From: andrew@lunn.ch (Andrew Lunn)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 5/8] ARM: kirkwood: DT: Fixup pcie DT warnings
Date: Sun, 3 Apr 2016 04:03:47 +0200 [thread overview]
Message-ID: <1459649030-21886-6-git-send-email-andrew@lunn.ch> (raw)
In-Reply-To: <1459649030-21886-1-git-send-email-andrew@lunn.ch>
PCIe has a range property, so the unit name should contain an address.
Make use of the label to enable individual PCIe busses. Also, fixup
the synology dtsi file which added a label pcie2 rather than using the
existing pcie1 label.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
---
arch/arm/boot/dts/kirkwood-6192.dtsi | 2 +-
arch/arm/boot/dts/kirkwood-6281.dtsi | 2 +-
arch/arm/boot/dts/kirkwood-6282.dtsi | 2 +-
arch/arm/boot/dts/kirkwood-98dx4122.dtsi | 2 +-
arch/arm/boot/dts/kirkwood-b3.dts | 19 ++++++++-----------
arch/arm/boot/dts/kirkwood-db-88f6281.dts | 14 ++++++--------
arch/arm/boot/dts/kirkwood-db-88f6282.dts | 20 +++++++++-----------
arch/arm/boot/dts/kirkwood-dir665.dts | 18 ++++++++----------
arch/arm/boot/dts/kirkwood-ds111.dts | 2 +-
arch/arm/boot/dts/kirkwood-ds112.dts | 6 +++++-
arch/arm/boot/dts/kirkwood-ds212.dts | 2 +-
arch/arm/boot/dts/kirkwood-ds411.dts | 6 +++++-
arch/arm/boot/dts/kirkwood-ds411slim.dts | 2 +-
arch/arm/boot/dts/kirkwood-iconnect.dts | 18 ++++++++----------
arch/arm/boot/dts/kirkwood-km_common.dtsi | 18 ++++++++----------
arch/arm/boot/dts/kirkwood-laplug.dts | 17 ++++++++---------
arch/arm/boot/dts/kirkwood-linkstation.dtsi | 17 ++++++++---------
arch/arm/boot/dts/kirkwood-mplcec4.dts | 18 ++++++++----------
arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts | 18 ++++++++----------
arch/arm/boot/dts/kirkwood-nas2big.dts | 18 ++++++++----------
.../boot/dts/kirkwood-netgear_readynas_duo_v2.dts | 18 ++++++++----------
.../boot/dts/kirkwood-netgear_readynas_nv+_v2.dts | 21 +++++++++------------
arch/arm/boot/dts/kirkwood-nsa310.dts | 18 ++++++++----------
arch/arm/boot/dts/kirkwood-nsa320.dts | 18 ++++++++----------
arch/arm/boot/dts/kirkwood-nsa325.dts | 17 +++++++----------
arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi | 18 ++++++++----------
arch/arm/boot/dts/kirkwood-openrd.dtsi | 14 ++++----------
arch/arm/boot/dts/kirkwood-rd88f6192.dts | 20 +++++++++-----------
arch/arm/boot/dts/kirkwood-rd88f6281.dtsi | 18 ++++++++----------
arch/arm/boot/dts/kirkwood-rs212.dts | 6 +++++-
arch/arm/boot/dts/kirkwood-synology.dtsi | 22 ++++++++--------------
arch/arm/boot/dts/kirkwood-t5325.dts | 18 ++++++++----------
arch/arm/boot/dts/kirkwood-ts219-6282.dts | 12 ++----------
arch/arm/boot/dts/kirkwood-ts219.dtsi | 18 ++++++++----------
arch/arm/boot/dts/kirkwood-ts419-6282.dts | 15 +++------------
35 files changed, 207 insertions(+), 267 deletions(-)
diff --git a/arch/arm/boot/dts/kirkwood-6192.dtsi b/arch/arm/boot/dts/kirkwood-6192.dtsi
index 9e6e9e2691d5..1014a5dd9035 100644
--- a/arch/arm/boot/dts/kirkwood-6192.dtsi
+++ b/arch/arm/boot/dts/kirkwood-6192.dtsi
@@ -1,6 +1,6 @@
/ {
mbus {
- pciec: pcie-controller {
+ pciec: pcie-controller at 82000000 {
compatible = "marvell,kirkwood-pcie";
status = "disabled";
device_type = "pci";
diff --git a/arch/arm/boot/dts/kirkwood-6281.dtsi b/arch/arm/boot/dts/kirkwood-6281.dtsi
index 7dc7d6782e83..fad201551304 100644
--- a/arch/arm/boot/dts/kirkwood-6281.dtsi
+++ b/arch/arm/boot/dts/kirkwood-6281.dtsi
@@ -1,6 +1,6 @@
/ {
mbus {
- pciec: pcie-controller {
+ pciec: pcie-controller at 82000000 {
compatible = "marvell,kirkwood-pcie";
status = "disabled";
device_type = "pci";
diff --git a/arch/arm/boot/dts/kirkwood-6282.dtsi b/arch/arm/boot/dts/kirkwood-6282.dtsi
index 4680eec990f0..27434c35eb66 100644
--- a/arch/arm/boot/dts/kirkwood-6282.dtsi
+++ b/arch/arm/boot/dts/kirkwood-6282.dtsi
@@ -1,6 +1,6 @@
/ {
mbus {
- pciec: pcie-controller {
+ pciec: pcie-controller at 82000000 {
compatible = "marvell,kirkwood-pcie";
status = "disabled";
device_type = "pci";
diff --git a/arch/arm/boot/dts/kirkwood-98dx4122.dtsi b/arch/arm/boot/dts/kirkwood-98dx4122.dtsi
index 9e1f741d74ff..17eb92733310 100644
--- a/arch/arm/boot/dts/kirkwood-98dx4122.dtsi
+++ b/arch/arm/boot/dts/kirkwood-98dx4122.dtsi
@@ -1,6 +1,6 @@
/ {
mbus {
- pciec: pcie-controller {
+ pciec: pcie-controller at 82000000 {
compatible = "marvell,kirkwood-pcie";
status = "disabled";
device_type = "pci";
diff --git a/arch/arm/boot/dts/kirkwood-b3.dts b/arch/arm/boot/dts/kirkwood-b3.dts
index d2936ad3af1d..d091ecb61cd2 100644
--- a/arch/arm/boot/dts/kirkwood-b3.dts
+++ b/arch/arm/boot/dts/kirkwood-b3.dts
@@ -33,17 +33,6 @@
stdout-path = &uart0;
};
- mbus {
- pcie-controller {
- status = "okay";
-
- /* Wifi model has Atheros chipset on pcie port */
- pcie at 1,0 {
- status = "okay";
- };
- };
- };
-
ocp at f1000000 {
pinctrl: pin-controller at 10000 {
pmx_button_power: pmx-button-power {
@@ -199,3 +188,11 @@
};
};
+/* Wifi model has Atheros chipset on pcie port */
+&pciec {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-db-88f6281.dts b/arch/arm/boot/dts/kirkwood-db-88f6281.dts
index c39dd766c75a..aee6f02b1c80 100644
--- a/arch/arm/boot/dts/kirkwood-db-88f6281.dts
+++ b/arch/arm/boot/dts/kirkwood-db-88f6281.dts
@@ -17,14 +17,12 @@
/ {
model = "Marvell DB-88F6281-BP Development Board";
compatible = "marvell,db-88f6281-bp", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+};
- mbus {
- pcie-controller {
- status = "okay";
+&pciec {
+ status = "okay";
+};
- pcie at 1,0 {
- status = "okay";
- };
- };
- };
+&pcie0 {
+ status = "okay";
};
diff --git a/arch/arm/boot/dts/kirkwood-db-88f6282.dts b/arch/arm/boot/dts/kirkwood-db-88f6282.dts
index 701c6b6cdaa2..e8b23e13ec0c 100644
--- a/arch/arm/boot/dts/kirkwood-db-88f6282.dts
+++ b/arch/arm/boot/dts/kirkwood-db-88f6282.dts
@@ -17,18 +17,16 @@
/ {
model = "Marvell DB-88F6282-BP Development Board";
compatible = "marvell,db-88f6282-bp", "marvell,kirkwood-88f6282", "marvell,kirkwood";
+};
- mbus {
- pcie-controller {
- status = "okay";
+&pciec {
+ status = "okay";
+};
- pcie at 1,0 {
- status = "okay";
- };
+&pcie0 {
+ status = "okay";
+};
- pcie at 2,0 {
- status = "okay";
- };
- };
- };
+&pcie1 {
+ status = "okay";
};
diff --git a/arch/arm/boot/dts/kirkwood-dir665.dts b/arch/arm/boot/dts/kirkwood-dir665.dts
index f548363060ea..41acbb6dd6ab 100644
--- a/arch/arm/boot/dts/kirkwood-dir665.dts
+++ b/arch/arm/boot/dts/kirkwood-dir665.dts
@@ -25,16 +25,6 @@
stdout-path = &uart0;
};
- mbus {
- pcie-controller {
- status = "okay";
-
- pcie at 1,0 {
- status = "okay";
- };
- };
- };
-
ocp at f1000000 {
pinctrl: pin-controller at 10000 {
pinctrl-0 =< &pmx_led_usb
@@ -276,3 +266,11 @@
&rtc {
status = "disabled";
};
+
+&pciec {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-ds111.dts b/arch/arm/boot/dts/kirkwood-ds111.dts
index 61f47fbe44d0..a85a4664431b 100644
--- a/arch/arm/boot/dts/kirkwood-ds111.dts
+++ b/arch/arm/boot/dts/kirkwood-ds111.dts
@@ -40,6 +40,6 @@
status = "okay";
};
-&pcie2 {
+&pcie1 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/kirkwood-ds112.dts b/arch/arm/boot/dts/kirkwood-ds112.dts
index b84af3da8c84..6cef4bdbc01b 100644
--- a/arch/arm/boot/dts/kirkwood-ds112.dts
+++ b/arch/arm/boot/dts/kirkwood-ds112.dts
@@ -44,6 +44,10 @@
status = "okay";
};
-&pcie2 {
+&pciec {
+ status = "okay";
+};
+
+&pcie1 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/kirkwood-ds212.dts b/arch/arm/boot/dts/kirkwood-ds212.dts
index 99afd462f956..7f32e7abffac 100644
--- a/arch/arm/boot/dts/kirkwood-ds212.dts
+++ b/arch/arm/boot/dts/kirkwood-ds212.dts
@@ -43,6 +43,6 @@
status = "okay";
};
-&pcie2 {
+&pcie1 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/kirkwood-ds411.dts b/arch/arm/boot/dts/kirkwood-ds411.dts
index 623cd4a37d71..72e58307416d 100644
--- a/arch/arm/boot/dts/kirkwood-ds411.dts
+++ b/arch/arm/boot/dts/kirkwood-ds411.dts
@@ -48,6 +48,10 @@
status = "okay";
};
-&pcie2 {
+&pciec {
+ status = "okay";
+};
+
+&pcie1 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/kirkwood-ds411slim.dts b/arch/arm/boot/dts/kirkwood-ds411slim.dts
index a0a1fad8b4de..aaaf31b81522 100644
--- a/arch/arm/boot/dts/kirkwood-ds411slim.dts
+++ b/arch/arm/boot/dts/kirkwood-ds411slim.dts
@@ -44,6 +44,6 @@
status = "okay";
};
-&pcie2 {
+&pcie1 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/kirkwood-iconnect.dts
index 674306746dec..d25184ae4af3 100644
--- a/arch/arm/boot/dts/kirkwood-iconnect.dts
+++ b/arch/arm/boot/dts/kirkwood-iconnect.dts
@@ -19,16 +19,6 @@
linux,initrd-end = <0x4800000>;
};
- mbus {
- pcie-controller {
- status = "okay";
-
- pcie at 1,0 {
- status = "okay";
- };
- };
- };
-
ocp at f1000000 {
pinctrl: pin-controller at 10000 {
pmx_button_reset: pmx-button-reset {
@@ -194,3 +184,11 @@
phy-handle = <ðphy0>;
};
};
+
+&pciec {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-km_common.dtsi b/arch/arm/boot/dts/kirkwood-km_common.dtsi
index 8367c772c764..f6096f56046d 100644
--- a/arch/arm/boot/dts/kirkwood-km_common.dtsi
+++ b/arch/arm/boot/dts/kirkwood-km_common.dtsi
@@ -4,16 +4,6 @@
stdout-path = &uart0;
};
- mbus {
- pcie-controller {
- status = "okay";
-
- pcie at 1,0 {
- status = "okay";
- };
- };
- };
-
ocp at f1000000 {
pinctrl: pin-controller at 10000 {
pinctrl-0 = < &pmx_i2c_gpio_sda &pmx_i2c_gpio_scl >;
@@ -46,3 +36,11 @@
status = "okay";
chip-delay = <25>;
};
+
+&pciec {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-laplug.dts b/arch/arm/boot/dts/kirkwood-laplug.dts
index c39e17a89f4e..1b0f070c2676 100644
--- a/arch/arm/boot/dts/kirkwood-laplug.dts
+++ b/arch/arm/boot/dts/kirkwood-laplug.dts
@@ -27,15 +27,6 @@
stdout-path = &uart0;
};
- mbus {
- pcie-controller {
- status = "okay";
- pcie at 1,0 {
- status = "okay";
- };
- };
- };
-
ocp at f1000000 {
serial at 12000 {
status = "okay";
@@ -169,3 +160,11 @@
phy-handle = <ðphy0>;
};
};
+
+&pciec {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-linkstation.dtsi b/arch/arm/boot/dts/kirkwood-linkstation.dtsi
index 69061b6e987b..36c54c9dfa30 100644
--- a/arch/arm/boot/dts/kirkwood-linkstation.dtsi
+++ b/arch/arm/boot/dts/kirkwood-linkstation.dtsi
@@ -49,15 +49,6 @@
stdout-path = &uart0;
};
- mbus {
- pcie-controller {
- status = "okay";
- pcie at 1,0 {
- status = "okay";
- };
- };
- };
-
ocp at f1000000 {
pinctrl: pin-controller at 10000 {
pmx_power_hdd0: pmx-power-hdd0 {
@@ -200,3 +191,11 @@
};
};
};
+
+&pciec {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-mplcec4.dts b/arch/arm/boot/dts/kirkwood-mplcec4.dts
index f3a991837515..aa413b0bcce2 100644
--- a/arch/arm/boot/dts/kirkwood-mplcec4.dts
+++ b/arch/arm/boot/dts/kirkwood-mplcec4.dts
@@ -17,16 +17,6 @@
stdout-path = &uart0;
};
- mbus {
- pcie-controller {
- status = "okay";
-
- pcie at 1,0 {
- status = "okay";
- };
- };
- };
-
ocp at f1000000 {
pinctrl: pin-controller at 10000 {
pmx_led_health: pmx-led-health {
@@ -215,3 +205,11 @@
phy-handle = <ðphy1>;
};
};
+
+&pciec {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
index 26fb610b2af7..172a38c0b8a9 100644
--- a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
+++ b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
@@ -31,16 +31,6 @@
stdout-path = &uart0;
};
- mbus {
- pcie-controller {
- status = "okay";
-
- pcie at 1,0 {
- status = "okay";
- };
- };
- };
-
ocp at f1000000 {
pin-controller at 10000 {
pmx_usb_led: pmx-usb-led {
@@ -179,3 +169,11 @@
duplex = <1>;
};
};
+
+&pciec {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-nas2big.dts b/arch/arm/boot/dts/kirkwood-nas2big.dts
index 7427ec50b829..f53bcacf6b63 100644
--- a/arch/arm/boot/dts/kirkwood-nas2big.dts
+++ b/arch/arm/boot/dts/kirkwood-nas2big.dts
@@ -28,16 +28,6 @@
stdout-path = &uart0;
};
- mbus {
- pcie-controller {
- status = "okay";
-
- pcie at 1,0 {
- status = "okay";
- };
- };
- };
-
ocp at f1000000 {
rtc at 10300 {
/* The on-chip RTC is not powered (no supercap). */
@@ -141,3 +131,11 @@
reg = <0x9100000 0x6f00000>;
};
};
+
+&pciec {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts
index fd733c63bc27..8745484912d2 100644
--- a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts
+++ b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts
@@ -28,16 +28,6 @@
stdout-path = &uart0;
};
- mbus {
- pcie-controller {
- status = "okay";
-
- pcie at 1,0 {
- status = "okay";
- };
- };
- };
-
ocp at f1000000 {
pinctrl: pin-controller at 10000 {
pmx_button_power: pmx-button-power {
@@ -251,3 +241,11 @@
phy-handle = <ðphy0>;
};
};
+
+&pciec {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts b/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts
index b514d643fb6c..a4e97f7f5804 100644
--- a/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts
+++ b/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts
@@ -28,18 +28,6 @@
stdout-path = &uart0;
};
- mbus {
- pcie-controller {
- status = "okay";
-
- /* Connected to NEC uPD720200 USB 3.0 controller */
- pcie at 1,0 {
- /* Port 0, Lane 0 */
- status = "okay";
- };
- };
- };
-
ocp at f1000000 {
pinctrl: pin-controller at 10000 {
pmx_button_power: pmx-button-power {
@@ -265,3 +253,12 @@
phy-handle = <ðphy0>;
};
};
+
+/* Connected to NEC uPD720200 USB 3.0 controller */
+&pciec {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-nsa310.dts b/arch/arm/boot/dts/kirkwood-nsa310.dts
index 6139df0f376c..0b69ee4934fa 100644
--- a/arch/arm/boot/dts/kirkwood-nsa310.dts
+++ b/arch/arm/boot/dts/kirkwood-nsa310.dts
@@ -15,16 +15,6 @@
stdout-path = &uart0;
};
- mbus {
- pcie-controller {
- status = "okay";
-
- pcie at 1,0 {
- status = "okay";
- };
- };
- };
-
ocp at f1000000 {
pinctrl: pin-controller at 10000 {
pinctrl-0 = <&pmx_unknown>;
@@ -138,3 +128,11 @@
};
};
};
+
+&pciec {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-nsa320.dts b/arch/arm/boot/dts/kirkwood-nsa320.dts
index 2a935e94f96f..6ab104b4bb42 100644
--- a/arch/arm/boot/dts/kirkwood-nsa320.dts
+++ b/arch/arm/boot/dts/kirkwood-nsa320.dts
@@ -27,16 +27,6 @@
stdout-path = &uart0;
};
- mbus {
- pcie-controller {
- status = "okay";
-
- pcie at 1,0 {
- status = "okay";
- };
- };
- };
-
ocp at f1000000 {
pinctrl: pin-controller at 10000 {
pinctrl-names = "default";
@@ -222,3 +212,11 @@
phy-handle = <ðphy0>;
};
};
+
+&pciec {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-nsa325.dts b/arch/arm/boot/dts/kirkwood-nsa325.dts
index bc4ec9332387..36c64816bf7f 100644
--- a/arch/arm/boot/dts/kirkwood-nsa325.dts
+++ b/arch/arm/boot/dts/kirkwood-nsa325.dts
@@ -28,16 +28,6 @@
stdout-path = &uart0;
};
- mbus {
- pcie-controller {
- status = "okay";
-
- pcie at 1,0 {
- status = "okay";
- };
- };
- };
-
ocp at f1000000 {
pinctrl: pin-controller at 10000 {
pinctrl-names = "default";
@@ -236,3 +226,10 @@
};
};
+&pciec {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi b/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi
index 5ccc46190079..e09b79ac73fd 100644
--- a/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi
+++ b/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi
@@ -4,16 +4,6 @@
/ {
model = "ZyXEL NSA310";
- mbus {
- pcie-controller {
- status = "okay";
-
- pcie at 1,0 {
- status = "okay";
- };
- };
- };
-
ocp at f1000000 {
pinctrl: pin-controller at 10000 {
@@ -157,3 +147,11 @@
reg = <0x5040000 0x2fc0000>;
};
};
+
+&pciec {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-openrd.dtsi b/arch/arm/boot/dts/kirkwood-openrd.dtsi
index 24f1d30970a0..e4ecab112601 100644
--- a/arch/arm/boot/dts/kirkwood-openrd.dtsi
+++ b/arch/arm/boot/dts/kirkwood-openrd.dtsi
@@ -25,16 +25,6 @@
stdout-path = &uart0;
};
- mbus {
- pcie-controller {
- status = "okay";
-
- pcie at 1,0 {
- status = "okay";
- };
- };
- };
-
ocp at f1000000 {
pinctrl: pin-controller at 10000 {
pinctrl-0 = <&pmx_select28 &pmx_sdio_cd &pmx_select34>;
@@ -125,3 +115,7 @@
reg = <0x0600000 0x1FA00000>;
};
};
+
+&pcie0 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-rd88f6192.dts b/arch/arm/boot/dts/kirkwood-rd88f6192.dts
index e0b959396ca2..b8af907249fb 100644
--- a/arch/arm/boot/dts/kirkwood-rd88f6192.dts
+++ b/arch/arm/boot/dts/kirkwood-rd88f6192.dts
@@ -29,16 +29,6 @@
stdout-path = &uart0;
};
- mbus {
- pcie-controller {
- status = "okay";
-
- pcie at 1,0 {
- status = "okay";
- };
- };
- };
-
ocp at f1000000 {
pinctrl: pin-controller at 10000 {
pinctrl-0 = <&pmx_usb_power>;
@@ -108,4 +98,12 @@
ethernet0-port at 0 {
phy-handle = <ðphy0>;
};
-};
\ No newline at end of file
+};
+
+&pciec {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi b/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi
index 5521426d101b..d5aacf137e40 100644
--- a/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi
+++ b/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi
@@ -25,16 +25,6 @@
stdout-path = &uart0;
};
- mbus {
- pcie-controller {
- status = "okay";
-
- pcie at 1,0 {
- status = "okay";
- };
- };
- };
-
ocp at f1000000 {
pinctrl: pin-controller at 10000 {
pinctrl-names = "default";
@@ -134,3 +124,11 @@
duplex = <1>;
};
};
+
+&pciec {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-rs212.dts b/arch/arm/boot/dts/kirkwood-rs212.dts
index 3b19f1fd4cac..2c722ecd5331 100644
--- a/arch/arm/boot/dts/kirkwood-rs212.dts
+++ b/arch/arm/boot/dts/kirkwood-rs212.dts
@@ -44,6 +44,10 @@
status = "okay";
};
-&pcie2 {
+&pciec {
+ status = "okay";
+};
+
+&pcie1 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/kirkwood-synology.dtsi b/arch/arm/boot/dts/kirkwood-synology.dtsi
index 04015c174b99..65e9524e852a 100644
--- a/arch/arm/boot/dts/kirkwood-synology.dtsi
+++ b/arch/arm/boot/dts/kirkwood-synology.dtsi
@@ -10,20 +10,6 @@
*/
/ {
- mbus {
- pcie-controller {
- status = "okay";
-
- pcie at 1,0 {
- status = "okay";
- };
-
- pcie2: pcie at 2,0 {
- status = "disabled";
- };
- };
- };
-
ocp at f1000000 {
pinctrl: pin-controller at 10000 {
pmx_alarmled_12: pmx-alarmled-12 {
@@ -861,3 +847,11 @@
phy-handle = <ðphy1>;
};
};
+
+&pciec {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-t5325.dts b/arch/arm/boot/dts/kirkwood-t5325.dts
index 860c6d778d47..3500f4738fb0 100644
--- a/arch/arm/boot/dts/kirkwood-t5325.dts
+++ b/arch/arm/boot/dts/kirkwood-t5325.dts
@@ -30,16 +30,6 @@
stdout-path = &uart0;
};
- mbus {
- pcie-controller {
- status = "okay";
-
- pcie at 1,0 {
- status = "okay";
- };
- };
- };
-
ocp at f1000000 {
pinctrl: pin-controller at 10000 {
pinctrl-0 = <&pmx_i2s &pmx_sysrst>;
@@ -229,3 +219,11 @@
phy-handle = <ðphy0>;
};
};
+
+&pciec {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-ts219-6282.dts b/arch/arm/boot/dts/kirkwood-ts219-6282.dts
index 1d291f620869..3437bb396844 100644
--- a/arch/arm/boot/dts/kirkwood-ts219-6282.dts
+++ b/arch/arm/boot/dts/kirkwood-ts219-6282.dts
@@ -5,16 +5,6 @@
#include "kirkwood-ts219.dtsi"
/ {
- mbus {
- pcie-controller {
- status = "okay";
-
- pcie at 2,0 {
- status = "okay";
- };
- };
- };
-
ocp at f1000000 {
pinctrl: pin-controller at 10000 {
@@ -63,3 +53,5 @@
};
ðphy0 { reg = <0>; };
+
+&pcie1 { status = "okay"; };
diff --git a/arch/arm/boot/dts/kirkwood-ts219.dtsi b/arch/arm/boot/dts/kirkwood-ts219.dtsi
index b3f75382cb06..62e5e2d5c348 100644
--- a/arch/arm/boot/dts/kirkwood-ts219.dtsi
+++ b/arch/arm/boot/dts/kirkwood-ts219.dtsi
@@ -12,16 +12,6 @@
stdout-path = &uart0;
};
- mbus {
- pcie-controller {
- status = "okay";
-
- pcie at 1,0 {
- status = "okay";
- };
- };
- };
-
ocp at f1000000 {
i2c at 11000 {
status = "okay";
@@ -105,3 +95,11 @@
phy-handle = <ðphy0>;
};
};
+
+&pciec {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-ts419-6282.dts b/arch/arm/boot/dts/kirkwood-ts419-6282.dts
index d7512d4cdced..e3e71f48acc8 100644
--- a/arch/arm/boot/dts/kirkwood-ts419-6282.dts
+++ b/arch/arm/boot/dts/kirkwood-ts419-6282.dts
@@ -16,17 +16,8 @@
#include "kirkwood-ts219.dtsi"
#include "kirkwood-ts419.dtsi"
-/ {
- mbus {
- pcie-controller {
- status = "okay";
-
- pcie at 2,0 {
- status = "okay";
- };
- };
- };
-};
-
ðphy0 { reg = <0>; };
ðphy1 { reg = <1>; };
+
+&pciec { status = "okay"; };
+&pcie1 { status = "okay"; };
--
2.7.0
next prev parent reply other threads:[~2016-04-03 2:03 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-03 2:03 [PATCH 0/8] Various Kirkwood DT warning fixup Andrew Lunn
2016-04-03 2:03 ` [PATCH 1/8] ARM: kirkwood: DT: Remove button address and fixup names Andrew Lunn
2016-04-03 2:03 ` [PATCH 2/8] ARM: kirkwood: DT: Remove node address from leds Andrew Lunn
2016-04-03 2:03 ` [PATCH 3/8] ARM: kirkwood: DT: Remove address from dsa unit name Andrew Lunn
2016-04-03 2:03 ` [PATCH 4/8] ARM: kirkwood: DT: Add address to ethernet-phy " Andrew Lunn
2016-04-03 2:03 ` Andrew Lunn [this message]
2016-04-03 2:03 ` [PATCH 6/8] ARM: kirkwood: DT: Remove address from gpio-i2c " Andrew Lunn
2016-04-03 2:03 ` [PATCH 7/8] ARM: kirkwood: DT: Add address to mbus " Andrew Lunn
2016-04-03 2:03 ` [PATCH 8/8] ARM: kirkwood: DT: Add address go regulator " Andrew Lunn
2016-04-03 12:02 ` [PATCH 0/8] Various Kirkwood DT warning fixup Gregory CLEMENT
2016-04-03 12:16 ` Gregory CLEMENT
2016-04-03 14:05 ` Andrew Lunn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1459649030-21886-6-git-send-email-andrew@lunn.ch \
--to=andrew@lunn.ch \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.