All of lore.kernel.org
 help / color / mirror / Atom feed
From: Paolo Bonzini <pbonzini@redhat.com>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PATCH 06/50] target-arm: make cpu-qom.h not target specific
Date: Fri,  8 Apr 2016 22:28:26 +0200	[thread overview]
Message-ID: <1460147350-7601-7-git-send-email-pbonzini@redhat.com> (raw)
In-Reply-To: <1460147350-7601-1-git-send-email-pbonzini@redhat.com>

Make ARMCPU an opaque type within cpu-qom.h, and move all definitions of
private methods, as well as all type definitions that require knowledge
of the layout to cpu.h.  This helps making files independent of NEED_CPU_H
if they only need to pass around CPU pointers.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
 target-arm/cpu-qom.h | 178 +-------------------------------------------------
 target-arm/cpu.h     | 179 ++++++++++++++++++++++++++++++++++++++++++++++++++-
 2 files changed, 179 insertions(+), 178 deletions(-)

diff --git a/target-arm/cpu-qom.h b/target-arm/cpu-qom.h
index 1061c08..3991173 100644
--- a/target-arm/cpu-qom.h
+++ b/target-arm/cpu-qom.h
@@ -22,6 +22,8 @@
 
 #include "qom/cpu.h"
 
+struct arm_boot_info;
+
 #define TYPE_ARM_CPU "arm-cpu"
 
 #define ARM_CPU_CLASS(klass) \
@@ -47,145 +49,7 @@ typedef struct ARMCPUClass {
     void (*parent_reset)(CPUState *cpu);
 } ARMCPUClass;
 
-/**
- * ARMCPU:
- * @env: #CPUARMState
- *
- * An ARM CPU core.
- */
-typedef struct ARMCPU {
-    /*< private >*/
-    CPUState parent_obj;
-    /*< public >*/
-
-    CPUARMState env;
-
-    /* Coprocessor information */
-    GHashTable *cp_regs;
-    /* For marshalling (mostly coprocessor) register state between the
-     * kernel and QEMU (for KVM) and between two QEMUs (for migration),
-     * we use these arrays.
-     */
-    /* List of register indexes managed via these arrays; (full KVM style
-     * 64 bit indexes, not CPRegInfo 32 bit indexes)
-     */
-    uint64_t *cpreg_indexes;
-    /* Values of the registers (cpreg_indexes[i]'s value is cpreg_values[i]) */
-    uint64_t *cpreg_values;
-    /* Length of the indexes, values, reset_values arrays */
-    int32_t cpreg_array_len;
-    /* These are used only for migration: incoming data arrives in
-     * these fields and is sanity checked in post_load before copying
-     * to the working data structures above.
-     */
-    uint64_t *cpreg_vmstate_indexes;
-    uint64_t *cpreg_vmstate_values;
-    int32_t cpreg_vmstate_array_len;
-
-    /* Timers used by the generic (architected) timer */
-    QEMUTimer *gt_timer[NUM_GTIMERS];
-    /* GPIO outputs for generic timer */
-    qemu_irq gt_timer_outputs[NUM_GTIMERS];
-
-    /* MemoryRegion to use for secure physical accesses */
-    MemoryRegion *secure_memory;
-
-    /* 'compatible' string for this CPU for Linux device trees */
-    const char *dtb_compatible;
-
-    /* PSCI version for this CPU
-     * Bits[31:16] = Major Version
-     * Bits[15:0] = Minor Version
-     */
-    uint32_t psci_version;
-
-    /* Should CPU start in PSCI powered-off state? */
-    bool start_powered_off;
-    /* CPU currently in PSCI powered-off state */
-    bool powered_off;
-    /* CPU has security extension */
-    bool has_el3;
-
-    /* CPU has memory protection unit */
-    bool has_mpu;
-    /* PMSAv7 MPU number of supported regions */
-    uint32_t pmsav7_dregion;
-
-    /* PSCI conduit used to invoke PSCI methods
-     * 0 - disabled, 1 - smc, 2 - hvc
-     */
-    uint32_t psci_conduit;
-
-    /* [QEMU_]KVM_ARM_TARGET_* constant for this CPU, or
-     * QEMU_KVM_ARM_TARGET_NONE if the kernel doesn't support this CPU type.
-     */
-    uint32_t kvm_target;
-
-    /* KVM init features for this CPU */
-    uint32_t kvm_init_features[7];
-
-    /* Uniprocessor system with MP extensions */
-    bool mp_is_up;
-
-    /* The instance init functions for implementation-specific subclasses
-     * set these fields to specify the implementation-dependent values of
-     * various constant registers and reset values of non-constant
-     * registers.
-     * Some of these might become QOM properties eventually.
-     * Field names match the official register names as defined in the
-     * ARMv7AR ARM Architecture Reference Manual. A reset_ prefix
-     * is used for reset values of non-constant registers; no reset_
-     * prefix means a constant register.
-     */
-    uint32_t midr;
-    uint32_t revidr;
-    uint32_t reset_fpsid;
-    uint32_t mvfr0;
-    uint32_t mvfr1;
-    uint32_t mvfr2;
-    uint32_t ctr;
-    uint32_t reset_sctlr;
-    uint32_t id_pfr0;
-    uint32_t id_pfr1;
-    uint32_t id_dfr0;
-    uint32_t pmceid0;
-    uint32_t pmceid1;
-    uint32_t id_afr0;
-    uint32_t id_mmfr0;
-    uint32_t id_mmfr1;
-    uint32_t id_mmfr2;
-    uint32_t id_mmfr3;
-    uint32_t id_mmfr4;
-    uint32_t id_isar0;
-    uint32_t id_isar1;
-    uint32_t id_isar2;
-    uint32_t id_isar3;
-    uint32_t id_isar4;
-    uint32_t id_isar5;
-    uint64_t id_aa64pfr0;
-    uint64_t id_aa64pfr1;
-    uint64_t id_aa64dfr0;
-    uint64_t id_aa64dfr1;
-    uint64_t id_aa64afr0;
-    uint64_t id_aa64afr1;
-    uint64_t id_aa64isar0;
-    uint64_t id_aa64isar1;
-    uint64_t id_aa64mmfr0;
-    uint64_t id_aa64mmfr1;
-    uint32_t dbgdidr;
-    uint32_t clidr;
-    uint64_t mp_affinity; /* MP ID without feature bits */
-    /* The elements of this array are the CCSIDR values for each cache,
-     * in the order L1DCache, L1ICache, L2DCache, L2ICache, etc.
-     */
-    uint32_t ccsidr[16];
-    uint64_t reset_cbar;
-    uint32_t reset_auxcr;
-    bool reset_hivecs;
-    /* DCZ blocksize, in log_2(words), ie low 4 bits of DCZID_EL0 */
-    uint32_t dcz_blocksize;
-    uint64_t rvbar;
-} ARMCPU;
+typedef struct ARMCPU ARMCPU;
 
 #define TYPE_AARCH64_CPU "aarch64-cpu"
 #define AARCH64_CPU_CLASS(klass) \
@@ -199,40 +63,9 @@ typedef struct AArch64CPUClass {
     /*< public >*/
 } AArch64CPUClass;
 
-static inline ARMCPU *arm_env_get_cpu(CPUARMState *env)
-{
-    return container_of(env, ARMCPU, env);
-}
-
-#define ENV_GET_CPU(e) CPU(arm_env_get_cpu(e))
-
-#define ENV_OFFSET offsetof(ARMCPU, env)
-
-#ifndef CONFIG_USER_ONLY
-extern const struct VMStateDescription vmstate_arm_cpu;
-#endif
-
 void register_cp_regs_for_features(ARMCPU *cpu);
 void init_cpreg_list(ARMCPU *cpu);
 
-void arm_cpu_do_interrupt(CPUState *cpu);
-void arm_v7m_cpu_do_interrupt(CPUState *cpu);
-bool arm_cpu_exec_interrupt(CPUState *cpu, int int_req);
-
-void arm_cpu_dump_state(CPUState *cs, FILE *f, fprintf_function cpu_fprintf,
-                        int flags);
-
-hwaddr arm_cpu_get_phys_page_attrs_debug(CPUState *cpu, vaddr addr,
-                                         MemTxAttrs *attrs);
-
-int arm_cpu_gdb_read_register(CPUState *cpu, uint8_t *buf, int reg);
-int arm_cpu_gdb_write_register(CPUState *cpu, uint8_t *buf, int reg);
-
-int arm_cpu_write_elf64_note(WriteCoreDumpFunction f, CPUState *cs,
-                             int cpuid, void *opaque);
-int arm_cpu_write_elf32_note(WriteCoreDumpFunction f, CPUState *cs,
-                             int cpuid, void *opaque);
-
 /* Callback functions for the generic timer's timers. */
 void arm_gt_ptimer_cb(void *opaque);
 void arm_gt_vtimer_cb(void *opaque);
@@ -252,9 +85,4 @@ void arm_gt_stimer_cb(void *opaque);
 #define ARM64_AFFINITY_MASK \
     (ARM_AFF0_MASK|ARM_AFF1_MASK|ARM_AFF2_MASK|ARM_AFF3_MASK)
 
-#ifdef TARGET_AARCH64
-int aarch64_cpu_gdb_read_register(CPUState *cpu, uint8_t *buf, int reg);
-int aarch64_cpu_gdb_write_register(CPUState *cpu, uint8_t *buf, int reg);
-#endif
-
 #endif
diff --git a/target-arm/cpu.h b/target-arm/cpu.h
index 066ff67..bf6904c 100644
--- a/target-arm/cpu.h
+++ b/target-arm/cpu.h
@@ -34,6 +34,7 @@
 #define CPUArchState struct CPUARMState
 
 #include "qemu-common.h"
+#include "cpu-qom.h"
 #include "exec/cpu-defs.h"
 
 #include "fpu/softfloat.h"
@@ -91,8 +92,6 @@
 #define ARM_CPU_VIRQ 2
 #define ARM_CPU_VFIQ 3
 
-struct arm_boot_info;
-
 #define NB_MMU_MODES 7
 #define TARGET_INSN_START_EXTRA_WORDS 1
 
@@ -504,7 +503,181 @@ typedef struct CPUARMState {
     const struct arm_boot_info *boot_info;
 } CPUARMState;
 
-#include "cpu-qom.h"
+/**
+ * ARMCPU:
+ * @env: #CPUARMState
+ *
+ * An ARM CPU core.
+ */
+struct ARMCPU {
+    /*< private >*/
+    CPUState parent_obj;
+    /*< public >*/
+
+    CPUARMState env;
+
+    /* Coprocessor information */
+    GHashTable *cp_regs;
+    /* For marshalling (mostly coprocessor) register state between the
+     * kernel and QEMU (for KVM) and between two QEMUs (for migration),
+     * we use these arrays.
+     */
+    /* List of register indexes managed via these arrays; (full KVM style
+     * 64 bit indexes, not CPRegInfo 32 bit indexes)
+     */
+    uint64_t *cpreg_indexes;
+    /* Values of the registers (cpreg_indexes[i]'s value is cpreg_values[i]) */
+    uint64_t *cpreg_values;
+    /* Length of the indexes, values, reset_values arrays */
+    int32_t cpreg_array_len;
+    /* These are used only for migration: incoming data arrives in
+     * these fields and is sanity checked in post_load before copying
+     * to the working data structures above.
+     */
+    uint64_t *cpreg_vmstate_indexes;
+    uint64_t *cpreg_vmstate_values;
+    int32_t cpreg_vmstate_array_len;
+
+    /* Timers used by the generic (architected) timer */
+    QEMUTimer *gt_timer[NUM_GTIMERS];
+    /* GPIO outputs for generic timer */
+    qemu_irq gt_timer_outputs[NUM_GTIMERS];
+
+    /* MemoryRegion to use for secure physical accesses */
+    MemoryRegion *secure_memory;
+
+    /* 'compatible' string for this CPU for Linux device trees */
+    const char *dtb_compatible;
+
+    /* PSCI version for this CPU
+     * Bits[31:16] = Major Version
+     * Bits[15:0] = Minor Version
+     */
+    uint32_t psci_version;
+
+    /* Should CPU start in PSCI powered-off state? */
+    bool start_powered_off;
+    /* CPU currently in PSCI powered-off state */
+    bool powered_off;
+    /* CPU has security extension */
+    bool has_el3;
+
+    /* CPU has memory protection unit */
+    bool has_mpu;
+    /* PMSAv7 MPU number of supported regions */
+    uint32_t pmsav7_dregion;
+
+    /* PSCI conduit used to invoke PSCI methods
+     * 0 - disabled, 1 - smc, 2 - hvc
+     */
+    uint32_t psci_conduit;
+
+    /* [QEMU_]KVM_ARM_TARGET_* constant for this CPU, or
+     * QEMU_KVM_ARM_TARGET_NONE if the kernel doesn't support this CPU type.
+     */
+    uint32_t kvm_target;
+
+    /* KVM init features for this CPU */
+    uint32_t kvm_init_features[7];
+
+    /* Uniprocessor system with MP extensions */
+    bool mp_is_up;
+
+    /* The instance init functions for implementation-specific subclasses
+     * set these fields to specify the implementation-dependent values of
+     * various constant registers and reset values of non-constant
+     * registers.
+     * Some of these might become QOM properties eventually.
+     * Field names match the official register names as defined in the
+     * ARMv7AR ARM Architecture Reference Manual. A reset_ prefix
+     * is used for reset values of non-constant registers; no reset_
+     * prefix means a constant register.
+     */
+    uint32_t midr;
+    uint32_t revidr;
+    uint32_t reset_fpsid;
+    uint32_t mvfr0;
+    uint32_t mvfr1;
+    uint32_t mvfr2;
+    uint32_t ctr;
+    uint32_t reset_sctlr;
+    uint32_t id_pfr0;
+    uint32_t id_pfr1;
+    uint32_t id_dfr0;
+    uint32_t pmceid0;
+    uint32_t pmceid1;
+    uint32_t id_afr0;
+    uint32_t id_mmfr0;
+    uint32_t id_mmfr1;
+    uint32_t id_mmfr2;
+    uint32_t id_mmfr3;
+    uint32_t id_mmfr4;
+    uint32_t id_isar0;
+    uint32_t id_isar1;
+    uint32_t id_isar2;
+    uint32_t id_isar3;
+    uint32_t id_isar4;
+    uint32_t id_isar5;
+    uint64_t id_aa64pfr0;
+    uint64_t id_aa64pfr1;
+    uint64_t id_aa64dfr0;
+    uint64_t id_aa64dfr1;
+    uint64_t id_aa64afr0;
+    uint64_t id_aa64afr1;
+    uint64_t id_aa64isar0;
+    uint64_t id_aa64isar1;
+    uint64_t id_aa64mmfr0;
+    uint64_t id_aa64mmfr1;
+    uint32_t dbgdidr;
+    uint32_t clidr;
+    uint64_t mp_affinity; /* MP ID without feature bits */
+    /* The elements of this array are the CCSIDR values for each cache,
+     * in the order L1DCache, L1ICache, L2DCache, L2ICache, etc.
+     */
+    uint32_t ccsidr[16];
+    uint64_t reset_cbar;
+    uint32_t reset_auxcr;
+    bool reset_hivecs;
+    /* DCZ blocksize, in log_2(words), ie low 4 bits of DCZID_EL0 */
+    uint32_t dcz_blocksize;
+    uint64_t rvbar;
+};
+
+static inline ARMCPU *arm_env_get_cpu(CPUARMState *env)
+{
+    return container_of(env, ARMCPU, env);
+}
+
+#define ENV_GET_CPU(e) CPU(arm_env_get_cpu(e))
+
+#define ENV_OFFSET offsetof(ARMCPU, env)
+
+#ifndef CONFIG_USER_ONLY
+extern const struct VMStateDescription vmstate_arm_cpu;
+#endif
+
+void arm_cpu_do_interrupt(CPUState *cpu);
+void arm_v7m_cpu_do_interrupt(CPUState *cpu);
+bool arm_cpu_exec_interrupt(CPUState *cpu, int int_req);
+
+void arm_cpu_dump_state(CPUState *cs, FILE *f, fprintf_function cpu_fprintf,
+                        int flags);
+
+hwaddr arm_cpu_get_phys_page_attrs_debug(CPUState *cpu, vaddr addr,
+                                         MemTxAttrs *attrs);
+
+int arm_cpu_gdb_read_register(CPUState *cpu, uint8_t *buf, int reg);
+int arm_cpu_gdb_write_register(CPUState *cpu, uint8_t *buf, int reg);
+
+int arm_cpu_write_elf64_note(WriteCoreDumpFunction f, CPUState *cs,
+                             int cpuid, void *opaque);
+int arm_cpu_write_elf32_note(WriteCoreDumpFunction f, CPUState *cs,
+                             int cpuid, void *opaque);
+
+#ifdef TARGET_AARCH64
+int aarch64_cpu_gdb_read_register(CPUState *cpu, uint8_t *buf, int reg);
+int aarch64_cpu_gdb_write_register(CPUState *cpu, uint8_t *buf, int reg);
+#endif
 
 ARMCPU *cpu_arm_init(const char *cpu_model);
 int cpu_arm_exec(CPUState *cpu);
-- 
1.8.3.1

  parent reply	other threads:[~2016-04-08 20:29 UTC|newest]

Thread overview: 72+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-04-08 20:28 [Qemu-devel] [PATCH for-2.7 00/49] NEED_CPU_H / cpu.h / hw/hw.h cleanups Paolo Bonzini
2016-04-08 20:28 ` [Qemu-devel] [PATCH 01/50] scripts: add script to build QEMU and analyze inclusions Paolo Bonzini
2016-04-18 13:10   ` Markus Armbruster
2016-05-09 10:07     ` Paolo Bonzini
2016-04-20 19:47   ` Alex Bennée
2016-05-09  9:39     ` Paolo Bonzini
2016-04-08 20:28 ` [Qemu-devel] [PATCH 02/50] include: move CPU-related definitions out of qemu-common.h Paolo Bonzini
2016-04-21  7:53   ` Alex Bennée
2016-04-08 20:28 ` [Qemu-devel] [PATCH 03/50] log: do not use CONFIG_USER_ONLY Paolo Bonzini
2016-04-21 10:20   ` Alex Bennée
2016-04-08 20:28 ` [Qemu-devel] [PATCH 04/50] cpu: make cpu-qom.h only include-able from cpu.h Paolo Bonzini
2016-04-21 10:26   ` Alex Bennée
2016-04-08 20:28 ` [Qemu-devel] [PATCH 05/50] target-alpha: make cpu-qom.h not target specific Paolo Bonzini
2016-04-08 20:28 ` Paolo Bonzini [this message]
2016-04-21 10:29   ` [Qemu-devel] [PATCH 06/50] target-arm: " Alex Bennée
2016-04-08 20:28 ` [Qemu-devel] [PATCH 07/50] target-cris: " Paolo Bonzini
2016-04-08 20:28 ` [Qemu-devel] [PATCH 08/50] target-i386: " Paolo Bonzini
2016-04-08 20:28 ` [Qemu-devel] [PATCH 09/50] target-lm32: " Paolo Bonzini
2016-04-08 20:28 ` [Qemu-devel] [PATCH 10/50] target-m68k: " Paolo Bonzini
2016-04-08 20:28 ` [Qemu-devel] [PATCH 11/50] target-microblaze: " Paolo Bonzini
2016-04-08 20:28 ` [Qemu-devel] [PATCH 12/50] target-mips: " Paolo Bonzini
2016-04-08 20:28 ` [Qemu-devel] [PATCH 13/50] target-ppc: do not use target_ulong in cpu-qom.h Paolo Bonzini
2016-04-18 13:46   ` Markus Armbruster
2016-04-08 20:28 ` [Qemu-devel] [PATCH 14/50] target-ppc: make cpu-qom.h not target specific Paolo Bonzini
2016-04-08 20:28 ` [Qemu-devel] [PATCH 15/50] target-s390x: " Paolo Bonzini
2016-04-08 20:28 ` [Qemu-devel] [PATCH 16/50] target-sh4: " Paolo Bonzini
2016-04-08 20:28 ` [Qemu-devel] [PATCH 17/50] target-sparc: " Paolo Bonzini
2016-04-08 20:28 ` [Qemu-devel] [PATCH 18/50] target-tricore: " Paolo Bonzini
2016-04-08 20:28 ` [Qemu-devel] [PATCH 19/50] target-unicore32: " Paolo Bonzini
2016-04-08 20:28 ` [Qemu-devel] [PATCH 20/50] target-xtensa: " Paolo Bonzini
2016-04-08 20:28 ` [Qemu-devel] [PATCH 21/50] arm: include cpu-qom.h in files that require ARMCPU Paolo Bonzini
2016-04-08 20:28 ` [Qemu-devel] [PATCH 22/50] m68k: include cpu-qom.h in files that require M68KCPU Paolo Bonzini
2016-04-08 20:28 ` [Qemu-devel] [PATCH 23/50] sh4: include cpu-qom.h in files that require SuperHCPU Paolo Bonzini
2016-04-08 20:28 ` [Qemu-devel] [PATCH 24/50] alpha: include cpu-qom.h in files that require AlphaCPU Paolo Bonzini
2016-04-08 20:28 ` [Qemu-devel] [PATCH 25/50] mips: use MIPSCPU instead of CPUMIPSState Paolo Bonzini
2016-04-08 20:28 ` [Qemu-devel] [PATCH 26/50] ppc: use PowerPCCPU instead of CPUPPCState Paolo Bonzini
2016-04-08 20:28 ` [Qemu-devel] [PATCH 27/50] arm: remove useless cpu.h inclusion Paolo Bonzini
2016-04-08 20:28 ` [Qemu-devel] [PATCH 28/50] explicitly include qom/cpu.h Paolo Bonzini
2016-04-08 20:28 ` [Qemu-devel] [PATCH 29/50] explicitly include hw/qdev-core.h Paolo Bonzini
2016-04-08 20:28 ` [Qemu-devel] [PATCH 30/50] explicitly include linux/kvm.h Paolo Bonzini
2016-04-08 20:28 ` [Qemu-devel] [PATCH 31/50] apic: move target-dependent definitions to cpu.h Paolo Bonzini
2016-04-08 20:28 ` [Qemu-devel] [PATCH 32/50] include: poison symbols in osdep.h Paolo Bonzini
2016-04-08 20:28 ` [Qemu-devel] [PATCH 33/50] hw: do not use VMSTATE_*TL Paolo Bonzini
2016-04-08 20:28 ` [Qemu-devel] [PATCH 34/50] hw: move CPU state serialization to migration/cpu.h Paolo Bonzini
2016-04-08 20:28 ` [Qemu-devel] [PATCH 35/50] hw: cannot include hw/hw.h from user emulation Paolo Bonzini
2016-04-08 20:28 ` [Qemu-devel] [PATCH 36/50] cpu: move endian-dependent load/store functions to cpu-all.h Paolo Bonzini
2016-04-08 20:28 ` [Qemu-devel] [PATCH 37/50] qemu-common: stop including qemu/bswap.h from qemu-common.h Paolo Bonzini
2016-04-08 20:28 ` [Qemu-devel] [PATCH 38/50] qemu-common: stop including qemu/host-utils.h " Paolo Bonzini
2016-04-21 10:46   ` Alex Bennée
2016-05-09  9:39     ` Paolo Bonzini
2016-04-08 20:28 ` [Qemu-devel] [PATCH 39/50] gdbstub: remove includes from gdbstub-xml.c Paolo Bonzini
2016-04-18 13:54   ` Markus Armbruster
2016-04-18 14:12     ` Peter Maydell
2016-04-08 20:29 ` [Qemu-devel] [PATCH 40/50] dma: do not depend on kvm_enabled() Paolo Bonzini
2016-04-08 20:29 ` [Qemu-devel] [PATCH 41/50] s390x: move stuff out of cpu.h Paolo Bonzini
2016-04-11  8:24   ` Cornelia Huck
2016-05-09  9:43     ` Paolo Bonzini
2016-04-08 20:29 ` [Qemu-devel] [PATCH 42/50] acpi: do not use TARGET_PAGE_SIZE Paolo Bonzini
2016-04-08 20:29 ` [Qemu-devel] [PATCH 43/50] qemu-common: push cpu.h inclusion out of qemu-common.h Paolo Bonzini
2016-04-08 20:29 ` [Qemu-devel] [PATCH 44/50] arm: move arm_log_exception into .c file Paolo Bonzini
2016-04-21 10:48   ` Alex Bennée
2016-04-08 20:29 ` [Qemu-devel] [PATCH 45/50] mips: move CP0 functions out of cpu.h Paolo Bonzini
2016-04-08 20:29 ` [Qemu-devel] [PATCH 46/50] hw: explicitly include qemu/log.h Paolo Bonzini
2016-04-20 18:30   ` Alex Bennée
2016-04-08 20:29 ` [Qemu-devel] [PATCH 47/50] exec: extract exec/tb-context.h Paolo Bonzini
2016-04-08 20:29 ` [Qemu-devel] [PATCH 48/50] cpu: move exec-all.h inclusion out of cpu.h Paolo Bonzini
2016-04-08 20:29 ` [Qemu-devel] [PATCH 49/50] hw: remove pio_addr_t Paolo Bonzini
2016-04-18 14:01   ` Markus Armbruster
2016-04-08 20:29 ` [Qemu-devel] [PATCH 50/50] hw: clean up hw/hw.h includes Paolo Bonzini
2016-04-18  8:42 ` [Qemu-devel] [PATCH for-2.7 00/49] NEED_CPU_H / cpu.h / hw/hw.h cleanups Markus Armbruster
2016-04-18 14:07 ` Markus Armbruster
2016-05-16 15:35 [Qemu-devel] [PATCH CFT v3 00/50] " Paolo Bonzini
2016-05-16 15:35 ` [Qemu-devel] [PATCH 06/50] target-arm: make cpu-qom.h not target specific Paolo Bonzini

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1460147350-7601-7-git-send-email-pbonzini@redhat.com \
    --to=pbonzini@redhat.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.