From mboxrd@z Thu Jan 1 00:00:00 1970 From: Ard Biesheuvel Subject: [PATCH v3 0/9] EFI framebuffer support for ARM and arm64 Date: Fri, 1 Apr 2016 18:05:26 +0200 Message-ID: <1459526735-24936-1-git-send-email-ard.biesheuvel@linaro.org> Return-path: Sender: linux-efi-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: linux-efi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, matt-mF/unelCI9GS6iBeEJttW/XRex20P6io@public.gmane.org Cc: mark.rutland-5wv7dgnIgG8@public.gmane.org, will.deacon-5wv7dgnIgG8@public.gmane.org, dh.herrmann-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org, pjones-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org, Ard Biesheuvel List-Id: linux-efi@vger.kernel.org This series adds support to ARM and arm64 for using the kernel's EFI framebuffer driver to drive EFI Graphics Output Protocol (GOP) based framebuffers. This involves refactoring some of the existing x86 code so it can be reused by ARM and arm64, and wiring it up both in the UEFI stub and in the core kernel into the existing UEFI infrastructure for ARM and arm64. Changes since v2: - added acks from Peter and David (patches #3 and #4) - move introduction of typedef of efi_graphics_output_protocol_query_mode to patch #1 (and move it along in a subsequent patch) to fix a transient build issue spotted by the kbuild robot - register screen_info as platform driver data explicitly, as x86 does (David) - assign dummy values to screen_info.orig_video_cols/orig_video_lines, this is required by dummycon on ARM Changes since v1: - don't use const efi_guid_t and subsequently cast away constness - update first, then move the x86 GOP code rather than creating a copy and update at the same time, and delete the x86 code later: this should make it easier to spot changes to the code that affect its correct operation on x86 - refactor the ARM changes so that the config table creation and consumption is introduced in the same patch (including the prototype changes for the install_configuration_table() boot service function pointer) - use true/false rather than 1/0 - split stub changes into 32-bit arm/64-bit arm/common arm - split platform device changes from platform driver changes (latter is basically only a Kconfig change) Ard Biesheuvel (9): efi/x86: prepare GOP handling code for reuse as generic code efi: libstub: move Graphics Output Protocol handling to generic code efi/x86: efifb: move DMI based quirks handling out of generic code efi: efifb: use builtin_platform_driver and drop unused includes efi/arm64: libstub: make screen_info accessible to the UEFI stub efi/arm: libstub: make screen_info accessible to the UEFI stub efi/arm*: libstub: wire up GOP protocol to struct screen_info efi/arm*: wire up struct screen_info to efi-framebuffer platform device efifb: enable the efi-framebuffer platform driver for ARM and arm64 arch/arm/include/asm/efi.h | 11 +- arch/arm/kernel/setup.c | 3 +- arch/arm64/include/asm/efi.h | 11 +- arch/arm64/kernel/efi.c | 3 + arch/arm64/kernel/image.h | 1 + arch/x86/boot/compressed/eboot.c | 308 +---------------- arch/x86/boot/compressed/eboot.h | 74 ---- arch/x86/include/asm/efi.h | 7 + arch/x86/kernel/sysfb_efi.c | 15 + drivers/firmware/efi/arm-init.c | 52 ++- drivers/firmware/efi/efi.c | 5 +- drivers/firmware/efi/libstub/Makefile | 2 +- drivers/firmware/efi/libstub/arm-stub.c | 23 ++ drivers/firmware/efi/libstub/arm32-stub.c | 37 ++ drivers/firmware/efi/libstub/gop.c | 354 ++++++++++++++++++++ drivers/video/fbdev/Kconfig | 2 +- drivers/video/fbdev/efifb.c | 21 +- include/linux/efi.h | 97 +++++- 18 files changed, 619 insertions(+), 407 deletions(-) create mode 100644 drivers/firmware/efi/libstub/gop.c -- 2.5.0 From mboxrd@z Thu Jan 1 00:00:00 1970 From: ard.biesheuvel@linaro.org (Ard Biesheuvel) Date: Fri, 1 Apr 2016 18:05:26 +0200 Subject: [PATCH v3 0/9] EFI framebuffer support for ARM and arm64 Message-ID: <1459526735-24936-1-git-send-email-ard.biesheuvel@linaro.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org This series adds support to ARM and arm64 for using the kernel's EFI framebuffer driver to drive EFI Graphics Output Protocol (GOP) based framebuffers. This involves refactoring some of the existing x86 code so it can be reused by ARM and arm64, and wiring it up both in the UEFI stub and in the core kernel into the existing UEFI infrastructure for ARM and arm64. Changes since v2: - added acks from Peter and David (patches #3 and #4) - move introduction of typedef of efi_graphics_output_protocol_query_mode to patch #1 (and move it along in a subsequent patch) to fix a transient build issue spotted by the kbuild robot - register screen_info as platform driver data explicitly, as x86 does (David) - assign dummy values to screen_info.orig_video_cols/orig_video_lines, this is required by dummycon on ARM Changes since v1: - don't use const efi_guid_t and subsequently cast away constness - update first, then move the x86 GOP code rather than creating a copy and update at the same time, and delete the x86 code later: this should make it easier to spot changes to the code that affect its correct operation on x86 - refactor the ARM changes so that the config table creation and consumption is introduced in the same patch (including the prototype changes for the install_configuration_table() boot service function pointer) - use true/false rather than 1/0 - split stub changes into 32-bit arm/64-bit arm/common arm - split platform device changes from platform driver changes (latter is basically only a Kconfig change) Ard Biesheuvel (9): efi/x86: prepare GOP handling code for reuse as generic code efi: libstub: move Graphics Output Protocol handling to generic code efi/x86: efifb: move DMI based quirks handling out of generic code efi: efifb: use builtin_platform_driver and drop unused includes efi/arm64: libstub: make screen_info accessible to the UEFI stub efi/arm: libstub: make screen_info accessible to the UEFI stub efi/arm*: libstub: wire up GOP protocol to struct screen_info efi/arm*: wire up struct screen_info to efi-framebuffer platform device efifb: enable the efi-framebuffer platform driver for ARM and arm64 arch/arm/include/asm/efi.h | 11 +- arch/arm/kernel/setup.c | 3 +- arch/arm64/include/asm/efi.h | 11 +- arch/arm64/kernel/efi.c | 3 + arch/arm64/kernel/image.h | 1 + arch/x86/boot/compressed/eboot.c | 308 +---------------- arch/x86/boot/compressed/eboot.h | 74 ---- arch/x86/include/asm/efi.h | 7 + arch/x86/kernel/sysfb_efi.c | 15 + drivers/firmware/efi/arm-init.c | 52 ++- drivers/firmware/efi/efi.c | 5 +- drivers/firmware/efi/libstub/Makefile | 2 +- drivers/firmware/efi/libstub/arm-stub.c | 23 ++ drivers/firmware/efi/libstub/arm32-stub.c | 37 ++ drivers/firmware/efi/libstub/gop.c | 354 ++++++++++++++++++++ drivers/video/fbdev/Kconfig | 2 +- drivers/video/fbdev/efifb.c | 21 +- include/linux/efi.h | 97 +++++- 18 files changed, 619 insertions(+), 407 deletions(-) create mode 100644 drivers/firmware/efi/libstub/gop.c -- 2.5.0