From mboxrd@z Thu Jan 1 00:00:00 1970 From: shc_work@mail.ru (Alexander Shiyan) Date: Sat, 4 Jun 2016 10:10:07 +0300 Subject: [PATCH 15/22] video: clps711x: Remove old driver In-Reply-To: <1465024214-22120-1-git-send-email-shc_work@mail.ru> References: <1465024214-22120-1-git-send-email-shc_work@mail.ru> Message-ID: <1465024214-22120-16-git-send-email-shc_work@mail.ru> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Since board support for the CLPS711X platform was removed, remove the old driver. Signed-off-by: Alexander Shiyan --- drivers/video/fbdev/Kconfig | 7 - drivers/video/fbdev/Makefile | 1 - drivers/video/fbdev/clps711xfb.c | 314 --------------------------------------- 3 files changed, 322 deletions(-) delete mode 100644 drivers/video/fbdev/clps711xfb.c diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig index 88b008f..e050f18 100644 --- a/drivers/video/fbdev/Kconfig +++ b/drivers/video/fbdev/Kconfig @@ -317,16 +317,9 @@ config FB_ACORN hardware found in Acorn RISC PCs and other ARM-based machines. If unsure, say N. -config FB_CLPS711X_OLD - tristate - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT - config FB_CLPS711X tristate "CLPS711X LCD support" depends on FB && (ARCH_CLPS711X || COMPILE_TEST) - select FB_CLPS711X_OLD if ARCH_CLPS711X && !ARCH_MULTIPLATFORM select BACKLIGHT_LCD_SUPPORT select FB_MODE_HELPERS select FB_SYS_FILLRECT diff --git a/drivers/video/fbdev/Makefile b/drivers/video/fbdev/Makefile index f673186..b9ec64b 100644 --- a/drivers/video/fbdev/Makefile +++ b/drivers/video/fbdev/Makefile @@ -15,7 +15,6 @@ obj-$(CONFIG_FB_WMT_GE_ROPS) += wmt_ge_rops.o obj-$(CONFIG_FB_AMIGA) += amifb.o c2p_planar.o obj-$(CONFIG_FB_ARC) += arcfb.o obj-$(CONFIG_FB_CLPS711X) += clps711x-fb.o -obj-$(CONFIG_FB_CLPS711X_OLD) += clps711xfb.o obj-$(CONFIG_FB_CYBER2000) += cyber2000fb.o obj-$(CONFIG_FB_GRVGA) += grvga.o obj-$(CONFIG_FB_PM2) += pm2fb.o diff --git a/drivers/video/fbdev/clps711xfb.c b/drivers/video/fbdev/clps711xfb.c deleted file mode 100644 index 7693aea..0000000 --- a/drivers/video/fbdev/clps711xfb.c +++ /dev/null @@ -1,314 +0,0 @@ -/* - * linux/drivers/video/clps711xfb.c - * - * Copyright (C) 2000-2001 Deep Blue Solutions Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * Framebuffer driver for the CLPS7111 and EP7212 processors. - */ -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -struct fb_info *cfb; - -#define CMAP_MAX_SIZE 16 - -/* - * LCD AC Prescale. This comes from the LCD panel manufacturers specifications. - * This determines how many clocks + 1 of CL1 before the M signal toggles. - * The number of lines on the display must not be divisible by this number. - */ -static unsigned int lcd_ac_prescale = 13; - -/* - * Set a single color register. Return != 0 for invalid regno. - */ -static int -clps7111fb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, - u_int transp, struct fb_info *info) -{ - unsigned int level, mask, shift, pal; - - if (regno >= (1 << info->var.bits_per_pixel)) - return 1; - - /* gray = 0.30*R + 0.58*G + 0.11*B */ - level = (red * 77 + green * 151 + blue * 28) >> 20; - - /* - * On an LCD, a high value is dark, while a low value is light. - * So we invert the level. - * - * This isn't true on all machines, so we only do it on EDB7211. - * --rmk - */ - if (machine_is_edb7211()) { - level = 15 - level; - } - - shift = 4 * (regno & 7); - level <<= shift; - mask = 15 << shift; - level &= mask; - - regno = regno < 8 ? PALLSW : PALMSW; - - pal = clps_readl(regno); - pal = (pal & ~mask) | level; - clps_writel(pal, regno); - - return 0; -} - -/* - * Validate the purposed mode. - */ -static int -clps7111fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) -{ - var->transp.msb_right = 0; - var->transp.offset = 0; - var->transp.length = 0; - var->red.msb_right = 0; - var->red.offset = 0; - var->red.length = var->bits_per_pixel; - var->green = var->red; - var->blue = var->red; - - if (var->bits_per_pixel > 4) - return -EINVAL; - - return 0; -} - -/* - * Set the hardware state. - */ -static int -clps7111fb_set_par(struct fb_info *info) -{ - unsigned int lcdcon, syscon, pixclock; - - switch (info->var.bits_per_pixel) { - case 1: - info->fix.visual = FB_VISUAL_MONO01; - break; - case 2: - info->fix.visual = FB_VISUAL_PSEUDOCOLOR; - break; - case 4: - info->fix.visual = FB_VISUAL_PSEUDOCOLOR; - break; - } - - info->fix.line_length = info->var.xres_virtual * info->var.bits_per_pixel / 8; - - lcdcon = (info->var.xres_virtual * info->var.yres_virtual * info->var.bits_per_pixel) / 128 - 1; - lcdcon |= ((info->var.xres_virtual / 16) - 1) << 13; - lcdcon |= lcd_ac_prescale << 25; - - /* - * Calculate pixel prescale value from the pixclock. This is: - * 36.864MHz / pixclock_mhz - 1. - * However, pixclock is in picoseconds, so this ends up being: - * 36864000 * pixclock_ps / 10^12 - 1 - * and this will overflow the 32-bit math. We perform this as - * (9 * 4096000 == 36864000): - * pixclock_ps * 9 * (4096000 / 10^12) - 1 - */ - pixclock = 9 * info->var.pixclock / 244140 - 1; - lcdcon |= pixclock << 19; - - if (info->var.bits_per_pixel == 4) - lcdcon |= LCDCON_GSMD; - if (info->var.bits_per_pixel >= 2) - lcdcon |= LCDCON_GSEN; - - /* - * LCDCON must only be changed while the LCD is disabled - */ - syscon = clps_readl(SYSCON1); - clps_writel(syscon & ~SYSCON1_LCDEN, SYSCON1); - clps_writel(lcdcon, LCDCON); - clps_writel(syscon | SYSCON1_LCDEN, SYSCON1); - return 0; -} - -static int clps7111fb_blank(int blank, struct fb_info *info) -{ - /* Enable/Disable LCD controller. */ - if (blank) - clps_writel(clps_readl(SYSCON1) & ~SYSCON1_LCDEN, SYSCON1); - else - clps_writel(clps_readl(SYSCON1) | SYSCON1_LCDEN, SYSCON1); - - return 0; -} - -static struct fb_ops clps7111fb_ops = { - .owner = THIS_MODULE, - .fb_check_var = clps7111fb_check_var, - .fb_set_par = clps7111fb_set_par, - .fb_setcolreg = clps7111fb_setcolreg, - .fb_blank = clps7111fb_blank, - .fb_fillrect = cfb_fillrect, - .fb_copyarea = cfb_copyarea, - .fb_imageblit = cfb_imageblit, -}; - -static void clps711x_guess_lcd_params(struct fb_info *info) -{ - unsigned int lcdcon, syscon, size; - unsigned long phys_base = PAGE_OFFSET; - void *virt_base = (void *)PAGE_OFFSET; - - info->var.xres_virtual = 640; - info->var.yres_virtual = 240; - info->var.bits_per_pixel = 4; - info->var.activate = FB_ACTIVATE_NOW; - info->var.height = -1; - info->var.width = -1; - info->var.pixclock = 93006; /* 10.752MHz pixel clock */ - - /* - * If the LCD controller is already running, decode the values - * in LCDCON to xres/yres/bpp/pixclock/acprescale - */ - syscon = clps_readl(SYSCON1); - if (syscon & SYSCON1_LCDEN) { - lcdcon = clps_readl(LCDCON); - - /* - * Decode GSMD and GSEN bits to bits per pixel - */ - switch (lcdcon & (LCDCON_GSMD | LCDCON_GSEN)) { - case LCDCON_GSMD | LCDCON_GSEN: - info->var.bits_per_pixel = 4; - break; - - case LCDCON_GSEN: - info->var.bits_per_pixel = 2; - break; - - default: - info->var.bits_per_pixel = 1; - break; - } - - /* - * Decode xres/yres - */ - info->var.xres_virtual = (((lcdcon >> 13) & 0x3f) + 1) * 16; - info->var.yres_virtual = (((lcdcon & 0x1fff) + 1) * 128) / - (info->var.xres_virtual * - info->var.bits_per_pixel); - - /* - * Calculate pixclock - */ - info->var.pixclock = (((lcdcon >> 19) & 0x3f) + 1) * 244140 / 9; - - /* - * Grab AC prescale - */ - lcd_ac_prescale = (lcdcon >> 25) & 0x1f; - } - - info->var.xres = info->var.xres_virtual; - info->var.yres = info->var.yres_virtual; - info->var.grayscale = info->var.bits_per_pixel > 1; - - size = info->var.xres * info->var.yres * info->var.bits_per_pixel / 8; - - /* - * Might be worth checking to see if we can use the on-board - * RAM if size here... - * CLPS7110 - no on-board SRAM - * EP7212 - 38400 bytes - */ - if (size <= 38400) { - printk(KERN_INFO "CLPS711xFB: could use on-board SRAM?\n"); - } - - if ((syscon & SYSCON1_LCDEN) == 0) { - /* - * The display isn't running. Ensure that - * the display memory is empty. - */ - memset(virt_base, 0, size); - } - - info->screen_base = virt_base; - info->fix.smem_start = phys_base; - info->fix.smem_len = PAGE_ALIGN(size); - info->fix.type = FB_TYPE_PACKED_PIXELS; -} - -static int clps711x_fb_probe(struct platform_device *pdev) -{ - int err = -ENOMEM; - - if (fb_get_options("clps711xfb", NULL)) - return -ENODEV; - - cfb = kzalloc(sizeof(*cfb), GFP_KERNEL); - if (!cfb) - goto out; - - strcpy(cfb->fix.id, "clps711x"); - - cfb->fbops = &clps7111fb_ops; - cfb->flags = FBINFO_DEFAULT; - - clps711x_guess_lcd_params(cfb); - - fb_alloc_cmap(&cfb->cmap, CMAP_MAX_SIZE, 0); - - err = register_framebuffer(cfb); - -out: return err; -} - -static int clps711x_fb_remove(struct platform_device *pdev) -{ - unregister_framebuffer(cfb); - kfree(cfb); - - return 0; -} - -static struct platform_driver clps711x_fb_driver = { - .driver = { - .name = "video-clps711x", - }, - .probe = clps711x_fb_probe, - .remove = clps711x_fb_remove, -}; -module_platform_driver(clps711x_fb_driver); - -MODULE_AUTHOR("Russell King "); -MODULE_DESCRIPTION("CLPS711X framebuffer driver"); -MODULE_LICENSE("GPL"); -- 2.4.9