From mboxrd@z Thu Jan 1 00:00:00 1970 From: Laxman Dewangan Subject: [PATCH V8 0/8] Add support for MAXIM MAX77620/MAX20024 PMIC Date: Thu, 11 Feb 2016 17:26:26 +0530 Message-ID: <1455191794-6065-1-git-send-email-ldewangan@nvidia.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: Sender: linux-kernel-owner@vger.kernel.org To: robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com, ijc+devicetree@hellion.org.uk, galak@codeaurora.org, linus.walleij@linaro.org, gnurou@gmail.com, lee.jones@linaro.org, broonie@kernel.org, a.zummo@towertech.it, alexandre.belloni@free-electrons.com Cc: lgirdwood@gmail.com, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org, rtc-linux@googlegroups.com, swarren@nvidia.com, treding@nvidia.com, k.kozlowski@samsung.com, Laxman Dewangan List-Id: linux-gpio@vger.kernel.org Add SW support for MAXIM Semiconductor's Power Management IC (PMIC) MAX77620/MAX20024. This PMIC supports DC-DC/LDOS, GPIOs, RTC, watchdog, clocks etc. This series add respective driver for each of sub-modules. --- Changes from V1: DT DOC: - Added units in some of properties. - Change the boolean property to tristate type and detail some of properties. RTC: - Rename the file to rtc-max77xxx.c and make the generic implementation. - Direct regmap apis are used for the register access. - Decouped from max77620 driver. - Taken care of cleanup comments form V1 version. MFD: - Code cleanups per review from V1. - Move register access APIs from header to c file. - Remove some of non required variable, remove duplication in error message and simplify some of function implementation. GPIO: - Use the gpiochip_add_data and get the chip data from core APIs. - Cleanups based on comment received on mfd/rtc. - Avoid duplication on error message. Pinctrl: - Cleanup code based on comment received on mfd/rtc. - Avoid duplication on error message. Regulators: - Cleanup code based on comment received on mfd/rtc. - Avoid duplication on error message. - Taken care of review comment from Mark. Changes from V2: - Run coccicheck and checkpatch in strict mode for the alignment. - Drop RTC driver and its i2c client registartion. - Refactor Regulator driver to use core API for DT parsing. Changes from V3: - Change all sys initcall to module driver. - change the max77620_read argument to unisgned int from u8. Changes from V4: - Provide more details in the dt binding doc. - Take care of fps nodes. - Split the submodule's DT binding doc on respective folder. - Drop the battery charger and low battery binding and related code as it need to go on power driver. Changes from V5: - None Changes from V6: - Taken care of Lee's comment like used defines for irqs, remove max77620 register accesss abstractions, remove DTof module and use ID table only, reduce the copyright lines. - Drop configuration for hard power off time chnage as it will be in power driver. - Taken care of Mark's comment about the active discharge. Currently drop this configuration and follow up patches to move this to core and add callback apis are planned. - Use direct regmap from all drivers instead of using abstractions. - move regulator supply to device node instead of regulators sub node. Changes from V7: - Used mfd defines, better describe the FPS sequence properties. Laxman Dewangan (8): mfd: add device-tree binding doc for PMIC max77620/max20024 mfd: max77620: add core driver for MAX77620/MAX20024 pinctrl: add DT binding doc for pincontrol of PMIC max77620/max20024 pinctrl: max77620: add pincontrol driver for MAX77620/MAX20024 gpio: add DT binding doc for gpio of PMIC max77620/max20024 gpio: max77620: add gpio driver for MAX77620/MAX20024 regulator: add DT binding doc for regulator of PMIC max77620/max20024 regulator: max77620: add regulator driver for max77620/max20024 .../devicetree/bindings/gpio/gpio-max77620.txt | 25 + Documentation/devicetree/bindings/mfd/max77620.txt | 138 ++++ .../bindings/pinctrl/pinctrl-max77620.txt | 87 +++ .../bindings/regulator/regulator-max77620.txt | 163 ++++ drivers/gpio/Kconfig | 9 + drivers/gpio/Makefile | 1 + drivers/gpio/gpio-max77620.c | 263 +++++++ drivers/mfd/Kconfig | 15 + drivers/mfd/Makefile | 1 + drivers/mfd/max77620.c | 536 +++++++++++++ drivers/pinctrl/Kconfig | 10 + drivers/pinctrl/Makefile | 1 + drivers/pinctrl/pinctrl-max77620.c | 687 +++++++++++++++++ drivers/regulator/Kconfig | 9 + drivers/regulator/Makefile | 1 + drivers/regulator/max77620-regulator.c | 825 +++++++++++++++++++++ include/dt-bindings/mfd/max77620.h | 35 + include/linux/mfd/max77620.h | 338 +++++++++ 18 files changed, 3144 insertions(+) create mode 100644 Documentation/devicetree/bindings/gpio/gpio-max77620.txt create mode 100644 Documentation/devicetree/bindings/mfd/max77620.txt create mode 100644 Documentation/devicetree/bindings/pinctrl/pinctrl-max77620.txt create mode 100644 Documentation/devicetree/bindings/regulator/regulator-max77620.txt create mode 100644 drivers/gpio/gpio-max77620.c create mode 100644 drivers/mfd/max77620.c create mode 100644 drivers/pinctrl/pinctrl-max77620.c create mode 100644 drivers/regulator/max77620-regulator.c create mode 100644 include/dt-bindings/mfd/max77620.h create mode 100644 include/linux/mfd/max77620.h -- 2.1.4 From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751846AbcBKMIf (ORCPT ); Thu, 11 Feb 2016 07:08:35 -0500 Received: from hqemgate14.nvidia.com ([216.228.121.143]:11281 "EHLO hqemgate14.nvidia.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751419AbcBKMIb (ORCPT ); Thu, 11 Feb 2016 07:08:31 -0500 X-PGP-Universal: processed; by hqnvupgp08.nvidia.com on Thu, 11 Feb 2016 04:08:50 -0800 From: Laxman Dewangan To: , , , , , , , , , , CC: , , , , , , , , Laxman Dewangan Subject: [PATCH V8 0/8] Add support for MAXIM MAX77620/MAX20024 PMIC Date: Thu, 11 Feb 2016 17:26:26 +0530 Message-ID: <1455191794-6065-1-git-send-email-ldewangan@nvidia.com> X-Mailer: git-send-email 2.1.4 MIME-Version: 1.0 Content-Type: text/plain Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Add SW support for MAXIM Semiconductor's Power Management IC (PMIC) MAX77620/MAX20024. This PMIC supports DC-DC/LDOS, GPIOs, RTC, watchdog, clocks etc. This series add respective driver for each of sub-modules. --- Changes from V1: DT DOC: - Added units in some of properties. - Change the boolean property to tristate type and detail some of properties. RTC: - Rename the file to rtc-max77xxx.c and make the generic implementation. - Direct regmap apis are used for the register access. - Decouped from max77620 driver. - Taken care of cleanup comments form V1 version. MFD: - Code cleanups per review from V1. - Move register access APIs from header to c file. - Remove some of non required variable, remove duplication in error message and simplify some of function implementation. GPIO: - Use the gpiochip_add_data and get the chip data from core APIs. - Cleanups based on comment received on mfd/rtc. - Avoid duplication on error message. Pinctrl: - Cleanup code based on comment received on mfd/rtc. - Avoid duplication on error message. Regulators: - Cleanup code based on comment received on mfd/rtc. - Avoid duplication on error message. - Taken care of review comment from Mark. Changes from V2: - Run coccicheck and checkpatch in strict mode for the alignment. - Drop RTC driver and its i2c client registartion. - Refactor Regulator driver to use core API for DT parsing. Changes from V3: - Change all sys initcall to module driver. - change the max77620_read argument to unisgned int from u8. Changes from V4: - Provide more details in the dt binding doc. - Take care of fps nodes. - Split the submodule's DT binding doc on respective folder. - Drop the battery charger and low battery binding and related code as it need to go on power driver. Changes from V5: - None Changes from V6: - Taken care of Lee's comment like used defines for irqs, remove max77620 register accesss abstractions, remove DTof module and use ID table only, reduce the copyright lines. - Drop configuration for hard power off time chnage as it will be in power driver. - Taken care of Mark's comment about the active discharge. Currently drop this configuration and follow up patches to move this to core and add callback apis are planned. - Use direct regmap from all drivers instead of using abstractions. - move regulator supply to device node instead of regulators sub node. Changes from V7: - Used mfd defines, better describe the FPS sequence properties. Laxman Dewangan (8): mfd: add device-tree binding doc for PMIC max77620/max20024 mfd: max77620: add core driver for MAX77620/MAX20024 pinctrl: add DT binding doc for pincontrol of PMIC max77620/max20024 pinctrl: max77620: add pincontrol driver for MAX77620/MAX20024 gpio: add DT binding doc for gpio of PMIC max77620/max20024 gpio: max77620: add gpio driver for MAX77620/MAX20024 regulator: add DT binding doc for regulator of PMIC max77620/max20024 regulator: max77620: add regulator driver for max77620/max20024 .../devicetree/bindings/gpio/gpio-max77620.txt | 25 + Documentation/devicetree/bindings/mfd/max77620.txt | 138 ++++ .../bindings/pinctrl/pinctrl-max77620.txt | 87 +++ .../bindings/regulator/regulator-max77620.txt | 163 ++++ drivers/gpio/Kconfig | 9 + drivers/gpio/Makefile | 1 + drivers/gpio/gpio-max77620.c | 263 +++++++ drivers/mfd/Kconfig | 15 + drivers/mfd/Makefile | 1 + drivers/mfd/max77620.c | 536 +++++++++++++ drivers/pinctrl/Kconfig | 10 + drivers/pinctrl/Makefile | 1 + drivers/pinctrl/pinctrl-max77620.c | 687 +++++++++++++++++ drivers/regulator/Kconfig | 9 + drivers/regulator/Makefile | 1 + drivers/regulator/max77620-regulator.c | 825 +++++++++++++++++++++ include/dt-bindings/mfd/max77620.h | 35 + include/linux/mfd/max77620.h | 338 +++++++++ 18 files changed, 3144 insertions(+) create mode 100644 Documentation/devicetree/bindings/gpio/gpio-max77620.txt create mode 100644 Documentation/devicetree/bindings/mfd/max77620.txt create mode 100644 Documentation/devicetree/bindings/pinctrl/pinctrl-max77620.txt create mode 100644 Documentation/devicetree/bindings/regulator/regulator-max77620.txt create mode 100644 drivers/gpio/gpio-max77620.c create mode 100644 drivers/mfd/max77620.c create mode 100644 drivers/pinctrl/pinctrl-max77620.c create mode 100644 drivers/regulator/max77620-regulator.c create mode 100644 include/dt-bindings/mfd/max77620.h create mode 100644 include/linux/mfd/max77620.h -- 2.1.4 From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from hqemgate14.nvidia.com (hqemgate14.nvidia.com. [216.228.121.143]) by gmr-mx.google.com with ESMTPS id tn7si924848pac.1.2016.02.11.04.08.31 for (version=TLS1_2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128); Thu, 11 Feb 2016 04:08:31 -0800 (PST) From: Laxman Dewangan To: , , , , , , , , , , CC: , , , , , , , , Laxman Dewangan Subject: [rtc-linux] [PATCH V8 0/8] Add support for MAXIM MAX77620/MAX20024 PMIC Date: Thu, 11 Feb 2016 17:26:26 +0530 Message-ID: <1455191794-6065-1-git-send-email-ldewangan@nvidia.com> MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Reply-To: rtc-linux@googlegroups.com List-ID: List-Post: , List-Help: , List-Archive: , List-Unsubscribe: , Add SW support for MAXIM Semiconductor's Power Management IC (PMIC) MAX77620/MAX20024. This PMIC supports DC-DC/LDOS, GPIOs, RTC, watchdog, clocks etc. This series add respective driver for each of sub-modules. --- Changes from V1: DT DOC: - Added units in some of properties. - Change the boolean property to tristate type and detail some of properties. RTC: - Rename the file to rtc-max77xxx.c and make the generic implementation. - Direct regmap apis are used for the register access. - Decouped from max77620 driver. - Taken care of cleanup comments form V1 version. MFD: - Code cleanups per review from V1. - Move register access APIs from header to c file. - Remove some of non required variable, remove duplication in error message and simplify some of function implementation. GPIO: - Use the gpiochip_add_data and get the chip data from core APIs. - Cleanups based on comment received on mfd/rtc. - Avoid duplication on error message. Pinctrl: - Cleanup code based on comment received on mfd/rtc. - Avoid duplication on error message. Regulators: - Cleanup code based on comment received on mfd/rtc. - Avoid duplication on error message. - Taken care of review comment from Mark. Changes from V2: - Run coccicheck and checkpatch in strict mode for the alignment. - Drop RTC driver and its i2c client registartion. - Refactor Regulator driver to use core API for DT parsing. Changes from V3: - Change all sys initcall to module driver. - change the max77620_read argument to unisgned int from u8. Changes from V4: - Provide more details in the dt binding doc. - Take care of fps nodes. - Split the submodule's DT binding doc on respective folder. - Drop the battery charger and low battery binding and related code as it need to go on power driver. Changes from V5: - None Changes from V6: - Taken care of Lee's comment like used defines for irqs, remove max77620 register accesss abstractions, remove DTof module and use ID table only, reduce the copyright lines. - Drop configuration for hard power off time chnage as it will be in power driver. - Taken care of Mark's comment about the active discharge. Currently drop this configuration and follow up patches to move this to core and add callback apis are planned. - Use direct regmap from all drivers instead of using abstractions. - move regulator supply to device node instead of regulators sub node. Changes from V7: - Used mfd defines, better describe the FPS sequence properties. Laxman Dewangan (8): mfd: add device-tree binding doc for PMIC max77620/max20024 mfd: max77620: add core driver for MAX77620/MAX20024 pinctrl: add DT binding doc for pincontrol of PMIC max77620/max20024 pinctrl: max77620: add pincontrol driver for MAX77620/MAX20024 gpio: add DT binding doc for gpio of PMIC max77620/max20024 gpio: max77620: add gpio driver for MAX77620/MAX20024 regulator: add DT binding doc for regulator of PMIC max77620/max20024 regulator: max77620: add regulator driver for max77620/max20024 .../devicetree/bindings/gpio/gpio-max77620.txt | 25 + Documentation/devicetree/bindings/mfd/max77620.txt | 138 ++++ .../bindings/pinctrl/pinctrl-max77620.txt | 87 +++ .../bindings/regulator/regulator-max77620.txt | 163 ++++ drivers/gpio/Kconfig | 9 + drivers/gpio/Makefile | 1 + drivers/gpio/gpio-max77620.c | 263 +++++++ drivers/mfd/Kconfig | 15 + drivers/mfd/Makefile | 1 + drivers/mfd/max77620.c | 536 +++++++++++++ drivers/pinctrl/Kconfig | 10 + drivers/pinctrl/Makefile | 1 + drivers/pinctrl/pinctrl-max77620.c | 687 +++++++++++++++++ drivers/regulator/Kconfig | 9 + drivers/regulator/Makefile | 1 + drivers/regulator/max77620-regulator.c | 825 +++++++++++++++++++++ include/dt-bindings/mfd/max77620.h | 35 + include/linux/mfd/max77620.h | 338 +++++++++ 18 files changed, 3144 insertions(+) create mode 100644 Documentation/devicetree/bindings/gpio/gpio-max77620.txt create mode 100644 Documentation/devicetree/bindings/mfd/max77620.txt create mode 100644 Documentation/devicetree/bindings/pinctrl/pinctrl-max77620.txt create mode 100644 Documentation/devicetree/bindings/regulator/regulator-max77620.txt create mode 100644 drivers/gpio/gpio-max77620.c create mode 100644 drivers/mfd/max77620.c create mode 100644 drivers/pinctrl/pinctrl-max77620.c create mode 100644 drivers/regulator/max77620-regulator.c create mode 100644 include/dt-bindings/mfd/max77620.h create mode 100644 include/linux/mfd/max77620.h -- 2.1.4 -- -- You received this message because you are subscribed to "rtc-linux". Membership options at http://groups.google.com/group/rtc-linux . Please read http://groups.google.com/group/rtc-linux/web/checklist before submitting a driver. --- You received this message because you are subscribed to the Google Groups "rtc-linux" group. To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com. For more options, visit https://groups.google.com/d/optout.