All of lore.kernel.org
 help / color / mirror / Atom feed
From: Rasesh Mody <rasesh.mody@qlogic.com>
To: <thomas.monjalon@6wind.com>, <bruce.richardson@intel.com>
Cc: <dev@dpdk.org>, <stephen@networkplumber.org>,
	<ameen.rahman@qlogic.com>, <harish.patil@qlogic.com>,
	<sony.chacko@qlogic.com>, Rasesh Mody <rasesh.mody@qlogic.com>
Subject: [PATCH v5 00/10] qede: Add qede PMD
Date: Thu, 31 Mar 2016 19:15:17 -0700	[thread overview]
Message-ID: <1459476927-21387-1-git-send-email-rasesh.mody@qlogic.com> (raw)

Hi Thomas, Bruce,

The v5 series incorporates the following review comments:
 - move adapter_info logs under debug
 - implement qede_mac_addr_remove()
 - remove unused rc variable in qede_dev_configure()
 - fix indentation in qede_dev_info_get()
 - use c99 style struct init in qede_config_accept_any_vlan()
 - check error in qede_config_rx_mode()
 - update overview.rst since patch didn't apply

The patches are generated and tested against latest dpdk based off of
v16.04-rc2.

These patches are checked using checkpatch.sh with following additional
ignore option:
   options="$options --ignore=BIT_MACRO,CONCATENATED_STRING"

Please apply!

Rasesh Mody (10):
  qede: Add maintainers
  qede: Add documentation
  qede: Add license file
  qede: Add base driver
  qede: Add core driver
  qede: Add L2 support
  qede: Add SRIOV support
  qede: Add attention support
  qede: Add DCBX support
  qede: Enable PMD build

 MAINTAINERS                                 |    7 +
 config/common_base                          |   14 +
 doc/guides/nics/index.rst                   |    1 +
 doc/guides/nics/overview.rst                |   78 +-
 doc/guides/nics/qede.rst                    |  340 +
 drivers/net/Makefile                        |    1 +
 drivers/net/qede/LICENSE.qede_pmd           |   28 +
 drivers/net/qede/Makefile                   |   95 +
 drivers/net/qede/base/bcm_osal.c            |  181 +
 drivers/net/qede/base/bcm_osal.h            |  395 +
 drivers/net/qede/base/common_hsi.h          |  714 ++
 drivers/net/qede/base/ecore.h               |  745 ++
 drivers/net/qede/base/ecore_attn_values.h   |13287 +++++++++++++++++++++++++++
 drivers/net/qede/base/ecore_chain.h         |  724 ++
 drivers/net/qede/base/ecore_cxt.c           | 1961 ++++
 drivers/net/qede/base/ecore_cxt.h           |  157 +
 drivers/net/qede/base/ecore_cxt_api.h       |   79 +
 drivers/net/qede/base/ecore_dcbx.c          |  887 ++
 drivers/net/qede/base/ecore_dcbx.h          |   55 +
 drivers/net/qede/base/ecore_dcbx_api.h      |  160 +
 drivers/net/qede/base/ecore_dev.c           | 3597 ++++++++
 drivers/net/qede/base/ecore_dev_api.h       |  497 +
 drivers/net/qede/base/ecore_gtt_reg_addr.h  |   42 +
 drivers/net/qede/base/ecore_gtt_values.h    |   33 +
 drivers/net/qede/base/ecore_hsi_common.h    | 1912 ++++
 drivers/net/qede/base/ecore_hsi_eth.h       | 1912 ++++
 drivers/net/qede/base/ecore_hsi_tools.h     | 1081 +++
 drivers/net/qede/base/ecore_hw.c            |  910 ++
 drivers/net/qede/base/ecore_hw.h            |  269 +
 drivers/net/qede/base/ecore_hw_defs.h       |   49 +
 drivers/net/qede/base/ecore_init_fw_funcs.c | 1275 +++
 drivers/net/qede/base/ecore_init_fw_funcs.h |  263 +
 drivers/net/qede/base/ecore_init_ops.c      |  599 ++
 drivers/net/qede/base/ecore_init_ops.h      |  103 +
 drivers/net/qede/base/ecore_int.c           | 2225 +++++
 drivers/net/qede/base/ecore_int.h           |  234 +
 drivers/net/qede/base/ecore_int_api.h       |  277 +
 drivers/net/qede/base/ecore_iov_api.h       |  933 ++
 drivers/net/qede/base/ecore_iro.h           |  115 +
 drivers/net/qede/base/ecore_iro_values.h    |   59 +
 drivers/net/qede/base/ecore_l2.c            | 1798 ++++
 drivers/net/qede/base/ecore_l2.h            |  151 +
 drivers/net/qede/base/ecore_l2_api.h        |  401 +
 drivers/net/qede/base/ecore_mcp.c           | 1932 ++++
 drivers/net/qede/base/ecore_mcp.h           |  304 +
 drivers/net/qede/base/ecore_mcp_api.h       |  611 ++
 drivers/net/qede/base/ecore_proto_if.h      |   28 +
 drivers/net/qede/base/ecore_rt_defs.h       |  446 +
 drivers/net/qede/base/ecore_sp_api.h        |   42 +
 drivers/net/qede/base/ecore_sp_commands.c   |  525 ++
 drivers/net/qede/base/ecore_sp_commands.h   |  137 +
 drivers/net/qede/base/ecore_spq.c           |  943 ++
 drivers/net/qede/base/ecore_spq.h           |  284 +
 drivers/net/qede/base/ecore_sriov.c         | 3422 +++++++
 drivers/net/qede/base/ecore_sriov.h         |  390 +
 drivers/net/qede/base/ecore_status.h        |   30 +
 drivers/net/qede/base/ecore_utils.h         |   31 +
 drivers/net/qede/base/ecore_vf.c            | 1322 +++
 drivers/net/qede/base/ecore_vf.h            |  415 +
 drivers/net/qede/base/ecore_vf_api.h        |  186 +
 drivers/net/qede/base/ecore_vfpf_if.h       |  590 ++
 drivers/net/qede/base/eth_common.h          |  526 ++
 drivers/net/qede/base/mcp_public.h          | 1205 +++
 drivers/net/qede/base/nvm_cfg.h             |  919 ++
 drivers/net/qede/base/reg_addr.h            | 1107 +++
 drivers/net/qede/qede_eth_if.c              |  456 +
 drivers/net/qede/qede_eth_if.h              |  174 +
 drivers/net/qede/qede_ethdev.c              | 1008 ++
 drivers/net/qede/qede_ethdev.h              |  159 +
 drivers/net/qede/qede_if.h                  |  164 +
 drivers/net/qede/qede_logs.h                |   93 +
 drivers/net/qede/qede_main.c                |  601 ++
 drivers/net/qede/qede_rxtx.c                | 1359 +++
 drivers/net/qede/qede_rxtx.h                |  187 +
 drivers/net/qede/rte_pmd_qede_version.map   |    4 +
 mk/rte.app.mk                               |    2 +
 scripts/test-build.sh                       |    1 +
 77 files changed, 58208 insertions(+), 39 deletions(-)
 create mode 100644 doc/guides/nics/qede.rst
 create mode 100644 drivers/net/qede/LICENSE.qede_pmd
 create mode 100644 drivers/net/qede/Makefile
 create mode 100644 drivers/net/qede/base/bcm_osal.c
 create mode 100644 drivers/net/qede/base/bcm_osal.h
 create mode 100644 drivers/net/qede/base/common_hsi.h
 create mode 100644 drivers/net/qede/base/ecore.h
 create mode 100644 drivers/net/qede/base/ecore_attn_values.h
 create mode 100644 drivers/net/qede/base/ecore_chain.h
 create mode 100644 drivers/net/qede/base/ecore_cxt.c
 create mode 100644 drivers/net/qede/base/ecore_cxt.h
 create mode 100644 drivers/net/qede/base/ecore_cxt_api.h
 create mode 100644 drivers/net/qede/base/ecore_dcbx.c
 create mode 100644 drivers/net/qede/base/ecore_dcbx.h
 create mode 100644 drivers/net/qede/base/ecore_dcbx_api.h
 create mode 100644 drivers/net/qede/base/ecore_dev.c
 create mode 100644 drivers/net/qede/base/ecore_dev_api.h
 create mode 100644 drivers/net/qede/base/ecore_gtt_reg_addr.h
 create mode 100644 drivers/net/qede/base/ecore_gtt_values.h
 create mode 100644 drivers/net/qede/base/ecore_hsi_common.h
 create mode 100644 drivers/net/qede/base/ecore_hsi_eth.h
 create mode 100644 drivers/net/qede/base/ecore_hsi_tools.h
 create mode 100644 drivers/net/qede/base/ecore_hw.c
 create mode 100644 drivers/net/qede/base/ecore_hw.h
 create mode 100644 drivers/net/qede/base/ecore_hw_defs.h
 create mode 100644 drivers/net/qede/base/ecore_init_fw_funcs.c
 create mode 100644 drivers/net/qede/base/ecore_init_fw_funcs.h
 create mode 100644 drivers/net/qede/base/ecore_init_ops.c
 create mode 100644 drivers/net/qede/base/ecore_init_ops.h
 create mode 100644 drivers/net/qede/base/ecore_int.c
 create mode 100644 drivers/net/qede/base/ecore_int.h
 create mode 100644 drivers/net/qede/base/ecore_int_api.h
 create mode 100644 drivers/net/qede/base/ecore_iov_api.h
 create mode 100644 drivers/net/qede/base/ecore_iro.h
 create mode 100644 drivers/net/qede/base/ecore_iro_values.h
 create mode 100644 drivers/net/qede/base/ecore_l2.c
 create mode 100644 drivers/net/qede/base/ecore_l2.h
 create mode 100644 drivers/net/qede/base/ecore_l2_api.h
 create mode 100644 drivers/net/qede/base/ecore_mcp.c
 create mode 100644 drivers/net/qede/base/ecore_mcp.h
 create mode 100644 drivers/net/qede/base/ecore_mcp_api.h
 create mode 100644 drivers/net/qede/base/ecore_proto_if.h
 create mode 100644 drivers/net/qede/base/ecore_rt_defs.h
 create mode 100644 drivers/net/qede/base/ecore_sp_api.h
 create mode 100644 drivers/net/qede/base/ecore_sp_commands.c
 create mode 100644 drivers/net/qede/base/ecore_sp_commands.h
 create mode 100644 drivers/net/qede/base/ecore_spq.c
 create mode 100644 drivers/net/qede/base/ecore_spq.h
 create mode 100644 drivers/net/qede/base/ecore_sriov.c
 create mode 100644 drivers/net/qede/base/ecore_sriov.h
 create mode 100644 drivers/net/qede/base/ecore_status.h
 create mode 100644 drivers/net/qede/base/ecore_utils.h
 create mode 100644 drivers/net/qede/base/ecore_vf.c
 create mode 100644 drivers/net/qede/base/ecore_vf.h
 create mode 100644 drivers/net/qede/base/ecore_vf_api.h
 create mode 100644 drivers/net/qede/base/ecore_vfpf_if.h
 create mode 100644 drivers/net/qede/base/eth_common.h
 create mode 100644 drivers/net/qede/base/mcp_public.h
 create mode 100644 drivers/net/qede/base/nvm_cfg.h
 create mode 100644 drivers/net/qede/base/reg_addr.h
 create mode 100644 drivers/net/qede/qede_eth_if.c
 create mode 100644 drivers/net/qede/qede_eth_if.h
 create mode 100644 drivers/net/qede/qede_ethdev.c
 create mode 100644 drivers/net/qede/qede_ethdev.h
 create mode 100644 drivers/net/qede/qede_if.h
 create mode 100644 drivers/net/qede/qede_logs.h
 create mode 100644 drivers/net/qede/qede_main.c
 create mode 100644 drivers/net/qede/qede_rxtx.c
 create mode 100644 drivers/net/qede/qede_rxtx.h
 create mode 100644 drivers/net/qede/rte_pmd_qede_version.map

-- 
1.7.10.3

             reply	other threads:[~2016-04-01  2:15 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-04-01  2:15 Rasesh Mody [this message]
2016-04-01  2:15 ` [PATCH v5 01/10] qede: Add maintainers Rasesh Mody
2016-04-18 16:41   ` Thomas Monjalon
2016-04-18 21:40     ` Harish Patil
2016-04-01  2:15 ` [PATCH v5 02/10] qede: Add documentation Rasesh Mody
2016-04-01  2:15 ` [PATCH v5 03/10] qede: Add license file Rasesh Mody
2016-04-01  2:15 ` [PATCH v5 04/10] qede: Add base driver Rasesh Mody
2016-04-01  2:15 ` [PATCH v5 05/10] qede: Add core driver Rasesh Mody
2016-04-01 15:41   ` Stephen Hemminger
2016-04-01 15:42   ` Stephen Hemminger
2016-04-19 12:35   ` Thomas Monjalon
2016-04-19 12:59   ` Thomas Monjalon
2016-04-20  1:09     ` Rasesh Mody
2016-04-20  8:54       ` Thomas Monjalon
2016-04-22 10:48         ` Compiler minimum versions. (Was: [PATCH v5 05/10] qede: Add core driver) Bruce Richardson
2016-04-19 13:18   ` [PATCH v5 05/10] qede: Add core driver Thomas Monjalon
2016-04-20  1:10     ` Rasesh Mody
2016-04-01  2:15 ` [PATCH v5 06/10] qede: Add L2 support Rasesh Mody
2016-04-01  2:15 ` [PATCH v5 07/10] qede: Add SRIOV support Rasesh Mody
2016-04-01  2:15 ` [PATCH v5 08/10] qede: Add attention support Rasesh Mody
2016-04-01  2:15 ` [PATCH v5 09/10] qede: Add DCBX support Rasesh Mody
2016-04-19 12:51   ` Thomas Monjalon
2016-04-01  2:15 ` [PATCH v5 10/10] qede: Enable PMD build Rasesh Mody
2016-04-18 15:34   ` Thomas Monjalon
2016-04-20  0:07     ` Harish Patil
2016-04-18 15:37   ` Thomas Monjalon
2016-04-20  0:14     ` Harish Patil
2016-04-20  8:51       ` Thomas Monjalon
2016-04-20  9:25         ` Bruce Richardson
2016-04-20 16:43           ` Harish Patil
2016-04-21 10:01             ` Bruce Richardson
2016-04-20 16:36         ` Harish Patil
2016-04-01 15:44 ` [PATCH v5 00/10] qede: Add qede PMD Stephen Hemminger
2016-04-01 15:51   ` Harish Patil

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1459476927-21387-1-git-send-email-rasesh.mody@qlogic.com \
    --to=rasesh.mody@qlogic.com \
    --cc=ameen.rahman@qlogic.com \
    --cc=bruce.richardson@intel.com \
    --cc=dev@dpdk.org \
    --cc=harish.patil@qlogic.com \
    --cc=sony.chacko@qlogic.com \
    --cc=stephen@networkplumber.org \
    --cc=thomas.monjalon@6wind.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.