All of lore.kernel.org
 help / color / mirror / Atom feed
From: Krzysztof Kozlowski <krzk@kernel.org>
To: Kukjin Kim <kgene@kernel.org>,
	Krzysztof Kozlowski <k.kozlowski@samsung.com>,
	Sylwester Nawrocki <s.nawrocki@samsung.com>,
	Tomasz Figa <tomasz.figa@gmail.com>,
	Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@codeaurora.org>,
	linux-arm-kernel@lists.infradead.org,
	linux-samsung-soc@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org
Cc: Javier Martinez Canillas <javier@osg.samsung.com>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzk@kernel.org>
Subject: [PATCH v3 27/27] ARM: dts: exynos: Add RTC and I2C to Exynos5410
Date: Tue, 10 May 2016 22:09:30 +0200	[thread overview]
Message-ID: <1462910970-1812-28-git-send-email-krzk@kernel.org> (raw)
In-Reply-To: <1462910970-1812-1-git-send-email-krzk@kernel.org>

Configure Exynos5410-specific properties of RTC, I2C and HSI2C nodes.
This still does not enable them on the board level though.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 arch/arm/boot/dts/exynos5410.dtsi | 66 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 66 insertions(+)

diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi
index dd4d6d752865..ae64cb0a8efd 100644
--- a/arch/arm/boot/dts/exynos5410.dtsi
+++ b/arch/arm/boot/dts/exynos5410.dtsi
@@ -114,6 +114,9 @@
 			status = "disabled";
 		};
 
+		/* i2c_0-3 are defined in exynos5.dtsi */
+		/* hsi2c_4-7 are defined in exynos5xx.dtsi */
+
 		pinctrl_0: pinctrl@13400000 {
 			compatible = "samsung,exynos5410-pinctrl";
 			reg = <0x13400000 0x1000>;
@@ -146,6 +149,62 @@
 	};
 };
 
+&i2c_0 {
+	clocks = <&clock CLK_I2C0>;
+	clock-names = "i2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_bus>;
+};
+
+&i2c_1 {
+	clocks = <&clock CLK_I2C1>;
+	clock-names = "i2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_bus>;
+};
+
+&i2c_2 {
+	clocks = <&clock CLK_I2C2>;
+	clock-names = "i2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_bus>;
+};
+
+&i2c_3 {
+	clocks = <&clock CLK_I2C3>;
+	clock-names = "i2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_bus>;
+};
+
+&hsi2c_4 {
+	clocks = <&clock CLK_USI0>;
+	clock-names = "hsi2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_hs_bus>;
+};
+
+&hsi2c_5 {
+	clocks = <&clock CLK_USI1>;
+	clock-names = "hsi2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c5_hs_bus>;
+};
+
+&hsi2c_6 {
+	clocks = <&clock CLK_USI2>;
+	clock-names = "hsi2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c6_hs_bus>;
+};
+
+&hsi2c_7 {
+	clocks = <&clock CLK_USI3>;
+	clock-names = "hsi2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c7_hs_bus>;
+};
+
 &mct {
 	clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
 	clock-names = "fin_pll", "mct";
@@ -156,6 +215,13 @@
 	clock-names = "timers";
 };
 
+&rtc {
+	clocks = <&clock CLK_RTC>;
+	clock-names = "rtc";
+	interrupt-parent = <&pmu_system_controller>;
+	status = "disabled";
+};
+
 &serial_0 {
 	clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
 	clock-names = "uart", "clk_uart_baud0";
-- 
2.5.0

WARNING: multiple messages have this Message-ID (diff)
From: krzk@kernel.org (Krzysztof Kozlowski)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 27/27] ARM: dts: exynos: Add RTC and I2C to Exynos5410
Date: Tue, 10 May 2016 22:09:30 +0200	[thread overview]
Message-ID: <1462910970-1812-28-git-send-email-krzk@kernel.org> (raw)
In-Reply-To: <1462910970-1812-1-git-send-email-krzk@kernel.org>

Configure Exynos5410-specific properties of RTC, I2C and HSI2C nodes.
This still does not enable them on the board level though.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 arch/arm/boot/dts/exynos5410.dtsi | 66 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 66 insertions(+)

diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi
index dd4d6d752865..ae64cb0a8efd 100644
--- a/arch/arm/boot/dts/exynos5410.dtsi
+++ b/arch/arm/boot/dts/exynos5410.dtsi
@@ -114,6 +114,9 @@
 			status = "disabled";
 		};
 
+		/* i2c_0-3 are defined in exynos5.dtsi */
+		/* hsi2c_4-7 are defined in exynos5xx.dtsi */
+
 		pinctrl_0: pinctrl at 13400000 {
 			compatible = "samsung,exynos5410-pinctrl";
 			reg = <0x13400000 0x1000>;
@@ -146,6 +149,62 @@
 	};
 };
 
+&i2c_0 {
+	clocks = <&clock CLK_I2C0>;
+	clock-names = "i2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_bus>;
+};
+
+&i2c_1 {
+	clocks = <&clock CLK_I2C1>;
+	clock-names = "i2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_bus>;
+};
+
+&i2c_2 {
+	clocks = <&clock CLK_I2C2>;
+	clock-names = "i2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_bus>;
+};
+
+&i2c_3 {
+	clocks = <&clock CLK_I2C3>;
+	clock-names = "i2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_bus>;
+};
+
+&hsi2c_4 {
+	clocks = <&clock CLK_USI0>;
+	clock-names = "hsi2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_hs_bus>;
+};
+
+&hsi2c_5 {
+	clocks = <&clock CLK_USI1>;
+	clock-names = "hsi2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c5_hs_bus>;
+};
+
+&hsi2c_6 {
+	clocks = <&clock CLK_USI2>;
+	clock-names = "hsi2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c6_hs_bus>;
+};
+
+&hsi2c_7 {
+	clocks = <&clock CLK_USI3>;
+	clock-names = "hsi2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c7_hs_bus>;
+};
+
 &mct {
 	clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
 	clock-names = "fin_pll", "mct";
@@ -156,6 +215,13 @@
 	clock-names = "timers";
 };
 
+&rtc {
+	clocks = <&clock CLK_RTC>;
+	clock-names = "rtc";
+	interrupt-parent = <&pmu_system_controller>;
+	status = "disabled";
+};
+
 &serial_0 {
 	clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
 	clock-names = "uart", "clk_uart_baud0";
-- 
2.5.0

  parent reply	other threads:[~2016-05-10 20:11 UTC|newest]

Thread overview: 76+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-05-10 20:09 [PATCH v3 00/27] ARM: dts: exynos: Add initial support for Odroid XU Krzysztof Kozlowski
2016-05-10 20:09 ` Krzysztof Kozlowski
2016-05-10 20:09 ` [PATCH v3 01/27] dt-bindings: clock: Add license and reformat Exynos5410 clock IDs Krzysztof Kozlowski
2016-05-10 20:09   ` Krzysztof Kozlowski
2016-05-10 20:09 ` [PATCH v3 02/27] dt-bindings: clock: Add PWM and USB clock IDs to Exynos5410 Krzysztof Kozlowski
2016-05-10 20:09   ` Krzysztof Kozlowski
2016-05-10 20:09 ` [PATCH v3 03/27] ARM: dts: exynos: Add fin_pll node for clock driver Krzysztof Kozlowski
2016-05-10 20:09   ` Krzysztof Kozlowski
2016-05-10 20:09 ` [PATCH v3 04/27] clk: samsung: exynos5410: Provide fin_pll external fixed clock Krzysztof Kozlowski
2016-05-10 20:09   ` Krzysztof Kozlowski
2016-05-10 20:09 ` [PATCH v3 05/27] ARM: dts: exynos: Switch MCT node to a new fin_pll clock Krzysztof Kozlowski
2016-05-10 20:09   ` Krzysztof Kozlowski
2016-05-10 20:09 ` [PATCH v3 06/27] ARM: dts: exynos: Remove old fixed-clock provider on SMDK5410 Krzysztof Kozlowski
2016-05-10 20:09   ` Krzysztof Kozlowski
2016-05-10 20:09 ` [PATCH v3 07/27] clk: samsung: exynos5410: Rename fin_pll from temporary to regular name Krzysztof Kozlowski
2016-05-10 20:09   ` Krzysztof Kozlowski
2016-05-10 20:09 ` [PATCH v3 08/27] clk: samsung: exynos5410: Add serial3, USB and PWM clocks Krzysztof Kozlowski
2016-05-10 20:09   ` Krzysztof Kozlowski
2016-05-10 20:09 ` [PATCH v3 09/27] ARM: dts: exynos: Re-order alphabetically Exynos5420 SD0/SD1 pinctrl nodes Krzysztof Kozlowski
2016-05-10 20:09   ` Krzysztof Kozlowski
2016-05-10 20:09 ` [PATCH v3 10/27] ARM: dts: exynos: Use lowercase for Exynos5410 CPU node labels Krzysztof Kozlowski
2016-05-10 20:09   ` Krzysztof Kozlowski
2016-05-10 20:09 ` [PATCH v3 11/27] ARM: dts: exynos: Configure Exynos5410 pinctrl for eMMC and SD card Krzysztof Kozlowski
2016-05-10 20:09   ` Krzysztof Kozlowski
2016-05-10 20:09 ` [PATCH v3 12/27] ARM: dts: exynos: Split Odroid XU3 LEDs to separate DTSI Krzysztof Kozlowski
2016-05-10 20:09   ` Krzysztof Kozlowski
2016-05-10 20:09 ` [PATCH v3 13/27] ARM: dts: exynos: Move common nodes to exynos5.dtsi Krzysztof Kozlowski
2016-05-10 20:09   ` Krzysztof Kozlowski
2016-05-10 20:09 ` [PATCH v3 14/27] ARM: dts: exynos: Prepare for inclusion of exynos5.dtsi in exynos5410.dtsi Krzysztof Kozlowski
2016-05-10 20:09   ` Krzysztof Kozlowski
2016-05-10 20:09 ` [PATCH v3 15/27] ARM: dts: exynos: Use phandle to get parent node in exynos5250-snow Krzysztof Kozlowski
2016-05-10 20:09   ` Krzysztof Kozlowski
2016-05-10 20:09 ` [PATCH v3 16/27] ARM: dts: exynos: Move Exynos5250 and Exynos5420 nodes under soc Krzysztof Kozlowski
2016-05-10 20:09 ` [PATCH v3 17/27] ARM: dts: exynos: Include common exynos5 in exynos5410.dtsi Krzysztof Kozlowski
2016-05-10 20:09   ` Krzysztof Kozlowski
2016-05-10 20:09 ` [PATCH v3 18/27] ARM: dts: exynos: Enable UART3 on Exynos5410 Krzysztof Kozlowski
2016-05-10 20:09   ` Krzysztof Kozlowski
2016-05-10 20:09 ` [PATCH v3 19/27] ARM: dts: exynos: MCT is not an interrupt controller and extend length of iomap Krzysztof Kozlowski
2016-05-10 20:09   ` Krzysztof Kozlowski
2016-05-10 20:09 ` [PATCH v3 20/27] ARM: dts: exynos: Move common Exynos5410/542x/5800 nodes to new DTSI Krzysztof Kozlowski
2016-05-10 20:09   ` Krzysztof Kozlowski
2016-05-10 20:09 ` [PATCH v3 21/27] ARM: dts: exynos: Add USB to Exynos5410 Krzysztof Kozlowski
2016-05-10 20:09   ` Krzysztof Kozlowski
2016-05-10 20:09 ` [PATCH v3 22/27] ARM: dts: exynos: Add initial support for Odroid XU board Krzysztof Kozlowski
2016-05-10 20:09   ` Krzysztof Kozlowski
2016-05-10 20:09 ` [PATCH v3 23/27] dt-bindings: clock: Add I2C, HSI2C and RTC clock IDs to Exynos5410 Krzysztof Kozlowski
2016-05-10 20:09   ` Krzysztof Kozlowski
2016-05-11 12:31   ` Javier Martinez Canillas
2016-05-11 12:31     ` Javier Martinez Canillas
2016-05-10 20:09 ` [PATCH v3 24/27] clk: samsung: exynos5410: Add I2C, HSI2C and RTC clocks Krzysztof Kozlowski
2016-05-10 20:09   ` Krzysztof Kozlowski
2016-05-11 12:32   ` Javier Martinez Canillas
2016-05-11 12:32     ` Javier Martinez Canillas
2016-05-10 20:09 ` [PATCH v3 25/27] ARM: dts: exynos: Move HSI2C nodes to exynos54xx.dtsi Krzysztof Kozlowski
2016-05-10 20:09   ` Krzysztof Kozlowski
2016-05-11 12:33   ` Javier Martinez Canillas
2016-05-11 12:33     ` Javier Martinez Canillas
2016-05-10 20:09 ` [PATCH v3 26/27] ARM: dts: exynos: Add I2C, PWM and UART pinctrl to Exynos5410 Krzysztof Kozlowski
2016-05-10 20:09   ` Krzysztof Kozlowski
2016-05-11 12:36   ` Javier Martinez Canillas
2016-05-11 12:36     ` Javier Martinez Canillas
2016-05-11 12:36     ` Javier Martinez Canillas
2016-05-10 20:09 ` Krzysztof Kozlowski [this message]
2016-05-10 20:09   ` [PATCH v3 27/27] ARM: dts: exynos: Add RTC and I2C " Krzysztof Kozlowski
2016-05-11 12:44   ` Javier Martinez Canillas
2016-05-11 12:44     ` Javier Martinez Canillas
2016-05-11 12:54     ` Krzysztof Kozlowski
2016-05-11 12:54       ` Krzysztof Kozlowski
2016-05-11 15:41 ` [PATCH v3 00/27] ARM: dts: exynos: Add initial support for Odroid XU Javier Martinez Canillas
2016-05-11 15:41   ` Javier Martinez Canillas
2016-05-11 18:14   ` Krzysztof Kozlowski
2016-05-11 18:14     ` Krzysztof Kozlowski
2016-05-13 12:03 ` Robin Murphy
2016-05-13 12:03   ` Robin Murphy
2016-05-13 12:11   ` Krzysztof Kozlowski
2016-05-13 12:11     ` Krzysztof Kozlowski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1462910970-1812-28-git-send-email-krzk@kernel.org \
    --to=krzk@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=javier@osg.samsung.com \
    --cc=k.kozlowski@samsung.com \
    --cc=kgene@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=robh+dt@kernel.org \
    --cc=s.nawrocki@samsung.com \
    --cc=sboyd@codeaurora.org \
    --cc=tomasz.figa@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.