From mboxrd@z Thu Jan 1 00:00:00 1970 From: Chen-Yu Tsai Date: Mon, 23 May 2016 20:41:37 +0800 Subject: [U-Boot] [PATCH 01/10] ARM: PSCI: use only r0 and r3 in psci_get_cpu_stack_top() In-Reply-To: <1464007306-30269-1-git-send-email-wens@csie.org> References: <1464007306-30269-1-git-send-email-wens@csie.org> Message-ID: <1464007306-30269-2-git-send-email-wens@csie.org> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de For psci_get_cpu_stack_top() to be usable in C code, it must adhere to the ARM calling conventions. Since it could be called when the stack is still unavailable, and the entry code to linux also expects r1 and r2 to remain unchanged, stick to r0 and r3. Signed-off-by: Chen-Yu Tsai --- arch/arm/cpu/armv7/psci.S | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/arch/arm/cpu/armv7/psci.S b/arch/arm/cpu/armv7/psci.S index 87c0c0b6f5eb..cdd001fe3fb0 100644 --- a/arch/arm/cpu/armv7/psci.S +++ b/arch/arm/cpu/armv7/psci.S @@ -196,15 +196,15 @@ ENDPROC(psci_cpu_off_common) @ expects CPU ID in r0 and returns stack top in r0 ENTRY(psci_get_cpu_stack_top) - mov r5, #0x400 @ 1kB of stack per CPU - mul r0, r0, r5 - - ldr r5, =psci_text_end @ end of monitor text - add r5, r5, #0x2000 @ Skip two pages - lsr r5, r5, #12 @ Align to start of page - lsl r5, r5, #12 - sub r5, r5, #4 @ reserve 1 word for target PC - sub r0, r5, r0 @ here's our stack! + mov r3, #0x400 @ 1kB of stack per CPU + mul r0, r0, r3 + + ldr r3, =psci_text_end @ end of monitor text + add r3, r3, #0x2000 @ Skip two pages + lsr r3, r3, #12 @ Align to start of page + lsl r3, r3, #12 + sub r3, r3, #4 @ reserve 1 word for target PC + sub r0, r3, r0 @ here's our stack! bx lr ENDPROC(psci_get_cpu_stack_top) -- 2.8.1