this is the current way forwards could you please invert the
> condition to #ifndef CONFIG_MICROBLAZE?

I think we are getting to the point where we should try much harder
to make sure nobody needs that hack and it all works out of the box.

	Arnd

[PATCH V3 3/5] PCI: xilinx: Modifying AXI PCIe Host Bridge driver to work on both Zynq and Microblaze

[Arnd Bergmann]

On Wednesday 10 February 2016 09:27:07 Paul Burton wrote:
> On Wed, Feb 10, 2016 at 05:55:51AM +0000, Bharat Kumar Gogada wrote:
> > > On Tue, Feb 09, 2016 at 04:11:56PM +0530, Bharat Kumar Gogada wrote:
> > > > Modifying Xilinx AXI PCIe Host Bridge Soft IP driver to work on both
> > > > Zynq and Microblaze Architectures.
> > > > With these modifications drivers/pci/host/pcie-xilinx.c, will work on
> > > > both Zynq and Microblaze Architectures.
> > > >
> > > > Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com>
> > > > Signed-off-by: Ravi Kiran Gummaluri <rgummal@xilinx.com>
> > > > ---
> > > > Changes:
> > > > Removed unneccessary architecture dependent number of MSI's.
> > > > Added #ifdef to pci_fixup_irqs which is ARM specific API.
> > > 
> > > Hi Bharat,
> > > 
> > > Why do you say pci_fixup_irqs is ARM-specific? It's declared in
> > > include/linux/pci.h, defined in drivers/pci/setup-irq.c & used by multiple
> > > architectures (alpha, arm, m68k, mips, sh, sparc, tile,
> > > unicore32 from a quick grep).
> > > 
> > > Will you not break INTX-style interrupts by removing this?
> > > 
> > I meant to say ARM specific w.r.t Microblaze architecture, which is
> > what this patch series are for. This has been already discussed in my
> > previous patch by  Arnd Bergmann and Lorenzo Pieralisi .
> > (https://lkml.org/lkml/2016/1/12/707)
> 
> Hi Bharat,
> 
> Ok, so you don't need it for microblaze but do need it for zynq/ARM. We
> also need it for MIPS, where my recent patches enable this driver. So if
> #ifdef'ing this is the current way forwards could you please invert the
> condition to #ifndef CONFIG_MICROBLAZE?

I think we are getting to the point where we should try much harder
to make sure nobody needs that hack and it all works out of the box.

	Arnd

RE: [PATCH V3 3/5] PCI: xilinx: Modifying AXI PCIe Host Bridge driver to work on both Zynq and Microblaze

[Bharat Kumar Gogada]

> Subject: Re: [PATCH V3 3/5] PCI: xilinx: Modifying AXI PCIe Host Bridge driver
> to work on both Zynq and Microblaze
> 
> On Wednesday 10 February 2016 09:27:07 Paul Burton wrote:
> > On Wed, Feb 10, 2016 at 05:55:51AM +0000, Bharat Kumar Gogada wrote:
> > > > On Tue, Feb 09, 2016 at 04:11:56PM +0530, Bharat Kumar Gogada
> wrote:
> > > > > Modifying Xilinx AXI PCIe Host Bridge Soft IP driver to work on
> > > > > both Zynq and Microblaze Architectures.
> > > > > With these modifications drivers/pci/host/pcie-xilinx.c, will
> > > > > work on both Zynq and Microblaze Architectures.
> > > > >
> > > > > Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com>
> > > > > Signed-off-by: Ravi Kiran Gummaluri <rgummal@xilinx.com>
> > > > > ---
> > > > > Changes:
> > > > > Removed unneccessary architecture dependent number of MSI's.
> > > > > Added #ifdef to pci_fixup_irqs which is ARM specific API.
> > > >
> > > > Hi Bharat,
> > > >
> > > > Why do you say pci_fixup_irqs is ARM-specific? It's declared in
> > > > include/linux/pci.h, defined in drivers/pci/setup-irq.c & used by
> > > > multiple architectures (alpha, arm, m68k, mips, sh, sparc, tile,
> > > > unicore32 from a quick grep).
> > > >
> > > > Will you not break INTX-style interrupts by removing this?
> > > >
> > > I meant to say ARM specific w.r.t Microblaze architecture, which is
> > > what this patch series are for. This has been already discussed in
> > > my previous patch by  Arnd Bergmann and Lorenzo Pieralisi .
> > > (https://lkml.org/lkml/2016/1/12/707)
> >
> > Hi Bharat,
> >
> > Ok, so you don't need it for microblaze but do need it for zynq/ARM.
> > We also need it for MIPS, where my recent patches enable this driver.
> > So if #ifdef'ing this is the current way forwards could you please
> > invert the condition to #ifndef CONFIG_MICROBLAZE?
> 
> I think we are getting to the point where we should try much harder to make
> sure nobody needs that hack and it all works out of the box.

Ok I will invert to this condition and resend the patches.

Bharat

RE: [PATCH V3 3/5] PCI: xilinx: Modifying AXI PCIe Host Bridge driver to work on both Zynq and Microblaze

[Bharat Kumar Gogada]

> Subject: Re: [PATCH V3 3/5] PCI: xilinx: Modifying AXI PCIe Host Bridge driver
> to work on both Zynq and Microblaze
> 
> On Wednesday 10 February 2016 09:27:07 Paul Burton wrote:
> > On Wed, Feb 10, 2016 at 05:55:51AM +0000, Bharat Kumar Gogada wrote:
> > > > On Tue, Feb 09, 2016 at 04:11:56PM +0530, Bharat Kumar Gogada
> wrote:
> > > > > Modifying Xilinx AXI PCIe Host Bridge Soft IP driver to work on
> > > > > both Zynq and Microblaze Architectures.
> > > > > With these modifications drivers/pci/host/pcie-xilinx.c, will
> > > > > work on both Zynq and Microblaze Architectures.
> > > > >
> > > > > Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com>
> > > > > Signed-off-by: Ravi Kiran Gummaluri <rgummal@xilinx.com>
> > > > > ---
> > > > > Changes:
> > > > > Removed unneccessary architecture dependent number of MSI's.
> > > > > Added #ifdef to pci_fixup_irqs which is ARM specific API.
> > > >
> > > > Hi Bharat,
> > > >
> > > > Why do you say pci_fixup_irqs is ARM-specific? It's declared in
> > > > include/linux/pci.h, defined in drivers/pci/setup-irq.c & used by
> > > > multiple architectures (alpha, arm, m68k, mips, sh, sparc, tile,
> > > > unicore32 from a quick grep).
> > > >
> > > > Will you not break INTX-style interrupts by removing this?
> > > >
> > > I meant to say ARM specific w.r.t Microblaze architecture, which is
> > > what this patch series are for. This has been already discussed in
> > > my previous patch by  Arnd Bergmann and Lorenzo Pieralisi .
> > > (https://lkml.org/lkml/2016/1/12/707)
> >
> > Hi Bharat,
> >
> > Ok, so you don't need it for microblaze but do need it for zynq/ARM.
> > We also need it for MIPS, where my recent patches enable this driver.
> > So if #ifdef'ing this is the current way forwards could you please
> > invert the condition to #ifndef CONFIG_MICROBLAZE?
> 
> I think we are getting to the point where we should try much harder to make
> sure nobody needs that hack and it all works out of the box.

Ok I will invert to this condition and resend the patches.

Bharat

RE: [PATCH V3 3/5] PCI: xilinx: Modifying AXI PCIe Host Bridge driver to work on both Zynq and Microblaze

[Bharat Kumar Gogada]

> Subject: Re: [PATCH V3 3/5] PCI: xilinx: Modifying AXI PCIe Host Bridge driver
> to work on both Zynq and Microblaze
> 
> On Wednesday 10 February 2016 09:27:07 Paul Burton wrote:
> > On Wed, Feb 10, 2016 at 05:55:51AM +0000, Bharat Kumar Gogada wrote:
> > > > On Tue, Feb 09, 2016 at 04:11:56PM +0530, Bharat Kumar Gogada
> wrote:
> > > > > Modifying Xilinx AXI PCIe Host Bridge Soft IP driver to work on
> > > > > both Zynq and Microblaze Architectures.
> > > > > With these modifications drivers/pci/host/pcie-xilinx.c, will
> > > > > work on both Zynq and Microblaze Architectures.
> > > > >
> > > > > Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com>
> > > > > Signed-off-by: Ravi Kiran Gummaluri <rgummal@xilinx.com>
> > > > > ---
> > > > > Changes:
> > > > > Removed unneccessary architecture dependent number of MSI's.
> > > > > Added #ifdef to pci_fixup_irqs which is ARM specific API.
> > > >
> > > > Hi Bharat,
> > > >
> > > > Why do you say pci_fixup_irqs is ARM-specific? It's declared in
> > > > include/linux/pci.h, defined in drivers/pci/setup-irq.c & used by
> > > > multiple architectures (alpha, arm, m68k, mips, sh, sparc, tile,
> > > > unicore32 from a quick grep).
> > > >
> > > > Will you not break INTX-style interrupts by removing this?
> > > >
> > > I meant to say ARM specific w.r.t Microblaze architecture, which is
> > > what this patch series are for. This has been already discussed in
> > > my previous patch by  Arnd Bergmann and Lorenzo Pieralisi .
> > > (https://lkml.org/lkml/2016/1/12/707)
> >
> > Hi Bharat,
> >
> > Ok, so you don't need it for microblaze but do need it for zynq/ARM.
> > We also need it for MIPS, where my recent patches enable this driver.
> > So if #ifdef'ing this is the current way forwards could you please
> > invert the condition to #ifndef CONFIG_MICROBLAZE?
> 
> I think we are getting to the point where we should try much harder to make
> sure nobody needs that hack and it all works out of the box.

Ok I will invert to this condition and resend the patches.

Bharat

[PATCH V3 3/5] PCI: xilinx: Modifying AXI PCIe Host Bridge driver to work on both Zynq and Microblaze

[Bharat Kumar Gogada]

> Subject: Re: [PATCH V3 3/5] PCI: xilinx: Modifying AXI PCIe Host Bridge driver
> to work on both Zynq and Microblaze
> 
> On Wednesday 10 February 2016 09:27:07 Paul Burton wrote:
> > On Wed, Feb 10, 2016 at 05:55:51AM +0000, Bharat Kumar Gogada wrote:
> > > > On Tue, Feb 09, 2016 at 04:11:56PM +0530, Bharat Kumar Gogada
> wrote:
> > > > > Modifying Xilinx AXI PCIe Host Bridge Soft IP driver to work on
> > > > > both Zynq and Microblaze Architectures.
> > > > > With these modifications drivers/pci/host/pcie-xilinx.c, will
> > > > > work on both Zynq and Microblaze Architectures.
> > > > >
> > > > > Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com>
> > > > > Signed-off-by: Ravi Kiran Gummaluri <rgummal@xilinx.com>
> > > > > ---
> > > > > Changes:
> > > > > Removed unneccessary architecture dependent number of MSI's.
> > > > > Added #ifdef to pci_fixup_irqs which is ARM specific API.
> > > >
> > > > Hi Bharat,
> > > >
> > > > Why do you say pci_fixup_irqs is ARM-specific? It's declared in
> > > > include/linux/pci.h, defined in drivers/pci/setup-irq.c & used by
> > > > multiple architectures (alpha, arm, m68k, mips, sh, sparc, tile,
> > > > unicore32 from a quick grep).
> > > >
> > > > Will you not break INTX-style interrupts by removing this?
> > > >
> > > I meant to say ARM specific w.r.t Microblaze architecture, which is
> > > what this patch series are for. This has been already discussed in
> > > my previous patch by  Arnd Bergmann and Lorenzo Pieralisi .
> > > (https://lkml.org/lkml/2016/1/12/707)
> >
> > Hi Bharat,
> >
> > Ok, so you don't need it for microblaze but do need it for zynq/ARM.
> > We also need it for MIPS, where my recent patches enable this driver.
> > So if #ifdef'ing this is the current way forwards could you please
> > invert the condition to #ifndef CONFIG_MICROBLAZE?
> 
> I think we are getting to the point where we should try much harder to make
> sure nobody needs that hack and it all works out of the box.

Ok I will invert to this condition and resend the patches.

Bharat