All of lore.kernel.org
 help / color / mirror / Atom feed
From: Wolfram Sang <wsa@the-dreams.de>
To: linux-watchdog@vger.kernel.org
Cc: Wolfram Sang <wsa@the-dreams.de>, linux-renesas-soc@vger.kernel.org
Subject: [PATCH v2 1/4] watchdog: renesas-wdt: add driver
Date: Fri,  1 Apr 2016 13:56:23 +0200	[thread overview]
Message-ID: <1459511786-4286-2-git-send-email-wsa@the-dreams.de> (raw)
In-Reply-To: <1459511786-4286-1-git-send-email-wsa@the-dreams.de>

From: Wolfram Sang <wsa+renesas@sang-engineering.com>

Add support for watchdogs (RWDT and SWDT) found on RCar Gen3 based SoCs
from Renesas.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---
 .../devicetree/bindings/watchdog/renesas-wdt.txt   |  25 +++
 drivers/watchdog/Kconfig                           |   8 +
 drivers/watchdog/Makefile                          |   1 +
 drivers/watchdog/renesas_wdt.c                     | 213 +++++++++++++++++++++
 4 files changed, 247 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/watchdog/renesas-wdt.txt
 create mode 100644 drivers/watchdog/renesas_wdt.c

diff --git a/Documentation/devicetree/bindings/watchdog/renesas-wdt.txt b/Documentation/devicetree/bindings/watchdog/renesas-wdt.txt
new file mode 100644
index 00000000000000..b9512f1eb80a02
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/renesas-wdt.txt
@@ -0,0 +1,25 @@
+Renesas Watchdog Timer (WDT) Controller
+
+Required properties:
+- compatible : Should be "renesas,r8a7795-wdt", or "renesas,rcar-gen3-wdt"
+
+  When compatible with the generic version, nodes must list the SoC-specific
+  version corresponding to the platform first, followed by the generic
+  version.
+
+- reg : Should contain WDT registers location and length
+- clocks : the clock feeding the watchdog timer.
+
+Optional properties:
+- timeout-sec : Contains the watchdog timeout in seconds
+- power-domains : the power domain the WDT belongs to
+
+Examples:
+
+	wdt0: watchdog@e6020000 {
+		compatible = "renesas,r8a7795-wdt", "renesas,rcar-gen3-wdt";
+		reg = <0 0xe6020000 0 0x0c>;
+		clocks = <&cpg CPG_MOD 402>;
+		power-domains = <&cpg>;
+		timeout-sec = <60>;
+	};
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index fb947655badd02..3902c9ca7f099d 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -661,6 +661,14 @@ config ATLAS7_WATCHDOG
 	  To compile this driver as a module, choose M here: the
 	  module will be called atlas7_wdt.
 
+config RENESAS_WDT
+	tristate "Renesas WDT Watchdog"
+	depends on ARCH_RENESAS || COMPILE_TEST
+	select WATCHDOG_CORE
+	help
+	  This driver adds watchdog support for the integrated watchdogs in the
+	  Renesas R-Car and other SH-Mobile SoCs (usually named RWDT or SWDT).
+
 # AVR32 Architecture
 
 config AT32AP700X_WDT
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index feb6270fdbde5f..2cbc9709852d0e 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -73,6 +73,7 @@ obj-$(CONFIG_DIGICOLOR_WATCHDOG) += digicolor_wdt.o
 obj-$(CONFIG_LPC18XX_WATCHDOG) += lpc18xx_wdt.o
 obj-$(CONFIG_BCM7038_WDT) += bcm7038_wdt.o
 obj-$(CONFIG_ATLAS7_WATCHDOG) += atlas7_wdt.o
+obj-$(CONFIG_RENESAS_WDT) += renesas_wdt.o
 
 # AVR32 Architecture
 obj-$(CONFIG_AT32AP700X_WDT) += at32ap700x_wdt.o
diff --git a/drivers/watchdog/renesas_wdt.c b/drivers/watchdog/renesas_wdt.c
new file mode 100644
index 00000000000000..cf61c92f7ecd63
--- /dev/null
+++ b/drivers/watchdog/renesas_wdt.c
@@ -0,0 +1,213 @@
+/*
+ * Watchdog driver for Renesas WDT watchdog
+ *
+ * Copyright (C) 2015-16 Wolfram Sang, Sang Engineering <wsa@sang-engineering.com>
+ * Copyright (C) 2015-16 Renesas Electronics Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/watchdog.h>
+
+#define RWTCNT		0
+#define RWTCSRA		4
+#define RWTCSRA_WOVF	BIT(4)
+#define RWTCSRA_WRFLG	BIT(5)
+#define RWTCSRA_TME	BIT(7)
+
+#define RWDT_DEFAULT_TIMEOUT 60U
+
+static const unsigned int clk_divs[] = { 1, 4, 16, 32, 64, 128, 1024 };
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+struct rwdt_priv {
+	void __iomem *base;
+	struct watchdog_device wdev;
+	struct clk *clk;
+	unsigned int clks_per_sec;
+	u8 cks;
+};
+
+static void rwdt_write(struct rwdt_priv *priv, u32 val, unsigned int reg)
+{
+	if (reg == RWTCNT)
+		val |= 0x5a5a0000;
+	else
+		val |= 0xa5a5a500;
+
+	writel_relaxed(val, priv->base + reg);
+}
+
+static int rwdt_init_timeout(struct watchdog_device *wdev)
+{
+	struct rwdt_priv *priv = watchdog_get_drvdata(wdev);
+
+	rwdt_write(priv, 65536 - wdev->timeout * priv->clks_per_sec, RWTCNT);
+
+	return 0;
+}
+
+static int rwdt_start(struct watchdog_device *wdev)
+{
+	struct rwdt_priv *priv = watchdog_get_drvdata(wdev);
+
+	clk_prepare_enable(priv->clk);
+
+	rwdt_write(priv, priv->cks, RWTCSRA);
+	rwdt_init_timeout(wdev);
+
+	while (readb_relaxed(priv->base + RWTCSRA) & RWTCSRA_WRFLG)
+		cpu_relax();
+
+	rwdt_write(priv, priv->cks | RWTCSRA_TME, RWTCSRA);
+
+	return 0;
+}
+
+static int rwdt_stop(struct watchdog_device *wdev)
+{
+	struct rwdt_priv *priv = watchdog_get_drvdata(wdev);
+
+	rwdt_write(priv, priv->cks, RWTCSRA);
+	clk_disable_unprepare(priv->clk);
+
+	return 0;
+}
+
+static unsigned int rwdt_get_timeleft(struct watchdog_device *wdev)
+{
+	struct rwdt_priv *priv = watchdog_get_drvdata(wdev);
+	u16 val = readw_relaxed(priv->base + RWTCNT);
+
+	return DIV_ROUND_CLOSEST(65536 - val, priv->clks_per_sec);
+}
+
+static const struct watchdog_info rwdt_ident = {
+	.options = WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT,
+	.identity = "Renesas WDT Watchdog",
+};
+
+static const struct watchdog_ops rwdt_ops = {
+	.owner = THIS_MODULE,
+	.start = rwdt_start,
+	.stop = rwdt_stop,
+	.ping = rwdt_init_timeout,
+	.get_timeleft = rwdt_get_timeleft,
+};
+
+static int rwdt_probe(struct platform_device *pdev)
+{
+	struct rwdt_priv *priv;
+	struct resource *res;
+	unsigned long rate;
+	unsigned int clks_per_sec;
+	int ret, i;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	priv->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(priv->base))
+		return PTR_ERR(priv->base);
+
+	priv->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(priv->clk))
+		return PTR_ERR(priv->clk);
+
+	rate = clk_get_rate(priv->clk);
+	if (!rate)
+		return -ENOENT;
+
+	for (i = ARRAY_SIZE(clk_divs) - 1; i >= 0; i--) {
+		clks_per_sec = DIV_ROUND_UP(rate, clk_divs[i]);
+		if (clks_per_sec) {
+			priv->clks_per_sec = clks_per_sec;
+			priv->cks = i;
+			break;
+		}
+	}
+
+	if (!clks_per_sec) {
+		dev_err(&pdev->dev, "Can't find suitable clock divider\n");
+		return -ERANGE;
+	}
+
+	pm_runtime_enable(&pdev->dev);
+	pm_runtime_get_sync(&pdev->dev);
+
+	priv->wdev.info = &rwdt_ident,
+	priv->wdev.ops = &rwdt_ops,
+	priv->wdev.parent = &pdev->dev;
+	priv->wdev.min_timeout = 1;
+	priv->wdev.max_timeout = 65536 / clks_per_sec;
+	priv->wdev.timeout = min(priv->wdev.max_timeout, RWDT_DEFAULT_TIMEOUT);
+
+	platform_set_drvdata(pdev, priv);
+	watchdog_set_drvdata(&priv->wdev, priv);
+	watchdog_set_nowayout(&priv->wdev, nowayout);
+
+	/* This overrides the default timeout only if DT configuration was found */
+	ret = watchdog_init_timeout(&priv->wdev, 0, &pdev->dev);
+	if (ret)
+		dev_warn(&pdev->dev, "Specified timeout value invalid, using default\n");
+
+	ret = watchdog_register_device(&priv->wdev);
+	if (ret < 0) {
+		pm_runtime_put(&pdev->dev);
+		pm_runtime_disable(&pdev->dev);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int rwdt_remove(struct platform_device *pdev)
+{
+	struct rwdt_priv *priv = platform_get_drvdata(pdev);
+
+	watchdog_unregister_device(&priv->wdev);
+	pm_runtime_put(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
+
+	return 0;
+}
+
+/*
+ * This driver does also fit for R-Car Gen2 (r8a779[0-4]) WDT. However, for SMP
+ * to work there, one also needs a RESET (RST) driver which does not exist yet
+ * due to HW issues. This needs to be solved before adding compatibles here.
+ */
+static const struct of_device_id rwdt_ids[] = {
+	{ .compatible = "renesas,rcar-gen3-wdt", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, rwdt_ids);
+
+static struct platform_driver rwdt_driver = {
+	.driver = {
+		.name = "renesas_wdt",
+		.of_match_table = rwdt_ids,
+	},
+	.probe = rwdt_probe,
+	.remove = rwdt_remove,
+};
+module_platform_driver(rwdt_driver);
+
+MODULE_DESCRIPTION("Renesas WDT Watchdog Driver");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Wolfram Sang <wsa@sang-engineering.com>");
-- 
2.7.0


  reply	other threads:[~2016-04-01 11:56 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-04-01 11:56 [PATCH v2 0/4] watchdog: add driver for Renesas Gen3 WDT watchdogs Wolfram Sang
2016-04-01 11:56 ` Wolfram Sang [this message]
     [not found]   ` <57010C13.7040007@rempel-privat.de>
     [not found]     ` <20160404104508.GA1383@katana>
     [not found]       ` <57025C5A.2060704@de.bosch.com>
2016-04-04 12:36         ` [PATCH v2 1/4] watchdog: renesas-wdt: add driver Wolfram Sang
2016-04-04 14:08           ` Guenter Roeck
     [not found]             ` <57035A6A.3020601@de.bosch.com>
2016-04-05 18:47               ` Guenter Roeck
     [not found]                 ` <5704A10C.10701@de.bosch.com>
2016-04-06 15:36                   ` Guenter Roeck
2016-04-01 11:56 ` [PATCH v2 2/4] arm64: dts: r8a7795: Add RWDT node Wolfram Sang
2016-04-04  8:41   ` Geert Uytterhoeven
2016-04-04 14:00   ` Guenter Roeck
2016-04-04 14:06     ` Wolfram Sang
2016-05-18  9:38     ` Wolfram Sang
2016-05-20  4:13       ` Simon Horman
2016-04-01 11:56 ` [PATCH v2 3/4] arm64: dts: salvator-x: Enable watchdog timer Wolfram Sang
2016-04-04  8:44   ` Geert Uytterhoeven
2016-04-04 14:01   ` Guenter Roeck
2016-05-18  9:39     ` Wolfram Sang
2016-05-20  4:13       ` Simon Horman
2016-04-01 11:56 ` [PATCH v2 4/4] arm64: defconfig: enable Renesas Watchdog Timer Wolfram Sang
2016-04-04  8:45   ` Geert Uytterhoeven
2016-04-04 14:05   ` Guenter Roeck
2016-04-04 14:51 ` [PATCH v2 0/4] watchdog: add driver for Renesas Gen3 WDT watchdogs Geert Uytterhoeven
2016-04-04 14:59   ` Wolfram Sang
2016-04-04 15:21     ` Geert Uytterhoeven
2016-04-04 15:23       ` Wolfram Sang
2016-04-04 15:25       ` Guenter Roeck
2016-04-04 17:02         ` Geert Uytterhoeven
2016-04-04 17:52           ` Guenter Roeck
2016-04-04 18:14             ` Geert Uytterhoeven
2016-04-04 18:23               ` Guenter Roeck
2016-04-04 19:12               ` Wolfram Sang
2016-05-14 16:45 ` Wim Van Sebroeck

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1459511786-4286-2-git-send-email-wsa@the-dreams.de \
    --to=wsa@the-dreams.de \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=linux-watchdog@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.