On Fri, 2016-01-29 at 23:11 +0100, John Holland wrote: > The Intel i211 LOM pcie ethernet controllers' iNVM operates as an > OTP  > and has no externel EEPROM interface [1]. The following allows the  > driver to pickup the MAC address from a device tree blob when > CONFIG_OF  > has been enabled. > > [1]  > http://www.intel.com/content/www/us/en/embedded/products/networking/i > 211-ethernet-controller-datasheet.html > > Signed-off-by: John Holland > --- >   drivers/net/ethernet/intel/igb/igb_main.c | 30  > ++++++++++++++++++++++++++++++ >   1 file changed, 30 insertions(+) > > diff --git a/drivers/net/ethernet/intel/igb/igb_main.c  > b/drivers/net/ethernet/intel/igb/igb_main.c > index 31e5f39..9c92443 100644 > --- a/drivers/net/ethernet/intel/igb/igb_main.c > +++ b/drivers/net/ethernet/intel/igb/igb_main.c > @@ -56,6 +56,11 @@ >   #include >   #include "igb.h" > > +#ifdef defined(CONFIG_OF) > +#include > +#include > +#endif > + >   #define MAJ 5 >   #define MIN 3 >   #define BUILD 0 > @@ -2217,6 +2222,26 @@ static s32 igb_init_i2c(struct igb_adapter > *adapter) >   } > >   /** > + *  igb_read_mac_addr_dts - Read mac addres from the device tree > blob. Address is mis-spelled above > + *  @hw: pointer to the e1000 hardware structure > + **/ > +#ifdef defined(CONFIG_OF) Minor nitpick, you should have the function comment header wrapped in the #ifdef as well. > +static void igb_read_mac_addr_dts(struct e1000_hw *hw) > +{ > +       const u8 *mac; > +       struct device_node *dn; > + > +       dn = of_find_compatible_node(NULL, NULL, "intel,i211"); > +       if (!dn) > +               return; > + > +       mac = of_get_mac_address(dn); > +       if (mac) > +               ether_addr_copy(hw->mac.addr, mac); > +} > +#endif > + > +/** >    *  igb_probe - Device Initialization Routine >    *  @pdev: PCI device information struct >    *  @ent: entry in igb_pci_tbl > @@ -2420,6 +2445,11 @@ static int igb_probe(struct pci_dev *pdev, > const  > struct pci_device_id *ent) >          if (hw->mac.ops.read_mac_addr(hw)) >                  dev_err(&pdev->dev, "NVM Read Error\n"); > > +#ifdef defined(CONFIG_OF) > +       if (!is_valid_ether_addr(hw->mac.addr)) > +               igb_read_mac_addr_dts(hw); > +#endif > + >          memcpy(netdev->dev_addr, hw->mac.addr, netdev->addr_len); > >          if (!is_valid_ether_addr(netdev->dev_addr)) { > _______________________________________________ > Intel-wired-lan mailing list > Intel-wired-lan@lists.osuosl.org > http://lists.osuosl.org/mailman/listinfo/intel-wired-lan