All of lore.kernel.org
 help / color / mirror / Atom feed
From: Kevin Wolf <kwolf@redhat.com>
To: qemu-block@nongnu.org
Cc: kwolf@redhat.com, qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 18/31] blockjob: Don't touch BDS iostatus
Date: Thu, 19 May 2016 17:21:56 +0200	[thread overview]
Message-ID: <1463671329-22655-19-git-send-email-kwolf@redhat.com> (raw)
In-Reply-To: <1463671329-22655-1-git-send-email-kwolf@redhat.com>

Block jobs don't actually make use of the iostatus for their BDSes, but
they manage a separate block job iostatus. Still, they require that it
is enabled for the source BDS and they enable it automatically for the
target and set the error handling mode - which ends up never being used
by the job.

This patch removes all of the BDS iostatus handling from the block job,
which removes another few bs->blk accesses.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
---
 block/backup.c | 26 --------------------------
 block/commit.c |  7 -------
 block/mirror.c | 26 --------------------------
 block/stream.c |  7 -------
 4 files changed, 66 deletions(-)

diff --git a/block/backup.c b/block/backup.c
index ef7609d..fec45e8 100644
--- a/block/backup.c
+++ b/block/backup.c
@@ -218,15 +218,6 @@ static void backup_set_speed(BlockJob *job, int64_t speed, Error **errp)
     ratelimit_set_speed(&s->limit, speed / BDRV_SECTOR_SIZE, SLICE_TIME);
 }
 
-static void backup_iostatus_reset(BlockJob *job)
-{
-    BackupBlockJob *s = container_of(job, BackupBlockJob, common);
-
-    if (s->target->blk) {
-        blk_iostatus_reset(s->target->blk);
-    }
-}
-
 static void backup_cleanup_sync_bitmap(BackupBlockJob *job, int ret)
 {
     BdrvDirtyBitmap *bm;
@@ -263,7 +254,6 @@ static const BlockJobDriver backup_job_driver = {
     .instance_size  = sizeof(BackupBlockJob),
     .job_type       = BLOCK_JOB_TYPE_BACKUP,
     .set_speed      = backup_set_speed,
-    .iostatus_reset = backup_iostatus_reset,
     .commit         = backup_commit,
     .abort          = backup_abort,
 };
@@ -388,7 +378,6 @@ static void coroutine_fn backup_run(void *opaque)
     BackupCompleteData *data;
     BlockDriverState *bs = job->common.bs;
     BlockDriverState *target = job->target;
-    BlockdevOnError on_target_error = job->on_target_error;
     NotifierWithReturn before_write = {
         .notify = backup_before_write_notify,
     };
@@ -404,11 +393,6 @@ static void coroutine_fn backup_run(void *opaque)
 
     job->done_bitmap = bitmap_new(end);
 
-    if (target->blk) {
-        blk_set_on_error(target->blk, on_target_error, on_target_error);
-        blk_iostatus_enable(target->blk);
-    }
-
     bdrv_add_before_write_notifier(bs, &before_write);
 
     if (job->sync_mode == MIRROR_SYNC_MODE_NONE) {
@@ -484,9 +468,6 @@ static void coroutine_fn backup_run(void *opaque)
     qemu_co_rwlock_unlock(&job->flush_rwlock);
     g_free(job->done_bitmap);
 
-    if (target->blk) {
-        blk_iostatus_disable(target->blk);
-    }
     bdrv_op_unblock_all(target, job->common.blocker);
 
     data = g_malloc(sizeof(*data));
@@ -515,13 +496,6 @@ void backup_start(BlockDriverState *bs, BlockDriverState *target,
         return;
     }
 
-    if ((on_source_error == BLOCKDEV_ON_ERROR_STOP ||
-         on_source_error == BLOCKDEV_ON_ERROR_ENOSPC) &&
-        (!bs->blk || !blk_iostatus_is_enabled(bs->blk))) {
-        error_setg(errp, QERR_INVALID_PARAMETER, "on-source-error");
-        return;
-    }
-
     if (!bdrv_is_inserted(bs)) {
         error_setg(errp, "Device is not inserted: %s",
                    bdrv_get_device_name(bs));
diff --git a/block/commit.c b/block/commit.c
index cba0e8c..f308c8c 100644
--- a/block/commit.c
+++ b/block/commit.c
@@ -214,13 +214,6 @@ void commit_start(BlockDriverState *bs, BlockDriverState *base,
     BlockDriverState *overlay_bs;
     Error *local_err = NULL;
 
-    if ((on_error == BLOCKDEV_ON_ERROR_STOP ||
-         on_error == BLOCKDEV_ON_ERROR_ENOSPC) &&
-        (!bs->blk || !blk_iostatus_is_enabled(bs->blk))) {
-        error_setg(errp, "Invalid parameter combination");
-        return;
-    }
-
     assert(top != bs);
     if (top == base) {
         error_setg(errp, "Invalid files for merge: top and base are the same");
diff --git a/block/mirror.c b/block/mirror.c
index c7f51ad..71d7a4e 100644
--- a/block/mirror.c
+++ b/block/mirror.c
@@ -710,9 +710,6 @@ immediate_exit:
     g_free(s->cow_bitmap);
     g_free(s->in_flight_bitmap);
     bdrv_release_dirty_bitmap(bs, s->dirty_bitmap);
-    if (s->target->blk) {
-        blk_iostatus_disable(s->target->blk);
-    }
 
     data = g_malloc(sizeof(*data));
     data->ret = ret;
@@ -739,15 +736,6 @@ static void mirror_set_speed(BlockJob *job, int64_t speed, Error **errp)
     ratelimit_set_speed(&s->limit, speed / BDRV_SECTOR_SIZE, SLICE_TIME);
 }
 
-static void mirror_iostatus_reset(BlockJob *job)
-{
-    MirrorBlockJob *s = container_of(job, MirrorBlockJob, common);
-
-    if (s->target->blk) {
-        blk_iostatus_reset(s->target->blk);
-    }
-}
-
 static void mirror_complete(BlockJob *job, Error **errp)
 {
     MirrorBlockJob *s = container_of(job, MirrorBlockJob, common);
@@ -793,7 +781,6 @@ static const BlockJobDriver mirror_job_driver = {
     .instance_size = sizeof(MirrorBlockJob),
     .job_type      = BLOCK_JOB_TYPE_MIRROR,
     .set_speed     = mirror_set_speed,
-    .iostatus_reset= mirror_iostatus_reset,
     .complete      = mirror_complete,
 };
 
@@ -801,8 +788,6 @@ static const BlockJobDriver commit_active_job_driver = {
     .instance_size = sizeof(MirrorBlockJob),
     .job_type      = BLOCK_JOB_TYPE_COMMIT,
     .set_speed     = mirror_set_speed,
-    .iostatus_reset
-                   = mirror_iostatus_reset,
     .complete      = mirror_complete,
 };
 
@@ -827,13 +812,6 @@ static void mirror_start_job(BlockDriverState *bs, BlockDriverState *target,
 
     assert ((granularity & (granularity - 1)) == 0);
 
-    if ((on_source_error == BLOCKDEV_ON_ERROR_STOP ||
-         on_source_error == BLOCKDEV_ON_ERROR_ENOSPC) &&
-        (!bs->blk || !blk_iostatus_is_enabled(bs->blk))) {
-        error_setg(errp, QERR_INVALID_PARAMETER, "on-source-error");
-        return;
-    }
-
     if (buf_size < 0) {
         error_setg(errp, "Invalid parameter 'buf-size'");
         return;
@@ -882,10 +860,6 @@ static void mirror_start_job(BlockDriverState *bs, BlockDriverState *target,
 
     bdrv_op_block_all(s->target, s->common.blocker);
 
-    if (s->target->blk) {
-        blk_set_on_error(s->target->blk, on_target_error, on_target_error);
-        blk_iostatus_enable(s->target->blk);
-    }
     s->common.co = qemu_coroutine_create(mirror_run);
     trace_mirror_start(bs, s, s->common.co, opaque);
     qemu_coroutine_enter(s->common.co, s);
diff --git a/block/stream.c b/block/stream.c
index 16c3e90..40aa322 100644
--- a/block/stream.c
+++ b/block/stream.c
@@ -223,13 +223,6 @@ void stream_start(BlockDriverState *bs, BlockDriverState *base,
 {
     StreamBlockJob *s;
 
-    if ((on_error == BLOCKDEV_ON_ERROR_STOP ||
-         on_error == BLOCKDEV_ON_ERROR_ENOSPC) &&
-        (!bs->blk || !blk_iostatus_is_enabled(bs->blk))) {
-        error_setg(errp, QERR_INVALID_PARAMETER, "on-error");
-        return;
-    }
-
     s = block_job_create(&stream_job_driver, bs, speed, cb, opaque, errp);
     if (!s) {
         return;
-- 
1.8.3.1

  parent reply	other threads:[~2016-05-19 15:22 UTC|newest]

Thread overview: 39+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-05-19 15:21 [Qemu-devel] [PULL 00/31] Block layer patches Kevin Wolf
2016-05-19 15:21 ` [Qemu-devel] [PULL 01/31] block: Make sure throttled BDSes always have a BB Kevin Wolf
2016-05-19 15:21 ` [Qemu-devel] [PULL 02/31] block: Introduce BlockBackendPublic Kevin Wolf
2016-05-19 15:21 ` [Qemu-devel] [PULL 03/31] block: throttle-groups: Use BlockBackend pointers internally Kevin Wolf
2016-05-19 15:21 ` [Qemu-devel] [PULL 04/31] block: Convert throttle_group_get_name() to BlockBackend Kevin Wolf
2016-05-19 15:21 ` [Qemu-devel] [PULL 05/31] block: Move throttling fields from BDS to BB Kevin Wolf
2016-05-19 15:21 ` [Qemu-devel] [PULL 06/31] block: Move actual I/O throttling to BlockBackend Kevin Wolf
2016-05-19 15:21 ` [Qemu-devel] [PULL 07/31] block: Move I/O throttling configuration functions " Kevin Wolf
2016-05-19 15:21 ` [Qemu-devel] [PULL 08/31] block: Introduce BdrvChild.opaque Kevin Wolf
2016-05-19 15:21 ` [Qemu-devel] [PULL 09/31] block: Drain throttling queue with BdrvChild callback Kevin Wolf
2016-05-19 15:21 ` [Qemu-devel] [PULL 10/31] block/io: Quiesce parents between drained_begin/end Kevin Wolf
2016-05-19 15:21 ` [Qemu-devel] [PULL 11/31] block: Decouple throttling from BlockDriverState Kevin Wolf
2016-05-19 15:21 ` [Qemu-devel] [PULL 12/31] block: Remove bdrv_move_feature_fields() Kevin Wolf
2016-05-19 15:21 ` [Qemu-devel] [PULL 13/31] Revert "block: Forbid I/O throttling on nodes with multiple parents for 2.6" Kevin Wolf
2016-05-19 15:21 ` [Qemu-devel] [PULL 14/31] block: Don't check throttled reqs in bdrv_requests_pending() Kevin Wolf
2016-05-19 15:21 ` [Qemu-devel] [PULL 15/31] block: Use BdrvChild callbacks for change_media/resize Kevin Wolf
2016-05-19 15:21 ` [Qemu-devel] [PULL 16/31] block: User BdrvChild callback for device name Kevin Wolf
2016-05-19 15:21 ` [Qemu-devel] [PULL 17/31] blockjob: Don't set iostatus of target Kevin Wolf
2016-05-19 15:21 ` Kevin Wolf [this message]
2016-05-19 15:21 ` [Qemu-devel] [PULL 19/31] block: Remove bdrv_aio_multiwrite() Kevin Wolf
2016-05-19 15:21 ` [Qemu-devel] [PULL 20/31] block: Add bdrv_has_blk() Kevin Wolf
2016-05-19 15:21 ` [Qemu-devel] [PULL 21/31] block: Avoid bs->blk in bdrv_next() Kevin Wolf
2016-05-20  7:54   ` Paolo Bonzini
2016-05-20  8:05     ` Kevin Wolf
2016-05-20  8:10       ` Kevin Wolf
2016-05-20  9:39         ` Paolo Bonzini
2016-05-20 10:26           ` Kevin Wolf
2016-05-20 10:46             ` Paolo Bonzini
2016-05-19 15:22 ` [Qemu-devel] [PULL 22/31] block: Don't return throttling info in query-named-block-nodes Kevin Wolf
2016-05-19 15:22 ` [Qemu-devel] [PULL 23/31] block: Remove BlockDriverState.blk Kevin Wolf
2016-05-19 15:22 ` [Qemu-devel] [PULL 24/31] block: Propagate AioContext change to all children Kevin Wolf
2016-05-19 15:22 ` [Qemu-devel] [PULL 25/31] qcow2: fix condition in is_zero_cluster Kevin Wolf
2016-05-19 15:22 ` [Qemu-devel] [PULL 26/31] qcow2: Fix write_zeroes with partially allocated backing file cluster Kevin Wolf
2016-05-19 15:22 ` [Qemu-devel] [PULL 27/31] qemu-iotests: Some more write_zeroes tests Kevin Wolf
2016-05-19 15:22 ` [Qemu-devel] [PULL 28/31] block: clarify error message for qmp-eject Kevin Wolf
2016-05-19 15:22 ` [Qemu-devel] [PULL 29/31] qemu-io: Fix recent UI updates Kevin Wolf
2016-05-19 15:22 ` [Qemu-devel] [PULL 30/31] qemu-iotests: Simplify 109 with unaligned qemu-img compare Kevin Wolf
2016-05-19 15:22 ` [Qemu-devel] [PULL 31/31] qemu-iotests: Fix regression in 136 on aio_read invalid Kevin Wolf
2016-05-19 16:40 ` [Qemu-devel] [PULL 00/31] Block layer patches Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1463671329-22655-19-git-send-email-kwolf@redhat.com \
    --to=kwolf@redhat.com \
    --cc=qemu-block@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.