From mboxrd@z Thu Jan 1 00:00:00 1970 From: Eric Nelson Date: Fri, 1 Apr 2016 08:47:38 -0700 Subject: [U-Boot] [PATCH 3/7] gpio: omap: remove gpio_xlate routine In-Reply-To: <1459525662-28032-1-git-send-email-eric@nelint.com> References: <56FD8B60.8060103@nelint.com> <1459525662-28032-1-git-send-email-eric@nelint.com> Message-ID: <1459525662-28032-4-git-send-email-eric@nelint.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de With the addition of GPIO_ACTIVE_LOW parsing in gpio-uclass, the omap gpio driver doesn't need a custom xlate routine. Signed-off-by: Eric Nelson --- drivers/gpio/omap_gpio.c | 10 ---------- 1 file changed, 10 deletions(-) diff --git a/drivers/gpio/omap_gpio.c b/drivers/gpio/omap_gpio.c index 93d18e4..5ab53bc 100644 --- a/drivers/gpio/omap_gpio.c +++ b/drivers/gpio/omap_gpio.c @@ -277,22 +277,12 @@ static int omap_gpio_get_function(struct udevice *dev, unsigned offset) return GPIOF_INPUT; } -static int omap_gpio_xlate(struct udevice *dev, struct gpio_desc *desc, - struct fdtdec_phandle_args *args) -{ - desc->offset = args->args[0]; - desc->flags = args->args[1] & GPIO_ACTIVE_LOW ? GPIOD_ACTIVE_LOW : 0; - - return 0; -} - static const struct dm_gpio_ops gpio_omap_ops = { .direction_input = omap_gpio_direction_input, .direction_output = omap_gpio_direction_output, .get_value = omap_gpio_get_value, .set_value = omap_gpio_set_value, .get_function = omap_gpio_get_function, - .xlate = omap_gpio_xlate, }; static int omap_gpio_probe(struct udevice *dev) -- 2.6.2