From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932914AbcDHUM2 (ORCPT ); Fri, 8 Apr 2016 16:12:28 -0400 Received: from g2t4621.austin.hp.com ([15.73.212.80]:33205 "EHLO g2t4621.austin.hp.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1758800AbcDHUM1 (ORCPT ); Fri, 8 Apr 2016 16:12:27 -0400 From: Waiman Long To: Thomas Gleixner , Ingo Molnar , "H. Peter Anvin" , Jonathan Corbet Cc: linux-kernel@vger.kernel.org, linux-doc@kernel.org, x86@kernel.org, Jiang Liu , Borislav Petkov , Andy Lutomirski , Scott J Norton , Douglas Hatch , Randy Wright , Waiman Long Subject: [PATCH v2] x86/hpet: Reduce HPET counter read contention Date: Fri, 8 Apr 2016 16:11:45 -0400 Message-Id: <1460146305-14666-1-git-send-email-Waiman.Long@hpe.com> X-Mailer: git-send-email 1.7.1 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On a large system with many CPUs, using HPET as the clock source can have a significant impact on the overall system performance because of the following reasons: 1) There is a single HPET counter shared by all the CPUs. 2) HPET counter reading is a very slow operation. Using HPET as the default clock source may happen when, for example, the TSC clock calibration exceeds the allowable tolerance. Something the performance slowdown can be so severe that the system may crash because of a NMI watchdog soft lockup, for example. This patch attempts to reduce HPET read contention by using the fact that if more than one task are trying to access HPET at the same time, it will be more efficient if one task in the group reads the HPET counter and shares it with the rest of the group instead of each group member reads the HPET counter individually. This is done by using a combination word with a sequence number and a bit lock. The task that gets the bit lock will be responsible for reading the HPET counter and update the sequence number. The others will monitor the change in sequence number and grab the HPET counter accordingly. On a 4-socket Haswell-EX box with 72 cores (HT off), running the AIM7 compute workload (1500 users) on a 4.6-rc1 kernel (HZ=1000) with and without the patch has the following performance numbers (with HPET or TSC as clock source): TSC = 646515 jobs/min HPET w/o patch = 566708 jobs/min HPET with patch = 638791 jobs/min The perf profile showed a reduction of the %CPU time consumed by read_hpet from 4.99% without patch to 1.41% with patch. On a 16-socket IvyBridge-EX system with 240 cores (HT on), on the other hand, the performance numbers of the same benchmark were: TSC = 3145329 jobs/min HPET w/o patch = 1108537 jobs/min HPET with patch = 3019934 jobs/min The corresponding perf profile showed a drop of CPU consumption of the read_hpet function from more than 34% to just 2.96%. This optimization is enabled on systems with more than 32 CPUs. It can also be explicitly enabled or disabled by using the new opt_read_hpet kernel parameter. Signed-off-by: Waiman Long --- v1->v2: - Reduce the CPU threshold to 32. - Add a kernel parameter to explicitly enable or disable hpet optimization. - Change hpet_save.hpet type to u32 to make sure that read & write is atomic on i386. Documentation/kernel-parameters.txt | 4 + arch/x86/kernel/hpet.c | 119 ++++++++++++++++++++++++++++++++++- 2 files changed, 122 insertions(+), 1 deletions(-) diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index ecc74fa..9424c75 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -2300,6 +2300,10 @@ bytes respectively. Such letter suffixes can also be entirely omitted. lock - Configure if Flex-OneNAND boundary should be locked. Once locked, the boundary cannot be changed. 1 indicates lock status, 0 indicates unlock status. + opt_read_hpet= [X86] + 0 to disable read_hpet optimization + 1 to enable read_hpet optimization + See arch/x86/kernel/hpet.c. mtdset= [ARM] ARM/S3C2412 JIVE boot control diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c index a1f0e4a..d0933fd 100644 --- a/arch/x86/kernel/hpet.c +++ b/arch/x86/kernel/hpet.c @@ -759,11 +759,121 @@ static int hpet_cpuhp_notify(struct notifier_block *n, #endif /* + * Reading the HPET counter is a very slow operation. If a large number of + * CPUs are trying to access the HPET counter simultaneously, it can cause + * massive delay and slow down system performance dramatically. This may + * happen when HPET is the default clock source instead of TSC. For a + * really large system with hundreds of CPUs, the slowdown may be so + * severe that it may actually crash the system because of a NMI watchdog + * soft lockup, for example. + * + * If multiple CPUs are trying to access the HPET counter at the same time, + * we don't actually need to read the counter multiple times. Instead, the + * other CPUs can use the counter value read by the first CPU in the group. + * + * A sequence number whose lsb is a lock bit is used to control which CPU + * has the right to read the HPET counter directly and which CPUs are going + * to get the indirect value read by the lock holder. For the later group, + * if the sequence number differs from the expected locked value, they + * can assume that the saved HPET value is up-to-date and return it. + * + * This mechanism is automatically activated on system with a large number + * of CPUs (> 32). It can also be explicitly enabled or disabled by using + * the "opt_read_hpet=1" or "opt_read_hpet=0" kernel command line options + * respectively which overrides the CPU number check. + */ +static int opt_read_hpet __read_mostly = -1; /* Optimize read_hpet() */ +static struct { + /* Sequence number + bit lock */ + int seq ____cacheline_aligned_in_smp; + + /* Current HPET value */ + u32 hpet ____cacheline_aligned_in_smp; +} hpet_save; +#define HPET_SEQ_LOCKED(seq) ((seq) & 1) /* Odd == locked */ +#define HPET_RESET_THRESHOLD (1 << 14) +#define HPET_REUSE_THRESHOLD 32 + +static int __init get_read_hpet_opt(char *str) +{ + get_option(&str, &opt_read_hpet); + return 0; +} +early_param("opt_read_hpet", get_read_hpet_opt); + +/* * Clock source related code */ static cycle_t read_hpet(struct clocksource *cs) { - return (cycle_t)hpet_readl(HPET_COUNTER); + int seq, cnt = 0; + u32 time; + + if (opt_read_hpet <= 0) + return (cycle_t)hpet_readl(HPET_COUNTER); + + seq = READ_ONCE(hpet_save.seq); + if (!HPET_SEQ_LOCKED(seq)) { + int old, new = seq + 1; + unsigned long flags; + + local_irq_save(flags); + /* + * Set the lock bit (lsb) to get the right to read HPET + * counter directly. If successful, read the counter, save + * its value, and increment the sequence number. Otherwise, + * increment the sequnce number to the expected locked value + * for comparison later on. + */ + old = cmpxchg(&hpet_save.seq, seq, new); + if (old == seq) { + time = hpet_readl(HPET_COUNTER); + WRITE_ONCE(hpet_save.hpet, time); + + /* Unlock */ + smp_store_release(&hpet_save.seq, new + 1); + local_irq_restore(flags); + return (cycle_t)time; + } + local_irq_restore(flags); + seq = new; + } + + /* + * Wait until the locked sequence number changes which indicates + * that the saved HPET value is up-to-date. + */ + while (READ_ONCE(hpet_save.seq) == seq) { + /* + * Since reading the HPET is much slower than a single + * cpu_relax() instruction, we use two here in an attempt + * to reduce the amount of cacheline contention in the + * hpet_save.seq cacheline. + */ + cpu_relax(); + cpu_relax(); + + if (likely(++cnt <= HPET_RESET_THRESHOLD)) + continue; + + /* + * In the unlikely event that it takes too long for the lock + * holder to read the HPET, we do it ourselves and try to + * reset the lock. This will also break a deadlock if it + * happens, for example, when the process context lock holder + * gets killed in the middle of reading the HPET counter. + */ + time = hpet_readl(HPET_COUNTER); + WRITE_ONCE(hpet_save.hpet, time); + if (READ_ONCE(hpet_save.seq) == seq) { + if (cmpxchg(&hpet_save.seq, seq, seq + 1) == seq) + pr_warn("read_hpet: reset hpet seq to 0x%x\n", + seq + 1); + } + return (cycle_t)time; + } + + return (cycle_t)READ_ONCE(hpet_save.hpet); } static struct clocksource clocksource_hpet = { @@ -956,6 +1066,13 @@ static __init int hpet_late_init(void) hpet_reserve_platform_timers(hpet_readl(HPET_ID)); hpet_print_config(); + /* + * Reuse HPET value read by other CPUs if there are more than + * HPET_REUSE_THRESHOLD CPUs in the system. + */ + if ((opt_read_hpet < 0) && (num_possible_cpus() > HPET_REUSE_THRESHOLD)) + opt_read_hpet = 1; + if (hpet_msi_disable) return 0; -- 1.7.1