All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Emilio G. Cota" <cota@braap.org>
To: QEMU Developers <qemu-devel@nongnu.org>,
	MTTCG Devel <mttcg@listserver.greensocs.com>
Cc: "Peter Maydell" <peter.maydell@linaro.org>,
	"Peter Crosthwaite" <crosthwaite.peter@gmail.com>,
	"Sergey Fedorov" <serge.fdrv@gmail.com>,
	"Paolo Bonzini" <pbonzini@redhat.com>,
	"Alex Bennée" <alex.bennee@linaro.org>,
	"Richard Henderson" <rth@twiddle.net>
Subject: [Qemu-devel] [PATCH 07/10] tb hash: hash phys_pc, pc, and flags with xxhash
Date: Tue,  5 Apr 2016 01:30:50 -0400	[thread overview]
Message-ID: <1459834253-8291-8-git-send-email-cota@braap.org> (raw)
In-Reply-To: <1459834253-8291-1-git-send-email-cota@braap.org>

For some workloads such as arm bootup, tb_phys_hash is performance-critical.
The is due to the high frequency of accesses to the hash table, originated
by (frequent) TLB flushes that wipe out the cpu-private tb_jmp_cache's.
More info:
  https://lists.nongnu.org/archive/html/qemu-devel/2016-03/msg05098.html

To dig further into this I modified an arm image booting debian jessie to
immediately shut down after boot. Analysis revealed that quite a bit of time
is unnecessarily spent in tb_phys_hash: the cause is poor hashing that
results in very uneven loading of chains in the hash table's buckets;
the longest observed chain had ~550 elements.

The appended addresses this with two changes:

1) Use xxhash as the hash table's hash function. xxhash is a fast,
   high-quality hashing function.

2) Feed the hashing function with not just tb_phys, but also pc and flags.

This improves performance over using just tb_phys for hashing, since that
resulted in some hash buckets having many TB's, while others getting very few;
with these changes, the longest observed chain on a single hash bucket is
brought down from ~550 to ~40.

Tests show that the other element checked for in tb_find_physical,
cs_base, is always a match when tb_phys+pc+flags are a match,
so hashing cs_base is wasteful. It could be that this is an ARM-only
thing, though.

BTW, after this change the hash table should not be called "tb_hash_phys"
anymore; this is addressed later in this series.

This change gives consistent bootup time improvements. I tested two
host machines:
- Intel Xeon E5-2690: 11.6% less time
- Intel i7-4790K: 19.2% less time

Increasing the number of hash buckets yields further improvements. However,
using a larger, fixed number of buckets can degrade performance for other
workloads that do not translate as many blocks (600K+ for debian-jessie arm
bootup). This is dealt with later in this series.

Signed-off-by: Emilio G. Cota <cota@braap.org>
---
 cpu-exec.c             |  2 +-
 include/exec/tb-hash.h | 19 +++++++++++++++++--
 translate-all.c        |  6 +++---
 3 files changed, 21 insertions(+), 6 deletions(-)

diff --git a/cpu-exec.c b/cpu-exec.c
index bbfcbfb..4194a4a 100644
--- a/cpu-exec.c
+++ b/cpu-exec.c
@@ -233,7 +233,7 @@ static TranslationBlock *tb_find_physical(CPUState *cpu,
     /* find translated block using physical mappings */
     phys_pc = get_page_addr_code(env, pc);
     phys_page1 = phys_pc & TARGET_PAGE_MASK;
-    h = tb_phys_hash_func(phys_pc);
+    h = tb_hash_func(phys_pc, pc, flags);
     ptb1 = &tcg_ctx.tb_ctx.tb_phys_hash[h];
     for(;;) {
         tb = *ptb1;
diff --git a/include/exec/tb-hash.h b/include/exec/tb-hash.h
index 0f4e8a0..c4942e1 100644
--- a/include/exec/tb-hash.h
+++ b/include/exec/tb-hash.h
@@ -20,6 +20,9 @@
 #ifndef EXEC_TB_HASH
 #define EXEC_TB_HASH
 
+#include "exec/exec-all.h"
+#include "qemu/xxhash.h"
+
 /* Only the bottom TB_JMP_PAGE_BITS of the jump cache hash bits vary for
    addresses on the same page.  The top bits are the same.  This allows
    TLB invalidation to quickly clear a subset of the hash table.  */
@@ -43,9 +46,21 @@ static inline unsigned int tb_jmp_cache_hash_func(target_ulong pc)
            | (tmp & TB_JMP_ADDR_MASK));
 }
 
-static inline unsigned int tb_phys_hash_func(tb_page_addr_t pc)
+static inline
+uint32_t tb_hash_func(tb_page_addr_t phys_pc, target_ulong pc, uint64_t flags)
 {
-    return (pc >> 2) & (CODE_GEN_PHYS_HASH_SIZE - 1);
+    struct key {
+        tb_page_addr_t phys_pc;
+        target_ulong pc;
+        uint64_t flags;
+    } QEMU_PACKED k;
+    unsigned int hash;
+
+    k.phys_pc = phys_pc;
+    k.pc = pc;
+    k.flags = flags;
+    hash = qemu_xxh32((uint32_t *)&k, sizeof(k) / sizeof(uint32_t), 1);
+    return hash & (CODE_GEN_PHYS_HASH_SIZE - 1);
 }
 
 #endif
diff --git a/translate-all.c b/translate-all.c
index 8329ea6..8e7f9a7 100644
--- a/translate-all.c
+++ b/translate-all.c
@@ -972,7 +972,7 @@ void tb_phys_invalidate(TranslationBlock *tb, tb_page_addr_t page_addr)
 
     /* remove the TB from the hash list */
     phys_pc = tb->page_addr[0] + (tb->pc & ~TARGET_PAGE_MASK);
-    h = tb_phys_hash_func(phys_pc);
+    h = tb_hash_func(phys_pc, tb->pc, tb->flags);
     tb_hash_remove(&tcg_ctx.tb_ctx.tb_phys_hash[h], tb);
 
     /* remove the TB from the page list */
@@ -1474,8 +1474,8 @@ static void tb_link_page(TranslationBlock *tb, tb_page_addr_t phys_pc,
     unsigned int h;
     TranslationBlock **ptb;
 
-    /* add in the physical hash table */
-    h = tb_phys_hash_func(phys_pc);
+    /* add in the hash table */
+    h = tb_hash_func(phys_pc, tb->pc, tb->flags);
     ptb = &tcg_ctx.tb_ctx.tb_phys_hash[h];
     tb->phys_hash_next = *ptb;
     *ptb = tb;
-- 
2.5.0

  parent reply	other threads:[~2016-04-05  5:31 UTC|newest]

Thread overview: 62+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-04-05  5:30 [Qemu-devel] [PATCH 00/10] tb hash improvements Emilio G. Cota
2016-04-05  5:30 ` [Qemu-devel] [PATCH 01/10] translate-all: add missing fold of tb_ctx into tcg_ctx Emilio G. Cota
2016-04-05  8:49   ` Paolo Bonzini
2016-04-05  5:30 ` [Qemu-devel] [PATCH 02/10] compiler.h: add QEMU_CACHELINE + QEMU_ALIGN() + QEMU_CACHELINE_ALIGNED Emilio G. Cota
2016-04-05  7:57   ` Peter Maydell
2016-04-05 17:24     ` Emilio G. Cota
2016-04-05 18:01       ` Peter Maydell
2016-04-05 19:13         ` Emilio G. Cota
2016-04-05  8:49   ` Paolo Bonzini
2016-04-05 12:57   ` Lluís Vilanova
2016-04-05 12:58     ` Peter Maydell
2016-04-05 15:29       ` Paolo Bonzini
2016-04-05 16:23       ` Lluís Vilanova
2016-04-05 16:31         ` Richard Henderson
2016-04-05 16:56           ` Peter Maydell
2016-04-05 19:02             ` Lluís Vilanova
2016-04-05 19:15               ` Richard Henderson
2016-04-05 20:09                 ` Lluís Vilanova
2016-04-06 11:44                   ` Paolo Bonzini
2016-04-06 12:02                     ` Laurent Desnogues
2016-04-05  5:30 ` [Qemu-devel] [PATCH 03/10] seqlock: remove optional mutex Emilio G. Cota
2016-04-06  8:38   ` Alex Bennée
2016-04-05  5:30 ` [Qemu-devel] [PATCH 04/10] seqlock: rename write_lock/unlock to write_begin/end Emilio G. Cota
2016-04-06  8:42   ` Alex Bennée
2016-04-05  5:30 ` [Qemu-devel] [PATCH 05/10] include: add spinlock wrapper Emilio G. Cota
2016-04-05  8:51   ` Paolo Bonzini
2016-04-06 15:51     ` Alex Bennée
2016-04-05  5:30 ` [Qemu-devel] [PATCH 06/10] include: add xxhash.h Emilio G. Cota
2016-04-06 11:39   ` Alex Bennée
2016-04-06 22:59     ` Emilio G. Cota
2016-04-05  5:30 ` Emilio G. Cota [this message]
2016-04-05 15:41   ` [Qemu-devel] [PATCH 07/10] tb hash: hash phys_pc, pc, and flags with xxhash Richard Henderson
2016-04-05 15:48     ` Paolo Bonzini
2016-04-05 16:07       ` Richard Henderson
2016-04-05 19:40         ` Emilio G. Cota
2016-04-05 21:08           ` Richard Henderson
2016-04-06  0:52             ` Emilio G. Cota
2016-04-06 11:52               ` Paolo Bonzini
2016-04-06 17:44                 ` Emilio G. Cota
2016-04-06 18:23                   ` Paolo Bonzini
2016-04-06 18:27                     ` Richard Henderson
2016-04-07  0:37                     ` Emilio G. Cota
2016-04-07  8:46                       ` Paolo Bonzini
2016-04-05 16:33     ` Laurent Desnogues
2016-04-05 17:19       ` Richard Henderson
2016-04-06  6:06         ` Laurent Desnogues
2016-04-06 17:32           ` Emilio G. Cota
2016-04-06 17:42             ` Richard Henderson
2016-04-07  8:12               ` Laurent Desnogues
2016-04-05  5:30 ` [Qemu-devel] [PATCH 08/10] qht: QEMU's fast, resizable and scalable Hash Table Emilio G. Cota
2016-04-05  9:01   ` Paolo Bonzini
2016-04-05 15:50   ` Richard Henderson
2016-04-08 10:27   ` Alex Bennée
2016-04-19 23:03     ` Emilio G. Cota
2016-04-05  5:30 ` [Qemu-devel] [PATCH 09/10] qht: add test program Emilio G. Cota
2016-04-08 10:45   ` Alex Bennée
2016-04-19 23:06     ` Emilio G. Cota
2016-04-20  7:50       ` Alex Bennée
2016-04-05  5:30 ` [Qemu-devel] [PATCH 10/10] tb hash: track translated blocks with qht Emilio G. Cota
2016-04-08 12:39   ` Alex Bennée
2016-04-05  8:47 ` [Qemu-devel] [PATCH 00/10] tb hash improvements Alex Bennée
2016-04-05  9:01 ` Paolo Bonzini

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1459834253-8291-8-git-send-email-cota@braap.org \
    --to=cota@braap.org \
    --cc=alex.bennee@linaro.org \
    --cc=crosthwaite.peter@gmail.com \
    --cc=mttcg@listserver.greensocs.com \
    --cc=pbonzini@redhat.com \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    --cc=rth@twiddle.net \
    --cc=serge.fdrv@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.