All of lore.kernel.org
 help / color / mirror / Atom feed
From: Binbin Zhou <zhoubb@lemote.com>
To: Ralf Baechle <ralf@linux-mips.org>
Cc: John Crispin <john@phrozen.org>,
	"Steven J. Hill" <Steven.Hill@imgtec.com>,
	linux-mips@linux-mips.org, Fuxin Zhang <zhangfx@lemote.com>,
	Zhangjin Wu <wuzhangjin@gmail.com>,
	Kelvin Cheung <keguang.zhang@gmail.com>,
	Binbin Zhou <zhoubb@lemote.com>, Chunbo Cui <cuichboo@163.com>,
	Huacai Chen <chenhc@lemote.com>
Subject: [PATCH RESEND v4 0/9] MIPS: Loongson: Add the Loongson-1A processor support
Date: Thu, 19 May 2016 09:38:25 +0800	[thread overview]
Message-ID: <1463621912-9883-1-git-send-email-zhoubb@lemote.com> (raw)

The Loongson 1A is similar with Loongson 1B, which is a 32-bit SoC.
It implements the MIPS32 release 2 instruction set.

They share the same PRID, so we rewrite the PRID_REV_LOONGSON1B to
PRID_REV_LOONGSON1A_1B, and use their CPU macros to distinguish.

However, the pll register of Loongson-1A is write-only, so the cpu clk 
should be set manually with the command line.

The format of command is cpu_clk=osc_clk,cpu_mul
the osc_clk standby cpu clock and the cpu_mul repect the clock multiplier.

For example, we use the command cpu_clk=33333333,8

Changes since v1:

- According commit c908656a7531771ae7642990a7c5f3c7307bd612
  (MIPS: Loongson: Naming style cleanup and rework) to fix the naming style.

Changes since v2:

- Remove__irq_set_handler_locked()
- Rebases on top of v4.5-rc5.

Changes since v3:
- Move ls1x CPU irq setting to driver/irqchip
- Rebases on top of v4.6-rc7.

Binbin Zhou(9):
 MIPS: Loongson: Add basic Loongson-1A CPU support
 MIPS: Loongson: Add Loongson-1A Kconfig options
 MIPS: Loongson: Add platform devices for Loongson-1A/1B
 MIPS: Loongson: Add loongson-1A board support
 MIPS: Loongson-1A: workaround of pll register's write-only property
 MIPS: irqchip/ls1x-cpu: Move the CPU IRQ driver from arch/mips/loongson32/common/
 MIPS: Loongson-1A: Enable SPARSEMEN and HIGHMEM
 MIPS: Loongson-1B: Update config file
 MIPS: Loongson: Add a Loongson-1A default config file

Signed-off-by: Chunbo Cui <cuichboo@163.com>
Signed-off-by: Binbin Zhou <zhoubb@lemote.com>
Signed-off-by: Huacai Chen <chenhc@lemote.com>
-- 
 arch/mips/Kconfig                                 |  11 ++++++
 arch/mips/configs/loongson1a_defconfig            | 131 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/mips/configs/loongson1b_defconfig            |   1 +
 arch/mips/include/asm/cpu-type.h                  |   3 +-
 arch/mips/include/asm/cpu.h                       |   2 +-
 arch/mips/include/asm/irq_cpu.h                   |   1 +
 arch/mips/include/asm/mach-loongson32/dma.h       |   1 +
 arch/mips/include/asm/mach-loongson32/irq.h       |   1 +
 arch/mips/include/asm/mach-loongson32/loongson1.h | 183 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++----------------
 arch/mips/include/asm/mach-loongson32/nand.h      |   1 +
 arch/mips/include/asm/mach-loongson32/platform.h  |  14 ++++++++
 arch/mips/include/asm/mach-loongson32/regs-mux.h  |   2 +-
 arch/mips/include/asm/sparsemem.h                 |   6 +++-
 arch/mips/kernel/cpu-probe.c                      |   6 +++-
 arch/mips/loongson32/Kconfig                      |  17 +++++++++
 arch/mips/loongson32/Makefile                     |   6 ++++
 arch/mips/loongson32/Platform                     |   1 +
 arch/mips/loongson32/common/irq.c                 | 128 +------------------------------------------------------------------
 arch/mips/loongson32/common/platform.c            | 256 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-------
 arch/mips/loongson32/common/prom.c                |   6 ++++
 arch/mips/loongson32/common/reset.c               |   6 ++++
 arch/mips/loongson32/common/setup.c               |  49 +++++++++++++++++++++++++-
 arch/mips/loongson32/ls1a/Makefile                |   5 +++
 arch/mips/loongson32/ls1a/board.c                 | 122 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/mips/mm/c-r4k.c                              |   9 +++++
 drivers/clk/clk-ls1x.c                            |  22 +++++++++---
 drivers/irqchip/Makefile                          |   1 +
 drivers/irqchip/irq-ls1x-cpu.c                    | 242 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 28 files changed, 1054 insertions(+), 179 deletions(-)
 create mode 100644 arch/mips/configs/loongson1a_defconfig
 create mode 100644 arch/mips/loongson32/ls1a/Makefile
 create mode 100644 arch/mips/loongson32/ls1a/board.c
 create mode 100644 drivers/irqchip/irq-ls1x-cpu.c
--
1.9.0

             reply	other threads:[~2016-05-19  1:43 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-05-19  1:38 Binbin Zhou [this message]
2016-05-19  1:38 ` [PATCH RESEND v4 1/9] MIPS: Loongson: Add basic Loongson-1A CPU support Binbin Zhou
2016-08-02  8:32   ` Ralf Baechle
2016-05-19  1:38 ` [PATCH RESEND v4 2/9] MIPS: Loongson: Add Loongson-1A Kconfig options Binbin Zhou
2016-05-19  1:38 ` [PATCH RESEND v4 3/9] MIPS: Loongson: Add platform devices for Loongson-1A/1B Binbin Zhou
2016-05-19  1:38 ` [PATCH RESEND v4 4/9] MIPS: Loongson: Add loongson-1A board support Binbin Zhou
2016-05-19  1:38 ` [PATCH RESEND v4 7/9] MIPS: Loongson-1A: Enable SPARSEMEN and HIGHMEM Binbin Zhou
2016-08-02  8:29   ` Ralf Baechle
2016-08-02  9:47     ` James Hogan
2016-08-02  9:47       ` James Hogan
2016-05-19  1:38 ` [PATCH RESEND v4 8/9] MIPS: Loongson-1B: Update config file Binbin Zhou
2016-05-19  1:38 ` [PATCH RESEND v4 9/9] MIPS: Loongson: Add a Loongson-1A default " Binbin Zhou

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1463621912-9883-1-git-send-email-zhoubb@lemote.com \
    --to=zhoubb@lemote.com \
    --cc=Steven.Hill@imgtec.com \
    --cc=chenhc@lemote.com \
    --cc=cuichboo@163.com \
    --cc=john@phrozen.org \
    --cc=keguang.zhang@gmail.com \
    --cc=linux-mips@linux-mips.org \
    --cc=ralf@linux-mips.org \
    --cc=wuzhangjin@gmail.com \
    --cc=zhangfx@lemote.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.