All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH v3 0/7] ARM/ASoC: OMAP3: Fix McBSP2/3 sidetone support
@ 2016-04-29 10:53 ` Peter Ujfalusi
  0 siblings, 0 replies; 41+ messages in thread
From: Peter Ujfalusi @ 2016-04-29 10:53 UTC (permalink / raw)
  To: tony, jarkko.nikula, paul, lgirdwood, broonie
  Cc: t-kristo, linux-omap, linux-arm-kernel, linux-kernel, devicetree,
	alsa-devel

Hi,

Based on the ongoing discussion on v2 (ARM: OMAP3: Fix McBSP2/3 hwmod setup for
sidetone) I have dropped the removal of the sidetone hwmod and only corrected
it. The series now includes all related changes needed to have correct sidetone
support whenever we boot in legacy or in DT mode.

This time the ASoC part have dependency on earlier patches so they can not be
applied separately.

Regards,
Peter
---
Peter Ujfalusi (7):
  ARM: OMAP3: hwmod data: Fix McBSP2/3 sidetone data
  ARM: dts: omap3: Add clocks to McBSP nodes
  ARM: OMAP3: McBSP: New callback for McBSP2/3 ICLK idle configuration
  ARM: OMAP3: pdata-quirks: Add support for McBSP2/3 sidetone handling
  ASoc: omap-mcbsp: Rename omap_mcbsp_sysfs_remove() to
    omap_mcbsp_cleanup()
  ASoC: omap-mcbsp: sidetone: Use the new callback for iclk handling
  ARM: OMAP2+: McBSP: Remove the old iclk allow/deny idle code

 arch/arm/boot/dts/omap3.dtsi                | 10 ++++++++++
 arch/arm/mach-omap2/mcbsp.c                 | 31 ++++++++++++++++-------------
 arch/arm/mach-omap2/omap_hwmod_3xxx_data.c  | 24 ++++------------------
 arch/arm/mach-omap2/pdata-quirks.c          | 18 +++++++++++++++++
 include/linux/platform_data/asoc-ti-mcbsp.h |  4 +++-
 sound/soc/omap/mcbsp.c                      | 21 +++++++++++++------
 sound/soc/omap/mcbsp.h                      |  3 ++-
 sound/soc/omap/omap-mcbsp.c                 |  5 ++++-
 8 files changed, 73 insertions(+), 43 deletions(-)

-- 
2.8.1

^ permalink raw reply	[flat|nested] 41+ messages in thread

* [PATCH v3 0/7] ARM/ASoC: OMAP3: Fix McBSP2/3 sidetone support
@ 2016-04-29 10:53 ` Peter Ujfalusi
  0 siblings, 0 replies; 41+ messages in thread
From: Peter Ujfalusi @ 2016-04-29 10:53 UTC (permalink / raw)
  To: tony-4v6yS6AI5VpBDgjK7y7TUQ,
	jarkko.nikula-FVTvWyuFUl3QT0dZR+AlfA,
	paul-DWxLp4Yu+b8AvxtiuMwx3w, lgirdwood-Re5JQEeQqe8AvxtiuMwx3w,
	broonie-DgEjT+Ai2ygdnm+yROfE0A
  Cc: t-kristo-l0cyMroinI0, linux-omap-u79uwXL29TY76Z2rM5mHXA,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA,
	devicetree-u79uwXL29TY76Z2rM5mHXA,
	alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw

Hi,

Based on the ongoing discussion on v2 (ARM: OMAP3: Fix McBSP2/3 hwmod setup for
sidetone) I have dropped the removal of the sidetone hwmod and only corrected
it. The series now includes all related changes needed to have correct sidetone
support whenever we boot in legacy or in DT mode.

This time the ASoC part have dependency on earlier patches so they can not be
applied separately.

Regards,
Peter
---
Peter Ujfalusi (7):
  ARM: OMAP3: hwmod data: Fix McBSP2/3 sidetone data
  ARM: dts: omap3: Add clocks to McBSP nodes
  ARM: OMAP3: McBSP: New callback for McBSP2/3 ICLK idle configuration
  ARM: OMAP3: pdata-quirks: Add support for McBSP2/3 sidetone handling
  ASoc: omap-mcbsp: Rename omap_mcbsp_sysfs_remove() to
    omap_mcbsp_cleanup()
  ASoC: omap-mcbsp: sidetone: Use the new callback for iclk handling
  ARM: OMAP2+: McBSP: Remove the old iclk allow/deny idle code

 arch/arm/boot/dts/omap3.dtsi                | 10 ++++++++++
 arch/arm/mach-omap2/mcbsp.c                 | 31 ++++++++++++++++-------------
 arch/arm/mach-omap2/omap_hwmod_3xxx_data.c  | 24 ++++------------------
 arch/arm/mach-omap2/pdata-quirks.c          | 18 +++++++++++++++++
 include/linux/platform_data/asoc-ti-mcbsp.h |  4 +++-
 sound/soc/omap/mcbsp.c                      | 21 +++++++++++++------
 sound/soc/omap/mcbsp.h                      |  3 ++-
 sound/soc/omap/omap-mcbsp.c                 |  5 ++++-
 8 files changed, 73 insertions(+), 43 deletions(-)

-- 
2.8.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 41+ messages in thread

* [PATCH v3 0/7] ARM/ASoC: OMAP3: Fix McBSP2/3 sidetone support
@ 2016-04-29 10:53 ` Peter Ujfalusi
  0 siblings, 0 replies; 41+ messages in thread
From: Peter Ujfalusi @ 2016-04-29 10:53 UTC (permalink / raw)
  To: linux-arm-kernel

Hi,

Based on the ongoing discussion on v2 (ARM: OMAP3: Fix McBSP2/3 hwmod setup for
sidetone) I have dropped the removal of the sidetone hwmod and only corrected
it. The series now includes all related changes needed to have correct sidetone
support whenever we boot in legacy or in DT mode.

This time the ASoC part have dependency on earlier patches so they can not be
applied separately.

Regards,
Peter
---
Peter Ujfalusi (7):
  ARM: OMAP3: hwmod data: Fix McBSP2/3 sidetone data
  ARM: dts: omap3: Add clocks to McBSP nodes
  ARM: OMAP3: McBSP: New callback for McBSP2/3 ICLK idle configuration
  ARM: OMAP3: pdata-quirks: Add support for McBSP2/3 sidetone handling
  ASoc: omap-mcbsp: Rename omap_mcbsp_sysfs_remove() to
    omap_mcbsp_cleanup()
  ASoC: omap-mcbsp: sidetone: Use the new callback for iclk handling
  ARM: OMAP2+: McBSP: Remove the old iclk allow/deny idle code

 arch/arm/boot/dts/omap3.dtsi                | 10 ++++++++++
 arch/arm/mach-omap2/mcbsp.c                 | 31 ++++++++++++++++-------------
 arch/arm/mach-omap2/omap_hwmod_3xxx_data.c  | 24 ++++------------------
 arch/arm/mach-omap2/pdata-quirks.c          | 18 +++++++++++++++++
 include/linux/platform_data/asoc-ti-mcbsp.h |  4 +++-
 sound/soc/omap/mcbsp.c                      | 21 +++++++++++++------
 sound/soc/omap/mcbsp.h                      |  3 ++-
 sound/soc/omap/omap-mcbsp.c                 |  5 ++++-
 8 files changed, 73 insertions(+), 43 deletions(-)

-- 
2.8.1

^ permalink raw reply	[flat|nested] 41+ messages in thread

* [PATCH v3 1/7] ARM: OMAP3: hwmod data: Fix McBSP2/3 sidetone data
  2016-04-29 10:53 ` Peter Ujfalusi
  (?)
@ 2016-04-29 10:53   ` Peter Ujfalusi
  -1 siblings, 0 replies; 41+ messages in thread
From: Peter Ujfalusi @ 2016-04-29 10:53 UTC (permalink / raw)
  To: tony, jarkko.nikula, paul, lgirdwood, broonie
  Cc: t-kristo, linux-omap, linux-arm-kernel, linux-kernel, devicetree,
	alsa-devel

The McBSPLP's sidetone main clock is the McBSPLP's ICLK, not FCLK as the
sidetone only receives the ICLK from the main McBSP module.
Since the McBSP and sidetone is using the very same clock from PRCM level
the sidetone must not have the prcm section to check the clock status since
the sidetone is only used when McBSP is already configured.
If two separate hwmods looking at the same bit and they would use
pm_runtime in nested way (as it must happen with McBSP and it's ST module)
the hwmod would warn, because the idlest will not match what it is expected
after enable/disable of the clocks.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 24 ++++--------------------
 1 file changed, 4 insertions(+), 20 deletions(-)

diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index 9869a75c5d96..d72ee6185d5e 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -1322,16 +1322,8 @@ static struct omap_hwmod omap3xxx_mcbsp2_sidetone_hwmod = {
 	.name		= "mcbsp2_sidetone",
 	.class		= &omap3xxx_mcbsp_sidetone_hwmod_class,
 	.mpu_irqs	= omap3xxx_mcbsp2_sidetone_irqs,
-	.main_clk	= "mcbsp2_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			 .module_bit = OMAP3430_EN_MCBSP2_SHIFT,
-			.module_offs = OMAP3430_PER_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP3430_ST_MCBSP2_SHIFT,
-		},
-	},
+	.main_clk	= "mcbsp2_ick",
+	.flags		= HWMOD_NO_IDLEST,
 };
 
 /* mcbsp3_sidetone */
@@ -1344,16 +1336,8 @@ static struct omap_hwmod omap3xxx_mcbsp3_sidetone_hwmod = {
 	.name		= "mcbsp3_sidetone",
 	.class		= &omap3xxx_mcbsp_sidetone_hwmod_class,
 	.mpu_irqs	= omap3xxx_mcbsp3_sidetone_irqs,
-	.main_clk	= "mcbsp3_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP3430_EN_MCBSP3_SHIFT,
-			.module_offs = OMAP3430_PER_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP3430_ST_MCBSP3_SHIFT,
-		},
-	},
+	.main_clk	= "mcbsp3_ick",
+	.flags		= HWMOD_NO_IDLEST,
 };
 
 /* SR common */
-- 
2.8.1

^ permalink raw reply related	[flat|nested] 41+ messages in thread

* [PATCH v3 1/7] ARM: OMAP3: hwmod data: Fix McBSP2/3 sidetone data
@ 2016-04-29 10:53   ` Peter Ujfalusi
  0 siblings, 0 replies; 41+ messages in thread
From: Peter Ujfalusi @ 2016-04-29 10:53 UTC (permalink / raw)
  To: tony, jarkko.nikula, paul, lgirdwood, broonie
  Cc: devicetree, alsa-devel, linux-kernel, t-kristo, linux-omap,
	linux-arm-kernel

The McBSPLP's sidetone main clock is the McBSPLP's ICLK, not FCLK as the
sidetone only receives the ICLK from the main McBSP module.
Since the McBSP and sidetone is using the very same clock from PRCM level
the sidetone must not have the prcm section to check the clock status since
the sidetone is only used when McBSP is already configured.
If two separate hwmods looking at the same bit and they would use
pm_runtime in nested way (as it must happen with McBSP and it's ST module)
the hwmod would warn, because the idlest will not match what it is expected
after enable/disable of the clocks.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 24 ++++--------------------
 1 file changed, 4 insertions(+), 20 deletions(-)

diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index 9869a75c5d96..d72ee6185d5e 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -1322,16 +1322,8 @@ static struct omap_hwmod omap3xxx_mcbsp2_sidetone_hwmod = {
 	.name		= "mcbsp2_sidetone",
 	.class		= &omap3xxx_mcbsp_sidetone_hwmod_class,
 	.mpu_irqs	= omap3xxx_mcbsp2_sidetone_irqs,
-	.main_clk	= "mcbsp2_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			 .module_bit = OMAP3430_EN_MCBSP2_SHIFT,
-			.module_offs = OMAP3430_PER_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP3430_ST_MCBSP2_SHIFT,
-		},
-	},
+	.main_clk	= "mcbsp2_ick",
+	.flags		= HWMOD_NO_IDLEST,
 };
 
 /* mcbsp3_sidetone */
@@ -1344,16 +1336,8 @@ static struct omap_hwmod omap3xxx_mcbsp3_sidetone_hwmod = {
 	.name		= "mcbsp3_sidetone",
 	.class		= &omap3xxx_mcbsp_sidetone_hwmod_class,
 	.mpu_irqs	= omap3xxx_mcbsp3_sidetone_irqs,
-	.main_clk	= "mcbsp3_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP3430_EN_MCBSP3_SHIFT,
-			.module_offs = OMAP3430_PER_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP3430_ST_MCBSP3_SHIFT,
-		},
-	},
+	.main_clk	= "mcbsp3_ick",
+	.flags		= HWMOD_NO_IDLEST,
 };
 
 /* SR common */
-- 
2.8.1

^ permalink raw reply related	[flat|nested] 41+ messages in thread

* [PATCH v3 1/7] ARM: OMAP3: hwmod data: Fix McBSP2/3 sidetone data
@ 2016-04-29 10:53   ` Peter Ujfalusi
  0 siblings, 0 replies; 41+ messages in thread
From: Peter Ujfalusi @ 2016-04-29 10:53 UTC (permalink / raw)
  To: linux-arm-kernel

The McBSPLP's sidetone main clock is the McBSPLP's ICLK, not FCLK as the
sidetone only receives the ICLK from the main McBSP module.
Since the McBSP and sidetone is using the very same clock from PRCM level
the sidetone must not have the prcm section to check the clock status since
the sidetone is only used when McBSP is already configured.
If two separate hwmods looking at the same bit and they would use
pm_runtime in nested way (as it must happen with McBSP and it's ST module)
the hwmod would warn, because the idlest will not match what it is expected
after enable/disable of the clocks.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 24 ++++--------------------
 1 file changed, 4 insertions(+), 20 deletions(-)

diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index 9869a75c5d96..d72ee6185d5e 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -1322,16 +1322,8 @@ static struct omap_hwmod omap3xxx_mcbsp2_sidetone_hwmod = {
 	.name		= "mcbsp2_sidetone",
 	.class		= &omap3xxx_mcbsp_sidetone_hwmod_class,
 	.mpu_irqs	= omap3xxx_mcbsp2_sidetone_irqs,
-	.main_clk	= "mcbsp2_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			 .module_bit = OMAP3430_EN_MCBSP2_SHIFT,
-			.module_offs = OMAP3430_PER_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP3430_ST_MCBSP2_SHIFT,
-		},
-	},
+	.main_clk	= "mcbsp2_ick",
+	.flags		= HWMOD_NO_IDLEST,
 };
 
 /* mcbsp3_sidetone */
@@ -1344,16 +1336,8 @@ static struct omap_hwmod omap3xxx_mcbsp3_sidetone_hwmod = {
 	.name		= "mcbsp3_sidetone",
 	.class		= &omap3xxx_mcbsp_sidetone_hwmod_class,
 	.mpu_irqs	= omap3xxx_mcbsp3_sidetone_irqs,
-	.main_clk	= "mcbsp3_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP3430_EN_MCBSP3_SHIFT,
-			.module_offs = OMAP3430_PER_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP3430_ST_MCBSP3_SHIFT,
-		},
-	},
+	.main_clk	= "mcbsp3_ick",
+	.flags		= HWMOD_NO_IDLEST,
 };
 
 /* SR common */
-- 
2.8.1

^ permalink raw reply related	[flat|nested] 41+ messages in thread

* [PATCH v3 2/7] ARM: dts: omap3: Add clocks to McBSP nodes
  2016-04-29 10:53 ` Peter Ujfalusi
  (?)
@ 2016-04-29 10:53   ` Peter Ujfalusi
  -1 siblings, 0 replies; 41+ messages in thread
From: Peter Ujfalusi @ 2016-04-29 10:53 UTC (permalink / raw)
  To: tony, jarkko.nikula, paul, lgirdwood, broonie
  Cc: t-kristo, linux-omap, linux-arm-kernel, linux-kernel, devicetree,
	alsa-devel

Add clock properties to the McBSP nodes. McBSP2 and 3 need to have ick also
since the Sidetone block of these modules are operating using the McBSP
interface clock.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 arch/arm/boot/dts/omap3.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 9fbda38528dc..4c3c471d2a83 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -493,6 +493,8 @@
 			dmas = <&sdma 31>,
 			       <&sdma 32>;
 			dma-names = "tx", "rx";
+			clocks = <&mcbsp1_fck>;
+			clock-names = "fck";
 			status = "disabled";
 		};
 
@@ -511,6 +513,8 @@
 			dmas = <&sdma 33>,
 			       <&sdma 34>;
 			dma-names = "tx", "rx";
+			clocks = <&mcbsp2_fck>, <&mcbsp2_ick>;
+			clock-names = "fck", "ick";
 			status = "disabled";
 		};
 
@@ -529,6 +533,8 @@
 			dmas = <&sdma 17>,
 			       <&sdma 18>;
 			dma-names = "tx", "rx";
+			clocks = <&mcbsp3_fck>, <&mcbsp3_ick>;
+			clock-names = "fck", "ick";
 			status = "disabled";
 		};
 
@@ -545,6 +551,8 @@
 			dmas = <&sdma 19>,
 			       <&sdma 20>;
 			dma-names = "tx", "rx";
+			clocks = <&mcbsp4_fck>;
+			clock-names = "fck";
 			status = "disabled";
 		};
 
@@ -561,6 +569,8 @@
 			dmas = <&sdma 21>,
 			       <&sdma 22>;
 			dma-names = "tx", "rx";
+			clocks = <&mcbsp5_fck>;
+			clock-names = "fck";
 			status = "disabled";
 		};
 
-- 
2.8.1

^ permalink raw reply related	[flat|nested] 41+ messages in thread

* [PATCH v3 2/7] ARM: dts: omap3: Add clocks to McBSP nodes
@ 2016-04-29 10:53   ` Peter Ujfalusi
  0 siblings, 0 replies; 41+ messages in thread
From: Peter Ujfalusi @ 2016-04-29 10:53 UTC (permalink / raw)
  To: tony, jarkko.nikula, paul, lgirdwood, broonie
  Cc: t-kristo, linux-omap, linux-arm-kernel, linux-kernel, devicetree,
	alsa-devel

Add clock properties to the McBSP nodes. McBSP2 and 3 need to have ick also
since the Sidetone block of these modules are operating using the McBSP
interface clock.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 arch/arm/boot/dts/omap3.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 9fbda38528dc..4c3c471d2a83 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -493,6 +493,8 @@
 			dmas = <&sdma 31>,
 			       <&sdma 32>;
 			dma-names = "tx", "rx";
+			clocks = <&mcbsp1_fck>;
+			clock-names = "fck";
 			status = "disabled";
 		};
 
@@ -511,6 +513,8 @@
 			dmas = <&sdma 33>,
 			       <&sdma 34>;
 			dma-names = "tx", "rx";
+			clocks = <&mcbsp2_fck>, <&mcbsp2_ick>;
+			clock-names = "fck", "ick";
 			status = "disabled";
 		};
 
@@ -529,6 +533,8 @@
 			dmas = <&sdma 17>,
 			       <&sdma 18>;
 			dma-names = "tx", "rx";
+			clocks = <&mcbsp3_fck>, <&mcbsp3_ick>;
+			clock-names = "fck", "ick";
 			status = "disabled";
 		};
 
@@ -545,6 +551,8 @@
 			dmas = <&sdma 19>,
 			       <&sdma 20>;
 			dma-names = "tx", "rx";
+			clocks = <&mcbsp4_fck>;
+			clock-names = "fck";
 			status = "disabled";
 		};
 
@@ -561,6 +569,8 @@
 			dmas = <&sdma 21>,
 			       <&sdma 22>;
 			dma-names = "tx", "rx";
+			clocks = <&mcbsp5_fck>;
+			clock-names = "fck";
 			status = "disabled";
 		};
 
-- 
2.8.1

^ permalink raw reply related	[flat|nested] 41+ messages in thread

* [PATCH v3 2/7] ARM: dts: omap3: Add clocks to McBSP nodes
@ 2016-04-29 10:53   ` Peter Ujfalusi
  0 siblings, 0 replies; 41+ messages in thread
From: Peter Ujfalusi @ 2016-04-29 10:53 UTC (permalink / raw)
  To: linux-arm-kernel

Add clock properties to the McBSP nodes. McBSP2 and 3 need to have ick also
since the Sidetone block of these modules are operating using the McBSP
interface clock.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 arch/arm/boot/dts/omap3.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 9fbda38528dc..4c3c471d2a83 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -493,6 +493,8 @@
 			dmas = <&sdma 31>,
 			       <&sdma 32>;
 			dma-names = "tx", "rx";
+			clocks = <&mcbsp1_fck>;
+			clock-names = "fck";
 			status = "disabled";
 		};
 
@@ -511,6 +513,8 @@
 			dmas = <&sdma 33>,
 			       <&sdma 34>;
 			dma-names = "tx", "rx";
+			clocks = <&mcbsp2_fck>, <&mcbsp2_ick>;
+			clock-names = "fck", "ick";
 			status = "disabled";
 		};
 
@@ -529,6 +533,8 @@
 			dmas = <&sdma 17>,
 			       <&sdma 18>;
 			dma-names = "tx", "rx";
+			clocks = <&mcbsp3_fck>, <&mcbsp3_ick>;
+			clock-names = "fck", "ick";
 			status = "disabled";
 		};
 
@@ -545,6 +551,8 @@
 			dmas = <&sdma 19>,
 			       <&sdma 20>;
 			dma-names = "tx", "rx";
+			clocks = <&mcbsp4_fck>;
+			clock-names = "fck";
 			status = "disabled";
 		};
 
@@ -561,6 +569,8 @@
 			dmas = <&sdma 21>,
 			       <&sdma 22>;
 			dma-names = "tx", "rx";
+			clocks = <&mcbsp5_fck>;
+			clock-names = "fck";
 			status = "disabled";
 		};
 
-- 
2.8.1

^ permalink raw reply related	[flat|nested] 41+ messages in thread

* [PATCH v3 3/7] ARM: OMAP3: McBSP: New callback for McBSP2/3 ICLK idle configuration
  2016-04-29 10:53 ` Peter Ujfalusi
  (?)
@ 2016-04-29 10:53   ` Peter Ujfalusi
  -1 siblings, 0 replies; 41+ messages in thread
From: Peter Ujfalusi @ 2016-04-29 10:53 UTC (permalink / raw)
  To: tony, jarkko.nikula, paul, lgirdwood, broonie
  Cc: t-kristo, linux-omap, linux-arm-kernel, linux-kernel, devicetree,
	alsa-devel

McBSP2/3 module's sidetone module operates using the module's ICLK clock.
When the Sidetone is in use the interface clock of the module must not
idle. The new callback expects to receive the *clk of the module's ick and
not the id number of the McBSP. This will allow us more cleanups and going
to simplify the ICLK handling.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 arch/arm/mach-omap2/mcbsp.c                 | 12 ++++++++++++
 include/linux/platform_data/asoc-ti-mcbsp.h |  1 +
 2 files changed, 13 insertions(+)

diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index b4ac3af1160c..959cb4cb1062 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -48,6 +48,17 @@ static int omap3_enable_st_clock(unsigned int id, bool enable)
 		return omap2_clk_allow_idle(mcbsp_iclks[id]);
 }
 
+static int omap3_mcbsp_force_ick_on(struct clk *clk, bool force_on)
+{
+	if (!clk)
+		return 0;
+
+	if (force_on)
+		return omap2_clk_deny_idle(clk);
+	else
+		return omap2_clk_allow_idle(clk);
+}
+
 static int __init omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
 {
 	int id, count = 1;
@@ -97,6 +108,7 @@ static int __init omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
 		oh_device[1] = omap_hwmod_lookup((
 		(struct omap_mcbsp_dev_attr *)(oh->dev_attr))->sidetone);
 		pdata->enable_st_clock = omap3_enable_st_clock;
+		pdata->force_ick_on = omap3_mcbsp_force_ick_on;
 		sprintf(clk_name, "mcbsp%d_ick", id);
 		mcbsp_iclks[id] = clk_get(NULL, clk_name);
 		count++;
diff --git a/include/linux/platform_data/asoc-ti-mcbsp.h b/include/linux/platform_data/asoc-ti-mcbsp.h
index 3c73c045f8da..73e5e832fa23 100644
--- a/include/linux/platform_data/asoc-ti-mcbsp.h
+++ b/include/linux/platform_data/asoc-ti-mcbsp.h
@@ -45,6 +45,7 @@ struct omap_mcbsp_platform_data {
 	bool has_wakeup; /* Wakeup capability */
 	bool has_ccr; /* Transceiver has configuration control registers */
 	int (*enable_st_clock)(unsigned int, bool);
+	int (*force_ick_on)(struct clk *clk, bool force_on);
 };
 
 /**
-- 
2.8.1

^ permalink raw reply related	[flat|nested] 41+ messages in thread

* [PATCH v3 3/7] ARM: OMAP3: McBSP: New callback for McBSP2/3 ICLK idle configuration
@ 2016-04-29 10:53   ` Peter Ujfalusi
  0 siblings, 0 replies; 41+ messages in thread
From: Peter Ujfalusi @ 2016-04-29 10:53 UTC (permalink / raw)
  To: tony, jarkko.nikula, paul, lgirdwood, broonie
  Cc: t-kristo, linux-omap, linux-arm-kernel, linux-kernel, devicetree,
	alsa-devel

McBSP2/3 module's sidetone module operates using the module's ICLK clock.
When the Sidetone is in use the interface clock of the module must not
idle. The new callback expects to receive the *clk of the module's ick and
not the id number of the McBSP. This will allow us more cleanups and going
to simplify the ICLK handling.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 arch/arm/mach-omap2/mcbsp.c                 | 12 ++++++++++++
 include/linux/platform_data/asoc-ti-mcbsp.h |  1 +
 2 files changed, 13 insertions(+)

diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index b4ac3af1160c..959cb4cb1062 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -48,6 +48,17 @@ static int omap3_enable_st_clock(unsigned int id, bool enable)
 		return omap2_clk_allow_idle(mcbsp_iclks[id]);
 }
 
+static int omap3_mcbsp_force_ick_on(struct clk *clk, bool force_on)
+{
+	if (!clk)
+		return 0;
+
+	if (force_on)
+		return omap2_clk_deny_idle(clk);
+	else
+		return omap2_clk_allow_idle(clk);
+}
+
 static int __init omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
 {
 	int id, count = 1;
@@ -97,6 +108,7 @@ static int __init omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
 		oh_device[1] = omap_hwmod_lookup((
 		(struct omap_mcbsp_dev_attr *)(oh->dev_attr))->sidetone);
 		pdata->enable_st_clock = omap3_enable_st_clock;
+		pdata->force_ick_on = omap3_mcbsp_force_ick_on;
 		sprintf(clk_name, "mcbsp%d_ick", id);
 		mcbsp_iclks[id] = clk_get(NULL, clk_name);
 		count++;
diff --git a/include/linux/platform_data/asoc-ti-mcbsp.h b/include/linux/platform_data/asoc-ti-mcbsp.h
index 3c73c045f8da..73e5e832fa23 100644
--- a/include/linux/platform_data/asoc-ti-mcbsp.h
+++ b/include/linux/platform_data/asoc-ti-mcbsp.h
@@ -45,6 +45,7 @@ struct omap_mcbsp_platform_data {
 	bool has_wakeup; /* Wakeup capability */
 	bool has_ccr; /* Transceiver has configuration control registers */
 	int (*enable_st_clock)(unsigned int, bool);
+	int (*force_ick_on)(struct clk *clk, bool force_on);
 };
 
 /**
-- 
2.8.1

^ permalink raw reply related	[flat|nested] 41+ messages in thread

* [PATCH v3 3/7] ARM: OMAP3: McBSP: New callback for McBSP2/3 ICLK idle configuration
@ 2016-04-29 10:53   ` Peter Ujfalusi
  0 siblings, 0 replies; 41+ messages in thread
From: Peter Ujfalusi @ 2016-04-29 10:53 UTC (permalink / raw)
  To: linux-arm-kernel

McBSP2/3 module's sidetone module operates using the module's ICLK clock.
When the Sidetone is in use the interface clock of the module must not
idle. The new callback expects to receive the *clk of the module's ick and
not the id number of the McBSP. This will allow us more cleanups and going
to simplify the ICLK handling.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 arch/arm/mach-omap2/mcbsp.c                 | 12 ++++++++++++
 include/linux/platform_data/asoc-ti-mcbsp.h |  1 +
 2 files changed, 13 insertions(+)

diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index b4ac3af1160c..959cb4cb1062 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -48,6 +48,17 @@ static int omap3_enable_st_clock(unsigned int id, bool enable)
 		return omap2_clk_allow_idle(mcbsp_iclks[id]);
 }
 
+static int omap3_mcbsp_force_ick_on(struct clk *clk, bool force_on)
+{
+	if (!clk)
+		return 0;
+
+	if (force_on)
+		return omap2_clk_deny_idle(clk);
+	else
+		return omap2_clk_allow_idle(clk);
+}
+
 static int __init omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
 {
 	int id, count = 1;
@@ -97,6 +108,7 @@ static int __init omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
 		oh_device[1] = omap_hwmod_lookup((
 		(struct omap_mcbsp_dev_attr *)(oh->dev_attr))->sidetone);
 		pdata->enable_st_clock = omap3_enable_st_clock;
+		pdata->force_ick_on = omap3_mcbsp_force_ick_on;
 		sprintf(clk_name, "mcbsp%d_ick", id);
 		mcbsp_iclks[id] = clk_get(NULL, clk_name);
 		count++;
diff --git a/include/linux/platform_data/asoc-ti-mcbsp.h b/include/linux/platform_data/asoc-ti-mcbsp.h
index 3c73c045f8da..73e5e832fa23 100644
--- a/include/linux/platform_data/asoc-ti-mcbsp.h
+++ b/include/linux/platform_data/asoc-ti-mcbsp.h
@@ -45,6 +45,7 @@ struct omap_mcbsp_platform_data {
 	bool has_wakeup; /* Wakeup capability */
 	bool has_ccr; /* Transceiver has configuration control registers */
 	int (*enable_st_clock)(unsigned int, bool);
+	int (*force_ick_on)(struct clk *clk, bool force_on);
 };
 
 /**
-- 
2.8.1

^ permalink raw reply related	[flat|nested] 41+ messages in thread

* [PATCH v3 4/7] ARM: OMAP3: pdata-quirks: Add support for McBSP2/3 sidetone handling
  2016-04-29 10:53 ` Peter Ujfalusi
  (?)
@ 2016-04-29 10:53   ` Peter Ujfalusi
  -1 siblings, 0 replies; 41+ messages in thread
From: Peter Ujfalusi @ 2016-04-29 10:53 UTC (permalink / raw)
  To: tony, jarkko.nikula, paul, lgirdwood, broonie
  Cc: t-kristo, linux-omap, linux-arm-kernel, linux-kernel, devicetree,
	alsa-devel

McBSP2/3 module's sidetone module operates using the module's ICLK clock.
When the Sidetone is in use the interface clock of the module must not
idle. To prevent the iclk idling the driver expects to have pdata callback
to call. With this patch the callback is going to be set up for DT boot
also.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 arch/arm/mach-omap2/mcbsp.c                 |  9 +++++++++
 arch/arm/mach-omap2/pdata-quirks.c          | 18 ++++++++++++++++++
 include/linux/platform_data/asoc-ti-mcbsp.h |  2 ++
 3 files changed, 29 insertions(+)

diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index 959cb4cb1062..edf4f41c0135 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -59,6 +59,15 @@ static int omap3_mcbsp_force_ick_on(struct clk *clk, bool force_on)
 		return omap2_clk_allow_idle(clk);
 }
 
+void __init omap3_mcbsp_init_pdata_callback(
+					struct omap_mcbsp_platform_data *pdata)
+{
+	if (!pdata)
+		return;
+
+	pdata->force_ick_on = omap3_mcbsp_force_ick_on;
+}
+
 static int __init omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
 {
 	int id, count = 1;
diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c
index a935d28443da..21bae2ee4d60 100644
--- a/arch/arm/mach-omap2/pdata-quirks.c
+++ b/arch/arm/mach-omap2/pdata-quirks.c
@@ -24,6 +24,7 @@
 #include <linux/platform_data/iommu-omap.h>
 #include <linux/platform_data/wkup_m3.h>
 #include <linux/platform_data/pwm_omap_dmtimer.h>
+#include <linux/platform_data/asoc-ti-mcbsp.h>
 #include <plat/dmtimer.h>
 
 #include "common.h"
@@ -469,6 +470,16 @@ struct pwm_omap_dmtimer_pdata pwm_dmtimer_pdata = {
 };
 #endif
 
+#if IS_ENABLED(CONFIG_SND_OMAP_SOC_MCBSP)
+static struct omap_mcbsp_platform_data mcbsp_pdata;
+static void __init omap3_mcbsp_init(void)
+{
+	omap3_mcbsp_init_pdata_callback(&mcbsp_pdata);
+}
+#else
+static void __init omap3_mcbsp_init(void) {}
+#endif
+
 /*
  * Few boards still need auxdata populated before we populate
  * the dev entries in of_platform_populate().
@@ -501,6 +512,11 @@ static struct of_dev_auxdata omap_auxdata_lookup[] __initdata = {
 	OF_DEV_AUXDATA("ti,davinci_mdio", 0x5c030000, "davinci_mdio.0", NULL),
 	OF_DEV_AUXDATA("ti,am3517-emac", 0x5c000000, "davinci_emac.0",
 		       &am35xx_emac_pdata),
+	/* McBSP modules with sidetone core */
+#if IS_ENABLED(CONFIG_SND_OMAP_SOC_MCBSP)
+	OF_DEV_AUXDATA("ti,omap3-mcbsp", 0x49022000, "49022000.mcbsp", &mcbsp_pdata),
+	OF_DEV_AUXDATA("ti,omap3-mcbsp", 0x49024000, "49024000.mcbsp", &mcbsp_pdata),
+#endif
 #endif
 #ifdef CONFIG_SOC_AM33XX
 	OF_DEV_AUXDATA("ti,am3352-wkup-m3", 0x44d00000, "44d00000.wkup_m3",
@@ -583,6 +599,8 @@ void __init pdata_quirks_init(const struct of_device_id *omap_dt_match_table)
 	    of_machine_is_compatible("ti,omap3"))
 		omap_sdrc_init(NULL, NULL);
 
+	if (of_machine_is_compatible("ti,omap3"))
+		omap3_mcbsp_init();
 	pdata_quirks_check(auxdata_quirks);
 	of_platform_populate(NULL, omap_dt_match_table,
 			     omap_auxdata_lookup, NULL);
diff --git a/include/linux/platform_data/asoc-ti-mcbsp.h b/include/linux/platform_data/asoc-ti-mcbsp.h
index 73e5e832fa23..5530971abf4d 100644
--- a/include/linux/platform_data/asoc-ti-mcbsp.h
+++ b/include/linux/platform_data/asoc-ti-mcbsp.h
@@ -56,4 +56,6 @@ struct omap_mcbsp_dev_attr {
 	const char *sidetone;
 };
 
+void omap3_mcbsp_init_pdata_callback(struct omap_mcbsp_platform_data *pdata);
+
 #endif
-- 
2.8.1

^ permalink raw reply related	[flat|nested] 41+ messages in thread

* [PATCH v3 4/7] ARM: OMAP3: pdata-quirks: Add support for McBSP2/3 sidetone handling
@ 2016-04-29 10:53   ` Peter Ujfalusi
  0 siblings, 0 replies; 41+ messages in thread
From: Peter Ujfalusi @ 2016-04-29 10:53 UTC (permalink / raw)
  To: tony, jarkko.nikula, paul, lgirdwood, broonie
  Cc: t-kristo, linux-omap, linux-arm-kernel, linux-kernel, devicetree,
	alsa-devel

McBSP2/3 module's sidetone module operates using the module's ICLK clock.
When the Sidetone is in use the interface clock of the module must not
idle. To prevent the iclk idling the driver expects to have pdata callback
to call. With this patch the callback is going to be set up for DT boot
also.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 arch/arm/mach-omap2/mcbsp.c                 |  9 +++++++++
 arch/arm/mach-omap2/pdata-quirks.c          | 18 ++++++++++++++++++
 include/linux/platform_data/asoc-ti-mcbsp.h |  2 ++
 3 files changed, 29 insertions(+)

diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index 959cb4cb1062..edf4f41c0135 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -59,6 +59,15 @@ static int omap3_mcbsp_force_ick_on(struct clk *clk, bool force_on)
 		return omap2_clk_allow_idle(clk);
 }
 
+void __init omap3_mcbsp_init_pdata_callback(
+					struct omap_mcbsp_platform_data *pdata)
+{
+	if (!pdata)
+		return;
+
+	pdata->force_ick_on = omap3_mcbsp_force_ick_on;
+}
+
 static int __init omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
 {
 	int id, count = 1;
diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c
index a935d28443da..21bae2ee4d60 100644
--- a/arch/arm/mach-omap2/pdata-quirks.c
+++ b/arch/arm/mach-omap2/pdata-quirks.c
@@ -24,6 +24,7 @@
 #include <linux/platform_data/iommu-omap.h>
 #include <linux/platform_data/wkup_m3.h>
 #include <linux/platform_data/pwm_omap_dmtimer.h>
+#include <linux/platform_data/asoc-ti-mcbsp.h>
 #include <plat/dmtimer.h>
 
 #include "common.h"
@@ -469,6 +470,16 @@ struct pwm_omap_dmtimer_pdata pwm_dmtimer_pdata = {
 };
 #endif
 
+#if IS_ENABLED(CONFIG_SND_OMAP_SOC_MCBSP)
+static struct omap_mcbsp_platform_data mcbsp_pdata;
+static void __init omap3_mcbsp_init(void)
+{
+	omap3_mcbsp_init_pdata_callback(&mcbsp_pdata);
+}
+#else
+static void __init omap3_mcbsp_init(void) {}
+#endif
+
 /*
  * Few boards still need auxdata populated before we populate
  * the dev entries in of_platform_populate().
@@ -501,6 +512,11 @@ static struct of_dev_auxdata omap_auxdata_lookup[] __initdata = {
 	OF_DEV_AUXDATA("ti,davinci_mdio", 0x5c030000, "davinci_mdio.0", NULL),
 	OF_DEV_AUXDATA("ti,am3517-emac", 0x5c000000, "davinci_emac.0",
 		       &am35xx_emac_pdata),
+	/* McBSP modules with sidetone core */
+#if IS_ENABLED(CONFIG_SND_OMAP_SOC_MCBSP)
+	OF_DEV_AUXDATA("ti,omap3-mcbsp", 0x49022000, "49022000.mcbsp", &mcbsp_pdata),
+	OF_DEV_AUXDATA("ti,omap3-mcbsp", 0x49024000, "49024000.mcbsp", &mcbsp_pdata),
+#endif
 #endif
 #ifdef CONFIG_SOC_AM33XX
 	OF_DEV_AUXDATA("ti,am3352-wkup-m3", 0x44d00000, "44d00000.wkup_m3",
@@ -583,6 +599,8 @@ void __init pdata_quirks_init(const struct of_device_id *omap_dt_match_table)
 	    of_machine_is_compatible("ti,omap3"))
 		omap_sdrc_init(NULL, NULL);
 
+	if (of_machine_is_compatible("ti,omap3"))
+		omap3_mcbsp_init();
 	pdata_quirks_check(auxdata_quirks);
 	of_platform_populate(NULL, omap_dt_match_table,
 			     omap_auxdata_lookup, NULL);
diff --git a/include/linux/platform_data/asoc-ti-mcbsp.h b/include/linux/platform_data/asoc-ti-mcbsp.h
index 73e5e832fa23..5530971abf4d 100644
--- a/include/linux/platform_data/asoc-ti-mcbsp.h
+++ b/include/linux/platform_data/asoc-ti-mcbsp.h
@@ -56,4 +56,6 @@ struct omap_mcbsp_dev_attr {
 	const char *sidetone;
 };
 
+void omap3_mcbsp_init_pdata_callback(struct omap_mcbsp_platform_data *pdata);
+
 #endif
-- 
2.8.1

^ permalink raw reply related	[flat|nested] 41+ messages in thread

* [PATCH v3 4/7] ARM: OMAP3: pdata-quirks: Add support for McBSP2/3 sidetone handling
@ 2016-04-29 10:53   ` Peter Ujfalusi
  0 siblings, 0 replies; 41+ messages in thread
From: Peter Ujfalusi @ 2016-04-29 10:53 UTC (permalink / raw)
  To: linux-arm-kernel

McBSP2/3 module's sidetone module operates using the module's ICLK clock.
When the Sidetone is in use the interface clock of the module must not
idle. To prevent the iclk idling the driver expects to have pdata callback
to call. With this patch the callback is going to be set up for DT boot
also.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 arch/arm/mach-omap2/mcbsp.c                 |  9 +++++++++
 arch/arm/mach-omap2/pdata-quirks.c          | 18 ++++++++++++++++++
 include/linux/platform_data/asoc-ti-mcbsp.h |  2 ++
 3 files changed, 29 insertions(+)

diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index 959cb4cb1062..edf4f41c0135 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -59,6 +59,15 @@ static int omap3_mcbsp_force_ick_on(struct clk *clk, bool force_on)
 		return omap2_clk_allow_idle(clk);
 }
 
+void __init omap3_mcbsp_init_pdata_callback(
+					struct omap_mcbsp_platform_data *pdata)
+{
+	if (!pdata)
+		return;
+
+	pdata->force_ick_on = omap3_mcbsp_force_ick_on;
+}
+
 static int __init omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
 {
 	int id, count = 1;
diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c
index a935d28443da..21bae2ee4d60 100644
--- a/arch/arm/mach-omap2/pdata-quirks.c
+++ b/arch/arm/mach-omap2/pdata-quirks.c
@@ -24,6 +24,7 @@
 #include <linux/platform_data/iommu-omap.h>
 #include <linux/platform_data/wkup_m3.h>
 #include <linux/platform_data/pwm_omap_dmtimer.h>
+#include <linux/platform_data/asoc-ti-mcbsp.h>
 #include <plat/dmtimer.h>
 
 #include "common.h"
@@ -469,6 +470,16 @@ struct pwm_omap_dmtimer_pdata pwm_dmtimer_pdata = {
 };
 #endif
 
+#if IS_ENABLED(CONFIG_SND_OMAP_SOC_MCBSP)
+static struct omap_mcbsp_platform_data mcbsp_pdata;
+static void __init omap3_mcbsp_init(void)
+{
+	omap3_mcbsp_init_pdata_callback(&mcbsp_pdata);
+}
+#else
+static void __init omap3_mcbsp_init(void) {}
+#endif
+
 /*
  * Few boards still need auxdata populated before we populate
  * the dev entries in of_platform_populate().
@@ -501,6 +512,11 @@ static struct of_dev_auxdata omap_auxdata_lookup[] __initdata = {
 	OF_DEV_AUXDATA("ti,davinci_mdio", 0x5c030000, "davinci_mdio.0", NULL),
 	OF_DEV_AUXDATA("ti,am3517-emac", 0x5c000000, "davinci_emac.0",
 		       &am35xx_emac_pdata),
+	/* McBSP modules with sidetone core */
+#if IS_ENABLED(CONFIG_SND_OMAP_SOC_MCBSP)
+	OF_DEV_AUXDATA("ti,omap3-mcbsp", 0x49022000, "49022000.mcbsp", &mcbsp_pdata),
+	OF_DEV_AUXDATA("ti,omap3-mcbsp", 0x49024000, "49024000.mcbsp", &mcbsp_pdata),
+#endif
 #endif
 #ifdef CONFIG_SOC_AM33XX
 	OF_DEV_AUXDATA("ti,am3352-wkup-m3", 0x44d00000, "44d00000.wkup_m3",
@@ -583,6 +599,8 @@ void __init pdata_quirks_init(const struct of_device_id *omap_dt_match_table)
 	    of_machine_is_compatible("ti,omap3"))
 		omap_sdrc_init(NULL, NULL);
 
+	if (of_machine_is_compatible("ti,omap3"))
+		omap3_mcbsp_init();
 	pdata_quirks_check(auxdata_quirks);
 	of_platform_populate(NULL, omap_dt_match_table,
 			     omap_auxdata_lookup, NULL);
diff --git a/include/linux/platform_data/asoc-ti-mcbsp.h b/include/linux/platform_data/asoc-ti-mcbsp.h
index 73e5e832fa23..5530971abf4d 100644
--- a/include/linux/platform_data/asoc-ti-mcbsp.h
+++ b/include/linux/platform_data/asoc-ti-mcbsp.h
@@ -56,4 +56,6 @@ struct omap_mcbsp_dev_attr {
 	const char *sidetone;
 };
 
+void omap3_mcbsp_init_pdata_callback(struct omap_mcbsp_platform_data *pdata);
+
 #endif
-- 
2.8.1

^ permalink raw reply related	[flat|nested] 41+ messages in thread

* [PATCH v3 5/7] ASoc: omap-mcbsp: Rename omap_mcbsp_sysfs_remove() to omap_mcbsp_cleanup()
  2016-04-29 10:53 ` Peter Ujfalusi
  (?)
@ 2016-04-29 10:53   ` Peter Ujfalusi
  -1 siblings, 0 replies; 41+ messages in thread
From: Peter Ujfalusi @ 2016-04-29 10:53 UTC (permalink / raw)
  To: tony, jarkko.nikula, paul, lgirdwood, broonie
  Cc: t-kristo, linux-omap, linux-arm-kernel, linux-kernel, devicetree,
	alsa-devel

The function will do more then removing the sysfs files in the future.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 sound/soc/omap/mcbsp.c      | 2 +-
 sound/soc/omap/mcbsp.h      | 2 +-
 sound/soc/omap/omap-mcbsp.c | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/sound/soc/omap/mcbsp.c b/sound/soc/omap/mcbsp.c
index 4a16e778966b..ace73b97769f 100644
--- a/sound/soc/omap/mcbsp.c
+++ b/sound/soc/omap/mcbsp.c
@@ -1088,7 +1088,7 @@ err_thres:
 	return ret;
 }
 
-void omap_mcbsp_sysfs_remove(struct omap_mcbsp *mcbsp)
+void omap_mcbsp_cleanup(struct omap_mcbsp *mcbsp)
 {
 	if (mcbsp->pdata->buffer_size)
 		sysfs_remove_group(&mcbsp->dev->kobj, &additional_attr_group);
diff --git a/sound/soc/omap/mcbsp.h b/sound/soc/omap/mcbsp.h
index 96d1b086bcf8..ce6cbbf923a4 100644
--- a/sound/soc/omap/mcbsp.h
+++ b/sound/soc/omap/mcbsp.h
@@ -349,6 +349,6 @@ int omap_st_disable(struct omap_mcbsp *mcbsp);
 int omap_st_is_enabled(struct omap_mcbsp *mcbsp);
 
 int omap_mcbsp_init(struct platform_device *pdev);
-void omap_mcbsp_sysfs_remove(struct omap_mcbsp *mcbsp);
+void omap_mcbsp_cleanup(struct omap_mcbsp *mcbsp);
 
 #endif /* __ASOC_MCBSP_H */
diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c
index fd99d89de6a8..db07debb4a9c 100644
--- a/sound/soc/omap/omap-mcbsp.c
+++ b/sound/soc/omap/omap-mcbsp.c
@@ -832,7 +832,7 @@ static int asoc_mcbsp_remove(struct platform_device *pdev)
 	if (mcbsp->pdata->ops && mcbsp->pdata->ops->free)
 		mcbsp->pdata->ops->free(mcbsp->id);
 
-	omap_mcbsp_sysfs_remove(mcbsp);
+	omap_mcbsp_cleanup(mcbsp);
 
 	clk_put(mcbsp->fclk);
 
-- 
2.8.1

^ permalink raw reply related	[flat|nested] 41+ messages in thread

* [PATCH v3 5/7] ASoc: omap-mcbsp: Rename omap_mcbsp_sysfs_remove() to omap_mcbsp_cleanup()
@ 2016-04-29 10:53   ` Peter Ujfalusi
  0 siblings, 0 replies; 41+ messages in thread
From: Peter Ujfalusi @ 2016-04-29 10:53 UTC (permalink / raw)
  To: tony, jarkko.nikula, paul, lgirdwood, broonie
  Cc: devicetree, alsa-devel, linux-kernel, t-kristo, linux-omap,
	linux-arm-kernel

The function will do more then removing the sysfs files in the future.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 sound/soc/omap/mcbsp.c      | 2 +-
 sound/soc/omap/mcbsp.h      | 2 +-
 sound/soc/omap/omap-mcbsp.c | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/sound/soc/omap/mcbsp.c b/sound/soc/omap/mcbsp.c
index 4a16e778966b..ace73b97769f 100644
--- a/sound/soc/omap/mcbsp.c
+++ b/sound/soc/omap/mcbsp.c
@@ -1088,7 +1088,7 @@ err_thres:
 	return ret;
 }
 
-void omap_mcbsp_sysfs_remove(struct omap_mcbsp *mcbsp)
+void omap_mcbsp_cleanup(struct omap_mcbsp *mcbsp)
 {
 	if (mcbsp->pdata->buffer_size)
 		sysfs_remove_group(&mcbsp->dev->kobj, &additional_attr_group);
diff --git a/sound/soc/omap/mcbsp.h b/sound/soc/omap/mcbsp.h
index 96d1b086bcf8..ce6cbbf923a4 100644
--- a/sound/soc/omap/mcbsp.h
+++ b/sound/soc/omap/mcbsp.h
@@ -349,6 +349,6 @@ int omap_st_disable(struct omap_mcbsp *mcbsp);
 int omap_st_is_enabled(struct omap_mcbsp *mcbsp);
 
 int omap_mcbsp_init(struct platform_device *pdev);
-void omap_mcbsp_sysfs_remove(struct omap_mcbsp *mcbsp);
+void omap_mcbsp_cleanup(struct omap_mcbsp *mcbsp);
 
 #endif /* __ASOC_MCBSP_H */
diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c
index fd99d89de6a8..db07debb4a9c 100644
--- a/sound/soc/omap/omap-mcbsp.c
+++ b/sound/soc/omap/omap-mcbsp.c
@@ -832,7 +832,7 @@ static int asoc_mcbsp_remove(struct platform_device *pdev)
 	if (mcbsp->pdata->ops && mcbsp->pdata->ops->free)
 		mcbsp->pdata->ops->free(mcbsp->id);
 
-	omap_mcbsp_sysfs_remove(mcbsp);
+	omap_mcbsp_cleanup(mcbsp);
 
 	clk_put(mcbsp->fclk);
 
-- 
2.8.1

^ permalink raw reply related	[flat|nested] 41+ messages in thread

* [PATCH v3 5/7] ASoc: omap-mcbsp: Rename omap_mcbsp_sysfs_remove() to omap_mcbsp_cleanup()
@ 2016-04-29 10:53   ` Peter Ujfalusi
  0 siblings, 0 replies; 41+ messages in thread
From: Peter Ujfalusi @ 2016-04-29 10:53 UTC (permalink / raw)
  To: linux-arm-kernel

The function will do more then removing the sysfs files in the future.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 sound/soc/omap/mcbsp.c      | 2 +-
 sound/soc/omap/mcbsp.h      | 2 +-
 sound/soc/omap/omap-mcbsp.c | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/sound/soc/omap/mcbsp.c b/sound/soc/omap/mcbsp.c
index 4a16e778966b..ace73b97769f 100644
--- a/sound/soc/omap/mcbsp.c
+++ b/sound/soc/omap/mcbsp.c
@@ -1088,7 +1088,7 @@ err_thres:
 	return ret;
 }
 
-void omap_mcbsp_sysfs_remove(struct omap_mcbsp *mcbsp)
+void omap_mcbsp_cleanup(struct omap_mcbsp *mcbsp)
 {
 	if (mcbsp->pdata->buffer_size)
 		sysfs_remove_group(&mcbsp->dev->kobj, &additional_attr_group);
diff --git a/sound/soc/omap/mcbsp.h b/sound/soc/omap/mcbsp.h
index 96d1b086bcf8..ce6cbbf923a4 100644
--- a/sound/soc/omap/mcbsp.h
+++ b/sound/soc/omap/mcbsp.h
@@ -349,6 +349,6 @@ int omap_st_disable(struct omap_mcbsp *mcbsp);
 int omap_st_is_enabled(struct omap_mcbsp *mcbsp);
 
 int omap_mcbsp_init(struct platform_device *pdev);
-void omap_mcbsp_sysfs_remove(struct omap_mcbsp *mcbsp);
+void omap_mcbsp_cleanup(struct omap_mcbsp *mcbsp);
 
 #endif /* __ASOC_MCBSP_H */
diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c
index fd99d89de6a8..db07debb4a9c 100644
--- a/sound/soc/omap/omap-mcbsp.c
+++ b/sound/soc/omap/omap-mcbsp.c
@@ -832,7 +832,7 @@ static int asoc_mcbsp_remove(struct platform_device *pdev)
 	if (mcbsp->pdata->ops && mcbsp->pdata->ops->free)
 		mcbsp->pdata->ops->free(mcbsp->id);
 
-	omap_mcbsp_sysfs_remove(mcbsp);
+	omap_mcbsp_cleanup(mcbsp);
 
 	clk_put(mcbsp->fclk);
 
-- 
2.8.1

^ permalink raw reply related	[flat|nested] 41+ messages in thread

* [PATCH v3 6/7] ASoC: omap-mcbsp: sidetone: Use the new callback for iclk handling
  2016-04-29 10:53 ` Peter Ujfalusi
  (?)
@ 2016-04-29 10:53   ` Peter Ujfalusi
  -1 siblings, 0 replies; 41+ messages in thread
From: Peter Ujfalusi @ 2016-04-29 10:53 UTC (permalink / raw)
  To: tony, jarkko.nikula, paul, lgirdwood, broonie
  Cc: t-kristo, linux-omap, linux-arm-kernel, linux-kernel, devicetree,
	alsa-devel

The McBSP sidetone (in OMAP3 McBSP2 and 3 module) is working with the
module's interface clock. When the sidetone is enabled the iclk must not
idle because it will result in choppy sidetone.
Switch to use the new callback for handling the iclk allow/deny idle
configuration.
For this the driver needs to get the module's ick clock and pass the clk
pointer to the callback.
In DT boot, the pdata-quirk is going to set up the callback for the driver
so save it if it is set in the pdata of the device.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 sound/soc/omap/mcbsp.c      | 19 ++++++++++++++-----
 sound/soc/omap/mcbsp.h      |  1 +
 sound/soc/omap/omap-mcbsp.c |  3 +++
 3 files changed, 18 insertions(+), 5 deletions(-)

diff --git a/sound/soc/omap/mcbsp.c b/sound/soc/omap/mcbsp.c
index ace73b97769f..76ce33199bf9 100644
--- a/sound/soc/omap/mcbsp.c
+++ b/sound/soc/omap/mcbsp.c
@@ -257,8 +257,8 @@ static void omap_st_on(struct omap_mcbsp *mcbsp)
 {
 	unsigned int w;
 
-	if (mcbsp->pdata->enable_st_clock)
-		mcbsp->pdata->enable_st_clock(mcbsp->id, 1);
+	if (mcbsp->pdata->force_ick_on)
+		mcbsp->pdata->force_ick_on(mcbsp->st_data->mcbsp_iclk, true);
 
 	/* Disable Sidetone clock auto-gating for normal operation */
 	w = MCBSP_ST_READ(mcbsp, SYSCONFIG);
@@ -287,8 +287,8 @@ static void omap_st_off(struct omap_mcbsp *mcbsp)
 	w = MCBSP_ST_READ(mcbsp, SYSCONFIG);
 	MCBSP_ST_WRITE(mcbsp, SYSCONFIG, w | ST_AUTOIDLE);
 
-	if (mcbsp->pdata->enable_st_clock)
-		mcbsp->pdata->enable_st_clock(mcbsp->id, 0);
+	if (mcbsp->pdata->force_ick_on)
+		mcbsp->pdata->force_ick_on(mcbsp->st_data->mcbsp_iclk, false);
 }
 
 static void omap_st_fir_write(struct omap_mcbsp *mcbsp, s16 *fir)
@@ -946,6 +946,13 @@ static int omap_st_add(struct omap_mcbsp *mcbsp, struct resource *res)
 	if (!st_data)
 		return -ENOMEM;
 
+	st_data->mcbsp_iclk = clk_get(mcbsp->dev, "ick");
+	if (IS_ERR(st_data->mcbsp_iclk)) {
+		dev_warn(mcbsp->dev,
+			 "Failed to get ick, sidetone might be broken\n");
+		st_data->mcbsp_iclk = NULL;
+	}
+
 	st_data->io_base_st = devm_ioremap(mcbsp->dev, res->start,
 					   resource_size(res));
 	if (!st_data->io_base_st)
@@ -1093,6 +1100,8 @@ void omap_mcbsp_cleanup(struct omap_mcbsp *mcbsp)
 	if (mcbsp->pdata->buffer_size)
 		sysfs_remove_group(&mcbsp->dev->kobj, &additional_attr_group);
 
-	if (mcbsp->st_data)
+	if (mcbsp->st_data) {
 		sysfs_remove_group(&mcbsp->dev->kobj, &sidetone_attr_group);
+		clk_put(mcbsp->st_data->mcbsp_iclk);
+	}
 }
diff --git a/sound/soc/omap/mcbsp.h b/sound/soc/omap/mcbsp.h
index ce6cbbf923a4..61e93b1c185d 100644
--- a/sound/soc/omap/mcbsp.h
+++ b/sound/soc/omap/mcbsp.h
@@ -280,6 +280,7 @@ struct omap_mcbsp_reg_cfg {
 
 struct omap_mcbsp_st_data {
 	void __iomem *io_base_st;
+	struct clk *mcbsp_iclk;
 	bool running;
 	bool enabled;
 	s16 taps[128];	/* Sidetone filter coefficients */
diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c
index db07debb4a9c..d018e966e533 100644
--- a/sound/soc/omap/omap-mcbsp.c
+++ b/sound/soc/omap/omap-mcbsp.c
@@ -788,6 +788,7 @@ static int asoc_mcbsp_probe(struct platform_device *pdev)
 	match = of_match_device(omap_mcbsp_of_match, &pdev->dev);
 	if (match) {
 		struct device_node *node = pdev->dev.of_node;
+		struct omap_mcbsp_platform_data *pdata_quirk = pdata;
 		int buffer_size;
 
 		pdata = devm_kzalloc(&pdev->dev,
@@ -799,6 +800,8 @@ static int asoc_mcbsp_probe(struct platform_device *pdev)
 		memcpy(pdata, match->data, sizeof(*pdata));
 		if (!of_property_read_u32(node, "ti,buffer-size", &buffer_size))
 			pdata->buffer_size = buffer_size;
+		if (pdata_quirk)
+			pdata->force_ick_on = pdata_quirk->force_ick_on;
 	} else if (!pdata) {
 		dev_err(&pdev->dev, "missing platform data.\n");
 		return -EINVAL;
-- 
2.8.1

^ permalink raw reply related	[flat|nested] 41+ messages in thread

* [PATCH v3 6/7] ASoC: omap-mcbsp: sidetone: Use the new callback for iclk handling
@ 2016-04-29 10:53   ` Peter Ujfalusi
  0 siblings, 0 replies; 41+ messages in thread
From: Peter Ujfalusi @ 2016-04-29 10:53 UTC (permalink / raw)
  To: tony, jarkko.nikula, paul, lgirdwood, broonie
  Cc: t-kristo, linux-omap, linux-arm-kernel, linux-kernel, devicetree,
	alsa-devel

The McBSP sidetone (in OMAP3 McBSP2 and 3 module) is working with the
module's interface clock. When the sidetone is enabled the iclk must not
idle because it will result in choppy sidetone.
Switch to use the new callback for handling the iclk allow/deny idle
configuration.
For this the driver needs to get the module's ick clock and pass the clk
pointer to the callback.
In DT boot, the pdata-quirk is going to set up the callback for the driver
so save it if it is set in the pdata of the device.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 sound/soc/omap/mcbsp.c      | 19 ++++++++++++++-----
 sound/soc/omap/mcbsp.h      |  1 +
 sound/soc/omap/omap-mcbsp.c |  3 +++
 3 files changed, 18 insertions(+), 5 deletions(-)

diff --git a/sound/soc/omap/mcbsp.c b/sound/soc/omap/mcbsp.c
index ace73b97769f..76ce33199bf9 100644
--- a/sound/soc/omap/mcbsp.c
+++ b/sound/soc/omap/mcbsp.c
@@ -257,8 +257,8 @@ static void omap_st_on(struct omap_mcbsp *mcbsp)
 {
 	unsigned int w;
 
-	if (mcbsp->pdata->enable_st_clock)
-		mcbsp->pdata->enable_st_clock(mcbsp->id, 1);
+	if (mcbsp->pdata->force_ick_on)
+		mcbsp->pdata->force_ick_on(mcbsp->st_data->mcbsp_iclk, true);
 
 	/* Disable Sidetone clock auto-gating for normal operation */
 	w = MCBSP_ST_READ(mcbsp, SYSCONFIG);
@@ -287,8 +287,8 @@ static void omap_st_off(struct omap_mcbsp *mcbsp)
 	w = MCBSP_ST_READ(mcbsp, SYSCONFIG);
 	MCBSP_ST_WRITE(mcbsp, SYSCONFIG, w | ST_AUTOIDLE);
 
-	if (mcbsp->pdata->enable_st_clock)
-		mcbsp->pdata->enable_st_clock(mcbsp->id, 0);
+	if (mcbsp->pdata->force_ick_on)
+		mcbsp->pdata->force_ick_on(mcbsp->st_data->mcbsp_iclk, false);
 }
 
 static void omap_st_fir_write(struct omap_mcbsp *mcbsp, s16 *fir)
@@ -946,6 +946,13 @@ static int omap_st_add(struct omap_mcbsp *mcbsp, struct resource *res)
 	if (!st_data)
 		return -ENOMEM;
 
+	st_data->mcbsp_iclk = clk_get(mcbsp->dev, "ick");
+	if (IS_ERR(st_data->mcbsp_iclk)) {
+		dev_warn(mcbsp->dev,
+			 "Failed to get ick, sidetone might be broken\n");
+		st_data->mcbsp_iclk = NULL;
+	}
+
 	st_data->io_base_st = devm_ioremap(mcbsp->dev, res->start,
 					   resource_size(res));
 	if (!st_data->io_base_st)
@@ -1093,6 +1100,8 @@ void omap_mcbsp_cleanup(struct omap_mcbsp *mcbsp)
 	if (mcbsp->pdata->buffer_size)
 		sysfs_remove_group(&mcbsp->dev->kobj, &additional_attr_group);
 
-	if (mcbsp->st_data)
+	if (mcbsp->st_data) {
 		sysfs_remove_group(&mcbsp->dev->kobj, &sidetone_attr_group);
+		clk_put(mcbsp->st_data->mcbsp_iclk);
+	}
 }
diff --git a/sound/soc/omap/mcbsp.h b/sound/soc/omap/mcbsp.h
index ce6cbbf923a4..61e93b1c185d 100644
--- a/sound/soc/omap/mcbsp.h
+++ b/sound/soc/omap/mcbsp.h
@@ -280,6 +280,7 @@ struct omap_mcbsp_reg_cfg {
 
 struct omap_mcbsp_st_data {
 	void __iomem *io_base_st;
+	struct clk *mcbsp_iclk;
 	bool running;
 	bool enabled;
 	s16 taps[128];	/* Sidetone filter coefficients */
diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c
index db07debb4a9c..d018e966e533 100644
--- a/sound/soc/omap/omap-mcbsp.c
+++ b/sound/soc/omap/omap-mcbsp.c
@@ -788,6 +788,7 @@ static int asoc_mcbsp_probe(struct platform_device *pdev)
 	match = of_match_device(omap_mcbsp_of_match, &pdev->dev);
 	if (match) {
 		struct device_node *node = pdev->dev.of_node;
+		struct omap_mcbsp_platform_data *pdata_quirk = pdata;
 		int buffer_size;
 
 		pdata = devm_kzalloc(&pdev->dev,
@@ -799,6 +800,8 @@ static int asoc_mcbsp_probe(struct platform_device *pdev)
 		memcpy(pdata, match->data, sizeof(*pdata));
 		if (!of_property_read_u32(node, "ti,buffer-size", &buffer_size))
 			pdata->buffer_size = buffer_size;
+		if (pdata_quirk)
+			pdata->force_ick_on = pdata_quirk->force_ick_on;
 	} else if (!pdata) {
 		dev_err(&pdev->dev, "missing platform data.\n");
 		return -EINVAL;
-- 
2.8.1

^ permalink raw reply related	[flat|nested] 41+ messages in thread

* [PATCH v3 6/7] ASoC: omap-mcbsp: sidetone: Use the new callback for iclk handling
@ 2016-04-29 10:53   ` Peter Ujfalusi
  0 siblings, 0 replies; 41+ messages in thread
From: Peter Ujfalusi @ 2016-04-29 10:53 UTC (permalink / raw)
  To: linux-arm-kernel

The McBSP sidetone (in OMAP3 McBSP2 and 3 module) is working with the
module's interface clock. When the sidetone is enabled the iclk must not
idle because it will result in choppy sidetone.
Switch to use the new callback for handling the iclk allow/deny idle
configuration.
For this the driver needs to get the module's ick clock and pass the clk
pointer to the callback.
In DT boot, the pdata-quirk is going to set up the callback for the driver
so save it if it is set in the pdata of the device.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 sound/soc/omap/mcbsp.c      | 19 ++++++++++++++-----
 sound/soc/omap/mcbsp.h      |  1 +
 sound/soc/omap/omap-mcbsp.c |  3 +++
 3 files changed, 18 insertions(+), 5 deletions(-)

diff --git a/sound/soc/omap/mcbsp.c b/sound/soc/omap/mcbsp.c
index ace73b97769f..76ce33199bf9 100644
--- a/sound/soc/omap/mcbsp.c
+++ b/sound/soc/omap/mcbsp.c
@@ -257,8 +257,8 @@ static void omap_st_on(struct omap_mcbsp *mcbsp)
 {
 	unsigned int w;
 
-	if (mcbsp->pdata->enable_st_clock)
-		mcbsp->pdata->enable_st_clock(mcbsp->id, 1);
+	if (mcbsp->pdata->force_ick_on)
+		mcbsp->pdata->force_ick_on(mcbsp->st_data->mcbsp_iclk, true);
 
 	/* Disable Sidetone clock auto-gating for normal operation */
 	w = MCBSP_ST_READ(mcbsp, SYSCONFIG);
@@ -287,8 +287,8 @@ static void omap_st_off(struct omap_mcbsp *mcbsp)
 	w = MCBSP_ST_READ(mcbsp, SYSCONFIG);
 	MCBSP_ST_WRITE(mcbsp, SYSCONFIG, w | ST_AUTOIDLE);
 
-	if (mcbsp->pdata->enable_st_clock)
-		mcbsp->pdata->enable_st_clock(mcbsp->id, 0);
+	if (mcbsp->pdata->force_ick_on)
+		mcbsp->pdata->force_ick_on(mcbsp->st_data->mcbsp_iclk, false);
 }
 
 static void omap_st_fir_write(struct omap_mcbsp *mcbsp, s16 *fir)
@@ -946,6 +946,13 @@ static int omap_st_add(struct omap_mcbsp *mcbsp, struct resource *res)
 	if (!st_data)
 		return -ENOMEM;
 
+	st_data->mcbsp_iclk = clk_get(mcbsp->dev, "ick");
+	if (IS_ERR(st_data->mcbsp_iclk)) {
+		dev_warn(mcbsp->dev,
+			 "Failed to get ick, sidetone might be broken\n");
+		st_data->mcbsp_iclk = NULL;
+	}
+
 	st_data->io_base_st = devm_ioremap(mcbsp->dev, res->start,
 					   resource_size(res));
 	if (!st_data->io_base_st)
@@ -1093,6 +1100,8 @@ void omap_mcbsp_cleanup(struct omap_mcbsp *mcbsp)
 	if (mcbsp->pdata->buffer_size)
 		sysfs_remove_group(&mcbsp->dev->kobj, &additional_attr_group);
 
-	if (mcbsp->st_data)
+	if (mcbsp->st_data) {
 		sysfs_remove_group(&mcbsp->dev->kobj, &sidetone_attr_group);
+		clk_put(mcbsp->st_data->mcbsp_iclk);
+	}
 }
diff --git a/sound/soc/omap/mcbsp.h b/sound/soc/omap/mcbsp.h
index ce6cbbf923a4..61e93b1c185d 100644
--- a/sound/soc/omap/mcbsp.h
+++ b/sound/soc/omap/mcbsp.h
@@ -280,6 +280,7 @@ struct omap_mcbsp_reg_cfg {
 
 struct omap_mcbsp_st_data {
 	void __iomem *io_base_st;
+	struct clk *mcbsp_iclk;
 	bool running;
 	bool enabled;
 	s16 taps[128];	/* Sidetone filter coefficients */
diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c
index db07debb4a9c..d018e966e533 100644
--- a/sound/soc/omap/omap-mcbsp.c
+++ b/sound/soc/omap/omap-mcbsp.c
@@ -788,6 +788,7 @@ static int asoc_mcbsp_probe(struct platform_device *pdev)
 	match = of_match_device(omap_mcbsp_of_match, &pdev->dev);
 	if (match) {
 		struct device_node *node = pdev->dev.of_node;
+		struct omap_mcbsp_platform_data *pdata_quirk = pdata;
 		int buffer_size;
 
 		pdata = devm_kzalloc(&pdev->dev,
@@ -799,6 +800,8 @@ static int asoc_mcbsp_probe(struct platform_device *pdev)
 		memcpy(pdata, match->data, sizeof(*pdata));
 		if (!of_property_read_u32(node, "ti,buffer-size", &buffer_size))
 			pdata->buffer_size = buffer_size;
+		if (pdata_quirk)
+			pdata->force_ick_on = pdata_quirk->force_ick_on;
 	} else if (!pdata) {
 		dev_err(&pdev->dev, "missing platform data.\n");
 		return -EINVAL;
-- 
2.8.1

^ permalink raw reply related	[flat|nested] 41+ messages in thread

* [PATCH v3 7/7] ARM: OMAP2+: McBSP: Remove the old iclk allow/deny idle code
  2016-04-29 10:53 ` Peter Ujfalusi
  (?)
@ 2016-04-29 10:53   ` Peter Ujfalusi
  -1 siblings, 0 replies; 41+ messages in thread
From: Peter Ujfalusi @ 2016-04-29 10:53 UTC (permalink / raw)
  To: tony, jarkko.nikula, paul, lgirdwood, broonie
  Cc: t-kristo, linux-omap, linux-arm-kernel, linux-kernel, devicetree,
	alsa-devel

The new pdata callback (force_ick_on) is now used by the driver and the old
callback related code can be removed.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 arch/arm/mach-omap2/mcbsp.c                 | 18 ------------------
 include/linux/platform_data/asoc-ti-mcbsp.h |  1 -
 2 files changed, 19 deletions(-)

diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index edf4f41c0135..fc04be74e064 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -34,20 +34,6 @@
 #include "cm3xxx.h"
 #include "cm-regbits-34xx.h"
 
-static struct clk *mcbsp_iclks[5];
-
-static int omap3_enable_st_clock(unsigned int id, bool enable)
-{
-	/*
-	 * Sidetone uses McBSP ICLK - which must not idle when sidetones
-	 * are enabled or sidetones start sounding ugly.
-	 */
-	if (enable)
-		return omap2_clk_deny_idle(mcbsp_iclks[id]);
-	else
-		return omap2_clk_allow_idle(mcbsp_iclks[id]);
-}
-
 static int omap3_mcbsp_force_ick_on(struct clk *clk, bool force_on)
 {
 	if (!clk)
@@ -75,7 +61,6 @@ static int __init omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
 	struct omap_hwmod *oh_device[2];
 	struct omap_mcbsp_platform_data *pdata = NULL;
 	struct platform_device *pdev;
-	char clk_name[11];
 
 	sscanf(oh->name, "mcbsp%d", &id);
 
@@ -116,10 +101,7 @@ static int __init omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
 	if (oh->dev_attr) {
 		oh_device[1] = omap_hwmod_lookup((
 		(struct omap_mcbsp_dev_attr *)(oh->dev_attr))->sidetone);
-		pdata->enable_st_clock = omap3_enable_st_clock;
 		pdata->force_ick_on = omap3_mcbsp_force_ick_on;
-		sprintf(clk_name, "mcbsp%d_ick", id);
-		mcbsp_iclks[id] = clk_get(NULL, clk_name);
 		count++;
 	}
 	pdev = omap_device_build_ss(name, id, oh_device, count, pdata,
diff --git a/include/linux/platform_data/asoc-ti-mcbsp.h b/include/linux/platform_data/asoc-ti-mcbsp.h
index 5530971abf4d..e684543254f3 100644
--- a/include/linux/platform_data/asoc-ti-mcbsp.h
+++ b/include/linux/platform_data/asoc-ti-mcbsp.h
@@ -44,7 +44,6 @@ struct omap_mcbsp_platform_data {
 	/* McBSP platform and instance specific features */
 	bool has_wakeup; /* Wakeup capability */
 	bool has_ccr; /* Transceiver has configuration control registers */
-	int (*enable_st_clock)(unsigned int, bool);
 	int (*force_ick_on)(struct clk *clk, bool force_on);
 };
 
-- 
2.8.1

^ permalink raw reply related	[flat|nested] 41+ messages in thread

* [PATCH v3 7/7] ARM: OMAP2+: McBSP: Remove the old iclk allow/deny idle code
@ 2016-04-29 10:53   ` Peter Ujfalusi
  0 siblings, 0 replies; 41+ messages in thread
From: Peter Ujfalusi @ 2016-04-29 10:53 UTC (permalink / raw)
  To: tony, jarkko.nikula, paul, lgirdwood, broonie
  Cc: t-kristo, linux-omap, linux-arm-kernel, linux-kernel, devicetree,
	alsa-devel

The new pdata callback (force_ick_on) is now used by the driver and the old
callback related code can be removed.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 arch/arm/mach-omap2/mcbsp.c                 | 18 ------------------
 include/linux/platform_data/asoc-ti-mcbsp.h |  1 -
 2 files changed, 19 deletions(-)

diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index edf4f41c0135..fc04be74e064 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -34,20 +34,6 @@
 #include "cm3xxx.h"
 #include "cm-regbits-34xx.h"
 
-static struct clk *mcbsp_iclks[5];
-
-static int omap3_enable_st_clock(unsigned int id, bool enable)
-{
-	/*
-	 * Sidetone uses McBSP ICLK - which must not idle when sidetones
-	 * are enabled or sidetones start sounding ugly.
-	 */
-	if (enable)
-		return omap2_clk_deny_idle(mcbsp_iclks[id]);
-	else
-		return omap2_clk_allow_idle(mcbsp_iclks[id]);
-}
-
 static int omap3_mcbsp_force_ick_on(struct clk *clk, bool force_on)
 {
 	if (!clk)
@@ -75,7 +61,6 @@ static int __init omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
 	struct omap_hwmod *oh_device[2];
 	struct omap_mcbsp_platform_data *pdata = NULL;
 	struct platform_device *pdev;
-	char clk_name[11];
 
 	sscanf(oh->name, "mcbsp%d", &id);
 
@@ -116,10 +101,7 @@ static int __init omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
 	if (oh->dev_attr) {
 		oh_device[1] = omap_hwmod_lookup((
 		(struct omap_mcbsp_dev_attr *)(oh->dev_attr))->sidetone);
-		pdata->enable_st_clock = omap3_enable_st_clock;
 		pdata->force_ick_on = omap3_mcbsp_force_ick_on;
-		sprintf(clk_name, "mcbsp%d_ick", id);
-		mcbsp_iclks[id] = clk_get(NULL, clk_name);
 		count++;
 	}
 	pdev = omap_device_build_ss(name, id, oh_device, count, pdata,
diff --git a/include/linux/platform_data/asoc-ti-mcbsp.h b/include/linux/platform_data/asoc-ti-mcbsp.h
index 5530971abf4d..e684543254f3 100644
--- a/include/linux/platform_data/asoc-ti-mcbsp.h
+++ b/include/linux/platform_data/asoc-ti-mcbsp.h
@@ -44,7 +44,6 @@ struct omap_mcbsp_platform_data {
 	/* McBSP platform and instance specific features */
 	bool has_wakeup; /* Wakeup capability */
 	bool has_ccr; /* Transceiver has configuration control registers */
-	int (*enable_st_clock)(unsigned int, bool);
 	int (*force_ick_on)(struct clk *clk, bool force_on);
 };
 
-- 
2.8.1

^ permalink raw reply related	[flat|nested] 41+ messages in thread

* [PATCH v3 7/7] ARM: OMAP2+: McBSP: Remove the old iclk allow/deny idle code
@ 2016-04-29 10:53   ` Peter Ujfalusi
  0 siblings, 0 replies; 41+ messages in thread
From: Peter Ujfalusi @ 2016-04-29 10:53 UTC (permalink / raw)
  To: linux-arm-kernel

The new pdata callback (force_ick_on) is now used by the driver and the old
callback related code can be removed.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 arch/arm/mach-omap2/mcbsp.c                 | 18 ------------------
 include/linux/platform_data/asoc-ti-mcbsp.h |  1 -
 2 files changed, 19 deletions(-)

diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index edf4f41c0135..fc04be74e064 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -34,20 +34,6 @@
 #include "cm3xxx.h"
 #include "cm-regbits-34xx.h"
 
-static struct clk *mcbsp_iclks[5];
-
-static int omap3_enable_st_clock(unsigned int id, bool enable)
-{
-	/*
-	 * Sidetone uses McBSP ICLK - which must not idle when sidetones
-	 * are enabled or sidetones start sounding ugly.
-	 */
-	if (enable)
-		return omap2_clk_deny_idle(mcbsp_iclks[id]);
-	else
-		return omap2_clk_allow_idle(mcbsp_iclks[id]);
-}
-
 static int omap3_mcbsp_force_ick_on(struct clk *clk, bool force_on)
 {
 	if (!clk)
@@ -75,7 +61,6 @@ static int __init omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
 	struct omap_hwmod *oh_device[2];
 	struct omap_mcbsp_platform_data *pdata = NULL;
 	struct platform_device *pdev;
-	char clk_name[11];
 
 	sscanf(oh->name, "mcbsp%d", &id);
 
@@ -116,10 +101,7 @@ static int __init omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
 	if (oh->dev_attr) {
 		oh_device[1] = omap_hwmod_lookup((
 		(struct omap_mcbsp_dev_attr *)(oh->dev_attr))->sidetone);
-		pdata->enable_st_clock = omap3_enable_st_clock;
 		pdata->force_ick_on = omap3_mcbsp_force_ick_on;
-		sprintf(clk_name, "mcbsp%d_ick", id);
-		mcbsp_iclks[id] = clk_get(NULL, clk_name);
 		count++;
 	}
 	pdev = omap_device_build_ss(name, id, oh_device, count, pdata,
diff --git a/include/linux/platform_data/asoc-ti-mcbsp.h b/include/linux/platform_data/asoc-ti-mcbsp.h
index 5530971abf4d..e684543254f3 100644
--- a/include/linux/platform_data/asoc-ti-mcbsp.h
+++ b/include/linux/platform_data/asoc-ti-mcbsp.h
@@ -44,7 +44,6 @@ struct omap_mcbsp_platform_data {
 	/* McBSP platform and instance specific features */
 	bool has_wakeup; /* Wakeup capability */
 	bool has_ccr; /* Transceiver has configuration control registers */
-	int (*enable_st_clock)(unsigned int, bool);
 	int (*force_ick_on)(struct clk *clk, bool force_on);
 };
 
-- 
2.8.1

^ permalink raw reply related	[flat|nested] 41+ messages in thread

* Re: [PATCH v3 1/7] ARM: OMAP3: hwmod data: Fix McBSP2/3 sidetone data
@ 2016-04-29 15:34     ` Tony Lindgren
  0 siblings, 0 replies; 41+ messages in thread
From: Tony Lindgren @ 2016-04-29 15:34 UTC (permalink / raw)
  To: Peter Ujfalusi
  Cc: jarkko.nikula, paul, lgirdwood, broonie, t-kristo, linux-omap,
	linux-arm-kernel, linux-kernel, devicetree, alsa-devel

* Peter Ujfalusi <peter.ujfalusi@ti.com> [160429 03:55]:
> The McBSPLP's sidetone main clock is the McBSPLP's ICLK, not FCLK as the
> sidetone only receives the ICLK from the main McBSP module.
> Since the McBSP and sidetone is using the very same clock from PRCM level
> the sidetone must not have the prcm section to check the clock status since
> the sidetone is only used when McBSP is already configured.
> If two separate hwmods looking at the same bit and they would use
> pm_runtime in nested way (as it must happen with McBSP and it's ST module)
> the hwmod would warn, because the idlest will not match what it is expected
> after enable/disable of the clocks.

Thanks for looking into it, this looks right to me.

Tony

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: [PATCH v3 1/7] ARM: OMAP3: hwmod data: Fix McBSP2/3 sidetone data
@ 2016-04-29 15:34     ` Tony Lindgren
  0 siblings, 0 replies; 41+ messages in thread
From: Tony Lindgren @ 2016-04-29 15:34 UTC (permalink / raw)
  To: Peter Ujfalusi
  Cc: jarkko.nikula-FVTvWyuFUl3QT0dZR+AlfA,
	paul-DWxLp4Yu+b8AvxtiuMwx3w, lgirdwood-Re5JQEeQqe8AvxtiuMwx3w,
	broonie-DgEjT+Ai2ygdnm+yROfE0A, t-kristo-l0cyMroinI0,
	linux-omap-u79uwXL29TY76Z2rM5mHXA,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA,
	devicetree-u79uwXL29TY76Z2rM5mHXA,
	alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw

* Peter Ujfalusi <peter.ujfalusi-l0cyMroinI0@public.gmane.org> [160429 03:55]:
> The McBSPLP's sidetone main clock is the McBSPLP's ICLK, not FCLK as the
> sidetone only receives the ICLK from the main McBSP module.
> Since the McBSP and sidetone is using the very same clock from PRCM level
> the sidetone must not have the prcm section to check the clock status since
> the sidetone is only used when McBSP is already configured.
> If two separate hwmods looking at the same bit and they would use
> pm_runtime in nested way (as it must happen with McBSP and it's ST module)
> the hwmod would warn, because the idlest will not match what it is expected
> after enable/disable of the clocks.

Thanks for looking into it, this looks right to me.

Tony
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 41+ messages in thread

* [PATCH v3 1/7] ARM: OMAP3: hwmod data: Fix McBSP2/3 sidetone data
@ 2016-04-29 15:34     ` Tony Lindgren
  0 siblings, 0 replies; 41+ messages in thread
From: Tony Lindgren @ 2016-04-29 15:34 UTC (permalink / raw)
  To: linux-arm-kernel

* Peter Ujfalusi <peter.ujfalusi@ti.com> [160429 03:55]:
> The McBSPLP's sidetone main clock is the McBSPLP's ICLK, not FCLK as the
> sidetone only receives the ICLK from the main McBSP module.
> Since the McBSP and sidetone is using the very same clock from PRCM level
> the sidetone must not have the prcm section to check the clock status since
> the sidetone is only used when McBSP is already configured.
> If two separate hwmods looking at the same bit and they would use
> pm_runtime in nested way (as it must happen with McBSP and it's ST module)
> the hwmod would warn, because the idlest will not match what it is expected
> after enable/disable of the clocks.

Thanks for looking into it, this looks right to me.

Tony

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: [PATCH v3 5/7] ASoc: omap-mcbsp: Rename omap_mcbsp_sysfs_remove() to omap_mcbsp_cleanup()
@ 2016-05-02 10:41     ` Mark Brown
  0 siblings, 0 replies; 41+ messages in thread
From: Mark Brown @ 2016-05-02 10:41 UTC (permalink / raw)
  To: Peter Ujfalusi
  Cc: tony, jarkko.nikula, paul, lgirdwood, t-kristo, linux-omap,
	linux-arm-kernel, linux-kernel, devicetree, alsa-devel

[-- Attachment #1: Type: text/plain, Size: 238 bytes --]

On Fri, Apr 29, 2016 at 01:53:20PM +0300, Peter Ujfalusi wrote:
> The function will do more then removing the sysfs files in the future.

Please fix the subject line but otherwise this looks OK.

Acked-by: Mark Brown <broonie@kernel.org>

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 473 bytes --]

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: [PATCH v3 5/7] ASoc: omap-mcbsp: Rename omap_mcbsp_sysfs_remove() to omap_mcbsp_cleanup()
@ 2016-05-02 10:41     ` Mark Brown
  0 siblings, 0 replies; 41+ messages in thread
From: Mark Brown @ 2016-05-02 10:41 UTC (permalink / raw)
  To: Peter Ujfalusi
  Cc: tony-4v6yS6AI5VpBDgjK7y7TUQ,
	jarkko.nikula-FVTvWyuFUl3QT0dZR+AlfA,
	paul-DWxLp4Yu+b8AvxtiuMwx3w, lgirdwood-Re5JQEeQqe8AvxtiuMwx3w,
	t-kristo-l0cyMroinI0, linux-omap-u79uwXL29TY76Z2rM5mHXA,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA,
	devicetree-u79uwXL29TY76Z2rM5mHXA,
	alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw

[-- Attachment #1: Type: text/plain, Size: 267 bytes --]

On Fri, Apr 29, 2016 at 01:53:20PM +0300, Peter Ujfalusi wrote:
> The function will do more then removing the sysfs files in the future.

Please fix the subject line but otherwise this looks OK.

Acked-by: Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 473 bytes --]

^ permalink raw reply	[flat|nested] 41+ messages in thread

* [PATCH v3 5/7] ASoc: omap-mcbsp: Rename omap_mcbsp_sysfs_remove() to omap_mcbsp_cleanup()
@ 2016-05-02 10:41     ` Mark Brown
  0 siblings, 0 replies; 41+ messages in thread
From: Mark Brown @ 2016-05-02 10:41 UTC (permalink / raw)
  To: linux-arm-kernel

On Fri, Apr 29, 2016 at 01:53:20PM +0300, Peter Ujfalusi wrote:
> The function will do more then removing the sysfs files in the future.

Please fix the subject line but otherwise this looks OK.

Acked-by: Mark Brown <broonie@kernel.org>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 473 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20160502/95287bcb/attachment.sig>

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: [PATCH v3 6/7] ASoC: omap-mcbsp: sidetone: Use the new callback for iclk handling
  2016-04-29 10:53   ` Peter Ujfalusi
@ 2016-05-02 10:42     ` Mark Brown
  -1 siblings, 0 replies; 41+ messages in thread
From: Mark Brown @ 2016-05-02 10:42 UTC (permalink / raw)
  To: Peter Ujfalusi
  Cc: tony, jarkko.nikula, paul, lgirdwood, t-kristo, linux-omap,
	linux-arm-kernel, linux-kernel, devicetree, alsa-devel

[-- Attachment #1: Type: text/plain, Size: 304 bytes --]

On Fri, Apr 29, 2016 at 01:53:21PM +0300, Peter Ujfalusi wrote:
> The McBSP sidetone (in OMAP3 McBSP2 and 3 module) is working with the
> module's interface clock. When the sidetone is enabled the iclk must not
> idle because it will result in choppy sidetone.

Acked-by: Mark Brown <broonie@kernel.org>

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 473 bytes --]

^ permalink raw reply	[flat|nested] 41+ messages in thread

* [PATCH v3 6/7] ASoC: omap-mcbsp: sidetone: Use the new callback for iclk handling
@ 2016-05-02 10:42     ` Mark Brown
  0 siblings, 0 replies; 41+ messages in thread
From: Mark Brown @ 2016-05-02 10:42 UTC (permalink / raw)
  To: linux-arm-kernel

On Fri, Apr 29, 2016 at 01:53:21PM +0300, Peter Ujfalusi wrote:
> The McBSP sidetone (in OMAP3 McBSP2 and 3 module) is working with the
> module's interface clock. When the sidetone is enabled the iclk must not
> idle because it will result in choppy sidetone.

Acked-by: Mark Brown <broonie@kernel.org>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 473 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20160502/4fc40c4e/attachment.sig>

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: [PATCH v3 0/7] ARM/ASoC: OMAP3: Fix McBSP2/3 sidetone support
  2016-04-29 10:53 ` Peter Ujfalusi
  (?)
@ 2016-05-11  8:44   ` Peter Ujfalusi
  -1 siblings, 0 replies; 41+ messages in thread
From: Peter Ujfalusi @ 2016-05-11  8:44 UTC (permalink / raw)
  To: tony, jarkko.nikula, paul, lgirdwood, broonie
  Cc: t-kristo, linux-omap, linux-arm-kernel, linux-kernel, devicetree,
	alsa-devel

Tony, Paul,

On 04/29/16 13:53, Peter Ujfalusi wrote:
> Hi,
> 
> Based on the ongoing discussion on v2 (ARM: OMAP3: Fix McBSP2/3 hwmod setup for
> sidetone) I have dropped the removal of the sidetone hwmod and only corrected
> it. The series now includes all related changes needed to have correct sidetone
> support whenever we boot in legacy or in DT mode.
> 
> This time the ASoC part have dependency on earlier patches so they can not be
> applied separately.

How should we proceed from here? I don't want to start designing the ST
separation infrastructure which would be based on this series, but if there
are outstanding issues found on this, I would need to go back to the drawing
board.
The separation will be mostly new code and code shuffle in ASoC, but for
legacy I will need to build up something in arch as well, so I would need at
least one release cycle to start with things.

-- 
Péter

> Regards,
> Peter
> ---
> Peter Ujfalusi (7):
>   ARM: OMAP3: hwmod data: Fix McBSP2/3 sidetone data
>   ARM: dts: omap3: Add clocks to McBSP nodes
>   ARM: OMAP3: McBSP: New callback for McBSP2/3 ICLK idle configuration
>   ARM: OMAP3: pdata-quirks: Add support for McBSP2/3 sidetone handling
>   ASoc: omap-mcbsp: Rename omap_mcbsp_sysfs_remove() to
>     omap_mcbsp_cleanup()
>   ASoC: omap-mcbsp: sidetone: Use the new callback for iclk handling
>   ARM: OMAP2+: McBSP: Remove the old iclk allow/deny idle code
> 
>  arch/arm/boot/dts/omap3.dtsi                | 10 ++++++++++
>  arch/arm/mach-omap2/mcbsp.c                 | 31 ++++++++++++++++-------------
>  arch/arm/mach-omap2/omap_hwmod_3xxx_data.c  | 24 ++++------------------
>  arch/arm/mach-omap2/pdata-quirks.c          | 18 +++++++++++++++++
>  include/linux/platform_data/asoc-ti-mcbsp.h |  4 +++-
>  sound/soc/omap/mcbsp.c                      | 21 +++++++++++++------
>  sound/soc/omap/mcbsp.h                      |  3 ++-
>  sound/soc/omap/omap-mcbsp.c                 |  5 ++++-
>  8 files changed, 73 insertions(+), 43 deletions(-)
> 

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: [PATCH v3 0/7] ARM/ASoC: OMAP3: Fix McBSP2/3 sidetone support
@ 2016-05-11  8:44   ` Peter Ujfalusi
  0 siblings, 0 replies; 41+ messages in thread
From: Peter Ujfalusi @ 2016-05-11  8:44 UTC (permalink / raw)
  To: tony, jarkko.nikula, paul, lgirdwood, broonie
  Cc: devicetree, alsa-devel, linux-kernel, t-kristo, linux-omap,
	linux-arm-kernel

Tony, Paul,

On 04/29/16 13:53, Peter Ujfalusi wrote:
> Hi,
> 
> Based on the ongoing discussion on v2 (ARM: OMAP3: Fix McBSP2/3 hwmod setup for
> sidetone) I have dropped the removal of the sidetone hwmod and only corrected
> it. The series now includes all related changes needed to have correct sidetone
> support whenever we boot in legacy or in DT mode.
> 
> This time the ASoC part have dependency on earlier patches so they can not be
> applied separately.

How should we proceed from here? I don't want to start designing the ST
separation infrastructure which would be based on this series, but if there
are outstanding issues found on this, I would need to go back to the drawing
board.
The separation will be mostly new code and code shuffle in ASoC, but for
legacy I will need to build up something in arch as well, so I would need at
least one release cycle to start with things.

-- 
Péter

> Regards,
> Peter
> ---
> Peter Ujfalusi (7):
>   ARM: OMAP3: hwmod data: Fix McBSP2/3 sidetone data
>   ARM: dts: omap3: Add clocks to McBSP nodes
>   ARM: OMAP3: McBSP: New callback for McBSP2/3 ICLK idle configuration
>   ARM: OMAP3: pdata-quirks: Add support for McBSP2/3 sidetone handling
>   ASoc: omap-mcbsp: Rename omap_mcbsp_sysfs_remove() to
>     omap_mcbsp_cleanup()
>   ASoC: omap-mcbsp: sidetone: Use the new callback for iclk handling
>   ARM: OMAP2+: McBSP: Remove the old iclk allow/deny idle code
> 
>  arch/arm/boot/dts/omap3.dtsi                | 10 ++++++++++
>  arch/arm/mach-omap2/mcbsp.c                 | 31 ++++++++++++++++-------------
>  arch/arm/mach-omap2/omap_hwmod_3xxx_data.c  | 24 ++++------------------
>  arch/arm/mach-omap2/pdata-quirks.c          | 18 +++++++++++++++++
>  include/linux/platform_data/asoc-ti-mcbsp.h |  4 +++-
>  sound/soc/omap/mcbsp.c                      | 21 +++++++++++++------
>  sound/soc/omap/mcbsp.h                      |  3 ++-
>  sound/soc/omap/omap-mcbsp.c                 |  5 ++++-
>  8 files changed, 73 insertions(+), 43 deletions(-)
> 

^ permalink raw reply	[flat|nested] 41+ messages in thread

* [PATCH v3 0/7] ARM/ASoC: OMAP3: Fix McBSP2/3 sidetone support
@ 2016-05-11  8:44   ` Peter Ujfalusi
  0 siblings, 0 replies; 41+ messages in thread
From: Peter Ujfalusi @ 2016-05-11  8:44 UTC (permalink / raw)
  To: linux-arm-kernel

Tony, Paul,

On 04/29/16 13:53, Peter Ujfalusi wrote:
> Hi,
> 
> Based on the ongoing discussion on v2 (ARM: OMAP3: Fix McBSP2/3 hwmod setup for
> sidetone) I have dropped the removal of the sidetone hwmod and only corrected
> it. The series now includes all related changes needed to have correct sidetone
> support whenever we boot in legacy or in DT mode.
> 
> This time the ASoC part have dependency on earlier patches so they can not be
> applied separately.

How should we proceed from here? I don't want to start designing the ST
separation infrastructure which would be based on this series, but if there
are outstanding issues found on this, I would need to go back to the drawing
board.
The separation will be mostly new code and code shuffle in ASoC, but for
legacy I will need to build up something in arch as well, so I would need at
least one release cycle to start with things.

-- 
P?ter

> Regards,
> Peter
> ---
> Peter Ujfalusi (7):
>   ARM: OMAP3: hwmod data: Fix McBSP2/3 sidetone data
>   ARM: dts: omap3: Add clocks to McBSP nodes
>   ARM: OMAP3: McBSP: New callback for McBSP2/3 ICLK idle configuration
>   ARM: OMAP3: pdata-quirks: Add support for McBSP2/3 sidetone handling
>   ASoc: omap-mcbsp: Rename omap_mcbsp_sysfs_remove() to
>     omap_mcbsp_cleanup()
>   ASoC: omap-mcbsp: sidetone: Use the new callback for iclk handling
>   ARM: OMAP2+: McBSP: Remove the old iclk allow/deny idle code
> 
>  arch/arm/boot/dts/omap3.dtsi                | 10 ++++++++++
>  arch/arm/mach-omap2/mcbsp.c                 | 31 ++++++++++++++++-------------
>  arch/arm/mach-omap2/omap_hwmod_3xxx_data.c  | 24 ++++------------------
>  arch/arm/mach-omap2/pdata-quirks.c          | 18 +++++++++++++++++
>  include/linux/platform_data/asoc-ti-mcbsp.h |  4 +++-
>  sound/soc/omap/mcbsp.c                      | 21 +++++++++++++------
>  sound/soc/omap/mcbsp.h                      |  3 ++-
>  sound/soc/omap/omap-mcbsp.c                 |  5 ++++-
>  8 files changed, 73 insertions(+), 43 deletions(-)
> 

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: [PATCH v3 0/7] ARM/ASoC: OMAP3: Fix McBSP2/3 sidetone support
@ 2016-05-12 16:42     ` Tony Lindgren
  0 siblings, 0 replies; 41+ messages in thread
From: Tony Lindgren @ 2016-05-12 16:42 UTC (permalink / raw)
  To: Peter Ujfalusi
  Cc: jarkko.nikula, paul, lgirdwood, broonie, t-kristo, linux-omap,
	linux-arm-kernel, linux-kernel, devicetree, alsa-devel

* Peter Ujfalusi <peter.ujfalusi@ti.com> [160511 01:46]:
> Tony, Paul,
> 
> On 04/29/16 13:53, Peter Ujfalusi wrote:
> > Hi,
> > 
> > Based on the ongoing discussion on v2 (ARM: OMAP3: Fix McBSP2/3 hwmod setup for
> > sidetone) I have dropped the removal of the sidetone hwmod and only corrected
> > it. The series now includes all related changes needed to have correct sidetone
> > support whenever we boot in legacy or in DT mode.
> > 
> > This time the ASoC part have dependency on earlier patches so they can not be
> > applied separately.
> 
> How should we proceed from here? I don't want to start designing the ST
> separation infrastructure which would be based on this series, but if there
> are outstanding issues found on this, I would need to go back to the drawing
> board.
> The separation will be mostly new code and code shuffle in ASoC, but for
> legacy I will need to build up something in arch as well, so I would need at
> least one release cycle to start with things.

Well looks like we have all the acks, so I can apply these. We have
not heard from Paul on this for a while, so let's wait few days for
that.

Meanwhile, Mark wanted to fix the subject for one of the patches, care
to repost that at least? Or the whole series with acks, could be a
pull request too against v4.6-rc1 :)

Regards,

Tony

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: [PATCH v3 0/7] ARM/ASoC: OMAP3: Fix McBSP2/3 sidetone support
@ 2016-05-12 16:42     ` Tony Lindgren
  0 siblings, 0 replies; 41+ messages in thread
From: Tony Lindgren @ 2016-05-12 16:42 UTC (permalink / raw)
  To: Peter Ujfalusi
  Cc: jarkko.nikula-FVTvWyuFUl3QT0dZR+AlfA,
	paul-DWxLp4Yu+b8AvxtiuMwx3w, lgirdwood-Re5JQEeQqe8AvxtiuMwx3w,
	broonie-DgEjT+Ai2ygdnm+yROfE0A, t-kristo-l0cyMroinI0,
	linux-omap-u79uwXL29TY76Z2rM5mHXA,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA,
	devicetree-u79uwXL29TY76Z2rM5mHXA,
	alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw

* Peter Ujfalusi <peter.ujfalusi-l0cyMroinI0@public.gmane.org> [160511 01:46]:
> Tony, Paul,
> 
> On 04/29/16 13:53, Peter Ujfalusi wrote:
> > Hi,
> > 
> > Based on the ongoing discussion on v2 (ARM: OMAP3: Fix McBSP2/3 hwmod setup for
> > sidetone) I have dropped the removal of the sidetone hwmod and only corrected
> > it. The series now includes all related changes needed to have correct sidetone
> > support whenever we boot in legacy or in DT mode.
> > 
> > This time the ASoC part have dependency on earlier patches so they can not be
> > applied separately.
> 
> How should we proceed from here? I don't want to start designing the ST
> separation infrastructure which would be based on this series, but if there
> are outstanding issues found on this, I would need to go back to the drawing
> board.
> The separation will be mostly new code and code shuffle in ASoC, but for
> legacy I will need to build up something in arch as well, so I would need at
> least one release cycle to start with things.

Well looks like we have all the acks, so I can apply these. We have
not heard from Paul on this for a while, so let's wait few days for
that.

Meanwhile, Mark wanted to fix the subject for one of the patches, care
to repost that at least? Or the whole series with acks, could be a
pull request too against v4.6-rc1 :)

Regards,

Tony

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 41+ messages in thread

* [PATCH v3 0/7] ARM/ASoC: OMAP3: Fix McBSP2/3 sidetone support
@ 2016-05-12 16:42     ` Tony Lindgren
  0 siblings, 0 replies; 41+ messages in thread
From: Tony Lindgren @ 2016-05-12 16:42 UTC (permalink / raw)
  To: linux-arm-kernel

* Peter Ujfalusi <peter.ujfalusi@ti.com> [160511 01:46]:
> Tony, Paul,
> 
> On 04/29/16 13:53, Peter Ujfalusi wrote:
> > Hi,
> > 
> > Based on the ongoing discussion on v2 (ARM: OMAP3: Fix McBSP2/3 hwmod setup for
> > sidetone) I have dropped the removal of the sidetone hwmod and only corrected
> > it. The series now includes all related changes needed to have correct sidetone
> > support whenever we boot in legacy or in DT mode.
> > 
> > This time the ASoC part have dependency on earlier patches so they can not be
> > applied separately.
> 
> How should we proceed from here? I don't want to start designing the ST
> separation infrastructure which would be based on this series, but if there
> are outstanding issues found on this, I would need to go back to the drawing
> board.
> The separation will be mostly new code and code shuffle in ASoC, but for
> legacy I will need to build up something in arch as well, so I would need at
> least one release cycle to start with things.

Well looks like we have all the acks, so I can apply these. We have
not heard from Paul on this for a while, so let's wait few days for
that.

Meanwhile, Mark wanted to fix the subject for one of the patches, care
to repost that at least? Or the whole series with acks, could be a
pull request too against v4.6-rc1 :)

Regards,

Tony

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: [PATCH v3 0/7] ARM/ASoC: OMAP3: Fix McBSP2/3 sidetone support
  2016-05-12 16:42     ` Tony Lindgren
  (?)
@ 2016-05-13 11:45       ` Peter Ujfalusi
  -1 siblings, 0 replies; 41+ messages in thread
From: Peter Ujfalusi @ 2016-05-13 11:45 UTC (permalink / raw)
  To: Tony Lindgren
  Cc: jarkko.nikula, paul, lgirdwood, broonie, t-kristo, linux-omap,
	linux-arm-kernel, linux-kernel, devicetree, alsa-devel

On 05/12/16 19:42, Tony Lindgren wrote:
> * Peter Ujfalusi <peter.ujfalusi@ti.com> [160511 01:46]:
>> Tony, Paul,
>>
>> On 04/29/16 13:53, Peter Ujfalusi wrote:
>>> Hi,
>>>
>>> Based on the ongoing discussion on v2 (ARM: OMAP3: Fix McBSP2/3 hwmod setup for
>>> sidetone) I have dropped the removal of the sidetone hwmod and only corrected
>>> it. The series now includes all related changes needed to have correct sidetone
>>> support whenever we boot in legacy or in DT mode.
>>>
>>> This time the ASoC part have dependency on earlier patches so they can not be
>>> applied separately.
>>
>> How should we proceed from here? I don't want to start designing the ST
>> separation infrastructure which would be based on this series, but if there
>> are outstanding issues found on this, I would need to go back to the drawing
>> board.
>> The separation will be mostly new code and code shuffle in ASoC, but for
>> legacy I will need to build up something in arch as well, so I would need at
>> least one release cycle to start with things.
> 
> Well looks like we have all the acks, so I can apply these. We have
> not heard from Paul on this for a while, so let's wait few days for
> that.
> 
> Meanwhile, Mark wanted to fix the subject for one of the patches, care
> to repost that at least? Or the whole series with acks, could be a
> pull request too against v4.6-rc1 :)

Thanks, I'll wait for couple of days for Paul to review and I will prepare v4
and a pull request.

-- 
Péter

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: [PATCH v3 0/7] ARM/ASoC: OMAP3: Fix McBSP2/3 sidetone support
@ 2016-05-13 11:45       ` Peter Ujfalusi
  0 siblings, 0 replies; 41+ messages in thread
From: Peter Ujfalusi @ 2016-05-13 11:45 UTC (permalink / raw)
  To: Tony Lindgren
  Cc: devicetree, paul, alsa-devel, lgirdwood, linux-kernel, t-kristo,
	broonie, linux-arm-kernel, linux-omap, jarkko.nikula

On 05/12/16 19:42, Tony Lindgren wrote:
> * Peter Ujfalusi <peter.ujfalusi@ti.com> [160511 01:46]:
>> Tony, Paul,
>>
>> On 04/29/16 13:53, Peter Ujfalusi wrote:
>>> Hi,
>>>
>>> Based on the ongoing discussion on v2 (ARM: OMAP3: Fix McBSP2/3 hwmod setup for
>>> sidetone) I have dropped the removal of the sidetone hwmod and only corrected
>>> it. The series now includes all related changes needed to have correct sidetone
>>> support whenever we boot in legacy or in DT mode.
>>>
>>> This time the ASoC part have dependency on earlier patches so they can not be
>>> applied separately.
>>
>> How should we proceed from here? I don't want to start designing the ST
>> separation infrastructure which would be based on this series, but if there
>> are outstanding issues found on this, I would need to go back to the drawing
>> board.
>> The separation will be mostly new code and code shuffle in ASoC, but for
>> legacy I will need to build up something in arch as well, so I would need at
>> least one release cycle to start with things.
> 
> Well looks like we have all the acks, so I can apply these. We have
> not heard from Paul on this for a while, so let's wait few days for
> that.
> 
> Meanwhile, Mark wanted to fix the subject for one of the patches, care
> to repost that at least? Or the whole series with acks, could be a
> pull request too against v4.6-rc1 :)

Thanks, I'll wait for couple of days for Paul to review and I will prepare v4
and a pull request.

-- 
Péter

^ permalink raw reply	[flat|nested] 41+ messages in thread

* [PATCH v3 0/7] ARM/ASoC: OMAP3: Fix McBSP2/3 sidetone support
@ 2016-05-13 11:45       ` Peter Ujfalusi
  0 siblings, 0 replies; 41+ messages in thread
From: Peter Ujfalusi @ 2016-05-13 11:45 UTC (permalink / raw)
  To: linux-arm-kernel

On 05/12/16 19:42, Tony Lindgren wrote:
> * Peter Ujfalusi <peter.ujfalusi@ti.com> [160511 01:46]:
>> Tony, Paul,
>>
>> On 04/29/16 13:53, Peter Ujfalusi wrote:
>>> Hi,
>>>
>>> Based on the ongoing discussion on v2 (ARM: OMAP3: Fix McBSP2/3 hwmod setup for
>>> sidetone) I have dropped the removal of the sidetone hwmod and only corrected
>>> it. The series now includes all related changes needed to have correct sidetone
>>> support whenever we boot in legacy or in DT mode.
>>>
>>> This time the ASoC part have dependency on earlier patches so they can not be
>>> applied separately.
>>
>> How should we proceed from here? I don't want to start designing the ST
>> separation infrastructure which would be based on this series, but if there
>> are outstanding issues found on this, I would need to go back to the drawing
>> board.
>> The separation will be mostly new code and code shuffle in ASoC, but for
>> legacy I will need to build up something in arch as well, so I would need at
>> least one release cycle to start with things.
> 
> Well looks like we have all the acks, so I can apply these. We have
> not heard from Paul on this for a while, so let's wait few days for
> that.
> 
> Meanwhile, Mark wanted to fix the subject for one of the patches, care
> to repost that at least? Or the whole series with acks, could be a
> pull request too against v4.6-rc1 :)

Thanks, I'll wait for couple of days for Paul to review and I will prepare v4
and a pull request.

-- 
P?ter

^ permalink raw reply	[flat|nested] 41+ messages in thread

end of thread, other threads:[~2016-05-13 11:46 UTC | newest]

Thread overview: 41+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-04-29 10:53 [PATCH v3 0/7] ARM/ASoC: OMAP3: Fix McBSP2/3 sidetone support Peter Ujfalusi
2016-04-29 10:53 ` Peter Ujfalusi
2016-04-29 10:53 ` Peter Ujfalusi
2016-04-29 10:53 ` [PATCH v3 1/7] ARM: OMAP3: hwmod data: Fix McBSP2/3 sidetone data Peter Ujfalusi
2016-04-29 10:53   ` Peter Ujfalusi
2016-04-29 10:53   ` Peter Ujfalusi
2016-04-29 15:34   ` Tony Lindgren
2016-04-29 15:34     ` Tony Lindgren
2016-04-29 15:34     ` Tony Lindgren
2016-04-29 10:53 ` [PATCH v3 2/7] ARM: dts: omap3: Add clocks to McBSP nodes Peter Ujfalusi
2016-04-29 10:53   ` Peter Ujfalusi
2016-04-29 10:53   ` Peter Ujfalusi
2016-04-29 10:53 ` [PATCH v3 3/7] ARM: OMAP3: McBSP: New callback for McBSP2/3 ICLK idle configuration Peter Ujfalusi
2016-04-29 10:53   ` Peter Ujfalusi
2016-04-29 10:53   ` Peter Ujfalusi
2016-04-29 10:53 ` [PATCH v3 4/7] ARM: OMAP3: pdata-quirks: Add support for McBSP2/3 sidetone handling Peter Ujfalusi
2016-04-29 10:53   ` Peter Ujfalusi
2016-04-29 10:53   ` Peter Ujfalusi
2016-04-29 10:53 ` [PATCH v3 5/7] ASoc: omap-mcbsp: Rename omap_mcbsp_sysfs_remove() to omap_mcbsp_cleanup() Peter Ujfalusi
2016-04-29 10:53   ` Peter Ujfalusi
2016-04-29 10:53   ` Peter Ujfalusi
2016-05-02 10:41   ` Mark Brown
2016-05-02 10:41     ` Mark Brown
2016-05-02 10:41     ` Mark Brown
2016-04-29 10:53 ` [PATCH v3 6/7] ASoC: omap-mcbsp: sidetone: Use the new callback for iclk handling Peter Ujfalusi
2016-04-29 10:53   ` Peter Ujfalusi
2016-04-29 10:53   ` Peter Ujfalusi
2016-05-02 10:42   ` Mark Brown
2016-05-02 10:42     ` Mark Brown
2016-04-29 10:53 ` [PATCH v3 7/7] ARM: OMAP2+: McBSP: Remove the old iclk allow/deny idle code Peter Ujfalusi
2016-04-29 10:53   ` Peter Ujfalusi
2016-04-29 10:53   ` Peter Ujfalusi
2016-05-11  8:44 ` [PATCH v3 0/7] ARM/ASoC: OMAP3: Fix McBSP2/3 sidetone support Peter Ujfalusi
2016-05-11  8:44   ` Peter Ujfalusi
2016-05-11  8:44   ` Peter Ujfalusi
2016-05-12 16:42   ` Tony Lindgren
2016-05-12 16:42     ` Tony Lindgren
2016-05-12 16:42     ` Tony Lindgren
2016-05-13 11:45     ` Peter Ujfalusi
2016-05-13 11:45       ` Peter Ujfalusi
2016-05-13 11:45       ` Peter Ujfalusi

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.