From mboxrd@z Thu Jan 1 00:00:00 1970 From: Carlo Caione Date: Thu, 9 Jun 2016 16:45:43 +0200 Subject: [U-Boot] [PATCH 2/2] board: amlogic: Rename folder for Amlogic boards In-Reply-To: <1465483543-2240-1-git-send-email-carlo@caione.org> References: <1465483543-2240-1-git-send-email-carlo@caione.org> Message-ID: <1465483543-2240-3-git-send-email-carlo@caione.org> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de From: Carlo Caione s/hardkernel/amlogic/ to have a single place for all the amlogic-based boards. Signed-off-by: Carlo Caione --- arch/arm/mach-meson/Kconfig | 2 +- board/amlogic/odroid-c2/Kconfig | 12 ++++++ board/amlogic/odroid-c2/MAINTAINERS | 6 +++ board/amlogic/odroid-c2/Makefile | 7 ++++ board/amlogic/odroid-c2/README | 60 ++++++++++++++++++++++++++++++ board/amlogic/odroid-c2/odroid-c2.c | 67 ++++++++++++++++++++++++++++++++++ board/hardkernel/odroid-c2/Kconfig | 12 ------ board/hardkernel/odroid-c2/MAINTAINERS | 6 --- board/hardkernel/odroid-c2/Makefile | 7 ---- board/hardkernel/odroid-c2/README | 60 ------------------------------ board/hardkernel/odroid-c2/odroid-c2.c | 67 ---------------------------------- 11 files changed, 153 insertions(+), 153 deletions(-) create mode 100644 board/amlogic/odroid-c2/Kconfig create mode 100644 board/amlogic/odroid-c2/MAINTAINERS create mode 100644 board/amlogic/odroid-c2/Makefile create mode 100644 board/amlogic/odroid-c2/README create mode 100644 board/amlogic/odroid-c2/odroid-c2.c delete mode 100644 board/hardkernel/odroid-c2/Kconfig delete mode 100644 board/hardkernel/odroid-c2/MAINTAINERS delete mode 100644 board/hardkernel/odroid-c2/Makefile delete mode 100644 board/hardkernel/odroid-c2/README delete mode 100644 board/hardkernel/odroid-c2/odroid-c2.c diff --git a/arch/arm/mach-meson/Kconfig b/arch/arm/mach-meson/Kconfig index 77d3cfe..af3be59 100644 --- a/arch/arm/mach-meson/Kconfig +++ b/arch/arm/mach-meson/Kconfig @@ -26,6 +26,6 @@ config SYS_SOC config SYS_MALLOC_F_LEN default 0x1000 -source "board/hardkernel/odroid-c2/Kconfig" +source "board/amlogic/odroid-c2/Kconfig" endif diff --git a/board/amlogic/odroid-c2/Kconfig b/board/amlogic/odroid-c2/Kconfig new file mode 100644 index 0000000..2b16889 --- /dev/null +++ b/board/amlogic/odroid-c2/Kconfig @@ -0,0 +1,12 @@ +if TARGET_ODROID_C2 + +config SYS_BOARD + default "odroid-c2" + +config SYS_VENDOR + default "amlogic" + +config SYS_CONFIG_NAME + default "odroid-c2" + +endif diff --git a/board/amlogic/odroid-c2/MAINTAINERS b/board/amlogic/odroid-c2/MAINTAINERS new file mode 100644 index 0000000..699850f --- /dev/null +++ b/board/amlogic/odroid-c2/MAINTAINERS @@ -0,0 +1,6 @@ +ODROID-C2 +M: Beniamino Galvani +S: Maintained +F: board/amlogic/odroid-c2/ +F: include/configs/odroid-c2.h +F: configs/odroid-c2_defconfig diff --git a/board/amlogic/odroid-c2/Makefile b/board/amlogic/odroid-c2/Makefile new file mode 100644 index 0000000..571044b --- /dev/null +++ b/board/amlogic/odroid-c2/Makefile @@ -0,0 +1,7 @@ +# +# (C) Copyright 2016 Beniamino Galvani +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y := odroid-c2.o diff --git a/board/amlogic/odroid-c2/README b/board/amlogic/odroid-c2/README new file mode 100644 index 0000000..d6d266a --- /dev/null +++ b/board/amlogic/odroid-c2/README @@ -0,0 +1,60 @@ +U-Boot for ODROID-C2 +==================== + +ODROID-C2 is a single board computer manufactured by Hardkernel +Co. Ltd with the following specifications: + + - Amlogic S905 ARM Cortex-A53 quad-core SoC @ 2GHz + - ARM Mali 450 GPU + - 2GB DDR3 SDRAM + - Gigabit Ethernet + - HDMI 2.0 4K/60Hz display + - 40-pin GPIO header + - 4 x USB 2.0 Host, 1 x USB OTG + - eMMC, microSD + - Infrared receiver + +Schematics are available on the manufacturer website. + +Currently the u-boot port supports the following devices: + - serial + - Ethernet + +u-boot compilation +================== + + > export ARCH=arm + > export CROSS_COMPILE=aarch64-none-elf- + > make odroid-c2_defconfig + > make + +Image creation +============== + +Amlogic doesn't provide sources for the firmware and for tools needed +to create the bootloader image, so it is necessary to obtain them from +the git tree published by the board vendor: + + > DIR=odroid-c2 + > git clone --depth 1 \ + https://github.com/hardkernel/u-boot.git -b odroidc2-v2015.01 \ + $DIR + > $DIR/fip/fip_create --bl30 $DIR/fip/gxb/bl30.bin \ + --bl301 $DIR/fip/gxb/bl301.bin \ + --bl31 $DIR/fip/gxb/bl31.bin \ + --bl33 u-boot.bin \ + $DIR/fip.bin + > $DIR/fip/fip_create --dump $DIR/fip.bin + > cat $DIR/fip/gxb/bl2.package $DIR/fip.bin > $DIR/boot_new.bin + > $DIR/fip/gxb/aml_encrypt_gxb --bootsig \ + --input $DIR/boot_new.bin \ + --output $DIR/u-boot.img + > dd if=$DIR/u-boot.img of=$DIR/u-boot.gxbb bs=512 skip=96 + +and then write the image to SD with: + + > DEV=/dev/your_sd_device + > BL1=$DIR/sd_fuse/bl1.bin.hardkernel + > dd if=$BL1 of=$DEV conv=fsync bs=1 count=442 + > dd if=$BL1 of=$DEV conv=fsync bs=512 skip=1 seek=1 + > dd if=$DIR/u-boot.gxbb of=$DEV conv=fsync bs=512 seek=97 diff --git a/board/amlogic/odroid-c2/odroid-c2.c b/board/amlogic/odroid-c2/odroid-c2.c new file mode 100644 index 0000000..bd72100 --- /dev/null +++ b/board/amlogic/odroid-c2/odroid-c2.c @@ -0,0 +1,67 @@ +/* + * (C) Copyright 2016 Beniamino Galvani + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include +#include + +#define EFUSE_SN_OFFSET 20 +#define EFUSE_SN_SIZE 16 +#define EFUSE_MAC_OFFSET 52 +#define EFUSE_MAC_SIZE 6 + +int board_init(void) +{ + return 0; +} + +static const struct eth_pdata gxbb_eth_pdata = { + .iobase = GXBB_ETH_BASE, + .phy_interface = PHY_INTERFACE_MODE_RGMII, +}; + +U_BOOT_DEVICE(meson_eth) = { + .name = "eth_designware", + .platdata = &gxbb_eth_pdata, +}; + +int misc_init_r(void) +{ + u8 mac_addr[EFUSE_MAC_SIZE]; + ssize_t len; + + /* Select Ethernet function */ + setbits_le32(GXBB_PINMUX(6), 0x3fff); + + /* Set RGMII mode */ + setbits_le32(GXBB_ETH_REG_0, GXBB_ETH_REG_0_PHY_INTF | + GXBB_ETH_REG_0_TX_PHASE(1) | + GXBB_ETH_REG_0_TX_RATIO(4) | + GXBB_ETH_REG_0_PHY_CLK_EN | + GXBB_ETH_REG_0_CLK_EN); + + /* Enable power and clock gate */ + setbits_le32(GXBB_GCLK_MPEG_1, GXBB_GCLK_MPEG_1_ETH); + clrbits_le32(GXBB_MEM_PD_REG_0, GXBB_MEM_PD_REG_0_ETH_MASK); + + /* Reset PHY on GPIOZ_14 */ + clrbits_le32(GXBB_GPIO_EN(3), BIT(14)); + clrbits_le32(GXBB_GPIO_OUT(3), BIT(14)); + mdelay(10); + setbits_le32(GXBB_GPIO_OUT(3), BIT(14)); + + if (!eth_getenv_enetaddr("ethaddr", mac_addr)) { + len = meson_sm_read_efuse(EFUSE_MAC_OFFSET, + mac_addr, EFUSE_MAC_SIZE); + if (len == EFUSE_MAC_SIZE && is_valid_ethaddr(mac_addr)) + eth_setenv_enetaddr("ethaddr", mac_addr); + } + + return 0; +} diff --git a/board/hardkernel/odroid-c2/Kconfig b/board/hardkernel/odroid-c2/Kconfig deleted file mode 100644 index 687d9c6..0000000 --- a/board/hardkernel/odroid-c2/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_ODROID_C2 - -config SYS_BOARD - default "odroid-c2" - -config SYS_VENDOR - default "hardkernel" - -config SYS_CONFIG_NAME - default "odroid-c2" - -endif diff --git a/board/hardkernel/odroid-c2/MAINTAINERS b/board/hardkernel/odroid-c2/MAINTAINERS deleted file mode 100644 index 23ae1e7..0000000 --- a/board/hardkernel/odroid-c2/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -ODROID-C2 -M: Beniamino Galvani -S: Maintained -F: board/hardkernel/odroid-c2/ -F: include/configs/odroid-c2.h -F: configs/odroid-c2_defconfig diff --git a/board/hardkernel/odroid-c2/Makefile b/board/hardkernel/odroid-c2/Makefile deleted file mode 100644 index 571044b..0000000 --- a/board/hardkernel/odroid-c2/Makefile +++ /dev/null @@ -1,7 +0,0 @@ -# -# (C) Copyright 2016 Beniamino Galvani -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := odroid-c2.o diff --git a/board/hardkernel/odroid-c2/README b/board/hardkernel/odroid-c2/README deleted file mode 100644 index d6d266a..0000000 --- a/board/hardkernel/odroid-c2/README +++ /dev/null @@ -1,60 +0,0 @@ -U-Boot for ODROID-C2 -==================== - -ODROID-C2 is a single board computer manufactured by Hardkernel -Co. Ltd with the following specifications: - - - Amlogic S905 ARM Cortex-A53 quad-core SoC @ 2GHz - - ARM Mali 450 GPU - - 2GB DDR3 SDRAM - - Gigabit Ethernet - - HDMI 2.0 4K/60Hz display - - 40-pin GPIO header - - 4 x USB 2.0 Host, 1 x USB OTG - - eMMC, microSD - - Infrared receiver - -Schematics are available on the manufacturer website. - -Currently the u-boot port supports the following devices: - - serial - - Ethernet - -u-boot compilation -================== - - > export ARCH=arm - > export CROSS_COMPILE=aarch64-none-elf- - > make odroid-c2_defconfig - > make - -Image creation -============== - -Amlogic doesn't provide sources for the firmware and for tools needed -to create the bootloader image, so it is necessary to obtain them from -the git tree published by the board vendor: - - > DIR=odroid-c2 - > git clone --depth 1 \ - https://github.com/hardkernel/u-boot.git -b odroidc2-v2015.01 \ - $DIR - > $DIR/fip/fip_create --bl30 $DIR/fip/gxb/bl30.bin \ - --bl301 $DIR/fip/gxb/bl301.bin \ - --bl31 $DIR/fip/gxb/bl31.bin \ - --bl33 u-boot.bin \ - $DIR/fip.bin - > $DIR/fip/fip_create --dump $DIR/fip.bin - > cat $DIR/fip/gxb/bl2.package $DIR/fip.bin > $DIR/boot_new.bin - > $DIR/fip/gxb/aml_encrypt_gxb --bootsig \ - --input $DIR/boot_new.bin \ - --output $DIR/u-boot.img - > dd if=$DIR/u-boot.img of=$DIR/u-boot.gxbb bs=512 skip=96 - -and then write the image to SD with: - - > DEV=/dev/your_sd_device - > BL1=$DIR/sd_fuse/bl1.bin.hardkernel - > dd if=$BL1 of=$DEV conv=fsync bs=1 count=442 - > dd if=$BL1 of=$DEV conv=fsync bs=512 skip=1 seek=1 - > dd if=$DIR/u-boot.gxbb of=$DEV conv=fsync bs=512 seek=97 diff --git a/board/hardkernel/odroid-c2/odroid-c2.c b/board/hardkernel/odroid-c2/odroid-c2.c deleted file mode 100644 index bd72100..0000000 --- a/board/hardkernel/odroid-c2/odroid-c2.c +++ /dev/null @@ -1,67 +0,0 @@ -/* - * (C) Copyright 2016 Beniamino Galvani - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include -#include -#include - -#define EFUSE_SN_OFFSET 20 -#define EFUSE_SN_SIZE 16 -#define EFUSE_MAC_OFFSET 52 -#define EFUSE_MAC_SIZE 6 - -int board_init(void) -{ - return 0; -} - -static const struct eth_pdata gxbb_eth_pdata = { - .iobase = GXBB_ETH_BASE, - .phy_interface = PHY_INTERFACE_MODE_RGMII, -}; - -U_BOOT_DEVICE(meson_eth) = { - .name = "eth_designware", - .platdata = &gxbb_eth_pdata, -}; - -int misc_init_r(void) -{ - u8 mac_addr[EFUSE_MAC_SIZE]; - ssize_t len; - - /* Select Ethernet function */ - setbits_le32(GXBB_PINMUX(6), 0x3fff); - - /* Set RGMII mode */ - setbits_le32(GXBB_ETH_REG_0, GXBB_ETH_REG_0_PHY_INTF | - GXBB_ETH_REG_0_TX_PHASE(1) | - GXBB_ETH_REG_0_TX_RATIO(4) | - GXBB_ETH_REG_0_PHY_CLK_EN | - GXBB_ETH_REG_0_CLK_EN); - - /* Enable power and clock gate */ - setbits_le32(GXBB_GCLK_MPEG_1, GXBB_GCLK_MPEG_1_ETH); - clrbits_le32(GXBB_MEM_PD_REG_0, GXBB_MEM_PD_REG_0_ETH_MASK); - - /* Reset PHY on GPIOZ_14 */ - clrbits_le32(GXBB_GPIO_EN(3), BIT(14)); - clrbits_le32(GXBB_GPIO_OUT(3), BIT(14)); - mdelay(10); - setbits_le32(GXBB_GPIO_OUT(3), BIT(14)); - - if (!eth_getenv_enetaddr("ethaddr", mac_addr)) { - len = meson_sm_read_efuse(EFUSE_MAC_OFFSET, - mac_addr, EFUSE_MAC_SIZE); - if (len == EFUSE_MAC_SIZE && is_valid_ethaddr(mac_addr)) - eth_setenv_enetaddr("ethaddr", mac_addr); - } - - return 0; -} -- 2.7.4 From mboxrd@z Thu Jan 1 00:00:00 1970 From: carlo@caione.org (Carlo Caione) Date: Thu, 9 Jun 2016 16:45:43 +0200 Subject: [PATCH 2/2] board: amlogic: Rename folder for Amlogic boards In-Reply-To: <1465483543-2240-1-git-send-email-carlo@caione.org> References: <1465483543-2240-1-git-send-email-carlo@caione.org> Message-ID: <1465483543-2240-3-git-send-email-carlo@caione.org> To: linus-amlogic@lists.infradead.org List-Id: linus-amlogic.lists.infradead.org From: Carlo Caione s/hardkernel/amlogic/ to have a single place for all the amlogic-based boards. Signed-off-by: Carlo Caione --- arch/arm/mach-meson/Kconfig | 2 +- board/amlogic/odroid-c2/Kconfig | 12 ++++++ board/amlogic/odroid-c2/MAINTAINERS | 6 +++ board/amlogic/odroid-c2/Makefile | 7 ++++ board/amlogic/odroid-c2/README | 60 ++++++++++++++++++++++++++++++ board/amlogic/odroid-c2/odroid-c2.c | 67 ++++++++++++++++++++++++++++++++++ board/hardkernel/odroid-c2/Kconfig | 12 ------ board/hardkernel/odroid-c2/MAINTAINERS | 6 --- board/hardkernel/odroid-c2/Makefile | 7 ---- board/hardkernel/odroid-c2/README | 60 ------------------------------ board/hardkernel/odroid-c2/odroid-c2.c | 67 ---------------------------------- 11 files changed, 153 insertions(+), 153 deletions(-) create mode 100644 board/amlogic/odroid-c2/Kconfig create mode 100644 board/amlogic/odroid-c2/MAINTAINERS create mode 100644 board/amlogic/odroid-c2/Makefile create mode 100644 board/amlogic/odroid-c2/README create mode 100644 board/amlogic/odroid-c2/odroid-c2.c delete mode 100644 board/hardkernel/odroid-c2/Kconfig delete mode 100644 board/hardkernel/odroid-c2/MAINTAINERS delete mode 100644 board/hardkernel/odroid-c2/Makefile delete mode 100644 board/hardkernel/odroid-c2/README delete mode 100644 board/hardkernel/odroid-c2/odroid-c2.c diff --git a/arch/arm/mach-meson/Kconfig b/arch/arm/mach-meson/Kconfig index 77d3cfe..af3be59 100644 --- a/arch/arm/mach-meson/Kconfig +++ b/arch/arm/mach-meson/Kconfig @@ -26,6 +26,6 @@ config SYS_SOC config SYS_MALLOC_F_LEN default 0x1000 -source "board/hardkernel/odroid-c2/Kconfig" +source "board/amlogic/odroid-c2/Kconfig" endif diff --git a/board/amlogic/odroid-c2/Kconfig b/board/amlogic/odroid-c2/Kconfig new file mode 100644 index 0000000..2b16889 --- /dev/null +++ b/board/amlogic/odroid-c2/Kconfig @@ -0,0 +1,12 @@ +if TARGET_ODROID_C2 + +config SYS_BOARD + default "odroid-c2" + +config SYS_VENDOR + default "amlogic" + +config SYS_CONFIG_NAME + default "odroid-c2" + +endif diff --git a/board/amlogic/odroid-c2/MAINTAINERS b/board/amlogic/odroid-c2/MAINTAINERS new file mode 100644 index 0000000..699850f --- /dev/null +++ b/board/amlogic/odroid-c2/MAINTAINERS @@ -0,0 +1,6 @@ +ODROID-C2 +M: Beniamino Galvani +S: Maintained +F: board/amlogic/odroid-c2/ +F: include/configs/odroid-c2.h +F: configs/odroid-c2_defconfig diff --git a/board/amlogic/odroid-c2/Makefile b/board/amlogic/odroid-c2/Makefile new file mode 100644 index 0000000..571044b --- /dev/null +++ b/board/amlogic/odroid-c2/Makefile @@ -0,0 +1,7 @@ +# +# (C) Copyright 2016 Beniamino Galvani +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y := odroid-c2.o diff --git a/board/amlogic/odroid-c2/README b/board/amlogic/odroid-c2/README new file mode 100644 index 0000000..d6d266a --- /dev/null +++ b/board/amlogic/odroid-c2/README @@ -0,0 +1,60 @@ +U-Boot for ODROID-C2 +==================== + +ODROID-C2 is a single board computer manufactured by Hardkernel +Co. Ltd with the following specifications: + + - Amlogic S905 ARM Cortex-A53 quad-core SoC @ 2GHz + - ARM Mali 450 GPU + - 2GB DDR3 SDRAM + - Gigabit Ethernet + - HDMI 2.0 4K/60Hz display + - 40-pin GPIO header + - 4 x USB 2.0 Host, 1 x USB OTG + - eMMC, microSD + - Infrared receiver + +Schematics are available on the manufacturer website. + +Currently the u-boot port supports the following devices: + - serial + - Ethernet + +u-boot compilation +================== + + > export ARCH=arm + > export CROSS_COMPILE=aarch64-none-elf- + > make odroid-c2_defconfig + > make + +Image creation +============== + +Amlogic doesn't provide sources for the firmware and for tools needed +to create the bootloader image, so it is necessary to obtain them from +the git tree published by the board vendor: + + > DIR=odroid-c2 + > git clone --depth 1 \ + https://github.com/hardkernel/u-boot.git -b odroidc2-v2015.01 \ + $DIR + > $DIR/fip/fip_create --bl30 $DIR/fip/gxb/bl30.bin \ + --bl301 $DIR/fip/gxb/bl301.bin \ + --bl31 $DIR/fip/gxb/bl31.bin \ + --bl33 u-boot.bin \ + $DIR/fip.bin + > $DIR/fip/fip_create --dump $DIR/fip.bin + > cat $DIR/fip/gxb/bl2.package $DIR/fip.bin > $DIR/boot_new.bin + > $DIR/fip/gxb/aml_encrypt_gxb --bootsig \ + --input $DIR/boot_new.bin \ + --output $DIR/u-boot.img + > dd if=$DIR/u-boot.img of=$DIR/u-boot.gxbb bs=512 skip=96 + +and then write the image to SD with: + + > DEV=/dev/your_sd_device + > BL1=$DIR/sd_fuse/bl1.bin.hardkernel + > dd if=$BL1 of=$DEV conv=fsync bs=1 count=442 + > dd if=$BL1 of=$DEV conv=fsync bs=512 skip=1 seek=1 + > dd if=$DIR/u-boot.gxbb of=$DEV conv=fsync bs=512 seek=97 diff --git a/board/amlogic/odroid-c2/odroid-c2.c b/board/amlogic/odroid-c2/odroid-c2.c new file mode 100644 index 0000000..bd72100 --- /dev/null +++ b/board/amlogic/odroid-c2/odroid-c2.c @@ -0,0 +1,67 @@ +/* + * (C) Copyright 2016 Beniamino Galvani + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include +#include + +#define EFUSE_SN_OFFSET 20 +#define EFUSE_SN_SIZE 16 +#define EFUSE_MAC_OFFSET 52 +#define EFUSE_MAC_SIZE 6 + +int board_init(void) +{ + return 0; +} + +static const struct eth_pdata gxbb_eth_pdata = { + .iobase = GXBB_ETH_BASE, + .phy_interface = PHY_INTERFACE_MODE_RGMII, +}; + +U_BOOT_DEVICE(meson_eth) = { + .name = "eth_designware", + .platdata = &gxbb_eth_pdata, +}; + +int misc_init_r(void) +{ + u8 mac_addr[EFUSE_MAC_SIZE]; + ssize_t len; + + /* Select Ethernet function */ + setbits_le32(GXBB_PINMUX(6), 0x3fff); + + /* Set RGMII mode */ + setbits_le32(GXBB_ETH_REG_0, GXBB_ETH_REG_0_PHY_INTF | + GXBB_ETH_REG_0_TX_PHASE(1) | + GXBB_ETH_REG_0_TX_RATIO(4) | + GXBB_ETH_REG_0_PHY_CLK_EN | + GXBB_ETH_REG_0_CLK_EN); + + /* Enable power and clock gate */ + setbits_le32(GXBB_GCLK_MPEG_1, GXBB_GCLK_MPEG_1_ETH); + clrbits_le32(GXBB_MEM_PD_REG_0, GXBB_MEM_PD_REG_0_ETH_MASK); + + /* Reset PHY on GPIOZ_14 */ + clrbits_le32(GXBB_GPIO_EN(3), BIT(14)); + clrbits_le32(GXBB_GPIO_OUT(3), BIT(14)); + mdelay(10); + setbits_le32(GXBB_GPIO_OUT(3), BIT(14)); + + if (!eth_getenv_enetaddr("ethaddr", mac_addr)) { + len = meson_sm_read_efuse(EFUSE_MAC_OFFSET, + mac_addr, EFUSE_MAC_SIZE); + if (len == EFUSE_MAC_SIZE && is_valid_ethaddr(mac_addr)) + eth_setenv_enetaddr("ethaddr", mac_addr); + } + + return 0; +} diff --git a/board/hardkernel/odroid-c2/Kconfig b/board/hardkernel/odroid-c2/Kconfig deleted file mode 100644 index 687d9c6..0000000 --- a/board/hardkernel/odroid-c2/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_ODROID_C2 - -config SYS_BOARD - default "odroid-c2" - -config SYS_VENDOR - default "hardkernel" - -config SYS_CONFIG_NAME - default "odroid-c2" - -endif diff --git a/board/hardkernel/odroid-c2/MAINTAINERS b/board/hardkernel/odroid-c2/MAINTAINERS deleted file mode 100644 index 23ae1e7..0000000 --- a/board/hardkernel/odroid-c2/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -ODROID-C2 -M: Beniamino Galvani -S: Maintained -F: board/hardkernel/odroid-c2/ -F: include/configs/odroid-c2.h -F: configs/odroid-c2_defconfig diff --git a/board/hardkernel/odroid-c2/Makefile b/board/hardkernel/odroid-c2/Makefile deleted file mode 100644 index 571044b..0000000 --- a/board/hardkernel/odroid-c2/Makefile +++ /dev/null @@ -1,7 +0,0 @@ -# -# (C) Copyright 2016 Beniamino Galvani -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := odroid-c2.o diff --git a/board/hardkernel/odroid-c2/README b/board/hardkernel/odroid-c2/README deleted file mode 100644 index d6d266a..0000000 --- a/board/hardkernel/odroid-c2/README +++ /dev/null @@ -1,60 +0,0 @@ -U-Boot for ODROID-C2 -==================== - -ODROID-C2 is a single board computer manufactured by Hardkernel -Co. Ltd with the following specifications: - - - Amlogic S905 ARM Cortex-A53 quad-core SoC @ 2GHz - - ARM Mali 450 GPU - - 2GB DDR3 SDRAM - - Gigabit Ethernet - - HDMI 2.0 4K/60Hz display - - 40-pin GPIO header - - 4 x USB 2.0 Host, 1 x USB OTG - - eMMC, microSD - - Infrared receiver - -Schematics are available on the manufacturer website. - -Currently the u-boot port supports the following devices: - - serial - - Ethernet - -u-boot compilation -================== - - > export ARCH=arm - > export CROSS_COMPILE=aarch64-none-elf- - > make odroid-c2_defconfig - > make - -Image creation -============== - -Amlogic doesn't provide sources for the firmware and for tools needed -to create the bootloader image, so it is necessary to obtain them from -the git tree published by the board vendor: - - > DIR=odroid-c2 - > git clone --depth 1 \ - https://github.com/hardkernel/u-boot.git -b odroidc2-v2015.01 \ - $DIR - > $DIR/fip/fip_create --bl30 $DIR/fip/gxb/bl30.bin \ - --bl301 $DIR/fip/gxb/bl301.bin \ - --bl31 $DIR/fip/gxb/bl31.bin \ - --bl33 u-boot.bin \ - $DIR/fip.bin - > $DIR/fip/fip_create --dump $DIR/fip.bin - > cat $DIR/fip/gxb/bl2.package $DIR/fip.bin > $DIR/boot_new.bin - > $DIR/fip/gxb/aml_encrypt_gxb --bootsig \ - --input $DIR/boot_new.bin \ - --output $DIR/u-boot.img - > dd if=$DIR/u-boot.img of=$DIR/u-boot.gxbb bs=512 skip=96 - -and then write the image to SD with: - - > DEV=/dev/your_sd_device - > BL1=$DIR/sd_fuse/bl1.bin.hardkernel - > dd if=$BL1 of=$DEV conv=fsync bs=1 count=442 - > dd if=$BL1 of=$DEV conv=fsync bs=512 skip=1 seek=1 - > dd if=$DIR/u-boot.gxbb of=$DEV conv=fsync bs=512 seek=97 diff --git a/board/hardkernel/odroid-c2/odroid-c2.c b/board/hardkernel/odroid-c2/odroid-c2.c deleted file mode 100644 index bd72100..0000000 --- a/board/hardkernel/odroid-c2/odroid-c2.c +++ /dev/null @@ -1,67 +0,0 @@ -/* - * (C) Copyright 2016 Beniamino Galvani - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include -#include -#include - -#define EFUSE_SN_OFFSET 20 -#define EFUSE_SN_SIZE 16 -#define EFUSE_MAC_OFFSET 52 -#define EFUSE_MAC_SIZE 6 - -int board_init(void) -{ - return 0; -} - -static const struct eth_pdata gxbb_eth_pdata = { - .iobase = GXBB_ETH_BASE, - .phy_interface = PHY_INTERFACE_MODE_RGMII, -}; - -U_BOOT_DEVICE(meson_eth) = { - .name = "eth_designware", - .platdata = &gxbb_eth_pdata, -}; - -int misc_init_r(void) -{ - u8 mac_addr[EFUSE_MAC_SIZE]; - ssize_t len; - - /* Select Ethernet function */ - setbits_le32(GXBB_PINMUX(6), 0x3fff); - - /* Set RGMII mode */ - setbits_le32(GXBB_ETH_REG_0, GXBB_ETH_REG_0_PHY_INTF | - GXBB_ETH_REG_0_TX_PHASE(1) | - GXBB_ETH_REG_0_TX_RATIO(4) | - GXBB_ETH_REG_0_PHY_CLK_EN | - GXBB_ETH_REG_0_CLK_EN); - - /* Enable power and clock gate */ - setbits_le32(GXBB_GCLK_MPEG_1, GXBB_GCLK_MPEG_1_ETH); - clrbits_le32(GXBB_MEM_PD_REG_0, GXBB_MEM_PD_REG_0_ETH_MASK); - - /* Reset PHY on GPIOZ_14 */ - clrbits_le32(GXBB_GPIO_EN(3), BIT(14)); - clrbits_le32(GXBB_GPIO_OUT(3), BIT(14)); - mdelay(10); - setbits_le32(GXBB_GPIO_OUT(3), BIT(14)); - - if (!eth_getenv_enetaddr("ethaddr", mac_addr)) { - len = meson_sm_read_efuse(EFUSE_MAC_OFFSET, - mac_addr, EFUSE_MAC_SIZE); - if (len == EFUSE_MAC_SIZE && is_valid_ethaddr(mac_addr)) - eth_setenv_enetaddr("ethaddr", mac_addr); - } - - return 0; -} -- 2.7.4