From: Denys Dmytriyenko <denis@denix.org>
To: meta-ti@yoctoproject.org
Subject: [PATCH] recipes: replace remaining base_contains with bb.utils.contains
Date: Mon, 02 May 2016 20:09:26 -0400 [thread overview]
Message-ID: <1462234166-16138-1-git-send-email-denis@denix.org> (raw)
From: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
---
recipes-bsp/boot-monitor/boot-monitor_git.bb | 2 +-
recipes-bsp/cm3-pm-firmware/am33x-cm3_git.bb | 2 +-
recipes-bsp/cm3-pm-firmware/amx3-cm3_git.bb | 2 +-
recipes-bsp/vpe-tests/vpe-tests_git.bb | 2 +-
4 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/recipes-bsp/boot-monitor/boot-monitor_git.bb b/recipes-bsp/boot-monitor/boot-monitor_git.bb
index e532f21..baefed4 100644
--- a/recipes-bsp/boot-monitor/boot-monitor_git.bb
+++ b/recipes-bsp/boot-monitor/boot-monitor_git.bb
@@ -18,7 +18,7 @@ SRCREV = "035329caed63abe7193c855ad5d561ae783b19d7"
BOOT_MONITOR_IMAGE ?= "skern-${BOOT_MONITOR_MAKE_TARGET}.bin"
-FLOATABI = "${@base_contains("TUNE_FEATURES", "vfp", base_contains("TUNE_FEATURES", "callconvention-hard", " -mfloat-abi=hard", " -mfloat-abi=softfp", d), "" ,d)}"
+FLOATABI = "${@bb.utils.contains("TUNE_FEATURES", "vfp", bb.utils.contains("TUNE_FEATURES", "callconvention-hard", " -mfloat-abi=hard", " -mfloat-abi=softfp", d), "" ,d)}"
EXTRA_OEMAKE = "CROSS_COMPILE=${TARGET_PREFIX} CC="${TARGET_PREFIX}gcc ${TOOLCHAIN_OPTIONS} ${FLOATABI}" LD="${TARGET_PREFIX}gcc ${TOOLCHAIN_OPTIONS} ${FLOATABI}""
diff --git a/recipes-bsp/cm3-pm-firmware/am33x-cm3_git.bb b/recipes-bsp/cm3-pm-firmware/am33x-cm3_git.bb
index 338028f..2f55421 100644
--- a/recipes-bsp/cm3-pm-firmware/am33x-cm3_git.bb
+++ b/recipes-bsp/cm3-pm-firmware/am33x-cm3_git.bb
@@ -14,7 +14,7 @@ SRC_URI = "git://git.ti.com/processor-firmware/ti-amx3-cm3-pm-firmware.git;proto
S = "${WORKDIR}/git"
-FLOATABI = "${@base_contains("TUNE_FEATURES", "vfp", base_contains("TUNE_FEATURES", "callconvention-hard", " -mfloat-abi=hard", " -mfloat-abi=softfp", d), "" ,d)}"
+FLOATABI = "${@bb.utils.contains("TUNE_FEATURES", "vfp", bb.utils.contains("TUNE_FEATURES", "callconvention-hard", " -mfloat-abi=hard", " -mfloat-abi=softfp", d), "" ,d)}"
do_compile() {
make CROSS_COMPILE="${TARGET_PREFIX}" CC="${TARGET_PREFIX}gcc ${TOOLCHAIN_OPTIONS} ${FLOATABI}"
diff --git a/recipes-bsp/cm3-pm-firmware/amx3-cm3_git.bb b/recipes-bsp/cm3-pm-firmware/amx3-cm3_git.bb
index 9344371..3b64be9 100644
--- a/recipes-bsp/cm3-pm-firmware/amx3-cm3_git.bb
+++ b/recipes-bsp/cm3-pm-firmware/amx3-cm3_git.bb
@@ -13,7 +13,7 @@ SRC_URI = "git://git.ti.com/processor-firmware/ti-amx3-cm3-pm-firmware.git;proto
S = "${WORKDIR}/git"
-FLOATABI = "${@base_contains("TUNE_FEATURES", "vfp", base_contains("TUNE_FEATURES", "callconvention-hard", " -mfloat-abi=hard", " -mfloat-abi=softfp", d), "" ,d)}"
+FLOATABI = "${@bb.utils.contains("TUNE_FEATURES", "vfp", bb.utils.contains("TUNE_FEATURES", "callconvention-hard", " -mfloat-abi=hard", " -mfloat-abi=softfp", d), "" ,d)}"
do_compile() {
make CROSS_COMPILE="${TARGET_PREFIX}" CC="${TARGET_PREFIX}gcc ${TOOLCHAIN_OPTIONS} ${FLOATABI}"
diff --git a/recipes-bsp/vpe-tests/vpe-tests_git.bb b/recipes-bsp/vpe-tests/vpe-tests_git.bb
index 951544b..92c425b 100644
--- a/recipes-bsp/vpe-tests/vpe-tests_git.bb
+++ b/recipes-bsp/vpe-tests/vpe-tests_git.bb
@@ -18,7 +18,7 @@ SRC_URI = "git://git.ti.com/vpe_tests/vpe_tests.git;protocol=git;branch=${BRANCH
S = "${WORKDIR}/git"
-FLOATABI = "${@base_contains("TUNE_FEATURES", "vfp", base_contains("TUNE_FEATURES", "callconvention-hard", " -mfloat-abi=hard", " -mfloat-abi=softfp", d), "" ,d)}"
+FLOATABI = "${@bb.utils.contains("TUNE_FEATURES", "vfp", bb.utils.contains("TUNE_FEATURES", "callconvention-hard", " -mfloat-abi=hard", " -mfloat-abi=softfp", d), "" ,d)}"
# The test application needs additional include headers from the kernel
EXTRA_OEMAKE = 'CROSS_COMPILE="${TARGET_PREFIX}" CC="${TARGET_PREFIX}gcc ${FLOATABI}" KDIR="${STAGING_KERNEL_DIR}/include/uapi -I${STAGING_KERNEL_DIR}/include"'
--
2.2.0
reply other threads:[~2016-05-03 0:09 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1462234166-16138-1-git-send-email-denis@denix.org \
--to=denis@denix.org \
--cc=meta-ti@yoctoproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.