From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S934524AbcECRxR (ORCPT ); Tue, 3 May 2016 13:53:17 -0400 Received: from mail.kernel.org ([198.145.29.136]:48385 "EHLO mail.kernel.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S933771AbcECRxO (ORCPT ); Tue, 3 May 2016 13:53:14 -0400 From: Krzysztof Kozlowski To: Kukjin Kim , Krzysztof Kozlowski , devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org Cc: Marek Szyprowski , Bartlomiej Zolnierkiewicz , Sylwester Nawrocki , Tomasz Figa , Arnd Bergmann , Olof Johansson , Kevin Hilman , Chanwoo Choi , Inki Dae , Javier Martinez Canillas , Krzysztof Kozlowski Subject: [RFC PATCH 05/12] ARM: dts: exynos: Configure Exynos5410 pinctrl for eMMC and SD card Date: Tue, 3 May 2016 19:52:22 +0200 Message-Id: <1462297949-13824-6-git-send-email-krzk@kernel.org> X-Mailer: git-send-email 2.5.0 In-Reply-To: <1462297949-13824-1-git-send-email-krzk@kernel.org> References: <1462297949-13824-1-git-send-email-krzk@kernel.org> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Configure the pinctrl for MMC0 (eMMC) and MMC2 (microSD card). Signed-off-by: Krzysztof Kozlowski --- I am not sure about sd0_rclk. Also I wonder whether this should go to board DTS... --- arch/arm/boot/dts/exynos5410-pinctrl.dtsi | 87 +++++++++++++++++++++++++++++++ 1 file changed, 87 insertions(+) diff --git a/arch/arm/boot/dts/exynos5410-pinctrl.dtsi b/arch/arm/boot/dts/exynos5410-pinctrl.dtsi index f9aa6bb55464..dc12a79b8b32 100644 --- a/arch/arm/boot/dts/exynos5410-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos5410-pinctrl.dtsi @@ -277,6 +277,93 @@ interrupt-controller; #interrupt-cells = <2>; }; + + sd0_clk: sd0-clk { + samsung,pins = "gpc0-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd0_cmd: sd0-cmd { + samsung,pins = "gpc0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd0_cd: sd0-cd { + samsung,pins = "gpc0-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd0_bus1: sd0-bus-width1 { + samsung,pins = "gpc0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd0_bus4: sd0-bus-width4 { + samsung,pins = "gpc0-4", "gpc0-5", "gpc0-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd0_bus8: sd0-bus-width8 { + samsung,pins = "gpc3-0", "gpc3-1", "gpc3-2", "gpc3-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + /* TODO: What's up with with rclk? On Odroid XU this is missing... */ + /* + sd0_rclk: sd0-rclk { + samsung,pins = "gpc0-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <1>; + samsung,pin-drv = <3>; + }; + */ + + sd2_clk: sd2-clk { + samsung,pins = "gpc2-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd2_cmd: sd2-cmd { + samsung,pins = "gpc2-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd2_cd: sd2-cd { + samsung,pins = "gpc2-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd2_bus1: sd2-bus-width1 { + samsung,pins = "gpc2-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd2_bus4: sd2-bus-width4 { + samsung,pins = "gpc2-4", "gpc2-5", "gpc2-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; }; &pinctrl_1 { -- 2.5.0 From mboxrd@z Thu Jan 1 00:00:00 1970 From: krzk@kernel.org (Krzysztof Kozlowski) Date: Tue, 3 May 2016 19:52:22 +0200 Subject: [RFC PATCH 05/12] ARM: dts: exynos: Configure Exynos5410 pinctrl for eMMC and SD card In-Reply-To: <1462297949-13824-1-git-send-email-krzk@kernel.org> References: <1462297949-13824-1-git-send-email-krzk@kernel.org> Message-ID: <1462297949-13824-6-git-send-email-krzk@kernel.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Configure the pinctrl for MMC0 (eMMC) and MMC2 (microSD card). Signed-off-by: Krzysztof Kozlowski --- I am not sure about sd0_rclk. Also I wonder whether this should go to board DTS... --- arch/arm/boot/dts/exynos5410-pinctrl.dtsi | 87 +++++++++++++++++++++++++++++++ 1 file changed, 87 insertions(+) diff --git a/arch/arm/boot/dts/exynos5410-pinctrl.dtsi b/arch/arm/boot/dts/exynos5410-pinctrl.dtsi index f9aa6bb55464..dc12a79b8b32 100644 --- a/arch/arm/boot/dts/exynos5410-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos5410-pinctrl.dtsi @@ -277,6 +277,93 @@ interrupt-controller; #interrupt-cells = <2>; }; + + sd0_clk: sd0-clk { + samsung,pins = "gpc0-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd0_cmd: sd0-cmd { + samsung,pins = "gpc0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd0_cd: sd0-cd { + samsung,pins = "gpc0-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd0_bus1: sd0-bus-width1 { + samsung,pins = "gpc0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd0_bus4: sd0-bus-width4 { + samsung,pins = "gpc0-4", "gpc0-5", "gpc0-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd0_bus8: sd0-bus-width8 { + samsung,pins = "gpc3-0", "gpc3-1", "gpc3-2", "gpc3-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + /* TODO: What's up with with rclk? On Odroid XU this is missing... */ + /* + sd0_rclk: sd0-rclk { + samsung,pins = "gpc0-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <1>; + samsung,pin-drv = <3>; + }; + */ + + sd2_clk: sd2-clk { + samsung,pins = "gpc2-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd2_cmd: sd2-cmd { + samsung,pins = "gpc2-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd2_cd: sd2-cd { + samsung,pins = "gpc2-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd2_bus1: sd2-bus-width1 { + samsung,pins = "gpc2-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd2_bus4: sd2-bus-width4 { + samsung,pins = "gpc2-4", "gpc2-5", "gpc2-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; }; &pinctrl_1 { -- 2.5.0