All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jakub Kicinski <jakub.kicinski@netronome.com>
To: netdev@vger.kernel.org
Cc: ast@kernel.org, daniel@iogearbox.net,
	dinan.gunawardena@netronome.com,
	Jakub Kicinski <jakub.kicinski@netronome.com>
Subject: [RFC 04/12] net: cls_bpf: add support for marking filters as hardware-only
Date: Wed,  1 Jun 2016 17:50:06 +0100	[thread overview]
Message-ID: <1464799814-4453-5-git-send-email-jakub.kicinski@netronome.com> (raw)
In-Reply-To: <1464799814-4453-1-git-send-email-jakub.kicinski@netronome.com>

Add cls_bpf support for the TCA_CLS_FLAGS_SKIP_SW flag.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dinan Gunawardena <dgunawardena@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
---
 net/sched/cls_bpf.c | 39 +++++++++++++++++++++++++++++----------
 1 file changed, 29 insertions(+), 10 deletions(-)

diff --git a/net/sched/cls_bpf.c b/net/sched/cls_bpf.c
index 9f1bc37dcbbc..1083910cebaf 100644
--- a/net/sched/cls_bpf.c
+++ b/net/sched/cls_bpf.c
@@ -28,7 +28,7 @@ MODULE_DESCRIPTION("TC BPF based classifier");
 
 #define CLS_BPF_NAME_LEN	256
 #define CLS_BPF_SUPPORTED_GEN_FLAGS		\
-	TCA_CLS_FLAGS_SKIP_HW
+	(TCA_CLS_FLAGS_SKIP_HW | TCA_CLS_FLAGS_SKIP_SW)
 
 struct cls_bpf_head {
 	struct list_head plist;
@@ -98,7 +98,9 @@ static int cls_bpf_classify(struct sk_buff *skb, const struct tcf_proto *tp,
 
 		qdisc_skb_cb(skb)->tc_classid = prog->res.classid;
 
-		if (at_ingress) {
+		if (tc_skip_sw(prog->gen_flags)) {
+			filter_res = 0;
+		} else if (at_ingress) {
 			/* It is safe to push/pull even if skb_shared() */
 			__skb_push(skb, skb->mac_len);
 			bpf_compute_data_end(skb);
@@ -166,32 +168,42 @@ static int cls_bpf_offload_cmd(struct tcf_proto *tp, struct cls_bpf_prog *prog,
 					     tp->protocol, &offload);
 }
 
-static void cls_bpf_offload(struct tcf_proto *tp, struct cls_bpf_prog *prog,
-			    struct cls_bpf_prog *oldprog)
+static int cls_bpf_offload(struct tcf_proto *tp, struct cls_bpf_prog *prog,
+			   struct cls_bpf_prog *oldprog)
 {
 	struct net_device *dev = tp->q->dev_queue->dev;
 	struct cls_bpf_prog *obj = prog;
 	enum tc_clsbpf_command cmd;
+	bool skip_sw;
+	int ret;
+
+	skip_sw = tc_skip_sw(prog->gen_flags) ||
+		(oldprog && tc_skip_sw(oldprog->gen_flags));
 
 	if (oldprog && oldprog->offloaded) {
 		if (tc_should_offload(dev, prog->gen_flags)) {
 			cmd = TC_CLSBPF_REPLACE;
-		} else {
+		} else if (!tc_skip_sw(prog->gen_flags)) {
 			obj = oldprog;
 			cmd = TC_CLSBPF_DESTROY;
+		} else {
+			return -EINVAL;
 		}
 	} else {
 		if (!tc_should_offload(dev, prog->gen_flags))
-			return;
+			return skip_sw ? -EINVAL : 0;;
 		cmd = TC_CLSBPF_ADD;
 	}
 
-	if (cls_bpf_offload_cmd(tp, obj, cmd))
-		return;
+	ret = cls_bpf_offload_cmd(tp, obj, cmd);
+	if (ret)
+		return skip_sw ? ret : 0;
 
 	obj->offloaded = true;
 	if (oldprog)
 		oldprog->offloaded = false;
+
+	return 0;
 }
 
 static void cls_bpf_stop_offload(struct tcf_proto *tp,
@@ -406,8 +418,11 @@ static int cls_bpf_modify_existing(struct net *net, struct tcf_proto *tp,
 
 		have_exts = bpf_flags & TCA_BPF_FLAG_ACT_DIRECT;
 	}
-	if (tb[TCA_BPF_GEN_TCA_FLAGS])
+	if (tb[TCA_BPF_GEN_TCA_FLAGS]) {
 		gen_flags = nla_get_u32(tb[TCA_BPF_GEN_TCA_FLAGS]);
+		if (!tc_flags_valid(gen_flags))
+			return -EINVAL;
+	}
 
 	prog->exts_integrated = have_exts;
 	prog->gen_flags = gen_flags & CLS_BPF_SUPPORTED_GEN_FLAGS;
@@ -493,7 +508,11 @@ static int cls_bpf_change(struct net *net, struct sk_buff *in_skb,
 	if (ret < 0)
 		goto errout;
 
-	cls_bpf_offload(tp, prog, oldprog);
+	ret = cls_bpf_offload(tp, prog, oldprog);
+	if (ret) {
+		cls_bpf_delete_prog(tp, prog);
+		return ret;
+	}
 
 	if (oldprog) {
 		list_replace_rcu(&oldprog->link, &prog->link);
-- 
1.9.1

  parent reply	other threads:[~2016-06-01 16:51 UTC|newest]

Thread overview: 54+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-06-01 16:50 [RFC 00/12] BPF hardware offload via cls_bpf Jakub Kicinski
2016-06-01 16:50 ` [RFC 01/12] add basic register-field manipulation macros Jakub Kicinski
2016-06-01 20:15   ` Hannes Frederic Sowa
2016-06-01 23:08     ` Jakub Kicinski
2016-06-02 12:01       ` Hannes Frederic Sowa
2016-06-01 16:50 ` [RFC 02/12] net: cls_bpf: add hardware offload Jakub Kicinski
2016-06-01 17:13   ` John Fastabend
2016-06-01 20:59     ` Jakub Kicinski
2016-06-01 19:34   ` Daniel Borkmann
2016-06-02  7:17   ` Jiri Pirko
2016-06-02 12:07     ` Jakub Kicinski
2016-06-01 16:50 ` [RFC 03/12] net: cls_bpf: limit hardware offload by software-only flag Jakub Kicinski
2016-06-01 17:16   ` John Fastabend
2016-06-01 17:16   ` John Fastabend
2016-06-01 19:40   ` Daniel Borkmann
2016-06-01 21:05     ` Jakub Kicinski
2016-06-01 21:21       ` Daniel Borkmann
2016-06-01 21:26         ` Jakub Kicinski
2016-06-01 21:31           ` Daniel Borkmann
2016-06-02  7:24   ` Jiri Pirko
2016-06-01 16:50 ` Jakub Kicinski [this message]
2016-06-01 17:19   ` [RFC 04/12] net: cls_bpf: add support for marking filters as hardware-only John Fastabend
2016-06-01 19:57   ` Daniel Borkmann
2016-06-01 16:50 ` [RFC 05/12] nfp: add BPF to NFP code translator Jakub Kicinski
2016-06-01 20:03   ` Daniel Borkmann
2016-06-01 20:09     ` John Fastabend
2016-06-01 20:15     ` Alexei Starovoitov
2016-06-01 21:23       ` Jakub Kicinski
2016-06-02 16:21       ` John Fastabend
2016-06-01 16:50 ` [RFC 06/12] nfp: add hardware cls_bpf offload Jakub Kicinski
2016-06-01 20:20   ` Daniel Borkmann
2016-06-01 20:52     ` Alexei Starovoitov
2016-06-01 21:15       ` Jakub Kicinski
2016-06-01 21:51         ` Alexei Starovoitov
2016-06-01 21:16       ` Daniel Borkmann
2016-06-01 21:36       ` John Fastabend
2016-06-02  6:57         ` Jiri Pirko
2016-06-02 12:13           ` Jakub Kicinski
2016-06-02 12:30             ` Daniel Borkmann
2016-06-01 23:03   ` Daniel Borkmann
2016-06-01 16:50 ` [RFC 07/12] nfp: add skb mark support to the bpf offload Jakub Kicinski
2016-06-01 21:56   ` Alexei Starovoitov
2016-06-01 22:19     ` Jakub Kicinski
2016-06-01 22:30       ` Daniel Borkmann
2016-06-01 23:01         ` Jakub Kicinski
2016-06-01 16:50 ` [RFC 08/12] net: cls_bpf: allow offloaded filters to update stats Jakub Kicinski
2016-06-01 17:20   ` John Fastabend
2016-06-01 22:09   ` Daniel Borkmann
2016-06-01 16:50 ` [RFC 09/12] nfp: report statistics of offloaded filters Jakub Kicinski
2016-06-01 16:50 ` [RFC 10/12] nfp: bpf: optimize register init Jakub Kicinski
2016-06-01 16:50 ` [RFC 11/12] nfp: bpf: add register rename Jakub Kicinski
2016-06-01 16:50 ` [RFC 12/12] nfp: bpf: add denser mode of execution Jakub Kicinski
2016-06-01 22:01   ` Alexei Starovoitov
2016-06-01 22:47     ` Jakub Kicinski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1464799814-4453-5-git-send-email-jakub.kicinski@netronome.com \
    --to=jakub.kicinski@netronome.com \
    --cc=ast@kernel.org \
    --cc=daniel@iogearbox.net \
    --cc=dinan.gunawardena@netronome.com \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.