All of lore.kernel.org
 help / color / mirror / Atom feed
From: Alexander Aring <aar@pengutronix.de>
To: linux-wpan@vger.kernel.org
Cc: kernel@pengutronix.de, jukka.rissanen@linux.intel.com,
	hannes@stressinduktion.org, stefan@osg.samsung.com,
	mcr@sandelman.ca, werner@almesberger.net,
	Alexander Aring <aar@pengutronix.de>
Subject: [RFC bluetooth-next 13/19] addrconf: add 802.15.4 short addr slaac
Date: Tue, 22 Mar 2016 14:15:09 +0100	[thread overview]
Message-ID: <1458652515-7862-14-git-send-email-aar@pengutronix.de> (raw)
In-Reply-To: <1458652515-7862-1-git-send-email-aar@pengutronix.de>

This patch adds the autoconfiguration if a valid 802.15.4 short address
is available for 802.15.4 6LoWPAN interfaces.

Signed-off-by: Alexander Aring <aar@pengutronix.de>
---
 net/ipv6/addrconf.c | 40 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 40 insertions(+)

diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index 27aed1a..eb3e3fb 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -3058,6 +3058,37 @@ static void ipv6_gen_mode_random_init(struct inet6_dev *idev)
 	s->initialized = true;
 }
 
+#ifdef CONFIG_IEEE802154_6LOWPAN
+static int addrconf_ifid_ieee802154(u8 *eui, struct net_device *dev)
+{
+	struct wpan_dev *wpan_dev = lowpan_802154_dev(dev)->wdev->ieee802154_ptr;
+
+	/* Set short_addr autoconfiguration if short_addr is present only */
+	if (!ieee802154_is_valid_src_short_addr(wpan_dev->short_addr))
+		return -1;
+
+	/* For either address format, all zero addresses MUST NOT be used */
+	if (wpan_dev->pan_id == cpu_to_le16(0x0000) &&
+	    wpan_dev->short_addr == cpu_to_le16(0x0000))
+		return -1;
+
+	/* Alternatively, if no PAN ID is known, 16 zero bits may be used */
+	if (wpan_dev->pan_id == cpu_to_le16(IEEE802154_PAN_ID_BROADCAST))
+		memset(eui, 0, 2);
+	else
+		ieee802154_le16_to_be16(eui, &wpan_dev->pan_id);
+
+	/* The "Universal/Local" (U/L) bit shall be set to zero */
+	eui[0] &= ~2;
+	eui[2] = 0;
+	eui[3] = 0xFF;
+	eui[4] = 0xFE;
+	eui[5] = 0;
+	ieee802154_le16_to_be16(&eui[6], &wpan_dev->short_addr);
+	return 0;
+}
+#endif
+
 static void addrconf_addr_gen(struct inet6_dev *idev, bool prefix_route)
 {
 	struct in6_addr addr;
@@ -3088,6 +3119,15 @@ static void addrconf_addr_gen(struct inet6_dev *idev, bool prefix_route)
 			addrconf_add_linklocal(idev, &addr, 0);
 		else if (prefix_route)
 			addrconf_prefix_route(&addr, 64, idev->dev, 0, 0);
+
+#ifdef CONFIG_IEEE802154_6LOWPAN
+		/* 802.15.4 6LoWPAN short address slaac handling */
+		if (lowpan_is_ll(idev->dev, LOWPAN_LLTYPE_IEEE802154)) {
+			if (addrconf_ifid_ieee802154(addr.s6_addr + 8,
+						     idev->dev) == 0)
+				addrconf_add_linklocal(idev, &addr, 0);
+		}
+#endif
 		break;
 	case IN6_ADDR_GEN_MODE_NONE:
 	default:
-- 
2.7.4


  parent reply	other threads:[~2016-03-22 13:15 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-03-22 13:14 [RFC bluetooth-next 00/19] 6lowpan: l2 neighbour data and short address Alexander Aring
2016-03-22 13:14 ` [RFC bluetooth-next 01/19] ieee802154: cleanups for ieee802154.h Alexander Aring
2016-03-23  9:59   ` Stefan Schmidt
2016-03-22 13:14 ` [RFC bluetooth-next 02/19] ieee802154: add short address helpers Alexander Aring
2016-03-23  9:59   ` Stefan Schmidt
2016-03-22 13:14 ` [RFC bluetooth-next 03/19] nl802154: avoid address change while running lowpan Alexander Aring
2016-03-23  9:59   ` Stefan Schmidt
2016-03-22 13:15 ` [RFC bluetooth-next 04/19] ieee802154: 6lowpan: fix short addr hash Alexander Aring
2016-03-23  9:58   ` Stefan Schmidt
2016-03-22 13:15 ` [RFC bluetooth-next 05/19] 6lowpan: change naming for lowpan private data Alexander Aring
2016-03-22 13:15 ` [RFC bluetooth-next 06/19] 6lowpan: move lowpan_802154_dev to 6lowpan Alexander Aring
2016-03-23 10:08   ` Stefan Schmidt
2016-03-22 13:15 ` [RFC bluetooth-next 07/19] 6lowpan: iphc: rename add lowpan prefix Alexander Aring
2016-03-23 10:09   ` Stefan Schmidt
2016-04-08 17:36     ` Marcel Holtmann
2016-04-11 17:00       ` Stefan Schmidt
2016-03-22 13:15 ` [RFC bluetooth-next 08/19] 6lowpan: iphc: remove unnecessary zero data Alexander Aring
2016-03-22 13:15 ` [RFC bluetooth-next 09/19] 6lowpan: move eui64 uncompress function Alexander Aring
2016-03-22 13:15 ` [RFC bluetooth-next 10/19] 6lowpan: add lowpan_is_ll function Alexander Aring
2016-03-22 13:15 ` [RFC bluetooth-next 11/19] 6lowpan: move mac802154 header Alexander Aring
2016-03-22 13:15 ` [RFC bluetooth-next 12/19] 6lowpan: add private neighbour data Alexander Aring
2016-03-22 13:15 ` Alexander Aring [this message]
2016-03-23 10:50   ` [RFC bluetooth-next 13/19] addrconf: add 802.15.4 short addr slaac Hannes Frederic Sowa
2016-04-05  8:20     ` Alexander Aring
2016-03-22 13:15 ` [RFC bluetooth-next 14/19] ndisc: add addr_len parameter to ndisc_opt_addr_space Alexander Aring
2016-03-22 13:15 ` [RFC bluetooth-next 15/19] ndisc: add addr_len parameter to ndisc_opt_addr_data Alexander Aring
2016-03-22 13:15 ` [RFC bluetooth-next 16/19] ndisc: add addr_len parameter to ndisc_fill_addr_option Alexander Aring
2016-03-22 13:15 ` [RFC bluetooth-next 17/19] ndisc: add short address to ndisc opts parsing Alexander Aring
2016-03-22 13:15 ` [RFC bluetooth-next 18/19] ndisc: add support for short address option Alexander Aring
2016-03-22 13:15 ` [RFC bluetooth-next 19/19] 6lowpan: add support for 802.15.4 short addr handling Alexander Aring

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1458652515-7862-14-git-send-email-aar@pengutronix.de \
    --to=aar@pengutronix.de \
    --cc=hannes@stressinduktion.org \
    --cc=jukka.rissanen@linux.intel.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-wpan@vger.kernel.org \
    --cc=mcr@sandelman.ca \
    --cc=stefan@osg.samsung.com \
    --cc=werner@almesberger.net \
    --subject='Re: [RFC bluetooth-next 13/19] addrconf: add 802.15.4 short addr slaac' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.