From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1424025AbcFHXAg (ORCPT ); Wed, 8 Jun 2016 19:00:36 -0400 Received: from mail-pa0-f49.google.com ([209.85.220.49]:36440 "EHLO mail-pa0-f49.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1423847AbcFHXAb (ORCPT ); Wed, 8 Jun 2016 19:00:31 -0400 From: Ed Swierk To: tpmdd-devel@lists.sourceforge.net Cc: eswierk@skyportsystems.com, stefanb@us.ibm.com, jarkko.sakkinen@linux.intel.com, linux-kernel@vger.kernel.org, linux-security-module@vger.kernel.org, jgunthorpe@obsidianresearch.com Subject: [PATCH v5 2/4] tpm: Add optional logging of TPM command durations Date: Wed, 8 Jun 2016 16:00:16 -0700 Message-Id: <1465426818-89356-3-git-send-email-eswierk@skyportsystems.com> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1465426818-89356-1-git-send-email-eswierk@skyportsystems.com> References: <1465346740-60120-1-git-send-email-eswierk@skyportsystems.com> <1465426818-89356-1-git-send-email-eswierk@skyportsystems.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Some TPMs violate their own advertised command durations. This is much easier to debug with data about how long each command actually takes to complete. Add debug messages that can be enabled by running echo -n 'module tpm +p' >/sys/kernel/debug/dynamic_debug/control on a kernel configured with DYNAMIC_DEBUG=y. Signed-off-by: Ed Swierk Reviewed-by: Jarkko Sakkinen --- drivers/char/tpm/tpm-interface.c | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-) diff --git a/drivers/char/tpm/tpm-interface.c b/drivers/char/tpm/tpm-interface.c index c50637d..cc1e5bc 100644 --- a/drivers/char/tpm/tpm-interface.c +++ b/drivers/char/tpm/tpm-interface.c @@ -333,13 +333,14 @@ ssize_t tpm_transmit(struct tpm_chip *chip, const char *buf, { ssize_t rc; u32 count, ordinal; - unsigned long stop; + unsigned long start, stop; if (bufsiz > TPM_BUFSIZE) bufsiz = TPM_BUFSIZE; count = be32_to_cpu(*((__be32 *) (buf + 2))); ordinal = be32_to_cpu(*((__be32 *) (buf + 6))); + dev_dbg(chip->pdev, "starting command %d count %d\n", ordinal, count); if (count == 0) return -ENODATA; if (count > bufsiz) { @@ -360,18 +361,24 @@ ssize_t tpm_transmit(struct tpm_chip *chip, const char *buf, if (chip->vendor.irq) goto out_recv; + start = jiffies; if (chip->flags & TPM_CHIP_FLAG_TPM2) - stop = jiffies + tpm2_calc_ordinal_duration(chip, ordinal); + stop = start + tpm2_calc_ordinal_duration(chip, ordinal); else - stop = jiffies + tpm_calc_ordinal_duration(chip, ordinal); + stop = start + tpm_calc_ordinal_duration(chip, ordinal); do { u8 status = chip->ops->status(chip); if ((status & chip->ops->req_complete_mask) == - chip->ops->req_complete_val) + chip->ops->req_complete_val) { + dev_dbg(chip->pdev, "completed command %d in %d ms\n", + ordinal, jiffies_to_msecs(jiffies - start)); goto out_recv; + } if (chip->ops->req_canceled(chip, status)) { dev_err(chip->pdev, "Operation Canceled\n"); + dev_dbg(chip->pdev, "canceled command %d after %d ms\n", + ordinal, jiffies_to_msecs(jiffies - start)); rc = -ECANCELED; goto out; } @@ -382,6 +389,8 @@ ssize_t tpm_transmit(struct tpm_chip *chip, const char *buf, chip->ops->cancel(chip); dev_err(chip->pdev, "Operation Timed out\n"); + dev_dbg(chip->pdev, "command %d timed out after %d ms\n", ordinal, + jiffies_to_msecs(jiffies - start)); rc = -ETIME; goto out; -- 1.9.1 From mboxrd@z Thu Jan 1 00:00:00 1970 From: Ed Swierk Subject: [PATCH v5 2/4] tpm: Add optional logging of TPM command durations Date: Wed, 8 Jun 2016 16:00:16 -0700 Message-ID: <1465426818-89356-3-git-send-email-eswierk@skyportsystems.com> References: <1465346740-60120-1-git-send-email-eswierk@skyportsystems.com> <1465426818-89356-1-git-send-email-eswierk@skyportsystems.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1465426818-89356-1-git-send-email-eswierk-FilZDy9cOaHkQYj/0HfcvtBPR1lH4CV8@public.gmane.org> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: tpmdd-devel-bounces-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org To: tpmdd-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-security-module-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-Id: tpmdd-devel@lists.sourceforge.net Some TPMs violate their own advertised command durations. This is much easier to debug with data about how long each command actually takes to complete. Add debug messages that can be enabled by running echo -n 'module tpm +p' >/sys/kernel/debug/dynamic_debug/control on a kernel configured with DYNAMIC_DEBUG=y. Signed-off-by: Ed Swierk Reviewed-by: Jarkko Sakkinen --- drivers/char/tpm/tpm-interface.c | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-) diff --git a/drivers/char/tpm/tpm-interface.c b/drivers/char/tpm/tpm-interface.c index c50637d..cc1e5bc 100644 --- a/drivers/char/tpm/tpm-interface.c +++ b/drivers/char/tpm/tpm-interface.c @@ -333,13 +333,14 @@ ssize_t tpm_transmit(struct tpm_chip *chip, const char *buf, { ssize_t rc; u32 count, ordinal; - unsigned long stop; + unsigned long start, stop; if (bufsiz > TPM_BUFSIZE) bufsiz = TPM_BUFSIZE; count = be32_to_cpu(*((__be32 *) (buf + 2))); ordinal = be32_to_cpu(*((__be32 *) (buf + 6))); + dev_dbg(chip->pdev, "starting command %d count %d\n", ordinal, count); if (count == 0) return -ENODATA; if (count > bufsiz) { @@ -360,18 +361,24 @@ ssize_t tpm_transmit(struct tpm_chip *chip, const char *buf, if (chip->vendor.irq) goto out_recv; + start = jiffies; if (chip->flags & TPM_CHIP_FLAG_TPM2) - stop = jiffies + tpm2_calc_ordinal_duration(chip, ordinal); + stop = start + tpm2_calc_ordinal_duration(chip, ordinal); else - stop = jiffies + tpm_calc_ordinal_duration(chip, ordinal); + stop = start + tpm_calc_ordinal_duration(chip, ordinal); do { u8 status = chip->ops->status(chip); if ((status & chip->ops->req_complete_mask) == - chip->ops->req_complete_val) + chip->ops->req_complete_val) { + dev_dbg(chip->pdev, "completed command %d in %d ms\n", + ordinal, jiffies_to_msecs(jiffies - start)); goto out_recv; + } if (chip->ops->req_canceled(chip, status)) { dev_err(chip->pdev, "Operation Canceled\n"); + dev_dbg(chip->pdev, "canceled command %d after %d ms\n", + ordinal, jiffies_to_msecs(jiffies - start)); rc = -ECANCELED; goto out; } @@ -382,6 +389,8 @@ ssize_t tpm_transmit(struct tpm_chip *chip, const char *buf, chip->ops->cancel(chip); dev_err(chip->pdev, "Operation Timed out\n"); + dev_dbg(chip->pdev, "command %d timed out after %d ms\n", ordinal, + jiffies_to_msecs(jiffies - start)); rc = -ETIME; goto out; -- 1.9.1 ------------------------------------------------------------------------------ What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic patterns at an interface-level. Reveals which users, apps, and protocols are consuming the most bandwidth. Provides multi-vendor support for NetFlow, J-Flow, sFlow and other flows. Make informed decisions using capacity planning reports. https://ad.doubleclick.net/ddm/clk/305295220;132659582;e