All of lore.kernel.org
 help / color / mirror / Atom feed
From: Krzysztof Kozlowski <krzk@kernel.org>
To: Kukjin Kim <kgene@kernel.org>,
	Krzysztof Kozlowski <k.kozlowski@samsung.com>,
	Sylwester Nawrocki <s.nawrocki@samsung.com>,
	Tomasz Figa <tomasz.figa@gmail.com>,
	Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@codeaurora.org>,
	linux-arm-kernel@lists.infradead.org,
	linux-samsung-soc@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org
Cc: Javier Martinez Canillas <javier@osg.samsung.com>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzk@kernel.org>
Subject: [PATCH v3 12/27] ARM: dts: exynos: Split Odroid XU3 LEDs to separate DTSI
Date: Tue, 10 May 2016 22:09:15 +0200	[thread overview]
Message-ID: <1462910970-1812-13-git-send-email-krzk@kernel.org> (raw)
In-Reply-To: <1462910970-1812-1-git-send-email-krzk@kernel.org>

The LED nodes can be shared between Odroid XU3, XU3-Lite and XU (not yet
added) thus removing duplication.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
---
 arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts | 35 +----------------
 arch/arm/boot/dts/exynos5422-odroidxu3.dts      | 35 +----------------
 arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi | 50 +++++++++++++++++++++++++
 3 files changed, 52 insertions(+), 68 deletions(-)
 create mode 100644 arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi

diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts
index 2ae1cf41dcb6..03fa88c45426 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts
@@ -14,44 +14,11 @@
 /dts-v1/;
 #include "exynos5422-odroidxu3-common.dtsi"
 #include "exynos5422-odroidxu3-audio.dtsi"
+#include "exynos54xx-odroidxu-leds.dtsi"
 
 / {
 	model = "Hardkernel Odroid XU3 Lite";
 	compatible = "hardkernel,odroid-xu3-lite", "samsung,exynos5800", "samsung,exynos5";
-
-	pwmleds {
-		compatible = "pwm-leds";
-
-		greenled {
-			label = "green:mmc0";
-			pwms = <&pwm 1 2000000 0>;
-			pwm-names = "pwm1";
-			/*
-			 * Green LED is much brighter than the others
-			 * so limit its max brightness
-			 */
-			max_brightness = <127>;
-			linux,default-trigger = "mmc0";
-		};
-
-		blueled {
-			label = "blue:heartbeat";
-			pwms = <&pwm 2 2000000 0>;
-			pwm-names = "pwm2";
-			max_brightness = <255>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	gpioleds {
-		compatible = "gpio-leds";
-		redled {
-			label = "red:microSD";
-			gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-			linux,default-trigger = "mmc1";
-		};
-	};
 };
 
 &pwm {
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3.dts b/arch/arm/boot/dts/exynos5422-odroidxu3.dts
index 432406db85de..9ed6564acfb0 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3.dts
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3.dts
@@ -13,44 +13,11 @@
 /dts-v1/;
 #include "exynos5422-odroidxu3-common.dtsi"
 #include "exynos5422-odroidxu3-audio.dtsi"
+#include "exynos54xx-odroidxu-leds.dtsi"
 
 / {
 	model = "Hardkernel Odroid XU3";
 	compatible = "hardkernel,odroid-xu3", "samsung,exynos5800", "samsung,exynos5";
-
-	pwmleds {
-		compatible = "pwm-leds";
-
-		greenled {
-			label = "green:mmc0";
-			pwms = <&pwm 1 2000000 0>;
-			pwm-names = "pwm1";
-			/*
-			 * Green LED is much brighter than the others
-			 * so limit its max brightness
-			 */
-			max_brightness = <127>;
-			linux,default-trigger = "mmc0";
-		};
-
-		blueled {
-			label = "blue:heartbeat";
-			pwms = <&pwm 2 2000000 0>;
-			pwm-names = "pwm2";
-			max_brightness = <255>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	gpioleds {
-		compatible = "gpio-leds";
-		redled {
-			label = "red:microSD";
-			gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-			linux,default-trigger = "mmc1";
-		};
-	};
 };
 
 &i2c_0 {
diff --git a/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi b/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi
new file mode 100644
index 000000000000..0ed30206625c
--- /dev/null
+++ b/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi
@@ -0,0 +1,50 @@
+/*
+ * Hardkernel Odroid XU/XU3 LED device tree source
+ *
+ * Copyright (c) 2015,2016 Krzysztof Kozlowski
+ * Copyright (c) 2014 Collabora Ltd.
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	pwmleds {
+		compatible = "pwm-leds";
+
+		greenled {
+			label = "green:mmc0";
+			pwms = <&pwm 1 2000000 0>;
+			pwm-names = "pwm1";
+			/*
+			 * Green LED is much brighter than the others
+			 * so limit its max brightness
+			 */
+			max_brightness = <127>;
+			linux,default-trigger = "mmc0";
+		};
+
+		blueled {
+			label = "blue:heartbeat";
+			pwms = <&pwm 2 2000000 0>;
+			pwm-names = "pwm2";
+			max_brightness = <255>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	gpioleds {
+		compatible = "gpio-leds";
+		redled {
+			label = "red:microSD";
+			gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "mmc1";
+		};
+	};
+};
-- 
2.5.0

WARNING: multiple messages have this Message-ID
From: krzk@kernel.org (Krzysztof Kozlowski)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 12/27] ARM: dts: exynos: Split Odroid XU3 LEDs to separate DTSI
Date: Tue, 10 May 2016 22:09:15 +0200	[thread overview]
Message-ID: <1462910970-1812-13-git-send-email-krzk@kernel.org> (raw)
In-Reply-To: <1462910970-1812-1-git-send-email-krzk@kernel.org>

The LED nodes can be shared between Odroid XU3, XU3-Lite and XU (not yet
added) thus removing duplication.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
---
 arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts | 35 +----------------
 arch/arm/boot/dts/exynos5422-odroidxu3.dts      | 35 +----------------
 arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi | 50 +++++++++++++++++++++++++
 3 files changed, 52 insertions(+), 68 deletions(-)
 create mode 100644 arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi

diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts
index 2ae1cf41dcb6..03fa88c45426 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts
@@ -14,44 +14,11 @@
 /dts-v1/;
 #include "exynos5422-odroidxu3-common.dtsi"
 #include "exynos5422-odroidxu3-audio.dtsi"
+#include "exynos54xx-odroidxu-leds.dtsi"
 
 / {
 	model = "Hardkernel Odroid XU3 Lite";
 	compatible = "hardkernel,odroid-xu3-lite", "samsung,exynos5800", "samsung,exynos5";
-
-	pwmleds {
-		compatible = "pwm-leds";
-
-		greenled {
-			label = "green:mmc0";
-			pwms = <&pwm 1 2000000 0>;
-			pwm-names = "pwm1";
-			/*
-			 * Green LED is much brighter than the others
-			 * so limit its max brightness
-			 */
-			max_brightness = <127>;
-			linux,default-trigger = "mmc0";
-		};
-
-		blueled {
-			label = "blue:heartbeat";
-			pwms = <&pwm 2 2000000 0>;
-			pwm-names = "pwm2";
-			max_brightness = <255>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	gpioleds {
-		compatible = "gpio-leds";
-		redled {
-			label = "red:microSD";
-			gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-			linux,default-trigger = "mmc1";
-		};
-	};
 };
 
 &pwm {
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3.dts b/arch/arm/boot/dts/exynos5422-odroidxu3.dts
index 432406db85de..9ed6564acfb0 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3.dts
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3.dts
@@ -13,44 +13,11 @@
 /dts-v1/;
 #include "exynos5422-odroidxu3-common.dtsi"
 #include "exynos5422-odroidxu3-audio.dtsi"
+#include "exynos54xx-odroidxu-leds.dtsi"
 
 / {
 	model = "Hardkernel Odroid XU3";
 	compatible = "hardkernel,odroid-xu3", "samsung,exynos5800", "samsung,exynos5";
-
-	pwmleds {
-		compatible = "pwm-leds";
-
-		greenled {
-			label = "green:mmc0";
-			pwms = <&pwm 1 2000000 0>;
-			pwm-names = "pwm1";
-			/*
-			 * Green LED is much brighter than the others
-			 * so limit its max brightness
-			 */
-			max_brightness = <127>;
-			linux,default-trigger = "mmc0";
-		};
-
-		blueled {
-			label = "blue:heartbeat";
-			pwms = <&pwm 2 2000000 0>;
-			pwm-names = "pwm2";
-			max_brightness = <255>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	gpioleds {
-		compatible = "gpio-leds";
-		redled {
-			label = "red:microSD";
-			gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-			linux,default-trigger = "mmc1";
-		};
-	};
 };
 
 &i2c_0 {
diff --git a/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi b/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi
new file mode 100644
index 000000000000..0ed30206625c
--- /dev/null
+++ b/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi
@@ -0,0 +1,50 @@
+/*
+ * Hardkernel Odroid XU/XU3 LED device tree source
+ *
+ * Copyright (c) 2015,2016 Krzysztof Kozlowski
+ * Copyright (c) 2014 Collabora Ltd.
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	pwmleds {
+		compatible = "pwm-leds";
+
+		greenled {
+			label = "green:mmc0";
+			pwms = <&pwm 1 2000000 0>;
+			pwm-names = "pwm1";
+			/*
+			 * Green LED is much brighter than the others
+			 * so limit its max brightness
+			 */
+			max_brightness = <127>;
+			linux,default-trigger = "mmc0";
+		};
+
+		blueled {
+			label = "blue:heartbeat";
+			pwms = <&pwm 2 2000000 0>;
+			pwm-names = "pwm2";
+			max_brightness = <255>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	gpioleds {
+		compatible = "gpio-leds";
+		redled {
+			label = "red:microSD";
+			gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "mmc1";
+		};
+	};
+};
-- 
2.5.0

  parent reply	other threads:[~2016-05-10 20:10 UTC|newest]

Thread overview: 76+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-05-10 20:09 [PATCH v3 00/27] ARM: dts: exynos: Add initial support for Odroid XU Krzysztof Kozlowski
2016-05-10 20:09 ` Krzysztof Kozlowski
2016-05-10 20:09 ` [PATCH v3 01/27] dt-bindings: clock: Add license and reformat Exynos5410 clock IDs Krzysztof Kozlowski
2016-05-10 20:09   ` Krzysztof Kozlowski
2016-05-10 20:09 ` [PATCH v3 02/27] dt-bindings: clock: Add PWM and USB clock IDs to Exynos5410 Krzysztof Kozlowski
2016-05-10 20:09   ` Krzysztof Kozlowski
2016-05-10 20:09 ` [PATCH v3 03/27] ARM: dts: exynos: Add fin_pll node for clock driver Krzysztof Kozlowski
2016-05-10 20:09   ` Krzysztof Kozlowski
2016-05-10 20:09 ` [PATCH v3 04/27] clk: samsung: exynos5410: Provide fin_pll external fixed clock Krzysztof Kozlowski
2016-05-10 20:09   ` Krzysztof Kozlowski
2016-05-10 20:09 ` [PATCH v3 05/27] ARM: dts: exynos: Switch MCT node to a new fin_pll clock Krzysztof Kozlowski
2016-05-10 20:09   ` Krzysztof Kozlowski
2016-05-10 20:09 ` [PATCH v3 06/27] ARM: dts: exynos: Remove old fixed-clock provider on SMDK5410 Krzysztof Kozlowski
2016-05-10 20:09   ` Krzysztof Kozlowski
2016-05-10 20:09 ` [PATCH v3 07/27] clk: samsung: exynos5410: Rename fin_pll from temporary to regular name Krzysztof Kozlowski
2016-05-10 20:09   ` Krzysztof Kozlowski
2016-05-10 20:09 ` [PATCH v3 08/27] clk: samsung: exynos5410: Add serial3, USB and PWM clocks Krzysztof Kozlowski
2016-05-10 20:09   ` Krzysztof Kozlowski
2016-05-10 20:09 ` [PATCH v3 09/27] ARM: dts: exynos: Re-order alphabetically Exynos5420 SD0/SD1 pinctrl nodes Krzysztof Kozlowski
2016-05-10 20:09   ` Krzysztof Kozlowski
2016-05-10 20:09 ` [PATCH v3 10/27] ARM: dts: exynos: Use lowercase for Exynos5410 CPU node labels Krzysztof Kozlowski
2016-05-10 20:09   ` Krzysztof Kozlowski
2016-05-10 20:09 ` [PATCH v3 11/27] ARM: dts: exynos: Configure Exynos5410 pinctrl for eMMC and SD card Krzysztof Kozlowski
2016-05-10 20:09   ` Krzysztof Kozlowski
2016-05-10 20:09 ` Krzysztof Kozlowski [this message]
2016-05-10 20:09   ` [PATCH v3 12/27] ARM: dts: exynos: Split Odroid XU3 LEDs to separate DTSI Krzysztof Kozlowski
2016-05-10 20:09 ` [PATCH v3 13/27] ARM: dts: exynos: Move common nodes to exynos5.dtsi Krzysztof Kozlowski
2016-05-10 20:09   ` Krzysztof Kozlowski
2016-05-10 20:09 ` [PATCH v3 14/27] ARM: dts: exynos: Prepare for inclusion of exynos5.dtsi in exynos5410.dtsi Krzysztof Kozlowski
2016-05-10 20:09   ` Krzysztof Kozlowski
2016-05-10 20:09 ` [PATCH v3 15/27] ARM: dts: exynos: Use phandle to get parent node in exynos5250-snow Krzysztof Kozlowski
2016-05-10 20:09   ` Krzysztof Kozlowski
2016-05-10 20:09 ` [PATCH v3 16/27] ARM: dts: exynos: Move Exynos5250 and Exynos5420 nodes under soc Krzysztof Kozlowski
2016-05-10 20:09 ` [PATCH v3 17/27] ARM: dts: exynos: Include common exynos5 in exynos5410.dtsi Krzysztof Kozlowski
2016-05-10 20:09   ` Krzysztof Kozlowski
2016-05-10 20:09 ` [PATCH v3 18/27] ARM: dts: exynos: Enable UART3 on Exynos5410 Krzysztof Kozlowski
2016-05-10 20:09   ` Krzysztof Kozlowski
2016-05-10 20:09 ` [PATCH v3 19/27] ARM: dts: exynos: MCT is not an interrupt controller and extend length of iomap Krzysztof Kozlowski
2016-05-10 20:09   ` Krzysztof Kozlowski
2016-05-10 20:09 ` [PATCH v3 20/27] ARM: dts: exynos: Move common Exynos5410/542x/5800 nodes to new DTSI Krzysztof Kozlowski
2016-05-10 20:09   ` Krzysztof Kozlowski
2016-05-10 20:09 ` [PATCH v3 21/27] ARM: dts: exynos: Add USB to Exynos5410 Krzysztof Kozlowski
2016-05-10 20:09   ` Krzysztof Kozlowski
2016-05-10 20:09 ` [PATCH v3 22/27] ARM: dts: exynos: Add initial support for Odroid XU board Krzysztof Kozlowski
2016-05-10 20:09   ` Krzysztof Kozlowski
2016-05-10 20:09 ` [PATCH v3 23/27] dt-bindings: clock: Add I2C, HSI2C and RTC clock IDs to Exynos5410 Krzysztof Kozlowski
2016-05-10 20:09   ` Krzysztof Kozlowski
2016-05-11 12:31   ` Javier Martinez Canillas
2016-05-11 12:31     ` Javier Martinez Canillas
2016-05-10 20:09 ` [PATCH v3 24/27] clk: samsung: exynos5410: Add I2C, HSI2C and RTC clocks Krzysztof Kozlowski
2016-05-10 20:09   ` Krzysztof Kozlowski
2016-05-11 12:32   ` Javier Martinez Canillas
2016-05-11 12:32     ` Javier Martinez Canillas
2016-05-10 20:09 ` [PATCH v3 25/27] ARM: dts: exynos: Move HSI2C nodes to exynos54xx.dtsi Krzysztof Kozlowski
2016-05-10 20:09   ` Krzysztof Kozlowski
2016-05-11 12:33   ` Javier Martinez Canillas
2016-05-11 12:33     ` Javier Martinez Canillas
2016-05-10 20:09 ` [PATCH v3 26/27] ARM: dts: exynos: Add I2C, PWM and UART pinctrl to Exynos5410 Krzysztof Kozlowski
2016-05-10 20:09   ` Krzysztof Kozlowski
2016-05-11 12:36   ` Javier Martinez Canillas
2016-05-11 12:36     ` Javier Martinez Canillas
2016-05-11 12:36     ` Javier Martinez Canillas
2016-05-10 20:09 ` [PATCH v3 27/27] ARM: dts: exynos: Add RTC and I2C " Krzysztof Kozlowski
2016-05-10 20:09   ` Krzysztof Kozlowski
2016-05-11 12:44   ` Javier Martinez Canillas
2016-05-11 12:44     ` Javier Martinez Canillas
2016-05-11 12:54     ` Krzysztof Kozlowski
2016-05-11 12:54       ` Krzysztof Kozlowski
2016-05-11 15:41 ` [PATCH v3 00/27] ARM: dts: exynos: Add initial support for Odroid XU Javier Martinez Canillas
2016-05-11 15:41   ` Javier Martinez Canillas
2016-05-11 18:14   ` Krzysztof Kozlowski
2016-05-11 18:14     ` Krzysztof Kozlowski
2016-05-13 12:03 ` Robin Murphy
2016-05-13 12:03   ` Robin Murphy
2016-05-13 12:11   ` Krzysztof Kozlowski
2016-05-13 12:11     ` Krzysztof Kozlowski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1462910970-1812-13-git-send-email-krzk@kernel.org \
    --to=krzk@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=javier@osg.samsung.com \
    --cc=k.kozlowski@samsung.com \
    --cc=kgene@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=robh+dt@kernel.org \
    --cc=s.nawrocki@samsung.com \
    --cc=sboyd@codeaurora.org \
    --cc=tomasz.figa@gmail.com \
    --subject='Re: [PATCH v3 12/27] ARM: dts: exynos: Split Odroid XU3 LEDs to separate DTSI' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.