From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932513AbcEKPhe (ORCPT ); Wed, 11 May 2016 11:37:34 -0400 Received: from mail-wm0-f67.google.com ([74.125.82.67]:34444 "EHLO mail-wm0-f67.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751912AbcEKPhb (ORCPT ); Wed, 11 May 2016 11:37:31 -0400 From: "M'boumba Cedric Madianga" To: mcoquelin.stm32@gmail.com, patrice.chotard@st.com, wsa@the-dreams.de, robh+dt@kernel.org, linux@arm.linux.org.uk, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-i2c@vger.kernel.org Cc: "M'boumba Cedric Madianga" Subject: [PATCH 2/5] i2c: Add STM32F4 I2C driver Date: Wed, 11 May 2016 17:36:11 +0200 Message-Id: <1462980974-22091-3-git-send-email-cedric.madianga@gmail.com> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1462980974-22091-1-git-send-email-cedric.madianga@gmail.com> References: <1462980974-22091-1-git-send-email-cedric.madianga@gmail.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org This patch adds support for the STM32F4 I2C controller. Signed-off-by: M'boumba Cedric Madianga --- drivers/i2c/busses/Kconfig | 10 + drivers/i2c/busses/Makefile | 1 + drivers/i2c/busses/i2c-stm32f4.c | 872 +++++++++++++++++++++++++++++++++++++++ 3 files changed, 883 insertions(+) create mode 100644 drivers/i2c/busses/i2c-stm32f4.c diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 2dd40dd..947894a 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -873,6 +873,16 @@ config I2C_ST This driver can also be built as module. If so, the module will be called i2c-st. +config I2C_STM32F4 + tristate "STMicroelectronics STM32F4 I2C support" + depends on ARCH_STM32 + help + Enable this option to add support for STM32 I2C controller embedded + in STM32F4 SoCs. + + This driver can also be built as module. If so, the module + will be called i2c-stm32f4. + config I2C_STU300 tristate "ST Microelectronics DDC I2C interface" depends on MACH_U300 diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index 37f2819..2ac0eb2 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -84,6 +84,7 @@ obj-$(CONFIG_I2C_SH_MOBILE) += i2c-sh_mobile.o obj-$(CONFIG_I2C_SIMTEC) += i2c-simtec.o obj-$(CONFIG_I2C_SIRF) += i2c-sirf.o obj-$(CONFIG_I2C_ST) += i2c-st.o +obj-$(CONFIG_I2C_STM32F4) += i2c-stm32f4.o obj-$(CONFIG_I2C_STU300) += i2c-stu300.o obj-$(CONFIG_I2C_SUN6I_P2WI) += i2c-sun6i-p2wi.o obj-$(CONFIG_I2C_TEGRA) += i2c-tegra.o diff --git a/drivers/i2c/busses/i2c-stm32f4.c b/drivers/i2c/busses/i2c-stm32f4.c new file mode 100644 index 0000000..4692213 --- /dev/null +++ b/drivers/i2c/busses/i2c-stm32f4.c @@ -0,0 +1,872 @@ +/* + * Driver for STMicroelectronics STM32 I2C controller + * + * Copyright (C) M'boumba Cedric Madianga 2015 + * Author: M'boumba Cedric Madianga + * + * This driver is based on st-i2c.c + * + * License terms: GNU General Public License (GPL), version 2 + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* STM32F4 I2C offset registers */ +#define STM32F4_I2C_CR1 0x00 +#define STM32F4_I2C_CR2 0x04 +#define STM32F4_I2C_DR 0x10 +#define STM32F4_I2C_SR1 0x14 +#define STM32F4_I2C_SR2 0x18 +#define STM32F4_I2C_CCR 0x1C +#define STM32F4_I2C_TRISE 0x20 +#define STM32F4_I2C_FLTR 0x24 + +/* STM32F4 I2C control 1*/ +#define STM32F4_I2C_CR1_SWRST BIT(15) +#define STM32F4_I2C_CR1_POS BIT(11) +#define STM32F4_I2C_CR1_ACK BIT(10) +#define STM32F4_I2C_CR1_STOP BIT(9) +#define STM32F4_I2C_CR1_START BIT(8) +#define STM32F4_I2C_CR1_PE BIT(0) + +/* STM32F4 I2C control 2 */ +#define STM32F4_I2C_CR2_FREQ_MASK GENMASK(5, 0) +#define STM32F4_I2C_CR2_FREQ(n) ((n & STM32F4_I2C_CR2_FREQ_MASK)) +#define STM32F4_I2C_CR2_ITBUFEN BIT(10) +#define STM32F4_I2C_CR2_ITEVTEN BIT(9) +#define STM32F4_I2C_CR2_ITERREN BIT(8) +#define STM32F4_I2C_CR2_IRQ_MASK (STM32F4_I2C_CR2_ITBUFEN \ + | STM32F4_I2C_CR2_ITEVTEN \ + | STM32F4_I2C_CR2_ITERREN) + +/* STM32F4 I2C Status 1 */ +#define STM32F4_I2C_SR1_AF BIT(10) +#define STM32F4_I2C_SR1_ARLO BIT(9) +#define STM32F4_I2C_SR1_BERR BIT(8) +#define STM32F4_I2C_SR1_TXE BIT(7) +#define STM32F4_I2C_SR1_RXNE BIT(6) +#define STM32F4_I2C_SR1_BTF BIT(2) +#define STM32F4_I2C_SR1_ADDR BIT(1) +#define STM32F4_I2C_SR1_SB BIT(0) +#define STM32F4_I2C_SR1_ITEVTEN_MASK (STM32F4_I2C_SR1_BTF \ + | STM32F4_I2C_SR1_ADDR \ + | STM32F4_I2C_SR1_SB) +#define STM32F4_I2C_SR1_ITBUFEN_MASK (STM32F4_I2C_SR1_TXE \ + | STM32F4_I2C_SR1_RXNE) +#define STM32F4_I2C_SR1_ITERREN_MASK (STM32F4_I2C_SR1_AF \ + | STM32F4_I2C_SR1_ARLO \ + | STM32F4_I2C_SR1_BERR) + +/* STM32F4 I2C Status 2 */ +#define STM32F4_I2C_SR2_BUSY BIT(1) + +/* STM32F4 I2C Control Clock */ +#define STM32F4_I2C_CCR_CCR_MASK GENMASK(11, 0) +#define STM32F4_I2C_CCR_CCR(n) ((n & STM32F4_I2C_CCR_CCR_MASK)) +#define STM32F4_I2C_CCR_FS BIT(15) +#define STM32F4_I2C_CCR_DUTY BIT(14) + +/* STM32F4 I2C Trise */ +#define STM32F4_I2C_TRISE_TRISE_MASK GENMASK(5, 0) +#define STM32F4_I2C_TRISE_TRISE(n) ((n & STM32F4_I2C_TRISE_TRISE_MASK)) + +/* STM32F4 I2C Filter */ +#define STM32F4_I2C_FLTR_DNF_MASK GENMASK(3, 0) +#define STM32F4_I2C_FLTR_DNF(n) ((n & STM32F4_I2C_FLTR_DNF_MASK)) +#define STM32F4_I2C_FLTR_ANOFF BIT(4) + +#define STM32F4_I2C_MAX_FREQ 0x2a +#define STM32F4_I2C_MIN_CCR 0x4 + +enum stm32f4_i2c_speed { + STM32F4_I2C_SPEED_STANDARD, /* 100 kHz */ + STM32F4_I2C_SPEED_FAST, /* 400 kHz */ + STM32F4_I2C_SPEED_END, +}; + +/** + * struct stm32f4_i2c_timings - per-Mode tuning parameters + * @rate: I2C bus rate + * @duty: Fast mode duty cycle + */ +struct stm32f4_i2c_timings { + u32 rate; + u32 duty; +}; + +/** + * struct stm32f4_i2c_client - client specific data + * @addr: 8-bit slave addr, including r/w bit + * @count: number of bytes to be transferred + * @buf: data buffer + * @result: result of the transfer + * @stop: last I2C msg to be sent, i.e. STOP to be generated + */ +struct stm32f4_i2c_client { + u8 addr; + u32 count; + u8 *buf; + int result; + bool stop; +}; + +/** + * struct stm32f4_i2c_dev - private data of the controller + * @adap: I2C adapter for this controller + * @dev: device for this controller + * @base: virtual memory area + * @complete: completion of I2C message + * @irq_event: interrupt event line for the controller + * @irq_error: interrupt error line for the controller + * @clk: hw i2c clock + * speed: I2C clock frequency of the controller. Standard or Fast only supported + * @client: I2C transfer information + * @busy: I2C transfer on-going + * @rst: I2C reset line + */ +struct stm32f4_i2c_dev { + struct i2c_adapter adap; + struct device *dev; + void __iomem *base; + struct completion complete; + int irq_event; + int irq_error; + struct clk *clk; + int speed; + struct stm32f4_i2c_client client; + bool busy; + struct reset_control *rst; +}; + +static struct stm32f4_i2c_timings i2c_timings[] = { + [STM32F4_I2C_SPEED_STANDARD] = { + .rate = 100000, + .duty = 0, + }, + [STM32F4_I2C_SPEED_FAST] = { + .rate = 400000, + .duty = 0, + }, +}; + +static inline void stm32f4_i2c_set_bits(void __iomem *reg, u32 mask) +{ + writel_relaxed(readl_relaxed(reg) | mask, reg); +} + +static inline void stm32f4_i2c_clr_bits(void __iomem *reg, u32 mask) +{ + writel_relaxed(readl_relaxed(reg) & ~mask, reg); +} + +static void stm32f4_i2c_soft_reset(struct stm32f4_i2c_dev *i2c_dev) +{ + void __iomem *reg = i2c_dev->base + STM32F4_I2C_CR1; + + stm32f4_i2c_set_bits(reg, STM32F4_I2C_CR1_SWRST); + stm32f4_i2c_clr_bits(reg, STM32F4_I2C_CR1_SWRST); +} + +static void stm32f4_i2c_set_periph_clk_freq(struct stm32f4_i2c_dev *i2c_dev) +{ + u32 clk_rate, cr2, freq; + + cr2 = readl_relaxed(i2c_dev->base + STM32F4_I2C_CR2); + cr2 &= ~STM32F4_I2C_CR2_FREQ_MASK; + + clk_rate = clk_get_rate(i2c_dev->clk); + + freq = clk_rate / 1000000; + if (freq > STM32F4_I2C_MAX_FREQ) + freq = STM32F4_I2C_MAX_FREQ; + + cr2 |= STM32F4_I2C_CR2_FREQ(freq); + writel_relaxed(cr2, i2c_dev->base + STM32F4_I2C_CR2); +} + +static void stm32f4_i2c_set_rise_time(struct stm32f4_i2c_dev *i2c_dev) +{ + u32 trise, freq, cr2; + + cr2 = readl_relaxed(i2c_dev->base + STM32F4_I2C_CR2); + freq = cr2 & STM32F4_I2C_CR2_FREQ_MASK; + + trise = readl_relaxed(i2c_dev->base + STM32F4_I2C_TRISE); + trise &= ~STM32F4_I2C_TRISE_TRISE_MASK; + + if (i2c_dev->speed == STM32F4_I2C_SPEED_STANDARD) + trise |= STM32F4_I2C_TRISE_TRISE((freq + 1)); + else + trise |= STM32F4_I2C_TRISE_TRISE((((freq * 300) / 1000) + 1)); + + writel_relaxed(trise, i2c_dev->base + STM32F4_I2C_TRISE); +} + +static void stm32f4_i2c_set_speed_mode(struct stm32f4_i2c_dev *i2c_dev) +{ + struct stm32f4_i2c_timings *t = &i2c_timings[i2c_dev->speed]; + u32 ccr, val, clk_rate; + + ccr = readl_relaxed(i2c_dev->base + STM32F4_I2C_CCR); + ccr &= ~(STM32F4_I2C_CCR_FS | STM32F4_I2C_CCR_DUTY | + STM32F4_I2C_CCR_CCR_MASK); + + clk_rate = clk_get_rate(i2c_dev->clk); + + switch (i2c_dev->speed) { + case STM32F4_I2C_SPEED_STANDARD: + val = clk_rate / t->rate * 2; + if (val < STM32F4_I2C_MIN_CCR) + ccr |= STM32F4_I2C_CCR_CCR(STM32F4_I2C_MIN_CCR); + else + ccr |= STM32F4_I2C_CCR_CCR(val); + break; + case STM32F4_I2C_SPEED_FAST: + ccr |= STM32F4_I2C_CCR_FS; + if (t->duty) { + ccr |= STM32F4_I2C_CCR_DUTY; + ccr |= STM32F4_I2C_CCR_CCR(clk_rate / t->rate * 25); + } else { + ccr |= STM32F4_I2C_CCR_CCR(clk_rate / t->rate * 3); + } + break; + default: + dev_err(i2c_dev->dev, "I2C speed mode not supported\n"); + } + + writel_relaxed(ccr, i2c_dev->base + STM32F4_I2C_CCR); +} + +static void stm32f4_i2c_set_filter(struct stm32f4_i2c_dev *i2c_dev) +{ + u32 filter; + + /* Enable analog noise filter and disable digital noise filter */ + filter = readl_relaxed(i2c_dev->base + STM32F4_I2C_FLTR); + filter &= ~(STM32F4_I2C_FLTR_ANOFF | STM32F4_I2C_FLTR_DNF_MASK); + writel_relaxed(filter, i2c_dev->base + STM32F4_I2C_FLTR); +} + +/** + * stm32f4_i2c_hw_config() - Prepare I2C block + * @i2c_dev: Controller's private data + */ +static void stm32f4_i2c_hw_config(struct stm32f4_i2c_dev *i2c_dev) +{ + void __iomem *reg = i2c_dev->base + STM32F4_I2C_CR1; + + /* Disable I2C */ + stm32f4_i2c_clr_bits(reg, STM32F4_I2C_CR1_PE); + + stm32f4_i2c_set_periph_clk_freq(i2c_dev); + + stm32f4_i2c_set_rise_time(i2c_dev); + + stm32f4_i2c_set_speed_mode(i2c_dev); + + stm32f4_i2c_set_filter(i2c_dev); + + /* Enable I2C */ + stm32f4_i2c_set_bits(reg, STM32F4_I2C_CR1_PE); +} + +static int stm32f4_i2c_wait_free_bus(struct stm32f4_i2c_dev *i2c_dev) +{ + u32 status; + int ret; + + ret = readl_relaxed_poll_timeout(i2c_dev->base + STM32F4_I2C_SR2, + status, + !(status & STM32F4_I2C_SR2_BUSY), + 10, 1000); + if (ret) { + dev_err(i2c_dev->dev, "bus not free\n"); + ret = -EBUSY; + } + + return ret; +} + +/** + * stm32f4_i2c_write_ byte() - Write a byte in the data register + * @i2c_dev: Controller's private data + * @byte: Data to write in the register + */ +static void stm32f4_i2c_write_byte(struct stm32f4_i2c_dev *i2c_dev, u8 byte) +{ + writel_relaxed(byte, i2c_dev->base + STM32F4_I2C_DR); +} + +/** + * stm32f4_i2c_write_msg() - Fill the data register in write mode + * @i2c_dev: Controller's private data + * + * This function fills the data register with I2C transfer buffer + */ +static void stm32f4_i2c_write_msg(struct stm32f4_i2c_dev *i2c_dev) +{ + struct stm32f4_i2c_client *c = &i2c_dev->client; + + stm32f4_i2c_write_byte(i2c_dev, *c->buf++); + c->count--; +} + +static void stm32f4_i2c_read_msg(struct stm32f4_i2c_dev *i2c_dev) +{ + struct stm32f4_i2c_client *c = &i2c_dev->client; + u32 rbuf; + + rbuf = readl_relaxed(i2c_dev->base + STM32F4_I2C_DR); + *c->buf++ = (u8)rbuf & 0xff; + c->count--; +} + +static void stm32f4_i2c_terminate_xfer(struct stm32f4_i2c_dev *i2c_dev) +{ + struct stm32f4_i2c_client *c = &i2c_dev->client; + void __iomem *reg = i2c_dev->base + STM32F4_I2C_CR2; + + /* Disable all interrupts */ + stm32f4_i2c_clr_bits(reg, STM32F4_I2C_CR2_IRQ_MASK); + + /* Set STOP or REPSTART */ + reg = i2c_dev->base + STM32F4_I2C_CR1; + if (c->stop) + stm32f4_i2c_set_bits(reg, STM32F4_I2C_CR1_STOP); + else + stm32f4_i2c_set_bits(reg, STM32F4_I2C_CR1_START); + + complete(&i2c_dev->complete); +} + +/** + * stm32f4_i2c_handle_write() - Handle FIFO empty interrupt in case of write + * @i2c_dev: Controller's private data + */ +static void stm32f4_i2c_handle_write(struct stm32f4_i2c_dev *i2c_dev) +{ + struct stm32f4_i2c_client *c = &i2c_dev->client; + void __iomem *reg = i2c_dev->base + STM32F4_I2C_CR2; + + if (c->count) { + stm32f4_i2c_write_msg(i2c_dev); + if (!c->count) { + /* Disable BUF interrupt */ + stm32f4_i2c_clr_bits(reg, STM32F4_I2C_CR2_ITBUFEN); + } + } else { + stm32f4_i2c_terminate_xfer(i2c_dev); + } +} + +/** + * stm32f4_i2c_handle_tx_btf() - Handle byte transfer finished interrupt + * in case of write + * @i2c_dev: Controller's private data + */ +static void stm32f4_i2c_handle_tx_btf(struct stm32f4_i2c_dev *i2c_dev) +{ + struct stm32f4_i2c_client *c = &i2c_dev->client; + + if (c->count) + stm32f4_i2c_write_msg(i2c_dev); + else + stm32f4_i2c_terminate_xfer(i2c_dev); +} + +/** + * stm32f4_i2c_handle_read() - Handle FIFO enmpty interrupt in case of read + * @i2c_dev: Controller's private data + */ +static void stm32f4_i2c_handle_read(struct stm32f4_i2c_dev *i2c_dev) +{ + struct stm32f4_i2c_client *c = &i2c_dev->client; + void __iomem *reg = i2c_dev->base + STM32F4_I2C_CR2; + + switch (c->count) { + case 1: + stm32f4_i2c_clr_bits(reg, STM32F4_I2C_CR2_IRQ_MASK); + stm32f4_i2c_read_msg(i2c_dev); + complete(&i2c_dev->complete); + break; + case 2: + case 3: + stm32f4_i2c_clr_bits(reg, STM32F4_I2C_CR2_ITBUFEN); + break; + default: + stm32f4_i2c_read_msg(i2c_dev); + } +} + +/** + * stm32f4_i2c_handle_rx_btf() - Handle byte transfer finished interrupt + * in case of read + * @i2c_dev: Controller's private data + */ +static void stm32f4_i2c_handle_rx_btf(struct stm32f4_i2c_dev *i2c_dev) +{ + struct stm32f4_i2c_client *c = &i2c_dev->client; + void __iomem *reg; + u32 mask; + int i; + + switch (c->count) { + case 2: + reg = i2c_dev->base + STM32F4_I2C_CR1; + /* Generate STOP or REPSTART */ + if (c->stop) + stm32f4_i2c_set_bits(reg, STM32F4_I2C_CR1_STOP); + else + stm32f4_i2c_set_bits(reg, STM32F4_I2C_CR1_START); + + /* Read two last data bytes */ + for (i = 2; i > 0; i--) + stm32f4_i2c_read_msg(i2c_dev); + + /* Disable EVT and ERR interrupt */ + reg = i2c_dev->base + STM32F4_I2C_CR2; + mask = STM32F4_I2C_CR2_ITEVTEN | STM32F4_I2C_CR2_ITERREN; + stm32f4_i2c_clr_bits(reg, mask); + + complete(&i2c_dev->complete); + break; + case 3: + /* Enable ACK and read data */ + reg = i2c_dev->base + STM32F4_I2C_CR1; + stm32f4_i2c_clr_bits(reg, STM32F4_I2C_CR1_ACK); + stm32f4_i2c_read_msg(i2c_dev); + break; + default: + stm32f4_i2c_read_msg(i2c_dev); + } +} + +/** + * stm32f4_i2c_handle_rx_addr() - Handle address matched interrupt in case of + * master receiver + * @i2c_dev: Controller's private data + */ +static void stm32f4_i2c_handle_rx_addr(struct stm32f4_i2c_dev *i2c_dev) +{ + struct stm32f4_i2c_client *c = &i2c_dev->client; + void __iomem *reg; + u32 sr2; + + switch (c->count) { + case 0: + stm32f4_i2c_terminate_xfer(i2c_dev); + /* Clear ADDR flag */ + sr2 = readl_relaxed(i2c_dev->base + STM32F4_I2C_SR2); + break; + case 1: + /* + * Single byte reception: + * Enable NACK, clear ADDR flag and generate STOP or RepSTART + */ + reg = i2c_dev->base + STM32F4_I2C_CR1; + stm32f4_i2c_clr_bits(reg, STM32F4_I2C_CR1_ACK); + sr2 = readl_relaxed(i2c_dev->base + STM32F4_I2C_SR2); + if (c->stop) + stm32f4_i2c_set_bits(reg, STM32F4_I2C_CR1_STOP); + else + stm32f4_i2c_set_bits(reg, STM32F4_I2C_CR1_START); + break; + case 2: + /* + * 2-byte reception: + * Enable NACK and PEC Position Ack and clear ADDR flag + */ + reg = i2c_dev->base + STM32F4_I2C_CR1; + stm32f4_i2c_clr_bits(reg, STM32F4_I2C_CR1_ACK); + stm32f4_i2c_set_bits(reg, STM32F4_I2C_CR1_POS); + sr2 = readl_relaxed(i2c_dev->base + STM32F4_I2C_SR2); + break; + + default: + /* N-byte reception: Enable ACK and clear ADDR flag */ + reg = i2c_dev->base + STM32F4_I2C_CR1; + stm32f4_i2c_set_bits(reg, STM32F4_I2C_CR1_ACK); + sr2 = readl_relaxed(i2c_dev->base + STM32F4_I2C_SR2); + break; + } +} + +/** + * stm32f4_i2c_isr_event() - Interrupt routine for I2C bus event + * @irq: interrupt number + * @data: Controller's private data + */ +static irqreturn_t stm32f4_i2c_isr_event(int irq, void *data) +{ + struct stm32f4_i2c_dev *i2c_dev = data; + struct stm32f4_i2c_client *c = &i2c_dev->client; + void __iomem *reg; + u32 real_status, possible_status, ien, sr2; + int flag; + + ien = readl_relaxed(i2c_dev->base + STM32F4_I2C_CR2); + ien &= STM32F4_I2C_CR2_IRQ_MASK; + + /* Check possible status combinations */ + if (ien & STM32F4_I2C_CR2_ITEVTEN) { + possible_status = STM32F4_I2C_SR1_ITEVTEN_MASK; + if (ien & STM32F4_I2C_CR2_ITBUFEN) + possible_status |= STM32F4_I2C_SR1_ITBUFEN_MASK; + } + + real_status = readl_relaxed(i2c_dev->base + STM32F4_I2C_SR1); + + if (!(real_status & possible_status)) { + dev_dbg(i2c_dev->dev, + "spurious evt it (status=0x%08x, ien=0x%08x)\n", + real_status, ien); + return IRQ_NONE; + } + + /* Use __fls() to check error bits first */ + flag = __fls(real_status & possible_status); + + switch (1 << flag) { + case STM32F4_I2C_SR1_SB: + stm32f4_i2c_write_byte(i2c_dev, c->addr); + break; + + case STM32F4_I2C_SR1_ADDR: + if (c->addr & I2C_M_RD) + stm32f4_i2c_handle_rx_addr(i2c_dev); + else + sr2 = readl_relaxed(i2c_dev->base + STM32F4_I2C_SR2); + + /* Enable ITBUF interrupts */ + reg = i2c_dev->base + STM32F4_I2C_CR2; + stm32f4_i2c_set_bits(reg, STM32F4_I2C_CR2_ITBUFEN); + break; + + case STM32F4_I2C_SR1_BTF: + if (c->addr & I2C_M_RD) + stm32f4_i2c_handle_rx_btf(i2c_dev); + else + stm32f4_i2c_handle_tx_btf(i2c_dev); + break; + + case STM32F4_I2C_SR1_TXE: + stm32f4_i2c_handle_write(i2c_dev); + break; + + case STM32F4_I2C_SR1_RXNE: + stm32f4_i2c_handle_read(i2c_dev); + break; + + default: + dev_err(i2c_dev->dev, + "evt it unhandled: status=0x%08x)\n", real_status); + return IRQ_NONE; + } + + return IRQ_HANDLED; +} + +/** + * stm32f4_i2c_isr_error() - Interrupt routine for I2C bus error + * @irq: interrupt number + * @data: Controller's private data + */ +static irqreturn_t stm32f4_i2c_isr_error(int irq, void *data) +{ + struct stm32f4_i2c_dev *i2c_dev = data; + struct stm32f4_i2c_client *c = &i2c_dev->client; + void __iomem *reg; + u32 real_status, possible_status, ien; + int flag; + + ien = readl_relaxed(i2c_dev->base + STM32F4_I2C_CR2); + ien &= STM32F4_I2C_CR2_IRQ_MASK; + + /* Check possible status combinations */ + if (ien & STM32F4_I2C_CR2_ITERREN) + possible_status = STM32F4_I2C_SR1_ITERREN_MASK; + + real_status = readl_relaxed(i2c_dev->base + STM32F4_I2C_SR1); + + if (!(real_status & possible_status)) { + dev_dbg(i2c_dev->dev, + "spurious err it (status=0x%08x, ien=0x%08x)\n", + real_status, ien); + return IRQ_NONE; + } + + /* Use __fls() to check error bits first */ + flag = __fls(real_status & possible_status); + + switch (1 << flag) { + case STM32F4_I2C_SR1_BERR: + reg = i2c_dev->base + STM32F4_I2C_SR1; + stm32f4_i2c_clr_bits(reg, STM32F4_I2C_SR1_BERR); + c->result = -EIO; + break; + + case STM32F4_I2C_SR1_ARLO: + reg = i2c_dev->base + STM32F4_I2C_SR1; + stm32f4_i2c_clr_bits(reg, STM32F4_I2C_SR1_ARLO); + c->result = -EAGAIN; + break; + + case STM32F4_I2C_SR1_AF: + reg = i2c_dev->base + STM32F4_I2C_CR1; + stm32f4_i2c_set_bits(reg, STM32F4_I2C_CR1_STOP); + c->result = -EIO; + break; + + default: + dev_err(i2c_dev->dev, + "err it unhandled: status=0x%08x)\n", real_status); + return IRQ_NONE; + } + + /* Reset I2C */ + stm32f4_i2c_soft_reset(i2c_dev); + + /* Disable interrupts */ + reg = i2c_dev->base + STM32F4_I2C_CR2; + stm32f4_i2c_clr_bits(reg, STM32F4_I2C_CR2_IRQ_MASK); + + complete(&i2c_dev->complete); + + return IRQ_HANDLED; +} + +/** + * stm32f4_i2c_xfer_msg() - Transfer a single I2C message + * @i2c_dev: Controller's private data + * @msg: I2C message to transfer + * @is_first: first message of the sequence + * @is_last: last message of the sequence + */ +static int stm32f4_i2c_xfer_msg(struct stm32f4_i2c_dev *i2c_dev, + struct i2c_msg *msg, bool is_first, + bool is_last) +{ + struct stm32f4_i2c_client *c = &i2c_dev->client; + void __iomem *reg = i2c_dev->base + STM32F4_I2C_CR1; + unsigned long timeout; + u32 mask; + int ret; + + c->addr = (u8)(msg->addr << 1); + c->addr |= (msg->flags & I2C_M_RD); + c->buf = msg->buf; + c->count = msg->len; + c->result = 0; + c->stop = is_last; + + reinit_completion(&i2c_dev->complete); + + /* Enable ITEVT and ITERR interrupts */ + mask = STM32F4_I2C_CR2_ITEVTEN | STM32F4_I2C_CR2_ITERREN; + stm32f4_i2c_set_bits(i2c_dev->base + STM32F4_I2C_CR2, mask); + + if (is_first) { + ret = stm32f4_i2c_wait_free_bus(i2c_dev); + if (ret) + return ret; + + /* START generation */ + stm32f4_i2c_set_bits(reg, STM32F4_I2C_CR1_START); + } + + timeout = wait_for_completion_timeout(&i2c_dev->complete, + i2c_dev->adap.timeout); + ret = c->result; + + /* Disable PEC position Ack */ + stm32f4_i2c_clr_bits(reg, STM32F4_I2C_CR1_POS); + + if (!timeout) { + dev_err(i2c_dev->dev, "Access to slave 0x%x timed out\n", + c->addr >> 1); + ret = -ETIMEDOUT; + } + + return ret; +} + +/** + * stm32f4_i2c_xfer() - Transfer combined I2C message + * @i2c_adap: Adapter pointer to the controller + * @msgs: Pointer to data to be written. + * @num: Number of messages to be executed + */ +static int stm32f4_i2c_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg msgs[], + int num) +{ + struct stm32f4_i2c_dev *i2c_dev = i2c_get_adapdata(i2c_adap); + int ret, i; + + i2c_dev->busy = true; + + ret = clk_prepare_enable(i2c_dev->clk); + if (ret) { + dev_err(i2c_dev->dev, "Failed to prepare_enable clock\n"); + return ret; + } + + stm32f4_i2c_hw_config(i2c_dev); + + for (i = 0; i < num && !ret; i++) + ret = stm32f4_i2c_xfer_msg(i2c_dev, &msgs[i], i == 0, + i == num - 1); + + clk_disable_unprepare(i2c_dev->clk); + + i2c_dev->busy = false; + + return (ret < 0) ? ret : i; +} + +static u32 stm32f4_i2c_func(struct i2c_adapter *adap) +{ + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; +} + +static struct i2c_algorithm stm32f4_i2c_algo = { + .master_xfer = stm32f4_i2c_xfer, + .functionality = stm32f4_i2c_func, +}; + +static int stm32f4_i2c_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct stm32f4_i2c_dev *i2c_dev; + struct resource *res; + u32 clk_rate; + struct i2c_adapter *adap; + int ret; + + i2c_dev = devm_kzalloc(&pdev->dev, sizeof(*i2c_dev), GFP_KERNEL); + if (!i2c_dev) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + i2c_dev->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(i2c_dev->base)) + return PTR_ERR(i2c_dev->base); + + i2c_dev->irq_event = irq_of_parse_and_map(np, 0); + if (!i2c_dev->irq_event) { + dev_err(&pdev->dev, "IRQ missing or invalid\n"); + return -EINVAL; + } + + i2c_dev->irq_error = irq_of_parse_and_map(np, 1); + if (!i2c_dev->irq_error) { + dev_err(&pdev->dev, "IRQ missing or invalid\n"); + return -EINVAL; + } + + i2c_dev->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(i2c_dev->clk)) { + dev_err(&pdev->dev, "Error: Missing controller clock\n"); + return PTR_ERR(i2c_dev->clk); + } + + i2c_dev->rst = devm_reset_control_get(&pdev->dev, NULL); + if (IS_ERR(i2c_dev->rst)) { + dev_err(&pdev->dev, "Error: Missing controller reset\n"); + return PTR_ERR(i2c_dev->rst); + } + + reset_control_assert(i2c_dev->rst); + udelay(2); + reset_control_deassert(i2c_dev->rst); + + i2c_dev->speed = STM32F4_I2C_SPEED_STANDARD; + ret = of_property_read_u32(np, "clock-frequency", &clk_rate); + if ((!ret) && (clk_rate == 400000)) + i2c_dev->speed = STM32F4_I2C_SPEED_FAST; + + i2c_dev->dev = &pdev->dev; + + ret = devm_request_threaded_irq(&pdev->dev, i2c_dev->irq_event, + NULL, stm32f4_i2c_isr_event, + IRQF_ONESHOT, pdev->name, i2c_dev); + if (ret) { + dev_err(&pdev->dev, "Failed to request irq %i\n", + i2c_dev->irq_error); + return ret; + } + + ret = devm_request_threaded_irq(&pdev->dev, i2c_dev->irq_error, + NULL, stm32f4_i2c_isr_error, + IRQF_ONESHOT, pdev->name, i2c_dev); + if (ret) { + dev_err(&pdev->dev, "Failed to request irq %i\n", + i2c_dev->irq_error); + return ret; + } + + adap = &i2c_dev->adap; + i2c_set_adapdata(adap, i2c_dev); + snprintf(adap->name, sizeof(adap->name), "STM32 I2C(%pa)", &res->start); + adap->owner = THIS_MODULE; + adap->timeout = 2 * HZ; + adap->retries = 0; + adap->algo = &stm32f4_i2c_algo; + adap->dev.parent = &pdev->dev; + adap->dev.of_node = pdev->dev.of_node; + + init_completion(&i2c_dev->complete); + + ret = i2c_add_adapter(adap); + if (ret) { + dev_err(&pdev->dev, "Failed to add adapter\n"); + return ret; + } + + platform_set_drvdata(pdev, i2c_dev); + + dev_info(i2c_dev->dev, "STM32F4 I2C driver initialized\n"); + + return 0; +} + +static int stm32f4_i2c_remove(struct platform_device *pdev) +{ + struct stm32f4_i2c_dev *i2c_dev = platform_get_drvdata(pdev); + + i2c_del_adapter(&i2c_dev->adap); + + return 0; +} + +static const struct of_device_id stm32f4_i2c_match[] = { + { .compatible = "st,i2c-stm32f4", }, + {}, +}; +MODULE_DEVICE_TABLE(of, stm32f4_i2c_match); + +static struct platform_driver stm32f4_i2c_driver = { + .driver = { + .name = "i2c-stm32f4", + .of_match_table = stm32f4_i2c_match, + }, + .probe = stm32f4_i2c_probe, + .remove = stm32f4_i2c_remove, +}; + +module_platform_driver(stm32f4_i2c_driver); + +MODULE_AUTHOR("M'boumba Cedric Madianga "); +MODULE_DESCRIPTION("STMicroelectronics STM32F4 I2C driver"); +MODULE_LICENSE("GPL v2"); -- 1.9.1 From mboxrd@z Thu Jan 1 00:00:00 1970 From: cedric.madianga@gmail.com (M'boumba Cedric Madianga) Date: Wed, 11 May 2016 17:36:11 +0200 Subject: [PATCH 2/5] i2c: Add STM32F4 I2C driver In-Reply-To: <1462980974-22091-1-git-send-email-cedric.madianga@gmail.com> References: <1462980974-22091-1-git-send-email-cedric.madianga@gmail.com> Message-ID: <1462980974-22091-3-git-send-email-cedric.madianga@gmail.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org This patch adds support for the STM32F4 I2C controller. Signed-off-by: M'boumba Cedric Madianga --- drivers/i2c/busses/Kconfig | 10 + drivers/i2c/busses/Makefile | 1 + drivers/i2c/busses/i2c-stm32f4.c | 872 +++++++++++++++++++++++++++++++++++++++ 3 files changed, 883 insertions(+) create mode 100644 drivers/i2c/busses/i2c-stm32f4.c diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 2dd40dd..947894a 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -873,6 +873,16 @@ config I2C_ST This driver can also be built as module. If so, the module will be called i2c-st. +config I2C_STM32F4 + tristate "STMicroelectronics STM32F4 I2C support" + depends on ARCH_STM32 + help + Enable this option to add support for STM32 I2C controller embedded + in STM32F4 SoCs. + + This driver can also be built as module. If so, the module + will be called i2c-stm32f4. + config I2C_STU300 tristate "ST Microelectronics DDC I2C interface" depends on MACH_U300 diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index 37f2819..2ac0eb2 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -84,6 +84,7 @@ obj-$(CONFIG_I2C_SH_MOBILE) += i2c-sh_mobile.o obj-$(CONFIG_I2C_SIMTEC) += i2c-simtec.o obj-$(CONFIG_I2C_SIRF) += i2c-sirf.o obj-$(CONFIG_I2C_ST) += i2c-st.o +obj-$(CONFIG_I2C_STM32F4) += i2c-stm32f4.o obj-$(CONFIG_I2C_STU300) += i2c-stu300.o obj-$(CONFIG_I2C_SUN6I_P2WI) += i2c-sun6i-p2wi.o obj-$(CONFIG_I2C_TEGRA) += i2c-tegra.o diff --git a/drivers/i2c/busses/i2c-stm32f4.c b/drivers/i2c/busses/i2c-stm32f4.c new file mode 100644 index 0000000..4692213 --- /dev/null +++ b/drivers/i2c/busses/i2c-stm32f4.c @@ -0,0 +1,872 @@ +/* + * Driver for STMicroelectronics STM32 I2C controller + * + * Copyright (C) M'boumba Cedric Madianga 2015 + * Author: M'boumba Cedric Madianga + * + * This driver is based on st-i2c.c + * + * License terms: GNU General Public License (GPL), version 2 + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* STM32F4 I2C offset registers */ +#define STM32F4_I2C_CR1 0x00 +#define STM32F4_I2C_CR2 0x04 +#define STM32F4_I2C_DR 0x10 +#define STM32F4_I2C_SR1 0x14 +#define STM32F4_I2C_SR2 0x18 +#define STM32F4_I2C_CCR 0x1C +#define STM32F4_I2C_TRISE 0x20 +#define STM32F4_I2C_FLTR 0x24 + +/* STM32F4 I2C control 1*/ +#define STM32F4_I2C_CR1_SWRST BIT(15) +#define STM32F4_I2C_CR1_POS BIT(11) +#define STM32F4_I2C_CR1_ACK BIT(10) +#define STM32F4_I2C_CR1_STOP BIT(9) +#define STM32F4_I2C_CR1_START BIT(8) +#define STM32F4_I2C_CR1_PE BIT(0) + +/* STM32F4 I2C control 2 */ +#define STM32F4_I2C_CR2_FREQ_MASK GENMASK(5, 0) +#define STM32F4_I2C_CR2_FREQ(n) ((n & STM32F4_I2C_CR2_FREQ_MASK)) +#define STM32F4_I2C_CR2_ITBUFEN BIT(10) +#define STM32F4_I2C_CR2_ITEVTEN BIT(9) +#define STM32F4_I2C_CR2_ITERREN BIT(8) +#define STM32F4_I2C_CR2_IRQ_MASK (STM32F4_I2C_CR2_ITBUFEN \ + | STM32F4_I2C_CR2_ITEVTEN \ + | STM32F4_I2C_CR2_ITERREN) + +/* STM32F4 I2C Status 1 */ +#define STM32F4_I2C_SR1_AF BIT(10) +#define STM32F4_I2C_SR1_ARLO BIT(9) +#define STM32F4_I2C_SR1_BERR BIT(8) +#define STM32F4_I2C_SR1_TXE BIT(7) +#define STM32F4_I2C_SR1_RXNE BIT(6) +#define STM32F4_I2C_SR1_BTF BIT(2) +#define STM32F4_I2C_SR1_ADDR BIT(1) +#define STM32F4_I2C_SR1_SB BIT(0) +#define STM32F4_I2C_SR1_ITEVTEN_MASK (STM32F4_I2C_SR1_BTF \ + | STM32F4_I2C_SR1_ADDR \ + | STM32F4_I2C_SR1_SB) +#define STM32F4_I2C_SR1_ITBUFEN_MASK (STM32F4_I2C_SR1_TXE \ + | STM32F4_I2C_SR1_RXNE) +#define STM32F4_I2C_SR1_ITERREN_MASK (STM32F4_I2C_SR1_AF \ + | STM32F4_I2C_SR1_ARLO \ + | STM32F4_I2C_SR1_BERR) + +/* STM32F4 I2C Status 2 */ +#define STM32F4_I2C_SR2_BUSY BIT(1) + +/* STM32F4 I2C Control Clock */ +#define STM32F4_I2C_CCR_CCR_MASK GENMASK(11, 0) +#define STM32F4_I2C_CCR_CCR(n) ((n & STM32F4_I2C_CCR_CCR_MASK)) +#define STM32F4_I2C_CCR_FS BIT(15) +#define STM32F4_I2C_CCR_DUTY BIT(14) + +/* STM32F4 I2C Trise */ +#define STM32F4_I2C_TRISE_TRISE_MASK GENMASK(5, 0) +#define STM32F4_I2C_TRISE_TRISE(n) ((n & STM32F4_I2C_TRISE_TRISE_MASK)) + +/* STM32F4 I2C Filter */ +#define STM32F4_I2C_FLTR_DNF_MASK GENMASK(3, 0) +#define STM32F4_I2C_FLTR_DNF(n) ((n & STM32F4_I2C_FLTR_DNF_MASK)) +#define STM32F4_I2C_FLTR_ANOFF BIT(4) + +#define STM32F4_I2C_MAX_FREQ 0x2a +#define STM32F4_I2C_MIN_CCR 0x4 + +enum stm32f4_i2c_speed { + STM32F4_I2C_SPEED_STANDARD, /* 100 kHz */ + STM32F4_I2C_SPEED_FAST, /* 400 kHz */ + STM32F4_I2C_SPEED_END, +}; + +/** + * struct stm32f4_i2c_timings - per-Mode tuning parameters + * @rate: I2C bus rate + * @duty: Fast mode duty cycle + */ +struct stm32f4_i2c_timings { + u32 rate; + u32 duty; +}; + +/** + * struct stm32f4_i2c_client - client specific data + * @addr: 8-bit slave addr, including r/w bit + * @count: number of bytes to be transferred + * @buf: data buffer + * @result: result of the transfer + * @stop: last I2C msg to be sent, i.e. STOP to be generated + */ +struct stm32f4_i2c_client { + u8 addr; + u32 count; + u8 *buf; + int result; + bool stop; +}; + +/** + * struct stm32f4_i2c_dev - private data of the controller + * @adap: I2C adapter for this controller + * @dev: device for this controller + * @base: virtual memory area + * @complete: completion of I2C message + * @irq_event: interrupt event line for the controller + * @irq_error: interrupt error line for the controller + * @clk: hw i2c clock + * speed: I2C clock frequency of the controller. Standard or Fast only supported + * @client: I2C transfer information + * @busy: I2C transfer on-going + * @rst: I2C reset line + */ +struct stm32f4_i2c_dev { + struct i2c_adapter adap; + struct device *dev; + void __iomem *base; + struct completion complete; + int irq_event; + int irq_error; + struct clk *clk; + int speed; + struct stm32f4_i2c_client client; + bool busy; + struct reset_control *rst; +}; + +static struct stm32f4_i2c_timings i2c_timings[] = { + [STM32F4_I2C_SPEED_STANDARD] = { + .rate = 100000, + .duty = 0, + }, + [STM32F4_I2C_SPEED_FAST] = { + .rate = 400000, + .duty = 0, + }, +}; + +static inline void stm32f4_i2c_set_bits(void __iomem *reg, u32 mask) +{ + writel_relaxed(readl_relaxed(reg) | mask, reg); +} + +static inline void stm32f4_i2c_clr_bits(void __iomem *reg, u32 mask) +{ + writel_relaxed(readl_relaxed(reg) & ~mask, reg); +} + +static void stm32f4_i2c_soft_reset(struct stm32f4_i2c_dev *i2c_dev) +{ + void __iomem *reg = i2c_dev->base + STM32F4_I2C_CR1; + + stm32f4_i2c_set_bits(reg, STM32F4_I2C_CR1_SWRST); + stm32f4_i2c_clr_bits(reg, STM32F4_I2C_CR1_SWRST); +} + +static void stm32f4_i2c_set_periph_clk_freq(struct stm32f4_i2c_dev *i2c_dev) +{ + u32 clk_rate, cr2, freq; + + cr2 = readl_relaxed(i2c_dev->base + STM32F4_I2C_CR2); + cr2 &= ~STM32F4_I2C_CR2_FREQ_MASK; + + clk_rate = clk_get_rate(i2c_dev->clk); + + freq = clk_rate / 1000000; + if (freq > STM32F4_I2C_MAX_FREQ) + freq = STM32F4_I2C_MAX_FREQ; + + cr2 |= STM32F4_I2C_CR2_FREQ(freq); + writel_relaxed(cr2, i2c_dev->base + STM32F4_I2C_CR2); +} + +static void stm32f4_i2c_set_rise_time(struct stm32f4_i2c_dev *i2c_dev) +{ + u32 trise, freq, cr2; + + cr2 = readl_relaxed(i2c_dev->base + STM32F4_I2C_CR2); + freq = cr2 & STM32F4_I2C_CR2_FREQ_MASK; + + trise = readl_relaxed(i2c_dev->base + STM32F4_I2C_TRISE); + trise &= ~STM32F4_I2C_TRISE_TRISE_MASK; + + if (i2c_dev->speed == STM32F4_I2C_SPEED_STANDARD) + trise |= STM32F4_I2C_TRISE_TRISE((freq + 1)); + else + trise |= STM32F4_I2C_TRISE_TRISE((((freq * 300) / 1000) + 1)); + + writel_relaxed(trise, i2c_dev->base + STM32F4_I2C_TRISE); +} + +static void stm32f4_i2c_set_speed_mode(struct stm32f4_i2c_dev *i2c_dev) +{ + struct stm32f4_i2c_timings *t = &i2c_timings[i2c_dev->speed]; + u32 ccr, val, clk_rate; + + ccr = readl_relaxed(i2c_dev->base + STM32F4_I2C_CCR); + ccr &= ~(STM32F4_I2C_CCR_FS | STM32F4_I2C_CCR_DUTY | + STM32F4_I2C_CCR_CCR_MASK); + + clk_rate = clk_get_rate(i2c_dev->clk); + + switch (i2c_dev->speed) { + case STM32F4_I2C_SPEED_STANDARD: + val = clk_rate / t->rate * 2; + if (val < STM32F4_I2C_MIN_CCR) + ccr |= STM32F4_I2C_CCR_CCR(STM32F4_I2C_MIN_CCR); + else + ccr |= STM32F4_I2C_CCR_CCR(val); + break; + case STM32F4_I2C_SPEED_FAST: + ccr |= STM32F4_I2C_CCR_FS; + if (t->duty) { + ccr |= STM32F4_I2C_CCR_DUTY; + ccr |= STM32F4_I2C_CCR_CCR(clk_rate / t->rate * 25); + } else { + ccr |= STM32F4_I2C_CCR_CCR(clk_rate / t->rate * 3); + } + break; + default: + dev_err(i2c_dev->dev, "I2C speed mode not supported\n"); + } + + writel_relaxed(ccr, i2c_dev->base + STM32F4_I2C_CCR); +} + +static void stm32f4_i2c_set_filter(struct stm32f4_i2c_dev *i2c_dev) +{ + u32 filter; + + /* Enable analog noise filter and disable digital noise filter */ + filter = readl_relaxed(i2c_dev->base + STM32F4_I2C_FLTR); + filter &= ~(STM32F4_I2C_FLTR_ANOFF | STM32F4_I2C_FLTR_DNF_MASK); + writel_relaxed(filter, i2c_dev->base + STM32F4_I2C_FLTR); +} + +/** + * stm32f4_i2c_hw_config() - Prepare I2C block + * @i2c_dev: Controller's private data + */ +static void stm32f4_i2c_hw_config(struct stm32f4_i2c_dev *i2c_dev) +{ + void __iomem *reg = i2c_dev->base + STM32F4_I2C_CR1; + + /* Disable I2C */ + stm32f4_i2c_clr_bits(reg, STM32F4_I2C_CR1_PE); + + stm32f4_i2c_set_periph_clk_freq(i2c_dev); + + stm32f4_i2c_set_rise_time(i2c_dev); + + stm32f4_i2c_set_speed_mode(i2c_dev); + + stm32f4_i2c_set_filter(i2c_dev); + + /* Enable I2C */ + stm32f4_i2c_set_bits(reg, STM32F4_I2C_CR1_PE); +} + +static int stm32f4_i2c_wait_free_bus(struct stm32f4_i2c_dev *i2c_dev) +{ + u32 status; + int ret; + + ret = readl_relaxed_poll_timeout(i2c_dev->base + STM32F4_I2C_SR2, + status, + !(status & STM32F4_I2C_SR2_BUSY), + 10, 1000); + if (ret) { + dev_err(i2c_dev->dev, "bus not free\n"); + ret = -EBUSY; + } + + return ret; +} + +/** + * stm32f4_i2c_write_ byte() - Write a byte in the data register + * @i2c_dev: Controller's private data + * @byte: Data to write in the register + */ +static void stm32f4_i2c_write_byte(struct stm32f4_i2c_dev *i2c_dev, u8 byte) +{ + writel_relaxed(byte, i2c_dev->base + STM32F4_I2C_DR); +} + +/** + * stm32f4_i2c_write_msg() - Fill the data register in write mode + * @i2c_dev: Controller's private data + * + * This function fills the data register with I2C transfer buffer + */ +static void stm32f4_i2c_write_msg(struct stm32f4_i2c_dev *i2c_dev) +{ + struct stm32f4_i2c_client *c = &i2c_dev->client; + + stm32f4_i2c_write_byte(i2c_dev, *c->buf++); + c->count--; +} + +static void stm32f4_i2c_read_msg(struct stm32f4_i2c_dev *i2c_dev) +{ + struct stm32f4_i2c_client *c = &i2c_dev->client; + u32 rbuf; + + rbuf = readl_relaxed(i2c_dev->base + STM32F4_I2C_DR); + *c->buf++ = (u8)rbuf & 0xff; + c->count--; +} + +static void stm32f4_i2c_terminate_xfer(struct stm32f4_i2c_dev *i2c_dev) +{ + struct stm32f4_i2c_client *c = &i2c_dev->client; + void __iomem *reg = i2c_dev->base + STM32F4_I2C_CR2; + + /* Disable all interrupts */ + stm32f4_i2c_clr_bits(reg, STM32F4_I2C_CR2_IRQ_MASK); + + /* Set STOP or REPSTART */ + reg = i2c_dev->base + STM32F4_I2C_CR1; + if (c->stop) + stm32f4_i2c_set_bits(reg, STM32F4_I2C_CR1_STOP); + else + stm32f4_i2c_set_bits(reg, STM32F4_I2C_CR1_START); + + complete(&i2c_dev->complete); +} + +/** + * stm32f4_i2c_handle_write() - Handle FIFO empty interrupt in case of write + * @i2c_dev: Controller's private data + */ +static void stm32f4_i2c_handle_write(struct stm32f4_i2c_dev *i2c_dev) +{ + struct stm32f4_i2c_client *c = &i2c_dev->client; + void __iomem *reg = i2c_dev->base + STM32F4_I2C_CR2; + + if (c->count) { + stm32f4_i2c_write_msg(i2c_dev); + if (!c->count) { + /* Disable BUF interrupt */ + stm32f4_i2c_clr_bits(reg, STM32F4_I2C_CR2_ITBUFEN); + } + } else { + stm32f4_i2c_terminate_xfer(i2c_dev); + } +} + +/** + * stm32f4_i2c_handle_tx_btf() - Handle byte transfer finished interrupt + * in case of write + * @i2c_dev: Controller's private data + */ +static void stm32f4_i2c_handle_tx_btf(struct stm32f4_i2c_dev *i2c_dev) +{ + struct stm32f4_i2c_client *c = &i2c_dev->client; + + if (c->count) + stm32f4_i2c_write_msg(i2c_dev); + else + stm32f4_i2c_terminate_xfer(i2c_dev); +} + +/** + * stm32f4_i2c_handle_read() - Handle FIFO enmpty interrupt in case of read + * @i2c_dev: Controller's private data + */ +static void stm32f4_i2c_handle_read(struct stm32f4_i2c_dev *i2c_dev) +{ + struct stm32f4_i2c_client *c = &i2c_dev->client; + void __iomem *reg = i2c_dev->base + STM32F4_I2C_CR2; + + switch (c->count) { + case 1: + stm32f4_i2c_clr_bits(reg, STM32F4_I2C_CR2_IRQ_MASK); + stm32f4_i2c_read_msg(i2c_dev); + complete(&i2c_dev->complete); + break; + case 2: + case 3: + stm32f4_i2c_clr_bits(reg, STM32F4_I2C_CR2_ITBUFEN); + break; + default: + stm32f4_i2c_read_msg(i2c_dev); + } +} + +/** + * stm32f4_i2c_handle_rx_btf() - Handle byte transfer finished interrupt + * in case of read + * @i2c_dev: Controller's private data + */ +static void stm32f4_i2c_handle_rx_btf(struct stm32f4_i2c_dev *i2c_dev) +{ + struct stm32f4_i2c_client *c = &i2c_dev->client; + void __iomem *reg; + u32 mask; + int i; + + switch (c->count) { + case 2: + reg = i2c_dev->base + STM32F4_I2C_CR1; + /* Generate STOP or REPSTART */ + if (c->stop) + stm32f4_i2c_set_bits(reg, STM32F4_I2C_CR1_STOP); + else + stm32f4_i2c_set_bits(reg, STM32F4_I2C_CR1_START); + + /* Read two last data bytes */ + for (i = 2; i > 0; i--) + stm32f4_i2c_read_msg(i2c_dev); + + /* Disable EVT and ERR interrupt */ + reg = i2c_dev->base + STM32F4_I2C_CR2; + mask = STM32F4_I2C_CR2_ITEVTEN | STM32F4_I2C_CR2_ITERREN; + stm32f4_i2c_clr_bits(reg, mask); + + complete(&i2c_dev->complete); + break; + case 3: + /* Enable ACK and read data */ + reg = i2c_dev->base + STM32F4_I2C_CR1; + stm32f4_i2c_clr_bits(reg, STM32F4_I2C_CR1_ACK); + stm32f4_i2c_read_msg(i2c_dev); + break; + default: + stm32f4_i2c_read_msg(i2c_dev); + } +} + +/** + * stm32f4_i2c_handle_rx_addr() - Handle address matched interrupt in case of + * master receiver + * @i2c_dev: Controller's private data + */ +static void stm32f4_i2c_handle_rx_addr(struct stm32f4_i2c_dev *i2c_dev) +{ + struct stm32f4_i2c_client *c = &i2c_dev->client; + void __iomem *reg; + u32 sr2; + + switch (c->count) { + case 0: + stm32f4_i2c_terminate_xfer(i2c_dev); + /* Clear ADDR flag */ + sr2 = readl_relaxed(i2c_dev->base + STM32F4_I2C_SR2); + break; + case 1: + /* + * Single byte reception: + * Enable NACK, clear ADDR flag and generate STOP or RepSTART + */ + reg = i2c_dev->base + STM32F4_I2C_CR1; + stm32f4_i2c_clr_bits(reg, STM32F4_I2C_CR1_ACK); + sr2 = readl_relaxed(i2c_dev->base + STM32F4_I2C_SR2); + if (c->stop) + stm32f4_i2c_set_bits(reg, STM32F4_I2C_CR1_STOP); + else + stm32f4_i2c_set_bits(reg, STM32F4_I2C_CR1_START); + break; + case 2: + /* + * 2-byte reception: + * Enable NACK and PEC Position Ack and clear ADDR flag + */ + reg = i2c_dev->base + STM32F4_I2C_CR1; + stm32f4_i2c_clr_bits(reg, STM32F4_I2C_CR1_ACK); + stm32f4_i2c_set_bits(reg, STM32F4_I2C_CR1_POS); + sr2 = readl_relaxed(i2c_dev->base + STM32F4_I2C_SR2); + break; + + default: + /* N-byte reception: Enable ACK and clear ADDR flag */ + reg = i2c_dev->base + STM32F4_I2C_CR1; + stm32f4_i2c_set_bits(reg, STM32F4_I2C_CR1_ACK); + sr2 = readl_relaxed(i2c_dev->base + STM32F4_I2C_SR2); + break; + } +} + +/** + * stm32f4_i2c_isr_event() - Interrupt routine for I2C bus event + * @irq: interrupt number + * @data: Controller's private data + */ +static irqreturn_t stm32f4_i2c_isr_event(int irq, void *data) +{ + struct stm32f4_i2c_dev *i2c_dev = data; + struct stm32f4_i2c_client *c = &i2c_dev->client; + void __iomem *reg; + u32 real_status, possible_status, ien, sr2; + int flag; + + ien = readl_relaxed(i2c_dev->base + STM32F4_I2C_CR2); + ien &= STM32F4_I2C_CR2_IRQ_MASK; + + /* Check possible status combinations */ + if (ien & STM32F4_I2C_CR2_ITEVTEN) { + possible_status = STM32F4_I2C_SR1_ITEVTEN_MASK; + if (ien & STM32F4_I2C_CR2_ITBUFEN) + possible_status |= STM32F4_I2C_SR1_ITBUFEN_MASK; + } + + real_status = readl_relaxed(i2c_dev->base + STM32F4_I2C_SR1); + + if (!(real_status & possible_status)) { + dev_dbg(i2c_dev->dev, + "spurious evt it (status=0x%08x, ien=0x%08x)\n", + real_status, ien); + return IRQ_NONE; + } + + /* Use __fls() to check error bits first */ + flag = __fls(real_status & possible_status); + + switch (1 << flag) { + case STM32F4_I2C_SR1_SB: + stm32f4_i2c_write_byte(i2c_dev, c->addr); + break; + + case STM32F4_I2C_SR1_ADDR: + if (c->addr & I2C_M_RD) + stm32f4_i2c_handle_rx_addr(i2c_dev); + else + sr2 = readl_relaxed(i2c_dev->base + STM32F4_I2C_SR2); + + /* Enable ITBUF interrupts */ + reg = i2c_dev->base + STM32F4_I2C_CR2; + stm32f4_i2c_set_bits(reg, STM32F4_I2C_CR2_ITBUFEN); + break; + + case STM32F4_I2C_SR1_BTF: + if (c->addr & I2C_M_RD) + stm32f4_i2c_handle_rx_btf(i2c_dev); + else + stm32f4_i2c_handle_tx_btf(i2c_dev); + break; + + case STM32F4_I2C_SR1_TXE: + stm32f4_i2c_handle_write(i2c_dev); + break; + + case STM32F4_I2C_SR1_RXNE: + stm32f4_i2c_handle_read(i2c_dev); + break; + + default: + dev_err(i2c_dev->dev, + "evt it unhandled: status=0x%08x)\n", real_status); + return IRQ_NONE; + } + + return IRQ_HANDLED; +} + +/** + * stm32f4_i2c_isr_error() - Interrupt routine for I2C bus error + * @irq: interrupt number + * @data: Controller's private data + */ +static irqreturn_t stm32f4_i2c_isr_error(int irq, void *data) +{ + struct stm32f4_i2c_dev *i2c_dev = data; + struct stm32f4_i2c_client *c = &i2c_dev->client; + void __iomem *reg; + u32 real_status, possible_status, ien; + int flag; + + ien = readl_relaxed(i2c_dev->base + STM32F4_I2C_CR2); + ien &= STM32F4_I2C_CR2_IRQ_MASK; + + /* Check possible status combinations */ + if (ien & STM32F4_I2C_CR2_ITERREN) + possible_status = STM32F4_I2C_SR1_ITERREN_MASK; + + real_status = readl_relaxed(i2c_dev->base + STM32F4_I2C_SR1); + + if (!(real_status & possible_status)) { + dev_dbg(i2c_dev->dev, + "spurious err it (status=0x%08x, ien=0x%08x)\n", + real_status, ien); + return IRQ_NONE; + } + + /* Use __fls() to check error bits first */ + flag = __fls(real_status & possible_status); + + switch (1 << flag) { + case STM32F4_I2C_SR1_BERR: + reg = i2c_dev->base + STM32F4_I2C_SR1; + stm32f4_i2c_clr_bits(reg, STM32F4_I2C_SR1_BERR); + c->result = -EIO; + break; + + case STM32F4_I2C_SR1_ARLO: + reg = i2c_dev->base + STM32F4_I2C_SR1; + stm32f4_i2c_clr_bits(reg, STM32F4_I2C_SR1_ARLO); + c->result = -EAGAIN; + break; + + case STM32F4_I2C_SR1_AF: + reg = i2c_dev->base + STM32F4_I2C_CR1; + stm32f4_i2c_set_bits(reg, STM32F4_I2C_CR1_STOP); + c->result = -EIO; + break; + + default: + dev_err(i2c_dev->dev, + "err it unhandled: status=0x%08x)\n", real_status); + return IRQ_NONE; + } + + /* Reset I2C */ + stm32f4_i2c_soft_reset(i2c_dev); + + /* Disable interrupts */ + reg = i2c_dev->base + STM32F4_I2C_CR2; + stm32f4_i2c_clr_bits(reg, STM32F4_I2C_CR2_IRQ_MASK); + + complete(&i2c_dev->complete); + + return IRQ_HANDLED; +} + +/** + * stm32f4_i2c_xfer_msg() - Transfer a single I2C message + * @i2c_dev: Controller's private data + * @msg: I2C message to transfer + * @is_first: first message of the sequence + * @is_last: last message of the sequence + */ +static int stm32f4_i2c_xfer_msg(struct stm32f4_i2c_dev *i2c_dev, + struct i2c_msg *msg, bool is_first, + bool is_last) +{ + struct stm32f4_i2c_client *c = &i2c_dev->client; + void __iomem *reg = i2c_dev->base + STM32F4_I2C_CR1; + unsigned long timeout; + u32 mask; + int ret; + + c->addr = (u8)(msg->addr << 1); + c->addr |= (msg->flags & I2C_M_RD); + c->buf = msg->buf; + c->count = msg->len; + c->result = 0; + c->stop = is_last; + + reinit_completion(&i2c_dev->complete); + + /* Enable ITEVT and ITERR interrupts */ + mask = STM32F4_I2C_CR2_ITEVTEN | STM32F4_I2C_CR2_ITERREN; + stm32f4_i2c_set_bits(i2c_dev->base + STM32F4_I2C_CR2, mask); + + if (is_first) { + ret = stm32f4_i2c_wait_free_bus(i2c_dev); + if (ret) + return ret; + + /* START generation */ + stm32f4_i2c_set_bits(reg, STM32F4_I2C_CR1_START); + } + + timeout = wait_for_completion_timeout(&i2c_dev->complete, + i2c_dev->adap.timeout); + ret = c->result; + + /* Disable PEC position Ack */ + stm32f4_i2c_clr_bits(reg, STM32F4_I2C_CR1_POS); + + if (!timeout) { + dev_err(i2c_dev->dev, "Access to slave 0x%x timed out\n", + c->addr >> 1); + ret = -ETIMEDOUT; + } + + return ret; +} + +/** + * stm32f4_i2c_xfer() - Transfer combined I2C message + * @i2c_adap: Adapter pointer to the controller + * @msgs: Pointer to data to be written. + * @num: Number of messages to be executed + */ +static int stm32f4_i2c_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg msgs[], + int num) +{ + struct stm32f4_i2c_dev *i2c_dev = i2c_get_adapdata(i2c_adap); + int ret, i; + + i2c_dev->busy = true; + + ret = clk_prepare_enable(i2c_dev->clk); + if (ret) { + dev_err(i2c_dev->dev, "Failed to prepare_enable clock\n"); + return ret; + } + + stm32f4_i2c_hw_config(i2c_dev); + + for (i = 0; i < num && !ret; i++) + ret = stm32f4_i2c_xfer_msg(i2c_dev, &msgs[i], i == 0, + i == num - 1); + + clk_disable_unprepare(i2c_dev->clk); + + i2c_dev->busy = false; + + return (ret < 0) ? ret : i; +} + +static u32 stm32f4_i2c_func(struct i2c_adapter *adap) +{ + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; +} + +static struct i2c_algorithm stm32f4_i2c_algo = { + .master_xfer = stm32f4_i2c_xfer, + .functionality = stm32f4_i2c_func, +}; + +static int stm32f4_i2c_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct stm32f4_i2c_dev *i2c_dev; + struct resource *res; + u32 clk_rate; + struct i2c_adapter *adap; + int ret; + + i2c_dev = devm_kzalloc(&pdev->dev, sizeof(*i2c_dev), GFP_KERNEL); + if (!i2c_dev) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + i2c_dev->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(i2c_dev->base)) + return PTR_ERR(i2c_dev->base); + + i2c_dev->irq_event = irq_of_parse_and_map(np, 0); + if (!i2c_dev->irq_event) { + dev_err(&pdev->dev, "IRQ missing or invalid\n"); + return -EINVAL; + } + + i2c_dev->irq_error = irq_of_parse_and_map(np, 1); + if (!i2c_dev->irq_error) { + dev_err(&pdev->dev, "IRQ missing or invalid\n"); + return -EINVAL; + } + + i2c_dev->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(i2c_dev->clk)) { + dev_err(&pdev->dev, "Error: Missing controller clock\n"); + return PTR_ERR(i2c_dev->clk); + } + + i2c_dev->rst = devm_reset_control_get(&pdev->dev, NULL); + if (IS_ERR(i2c_dev->rst)) { + dev_err(&pdev->dev, "Error: Missing controller reset\n"); + return PTR_ERR(i2c_dev->rst); + } + + reset_control_assert(i2c_dev->rst); + udelay(2); + reset_control_deassert(i2c_dev->rst); + + i2c_dev->speed = STM32F4_I2C_SPEED_STANDARD; + ret = of_property_read_u32(np, "clock-frequency", &clk_rate); + if ((!ret) && (clk_rate == 400000)) + i2c_dev->speed = STM32F4_I2C_SPEED_FAST; + + i2c_dev->dev = &pdev->dev; + + ret = devm_request_threaded_irq(&pdev->dev, i2c_dev->irq_event, + NULL, stm32f4_i2c_isr_event, + IRQF_ONESHOT, pdev->name, i2c_dev); + if (ret) { + dev_err(&pdev->dev, "Failed to request irq %i\n", + i2c_dev->irq_error); + return ret; + } + + ret = devm_request_threaded_irq(&pdev->dev, i2c_dev->irq_error, + NULL, stm32f4_i2c_isr_error, + IRQF_ONESHOT, pdev->name, i2c_dev); + if (ret) { + dev_err(&pdev->dev, "Failed to request irq %i\n", + i2c_dev->irq_error); + return ret; + } + + adap = &i2c_dev->adap; + i2c_set_adapdata(adap, i2c_dev); + snprintf(adap->name, sizeof(adap->name), "STM32 I2C(%pa)", &res->start); + adap->owner = THIS_MODULE; + adap->timeout = 2 * HZ; + adap->retries = 0; + adap->algo = &stm32f4_i2c_algo; + adap->dev.parent = &pdev->dev; + adap->dev.of_node = pdev->dev.of_node; + + init_completion(&i2c_dev->complete); + + ret = i2c_add_adapter(adap); + if (ret) { + dev_err(&pdev->dev, "Failed to add adapter\n"); + return ret; + } + + platform_set_drvdata(pdev, i2c_dev); + + dev_info(i2c_dev->dev, "STM32F4 I2C driver initialized\n"); + + return 0; +} + +static int stm32f4_i2c_remove(struct platform_device *pdev) +{ + struct stm32f4_i2c_dev *i2c_dev = platform_get_drvdata(pdev); + + i2c_del_adapter(&i2c_dev->adap); + + return 0; +} + +static const struct of_device_id stm32f4_i2c_match[] = { + { .compatible = "st,i2c-stm32f4", }, + {}, +}; +MODULE_DEVICE_TABLE(of, stm32f4_i2c_match); + +static struct platform_driver stm32f4_i2c_driver = { + .driver = { + .name = "i2c-stm32f4", + .of_match_table = stm32f4_i2c_match, + }, + .probe = stm32f4_i2c_probe, + .remove = stm32f4_i2c_remove, +}; + +module_platform_driver(stm32f4_i2c_driver); + +MODULE_AUTHOR("M'boumba Cedric Madianga "); +MODULE_DESCRIPTION("STMicroelectronics STM32F4 I2C driver"); +MODULE_LICENSE("GPL v2"); -- 1.9.1