All of lore.kernel.org
 help / color / mirror / Atom feed
From: Alexander Shiyan <shc_work-JGs/UdohzUI@public.gmane.org>
To: linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	Alexander Shiyan <shc_work-JGs/UdohzUI@public.gmane.org>
Subject: [PATCH 1/4] SPI: imx: Using existing properties for chipselects
Date: Wed,  8 Jun 2016 20:02:06 +0300	[thread overview]
Message-ID: <1465405329-5153-1-git-send-email-shc_work@mail.ru> (raw)

Patch reuse existing "chip_select" and "cs_gpio(s)" fields from SPI core.

Signed-off-by: Alexander Shiyan <shc_work-JGs/UdohzUI@public.gmane.org>
---
 drivers/spi/spi-imx.c | 124 +++++++++++++++++++++++---------------------------
 1 file changed, 58 insertions(+), 66 deletions(-)

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index 50769078..cbcfb8b 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -60,7 +60,6 @@ struct spi_imx_config {
 	unsigned int speed_hz;
 	unsigned int bpw;
 	unsigned int mode;
-	u8 cs;
 };
 
 enum spi_imx_devtype {
@@ -76,7 +75,7 @@ struct spi_imx_data;
 
 struct spi_imx_devtype_data {
 	void (*intctrl)(struct spi_imx_data *, int);
-	int (*config)(struct spi_imx_data *, struct spi_imx_config *);
+	int (*config)(struct spi_device *, struct spi_imx_config *);
 	void (*trigger)(struct spi_imx_data *);
 	int (*rx_available)(struct spi_imx_data *);
 	void (*reset)(struct spi_imx_data *);
@@ -112,7 +111,6 @@ struct spi_imx_data {
 	struct completion dma_tx_completion;
 
 	const struct spi_imx_devtype_data *devtype_data;
-	int chipselect[0];
 };
 
 static inline int is_imx27_cspi(struct spi_imx_data *d)
@@ -334,9 +332,10 @@ static void __maybe_unused mx51_ecspi_trigger(struct spi_imx_data *spi_imx)
 	writel(reg, spi_imx->base + MX51_ECSPI_CTRL);
 }
 
-static int __maybe_unused mx51_ecspi_config(struct spi_imx_data *spi_imx,
-		struct spi_imx_config *config)
+static int __maybe_unused mx51_ecspi_config(struct spi_device *spi,
+					    struct spi_imx_config *config)
 {
+	struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master);
 	u32 ctrl = MX51_ECSPI_CTRL_ENABLE;
 	u32 clk = config->speed_hz, delay, reg;
 	u32 cfg = readl(spi_imx->base + MX51_ECSPI_CONFIG);
@@ -355,28 +354,28 @@ static int __maybe_unused mx51_ecspi_config(struct spi_imx_data *spi_imx,
 	spi_imx->spi_bus_clk = clk;
 
 	/* set chip select to use */
-	ctrl |= MX51_ECSPI_CTRL_CS(config->cs);
+	ctrl |= MX51_ECSPI_CTRL_CS(spi->chip_select);
 
 	ctrl |= (config->bpw - 1) << MX51_ECSPI_CTRL_BL_OFFSET;
 
-	cfg |= MX51_ECSPI_CONFIG_SBBCTRL(config->cs);
+	cfg |= MX51_ECSPI_CONFIG_SBBCTRL(spi->chip_select);
 
 	if (config->mode & SPI_CPHA)
-		cfg |= MX51_ECSPI_CONFIG_SCLKPHA(config->cs);
+		cfg |= MX51_ECSPI_CONFIG_SCLKPHA(spi->chip_select);
 	else
-		cfg &= ~MX51_ECSPI_CONFIG_SCLKPHA(config->cs);
+		cfg &= ~MX51_ECSPI_CONFIG_SCLKPHA(spi->chip_select);
 
 	if (config->mode & SPI_CPOL) {
-		cfg |= MX51_ECSPI_CONFIG_SCLKPOL(config->cs);
-		cfg |= MX51_ECSPI_CONFIG_SCLKCTL(config->cs);
+		cfg |= MX51_ECSPI_CONFIG_SCLKPOL(spi->chip_select);
+		cfg |= MX51_ECSPI_CONFIG_SCLKCTL(spi->chip_select);
 	} else {
-		cfg &= ~MX51_ECSPI_CONFIG_SCLKPOL(config->cs);
-		cfg &= ~MX51_ECSPI_CONFIG_SCLKCTL(config->cs);
+		cfg &= ~MX51_ECSPI_CONFIG_SCLKPOL(spi->chip_select);
+		cfg &= ~MX51_ECSPI_CONFIG_SCLKCTL(spi->chip_select);
 	}
 	if (config->mode & SPI_CS_HIGH)
-		cfg |= MX51_ECSPI_CONFIG_SSBPOL(config->cs);
+		cfg |= MX51_ECSPI_CONFIG_SSBPOL(spi->chip_select);
 	else
-		cfg &= ~MX51_ECSPI_CONFIG_SSBPOL(config->cs);
+		cfg &= ~MX51_ECSPI_CONFIG_SSBPOL(spi->chip_select);
 
 	if (spi_imx->usedma)
 		ctrl |= MX51_ECSPI_CTRL_SMC;
@@ -480,11 +479,11 @@ static void __maybe_unused mx31_trigger(struct spi_imx_data *spi_imx)
 	writel(reg, spi_imx->base + MXC_CSPICTRL);
 }
 
-static int __maybe_unused mx31_config(struct spi_imx_data *spi_imx,
-		struct spi_imx_config *config)
+static int __maybe_unused mx31_config(struct spi_device *spi,
+				      struct spi_imx_config *config)
 {
+	struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master);
 	unsigned int reg = MX31_CSPICTRL_ENABLE | MX31_CSPICTRL_MASTER;
-	int cs = spi_imx->chipselect[config->cs];
 
 	reg |= spi_imx_clkdiv_2(spi_imx->spi_clk, config->speed_hz) <<
 		MX31_CSPICTRL_DR_SHIFT;
@@ -502,8 +501,8 @@ static int __maybe_unused mx31_config(struct spi_imx_data *spi_imx,
 		reg |= MX31_CSPICTRL_POL;
 	if (config->mode & SPI_CS_HIGH)
 		reg |= MX31_CSPICTRL_SSPOL;
-	if (cs < 0)
-		reg |= (cs + 32) <<
+	if (spi->cs_gpio < 0)
+		reg |= (spi->cs_gpio + 32) <<
 			(is_imx35_cspi(spi_imx) ? MX35_CSPICTRL_CS_SHIFT :
 						  MX31_CSPICTRL_CS_SHIFT);
 
@@ -558,11 +557,11 @@ static void __maybe_unused mx21_trigger(struct spi_imx_data *spi_imx)
 	writel(reg, spi_imx->base + MXC_CSPICTRL);
 }
 
-static int __maybe_unused mx21_config(struct spi_imx_data *spi_imx,
-		struct spi_imx_config *config)
+static int __maybe_unused mx21_config(struct spi_device *spi,
+				      struct spi_imx_config *config)
 {
+	struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master);
 	unsigned int reg = MX21_CSPICTRL_ENABLE | MX21_CSPICTRL_MASTER;
-	int cs = spi_imx->chipselect[config->cs];
 	unsigned int max = is_imx27_cspi(spi_imx) ? 16 : 18;
 
 	reg |= spi_imx_clkdiv_1(spi_imx->spi_clk, config->speed_hz, max) <<
@@ -575,8 +574,8 @@ static int __maybe_unused mx21_config(struct spi_imx_data *spi_imx,
 		reg |= MX21_CSPICTRL_POL;
 	if (config->mode & SPI_CS_HIGH)
 		reg |= MX21_CSPICTRL_SSPOL;
-	if (cs < 0)
-		reg |= (cs + 32) << MX21_CSPICTRL_CS_SHIFT;
+	if (spi->cs_gpio < 0)
+		reg |= (spi->cs_gpio + 32) << MX21_CSPICTRL_CS_SHIFT;
 
 	writel(reg, spi_imx->base + MXC_CSPICTRL);
 
@@ -625,9 +624,10 @@ static void __maybe_unused mx1_trigger(struct spi_imx_data *spi_imx)
 	writel(reg, spi_imx->base + MXC_CSPICTRL);
 }
 
-static int __maybe_unused mx1_config(struct spi_imx_data *spi_imx,
-		struct spi_imx_config *config)
+static int __maybe_unused mx1_config(struct spi_device *spi,
+				     struct spi_imx_config *config)
 {
+	struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master);
 	unsigned int reg = MX1_CSPICTRL_ENABLE | MX1_CSPICTRL_MASTER;
 
 	reg |= spi_imx_clkdiv_2(spi_imx->spi_clk, config->speed_hz) <<
@@ -747,15 +747,13 @@ MODULE_DEVICE_TABLE(of, spi_imx_dt_ids);
 
 static void spi_imx_chipselect(struct spi_device *spi, int is_active)
 {
-	struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master);
-	int gpio = spi_imx->chipselect[spi->chip_select];
 	int active = is_active != BITBANG_CS_INACTIVE;
 	int dev_is_lowactive = !(spi->mode & SPI_CS_HIGH);
 
-	if (!gpio_is_valid(gpio))
+	if (!gpio_is_valid(spi->cs_gpio))
 		return;
 
-	gpio_set_value(gpio, dev_is_lowactive ^ active);
+	gpio_set_value(spi->cs_gpio, dev_is_lowactive ^ active);
 }
 
 static void spi_imx_push(struct spi_imx_data *spi_imx)
@@ -860,7 +858,6 @@ static int spi_imx_setupxfer(struct spi_device *spi,
 	config.bpw = t ? t->bits_per_word : spi->bits_per_word;
 	config.speed_hz  = t ? t->speed_hz : spi->max_speed_hz;
 	config.mode = spi->mode;
-	config.cs = spi->chip_select;
 
 	if (!config.speed_hz)
 		config.speed_hz = spi->max_speed_hz;
@@ -891,7 +888,7 @@ static int spi_imx_setupxfer(struct spi_device *spi,
 			return ret;
 	}
 
-	spi_imx->devtype_data->config(spi_imx, &config);
+	spi_imx->devtype_data->config(spi, &config);
 
 	return 0;
 }
@@ -1080,14 +1077,12 @@ static int spi_imx_transfer(struct spi_device *spi,
 
 static int spi_imx_setup(struct spi_device *spi)
 {
-	struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master);
-	int gpio = spi_imx->chipselect[spi->chip_select];
-
 	dev_dbg(&spi->dev, "%s: mode %d, %u bpw, %d hz\n", __func__,
 		 spi->mode, spi->bits_per_word, spi->max_speed_hz);
 
-	if (gpio_is_valid(gpio))
-		gpio_direction_output(gpio, spi->mode & SPI_CS_HIGH ? 0 : 1);
+	if (gpio_is_valid(spi->cs_gpio))
+		gpio_direction_output(spi->cs_gpio,
+				      spi->mode & SPI_CS_HIGH ? 0 : 1);
 
 	spi_imx_chipselect(spi, BITBANG_CS_INACTIVE);
 
@@ -1137,31 +1132,21 @@ static int spi_imx_probe(struct platform_device *pdev)
 	struct spi_master *master;
 	struct spi_imx_data *spi_imx;
 	struct resource *res;
-	int i, ret, num_cs, irq;
+	int i, ret, irq;
 
 	if (!np && !mxc_platform_info) {
 		dev_err(&pdev->dev, "can't get the platform data\n");
 		return -EINVAL;
 	}
 
-	ret = of_property_read_u32(np, "fsl,spi-num-chipselects", &num_cs);
-	if (ret < 0) {
-		if (mxc_platform_info)
-			num_cs = mxc_platform_info->num_chipselect;
-		else
-			return ret;
-	}
-
-	master = spi_alloc_master(&pdev->dev,
-			sizeof(struct spi_imx_data) + sizeof(int) * num_cs);
+	master = spi_alloc_master(&pdev->dev, sizeof(struct spi_imx_data));
 	if (!master)
 		return -ENOMEM;
 
 	platform_set_drvdata(pdev, master);
 
 	master->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 32);
-	master->bus_num = pdev->id;
-	master->num_chipselect = num_cs;
+	master->bus_num = np ? -1 : pdev->id;
 
 	spi_imx = spi_master_get_devdata(master);
 	spi_imx->bitbang.master = master;
@@ -1170,22 +1155,16 @@ static int spi_imx_probe(struct platform_device *pdev)
 	spi_imx->devtype_data = of_id ? of_id->data :
 		(struct spi_imx_devtype_data *)pdev->id_entry->driver_data;
 
-	for (i = 0; i < master->num_chipselect; i++) {
-		int cs_gpio = of_get_named_gpio(np, "cs-gpios", i);
-		if (!gpio_is_valid(cs_gpio) && mxc_platform_info)
-			cs_gpio = mxc_platform_info->chipselect[i];
-
-		spi_imx->chipselect[i] = cs_gpio;
-		if (!gpio_is_valid(cs_gpio))
-			continue;
+	if (mxc_platform_info) {
+		master->num_chipselect = mxc_platform_info->num_chipselect;
+		master->cs_gpios = devm_kzalloc(&master->dev,
+			sizeof(int) * master->num_chipselect, GFP_KERNEL);
+		if (!master->cs_gpios)
+			return -ENOMEM;
 
-		ret = devm_gpio_request(&pdev->dev, spi_imx->chipselect[i],
-					DRIVER_NAME);
-		if (ret) {
-			dev_err(&pdev->dev, "can't get cs gpios\n");
-			goto out_master_put;
-		}
-	}
+		for (i = 0; i < master->num_chipselect; i++)
+			master->cs_gpios[i] = mxc_platform_info->chipselect[i];
+ 	}
 
 	spi_imx->bitbang.chipselect = spi_imx_chipselect;
 	spi_imx->bitbang.setup_transfer = spi_imx_setupxfer;
@@ -1267,6 +1246,19 @@ static int spi_imx_probe(struct platform_device *pdev)
 		goto out_clk_put;
 	}
 
+	for (i = 0; i < master->num_chipselect; i++) {
+		if (!gpio_is_valid(master->cs_gpios[i]))
+			continue;
+
+		ret = devm_gpio_request(&pdev->dev, master->cs_gpios[i],
+					DRIVER_NAME);
+		if (ret) {
+			dev_err(&pdev->dev, "Can't get CS GPIO %i\n",
+				master->cs_gpios[i]);
+			goto out_clk_put;
+		}
+	}
+
 	dev_info(&pdev->dev, "probed\n");
 
 	clk_disable(spi_imx->clk_ipg);
-- 
2.4.9

--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

             reply	other threads:[~2016-06-08 17:02 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-06-08 17:02 Alexander Shiyan [this message]
     [not found] ` <1465405329-5153-1-git-send-email-shc_work-JGs/UdohzUI@public.gmane.org>
2016-06-08 17:02   ` [PATCH 2/4] SPI: imx: Remove unnecessary field "mode" from struct spi_imx_config Alexander Shiyan
     [not found]     ` <1465405329-5153-2-git-send-email-shc_work-JGs/UdohzUI@public.gmane.org>
2016-06-14  9:19       ` Applied "SPI: imx: Remove unnecessary field "mode" from struct spi_imx_config" to the spi tree Mark Brown
2016-06-08 17:02   ` [PATCH 3/4] SPI: imx: Remove "maybe_unused" attributes Alexander Shiyan
     [not found]     ` <1465405329-5153-3-git-send-email-shc_work-JGs/UdohzUI@public.gmane.org>
2016-06-14  9:19       ` Applied "SPI: imx: Remove "maybe_unused" attributes" to the spi tree Mark Brown
2016-06-08 17:02   ` [PATCH 4/4] SPI: imx: Update DT binding documentation Alexander Shiyan
     [not found]     ` <1465405329-5153-4-git-send-email-shc_work-JGs/UdohzUI@public.gmane.org>
2016-06-14  9:19       ` Applied "SPI: imx: Update DT binding documentation" to the spi tree Mark Brown
2016-06-14  9:19   ` Applied "SPI: imx: Using existing properties for chipselects" " Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1465405329-5153-1-git-send-email-shc_work@mail.ru \
    --to=shc_work-jgs/udohzui@public.gmane.org \
    --cc=broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.