All of lore.kernel.org
 help / color / mirror / Atom feed
From: Fan Zhang <roy.fan.zhang@intel.com>
To: dev@dpdk.org
Cc: declan.doherty@intel.com
Subject: [PATCH v4 2/4] app/test: add unified crypto aes test
Date: Mon, 13 Jun 2016 15:08:11 +0100	[thread overview]
Message-ID: <1465826893-20392-3-git-send-email-roy.fan.zhang@intel.com> (raw)
In-Reply-To: <1465826893-20392-1-git-send-email-roy.fan.zhang@intel.com>

This patch adds a new crypto AES unified test function.

Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
---
 app/test/Makefile             |   1 +
 app/test/test_cryptodev_aes.c | 663 ++++++++++++++++++++++++++++++++++++++++++
 app/test/test_cryptodev_aes.h |   6 +
 3 files changed, 670 insertions(+)
 create mode 100755 app/test/test_cryptodev_aes.c

diff --git a/app/test/Makefile b/app/test/Makefile
index f269fe0..fd193df 100644
--- a/app/test/Makefile
+++ b/app/test/Makefile
@@ -153,6 +153,7 @@ endif
 SRCS-$(CONFIG_RTE_LIBRTE_PMD_RING) += test_pmd_ring.c
 SRCS-$(CONFIG_RTE_LIBRTE_PMD_RING) += test_pmd_ring_perf.c
 
+SRCS-$(CONFIG_RTE_LIBRTE_CRYPTODEV) += test_cryptodev_aes.c
 SRCS-$(CONFIG_RTE_LIBRTE_CRYPTODEV) += test_cryptodev_perf.c
 SRCS-$(CONFIG_RTE_LIBRTE_CRYPTODEV) += test_cryptodev.c
 
diff --git a/app/test/test_cryptodev_aes.c b/app/test/test_cryptodev_aes.c
new file mode 100755
index 0000000..3b5f005
--- /dev/null
+++ b/app/test/test_cryptodev_aes.c
@@ -0,0 +1,663 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2015-2016 Intel Corporation. All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *	 * Redistributions of source code must retain the above copyright
+ *	   notice, this list of conditions and the following disclaimer.
+ *	 * Redistributions in binary form must reproduce the above copyright
+ *	   notice, this list of conditions and the following disclaimer in
+ *	   the documentation and/or other materials provided with the
+ *	   distribution.
+ *	 * Neither the name of Intel Corporation nor the names of its
+ *	   contributors may be used to endorse or promote products derived
+ *	   from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <rte_common.h>
+#include <rte_hexdump.h>
+#include <rte_mbuf.h>
+#include <rte_malloc.h>
+#include <rte_memcpy.h>
+
+#include <rte_crypto.h>
+#include <rte_cryptodev.h>
+#include <rte_cryptodev_pmd.h>
+
+#include "test.h"
+#include "test_cryptodev_aes.h"
+
+#ifndef MAX_N_AES_TESTS
+#define MAX_N_AES_TESTS			256
+#endif
+
+#ifndef AES_TEST_MSG_LEN
+#define AES_TEST_MSG_LEN		256
+#endif
+
+#define AES_TEST_OP_ENCRYPT		0x01
+#define AES_TEST_OP_DECRYPT		0x02
+#define AES_TEST_OP_AUTH_GEN		0x04
+#define AES_TEST_OP_AUTH_VERIFY		0x08
+
+#define AES_TEST_FEATURE_OOP		0x01
+#define AES_TEST_FEATURE_SESSIONLESS	0x02
+#define AES_TEST_FEATURE_STOPPER	0x04 /* stop upon failing */
+
+#define AES_TEST_TARGET_PMD_MB		0x0001 /* Multi-buffer flag */
+#define AES_TEST_TARGET_PMD_QAT		0x0002 /* QAT flag */
+
+#define AES_TEST_OP_CIPHER		(AES_TEST_OP_ENCRYPT |		\
+					AES_TEST_OP_DECRYPT)
+
+#define AES_TEST_OP_AUTH		(AES_TEST_OP_AUTH_GEN |		\
+					AES_TEST_OP_AUTH_VERIFY)
+
+#define AES_TEST_OP_ENC_AUTH_GEN	(AES_TEST_OP_ENCRYPT |		\
+					AES_TEST_OP_AUTH_GEN)
+
+#define AES_TEST_OP_AUTH_VERIFY_DEC	(AES_TEST_OP_DECRYPT |		\
+					AES_TEST_OP_AUTH_VERIFY)
+
+struct aes_test_case {
+	const char *test_descr; /* test description */
+	const struct aes_test_data *test_data;
+	uint8_t op_mask; /* operation mask */
+	uint8_t feature_mask;
+	uint32_t pmd_mask;
+};
+
+static const struct aes_test_case aes_test_cases[] = {
+	{
+		.test_descr = "AES-128-CTR HMAC-SHA1 Encryption Digest",
+		.test_data = &aes_test_data_1,
+		.op_mask = AES_TEST_OP_ENC_AUTH_GEN,
+		.pmd_mask = AES_TEST_TARGET_PMD_MB |
+			AES_TEST_TARGET_PMD_QAT
+	},
+	{
+		.test_descr = "AES-128-CTR HMAC-SHA1 Decryption Digest "
+			"Verify",
+		.test_data = &aes_test_data_1,
+		.op_mask = AES_TEST_OP_AUTH_VERIFY_DEC,
+		.pmd_mask = AES_TEST_TARGET_PMD_MB |
+			AES_TEST_TARGET_PMD_QAT
+	},
+	{
+		.test_descr = "AES-192-CTR XCBC Encryption Digest",
+		.test_data = &aes_test_data_2,
+		.op_mask = AES_TEST_OP_ENC_AUTH_GEN,
+		.pmd_mask = AES_TEST_TARGET_PMD_MB |
+			AES_TEST_TARGET_PMD_QAT
+	},
+	{
+		.test_descr = "AES-192-CTR XCBC Decryption Digest Verify",
+		.test_data = &aes_test_data_2,
+		.op_mask = AES_TEST_OP_AUTH_VERIFY_DEC,
+		.pmd_mask = AES_TEST_TARGET_PMD_MB |
+			AES_TEST_TARGET_PMD_QAT
+	},
+	{
+		.test_descr = "AES-256-CTR HMAC-SHA1 Encryption Digest",
+		.test_data = &aes_test_data_3,
+		.op_mask = AES_TEST_OP_ENC_AUTH_GEN,
+		.pmd_mask = AES_TEST_TARGET_PMD_MB |
+			AES_TEST_TARGET_PMD_QAT
+	},
+	{
+		.test_descr = "AES-256-CTR HMAC-SHA1 Decryption Digest "
+			"Verify",
+		.test_data = &aes_test_data_3,
+		.op_mask = AES_TEST_OP_AUTH_VERIFY_DEC,
+		.pmd_mask = AES_TEST_TARGET_PMD_MB |
+			AES_TEST_TARGET_PMD_QAT
+	},
+	{
+		.test_descr = "AES-128-CBC HMAC-SHA1 Encryption Digest",
+		.test_data = &aes_test_data_4,
+		.op_mask = AES_TEST_OP_ENC_AUTH_GEN,
+		.pmd_mask = AES_TEST_TARGET_PMD_MB |
+			AES_TEST_TARGET_PMD_QAT
+	},
+	{
+		.test_descr = "AES-128-CBC HMAC-SHA1 Decryption Digest "
+			"Verify",
+		.test_data = &aes_test_data_4,
+		.op_mask = AES_TEST_OP_AUTH_VERIFY_DEC,
+		.pmd_mask = AES_TEST_TARGET_PMD_MB |
+			AES_TEST_TARGET_PMD_QAT
+	},
+	{
+		.test_descr = "AES-128-CBC HMAC-SHA256 Encryption Digest",
+		.test_data = &aes_test_data_5,
+		.op_mask = AES_TEST_OP_ENC_AUTH_GEN,
+		.pmd_mask = AES_TEST_TARGET_PMD_MB |
+			AES_TEST_TARGET_PMD_QAT
+	},
+	{
+		.test_descr = "AES-128-CBC HMAC-SHA256 Decryption Digest "
+			"Verify",
+		.test_data = &aes_test_data_5,
+		.op_mask = AES_TEST_OP_AUTH_VERIFY_DEC,
+		.pmd_mask = AES_TEST_TARGET_PMD_MB |
+			AES_TEST_TARGET_PMD_QAT
+	},
+	{
+		.test_descr = "AES-128-CBC HMAC-SHA512 Encryption Digest",
+		.test_data = &aes_test_data_6,
+		.op_mask = AES_TEST_OP_ENC_AUTH_GEN,
+		.pmd_mask = AES_TEST_TARGET_PMD_MB |
+			AES_TEST_TARGET_PMD_QAT
+	},
+	{
+		.test_descr = "AES-128-CBC HMAC-SHA512 Encryption Digest "
+			"Sessionless",
+		.test_data = &aes_test_data_6,
+		.op_mask = AES_TEST_OP_ENC_AUTH_GEN,
+		.feature_mask = AES_TEST_FEATURE_SESSIONLESS,
+		.pmd_mask = AES_TEST_TARGET_PMD_MB
+	},
+	{
+		.test_descr = "AES-128-CBC HMAC-SHA512 Decryption Digest "
+			"Verify",
+		.test_data = &aes_test_data_6,
+		.op_mask = AES_TEST_OP_AUTH_VERIFY_DEC,
+		.pmd_mask = AES_TEST_TARGET_PMD_MB |
+			AES_TEST_TARGET_PMD_QAT
+	},
+	{
+		.test_descr = "AES-128-CBC XCBC Encryption Digest",
+		.test_data = &aes_test_data_7,
+		.op_mask = AES_TEST_OP_ENC_AUTH_GEN,
+		.pmd_mask = AES_TEST_TARGET_PMD_MB |
+			AES_TEST_TARGET_PMD_QAT
+	},
+	{
+		.test_descr = "AES-128-CBC XCBC Decryption Digest Verify",
+		.test_data = &aes_test_data_7,
+		.op_mask = AES_TEST_OP_AUTH_VERIFY_DEC,
+		.pmd_mask = AES_TEST_TARGET_PMD_MB |
+			AES_TEST_TARGET_PMD_QAT
+	},
+	{
+		.test_descr = "AES-128-CBC HMAC-SHA1 Encryption Digest "
+			"OOP",
+		.test_data = &aes_test_data_4,
+		.op_mask = AES_TEST_OP_ENC_AUTH_GEN,
+		.feature_mask = AES_TEST_FEATURE_OOP,
+		.pmd_mask = AES_TEST_TARGET_PMD_QAT
+	},
+	{
+		.test_descr = "AES-128-CBC HMAC-SHA1 Decryption Digest "
+			"Verify OOP",
+		.test_data = &aes_test_data_4,
+		.op_mask = AES_TEST_OP_AUTH_VERIFY_DEC,
+		.feature_mask = AES_TEST_FEATURE_OOP,
+		.pmd_mask = AES_TEST_TARGET_PMD_QAT
+	},
+};
+
+static int
+test_AES_one_case(const struct aes_test_case *t,
+	struct rte_mempool *mbuf_pool,
+	struct rte_mempool *op_mpool,
+	uint8_t dev_id,
+	enum rte_cryptodev_type cryptodev_type,
+	char *test_msg)
+{
+	struct rte_mbuf *ibuf = NULL;
+	struct rte_mbuf *obuf = NULL;
+	struct rte_mbuf *iobuf;
+	struct rte_crypto_sym_xform *cipher_xform = NULL;
+	struct rte_crypto_sym_xform *auth_xform = NULL;
+	struct rte_crypto_sym_xform *init_xform = NULL;
+	struct rte_crypto_sym_op *sym_op;
+	struct rte_crypto_op *op;
+	struct rte_cryptodev_sym_session *sess = NULL;
+
+	int status = TEST_SUCCESS;
+	const struct aes_test_data *tdata = t->test_data;
+	uint8_t cipher_key[tdata->cipher_key.len];
+	uint8_t auth_key[tdata->auth_key.len];
+	uint32_t buf_len = tdata->ciphertext.len;
+	uint32_t digest_len = 0;
+	char *buf_p;
+
+	if (tdata->cipher_key.len)
+		memcpy(cipher_key, tdata->cipher_key.data,
+			tdata->cipher_key.len);
+	if (tdata->auth_key.len)
+		memcpy(auth_key, tdata->auth_key.data,
+			tdata->auth_key.len);
+
+	switch (cryptodev_type) {
+	case RTE_CRYPTODEV_QAT_SYM_PMD:
+		digest_len = tdata->digest.len;
+		break;
+	case RTE_CRYPTODEV_AESNI_MB_PMD:
+		digest_len = tdata->digest.truncated_len;
+		break;
+	default:
+		snprintf(test_msg, AES_TEST_MSG_LEN, "line %u FAILED: %s",
+			__LINE__, "Unsupported PMD type");
+		status = TEST_FAILED;
+		goto error_exit;
+	}
+
+	/* preparing data */
+	ibuf = rte_pktmbuf_alloc(mbuf_pool);
+	if (!ibuf) {
+		snprintf(test_msg, AES_TEST_MSG_LEN, "line %u FAILED: %s",
+			__LINE__, "Allocation of rte_mbuf failed");
+		status = TEST_FAILED;
+		goto error_exit;
+	}
+
+	if (t->op_mask & AES_TEST_OP_CIPHER)
+		buf_len += tdata->iv.len;
+	if (t->op_mask & AES_TEST_OP_AUTH)
+		buf_len += digest_len;
+
+	buf_p = rte_pktmbuf_append(ibuf, buf_len);
+	if (!buf_p) {
+		snprintf(test_msg, AES_TEST_MSG_LEN, "line %u FAILED: %s",
+			__LINE__, "No room to append mbuf");
+		status = TEST_FAILED;
+		goto error_exit;
+	}
+
+	if (t->op_mask & AES_TEST_OP_CIPHER) {
+		rte_memcpy(buf_p, tdata->iv.data, tdata->iv.len);
+		buf_p += tdata->iv.len;
+	}
+
+	/* only encryption requires plaintext.data input,
+	 * decryption/(digest gen)/(digest verify) use ciphertext.data
+	 * to be computed */
+	if (t->op_mask & AES_TEST_OP_ENCRYPT) {
+		rte_memcpy(buf_p, tdata->plaintext.data,
+			tdata->plaintext.len);
+		buf_p += tdata->plaintext.len;
+	} else {
+		rte_memcpy(buf_p, tdata->ciphertext.data,
+			tdata->ciphertext.len);
+		buf_p += tdata->ciphertext.len;
+	}
+
+	if (t->op_mask & AES_TEST_OP_AUTH_VERIFY)
+		rte_memcpy(buf_p, tdata->digest.data, digest_len);
+	else
+		memset(buf_p, 0, digest_len);
+
+	if (t->feature_mask & AES_TEST_FEATURE_OOP) {
+		obuf = rte_pktmbuf_alloc(mbuf_pool);
+		if (!obuf) {
+			snprintf(test_msg, AES_TEST_MSG_LEN, "line %u "
+				"FAILED: %s", __LINE__,
+				"Allocation of rte_mbuf failed");
+			status = TEST_FAILED;
+			goto error_exit;
+		}
+
+		buf_p = rte_pktmbuf_append(obuf, buf_len);
+		if (!buf_p) {
+			snprintf(test_msg, AES_TEST_MSG_LEN, "line %u "
+				"FAILED: %s", __LINE__,
+				"No room to append mbuf");
+			status = TEST_FAILED;
+			goto error_exit;
+		}
+		memset(buf_p, 0, buf_len);
+	}
+
+	/* Generate Crypto op data structure */
+	op = rte_crypto_op_alloc(op_mpool, RTE_CRYPTO_OP_TYPE_SYMMETRIC);
+	if (!op) {
+		snprintf(test_msg, AES_TEST_MSG_LEN, "line %u FAILED: %s",
+			__LINE__, "Failed to allocate symmetric crypto "
+			"operation struct");
+		status = TEST_FAILED;
+		goto error_exit;
+	}
+
+	sym_op = op->sym;
+
+	sym_op->m_src = ibuf;
+
+	if (t->feature_mask & AES_TEST_FEATURE_OOP) {
+		sym_op->m_dst = obuf;
+		iobuf = obuf;
+	} else {
+		sym_op->m_dst = NULL;
+		iobuf = ibuf;
+	}
+
+	/* sessionless op requires allocate xform using
+	 * rte_crypto_op_sym_xforms_alloc(), otherwise rte_zmalloc()
+	 * is used */
+	if (t->feature_mask & AES_TEST_FEATURE_SESSIONLESS) {
+		uint32_t n_xforms = 0;
+
+		if (t->op_mask & AES_TEST_OP_CIPHER)
+			n_xforms++;
+		if (t->op_mask & AES_TEST_OP_AUTH)
+			n_xforms++;
+
+		if (rte_crypto_op_sym_xforms_alloc(op, n_xforms)
+			== NULL) {
+			snprintf(test_msg, AES_TEST_MSG_LEN, "line %u "
+				"FAILED: %s", __LINE__, "Failed to "
+				"allocate space for crypto transforms");
+			status = TEST_FAILED;
+			goto error_exit;
+		}
+	} else {
+		cipher_xform = rte_zmalloc(NULL,
+			sizeof(struct rte_crypto_sym_xform), 0);
+
+		auth_xform = rte_zmalloc(NULL,
+			sizeof(struct rte_crypto_sym_xform), 0);
+
+		if (!cipher_xform || !auth_xform) {
+			snprintf(test_msg, AES_TEST_MSG_LEN, "line %u "
+				"FAILED: %s", __LINE__, "Failed to "
+				"allocate memory for crypto transforms");
+			status = TEST_FAILED;
+			goto error_exit;
+		}
+	}
+
+	/* preparing xform, for sessioned op, init_xform is initialized
+	 * here and later as param in rte_cryptodev_sym_session_create()
+	 * call */
+	if (t->op_mask == AES_TEST_OP_ENC_AUTH_GEN) {
+		if (t->feature_mask & AES_TEST_FEATURE_SESSIONLESS) {
+			cipher_xform = op->sym->xform;
+			auth_xform = cipher_xform->next;
+			auth_xform->next = NULL;
+		} else {
+			cipher_xform->next = auth_xform;
+			auth_xform->next = NULL;
+			init_xform = cipher_xform;
+		}
+	} else if (t->op_mask == AES_TEST_OP_AUTH_VERIFY_DEC) {
+		if (t->feature_mask & AES_TEST_FEATURE_SESSIONLESS) {
+			auth_xform = op->sym->xform;
+			cipher_xform = auth_xform->next;
+			cipher_xform->next = NULL;
+		} else {
+			auth_xform->next = cipher_xform;
+			cipher_xform->next = NULL;
+			init_xform = auth_xform;
+		}
+	} else if ((t->op_mask == AES_TEST_OP_ENCRYPT) ||
+			(t->op_mask == AES_TEST_OP_DECRYPT)) {
+		if (t->feature_mask & AES_TEST_FEATURE_SESSIONLESS)
+			cipher_xform = op->sym->xform;
+		else
+			init_xform = cipher_xform;
+		cipher_xform->next = NULL;
+	} else if ((t->op_mask == AES_TEST_OP_AUTH_GEN) ||
+			(t->op_mask == AES_TEST_OP_AUTH_VERIFY)) {
+		if (t->feature_mask & AES_TEST_FEATURE_SESSIONLESS)
+			auth_xform = op->sym->xform;
+		else
+			init_xform = auth_xform;
+		auth_xform->next = NULL;
+	} else {
+		snprintf(test_msg, AES_TEST_MSG_LEN, "line %u FAILED: %s",
+			__LINE__, "Unrecognized operation");
+		status = TEST_FAILED;
+		goto error_exit;
+	}
+
+	/*configure xforms & sym_op cipher and auth data*/
+	if (t->op_mask & AES_TEST_OP_CIPHER) {
+		cipher_xform->type = RTE_CRYPTO_SYM_XFORM_CIPHER;
+		cipher_xform->cipher.algo = tdata->crypto_algo;
+		if (t->op_mask & AES_TEST_OP_ENCRYPT)
+			cipher_xform->cipher.op =
+				RTE_CRYPTO_CIPHER_OP_ENCRYPT;
+		else
+			cipher_xform->cipher.op =
+				RTE_CRYPTO_CIPHER_OP_DECRYPT;
+		cipher_xform->cipher.key.data = cipher_key;
+		cipher_xform->cipher.key.length = tdata->cipher_key.len;
+
+		sym_op->cipher.data.offset = tdata->iv.len;
+		sym_op->cipher.data.length = tdata->ciphertext.len;
+		sym_op->cipher.iv.data = rte_pktmbuf_mtod(sym_op->m_src,
+			uint8_t *);
+		sym_op->cipher.iv.length = tdata->iv.len;
+		sym_op->cipher.iv.phys_addr = rte_pktmbuf_mtophys(
+			sym_op->m_src);
+	}
+
+	if (t->op_mask & AES_TEST_OP_AUTH) {
+		uint32_t auth_data_offset = 0;
+		uint32_t digest_offset = tdata->ciphertext.len;
+
+		if (t->op_mask & AES_TEST_OP_CIPHER) {
+			digest_offset += tdata->iv.len;
+			auth_data_offset += tdata->iv.len;
+		}
+
+		auth_xform->type = RTE_CRYPTO_SYM_XFORM_AUTH;
+		auth_xform->auth.algo = tdata->auth_algo;
+		auth_xform->auth.key.length = tdata->auth_key.len;
+		auth_xform->auth.key.data = auth_key;
+		auth_xform->auth.digest_length = digest_len;
+
+		if (t->op_mask & AES_TEST_OP_AUTH_GEN) {
+			auth_xform->auth.op = RTE_CRYPTO_AUTH_OP_GENERATE;
+			sym_op->auth.digest.data = rte_pktmbuf_mtod_offset
+				(iobuf, uint8_t *, digest_offset);
+			sym_op->auth.digest.phys_addr =
+				rte_pktmbuf_mtophys_offset(iobuf,
+					digest_offset);
+		} else {
+			auth_xform->auth.op = RTE_CRYPTO_AUTH_OP_VERIFY;
+			sym_op->auth.digest.data = rte_pktmbuf_mtod_offset
+				(sym_op->m_src, uint8_t *, digest_offset);
+			sym_op->auth.digest.phys_addr =
+				rte_pktmbuf_mtophys_offset(sym_op->m_src,
+					digest_offset);
+		}
+
+		sym_op->auth.data.offset = auth_data_offset;
+		sym_op->auth.data.length = tdata->ciphertext.len;
+		sym_op->auth.digest.length = digest_len;
+	}
+
+	/* create session for sessioned op */
+	if (!(t->feature_mask & AES_TEST_FEATURE_SESSIONLESS)) {
+		sess = rte_cryptodev_sym_session_create(dev_id,
+			init_xform);
+		if (!sess) {
+			snprintf(test_msg, AES_TEST_MSG_LEN, "line %u "
+				"FAILED: %s", __LINE__,
+				"Session creation failed");
+			status = TEST_FAILED;
+			goto error_exit;
+		}
+
+		/* attach symmetric crypto session to crypto operations */
+		rte_crypto_op_attach_sym_session(op, sess);
+	}
+
+	/* Process crypto operation */
+	if (rte_cryptodev_enqueue_burst(dev_id, 0, &op, 1) != 1) {
+		snprintf(test_msg, AES_TEST_MSG_LEN, "line %u FAILED: %s",
+			__LINE__, "Error sending packet for encryption");
+		status = TEST_FAILED;
+		goto error_exit;
+	}
+
+	op = NULL;
+
+	while (rte_cryptodev_dequeue_burst(dev_id, 0, &op, 1) == 0)
+		rte_pause();
+
+	if (!op) {
+		snprintf(test_msg, AES_TEST_MSG_LEN, "line %u FAILED: %s",
+			__LINE__, "Failed to process sym crypto op");
+		status = TEST_FAILED;
+		goto error_exit;
+	}
+
+#ifdef RTE_APP_TEST_DEBUG
+	rte_hexdump(stdout, "m_src:",
+		rte_pktmbuf_mtod(sym_op->m_src, uint8_t *), buf_len);
+	if (t->feature_mask & AES_TEST_FEATURE_OOP)
+		rte_hexdump(stdout, "m_dst:",
+			rte_pktmbuf_mtod(sym_op->m_dst, uint8_t *),
+			buf_len);
+#endif
+
+	/* Verify results */
+	if (op->status != RTE_CRYPTO_OP_STATUS_SUCCESS) {
+		if (t->op_mask & AES_TEST_OP_AUTH_VERIFY)
+			snprintf(test_msg, AES_TEST_MSG_LEN, "line %u "
+				"FAILED: Digest verification failed "
+				"(0x%X)", __LINE__, op->status);
+		else
+			snprintf(test_msg, AES_TEST_MSG_LEN, "line %u "
+				"FAILED: Digest verification failed "
+				"(0x%X)", __LINE__, op->status);
+		status = TEST_FAILED;
+		goto error_exit;
+	}
+
+	if (t->op_mask & AES_TEST_OP_CIPHER) {
+		uint8_t *crypto_res;
+		const uint8_t *compare_ref;
+		uint32_t compare_len;
+
+		crypto_res = rte_pktmbuf_mtod_offset(iobuf, uint8_t *,
+			tdata->iv.len);
+
+		if (t->op_mask & AES_TEST_OP_ENCRYPT) {
+			compare_ref = tdata->ciphertext.data;
+			compare_len = tdata->ciphertext.len;
+		} else {
+			compare_ref = tdata->plaintext.data;
+			compare_len = tdata->plaintext.len;
+		}
+
+		if (memcmp(crypto_res, compare_ref, compare_len)) {
+			snprintf(test_msg, AES_TEST_MSG_LEN, "line %u "
+				"FAILED: %s", __LINE__,
+				"Crypto data not as expected");
+			status = TEST_FAILED;
+			goto error_exit;
+		}
+	}
+
+	if (t->op_mask & AES_TEST_OP_AUTH_GEN) {
+		uint8_t *auth_res;
+
+		if (t->op_mask & AES_TEST_OP_CIPHER)
+			auth_res = rte_pktmbuf_mtod_offset(iobuf,
+				uint8_t *,
+				tdata->iv.len + tdata->ciphertext.len);
+		else
+			auth_res = rte_pktmbuf_mtod_offset(iobuf,
+				uint8_t *, tdata->ciphertext.len);
+
+		if (memcmp(auth_res, tdata->digest.data, digest_len)) {
+			snprintf(test_msg, AES_TEST_MSG_LEN, "line %u "
+				"FAILED: %s", __LINE__, "Generated "
+				"digest data not as expected");
+			status = TEST_FAILED;
+			goto error_exit;
+		}
+	}
+
+	snprintf(test_msg, AES_TEST_MSG_LEN, "PASS");
+
+error_exit:
+	if (!(t->feature_mask & AES_TEST_FEATURE_SESSIONLESS)) {
+		if (sess)
+			rte_cryptodev_sym_session_free(dev_id, sess);
+		if (cipher_xform)
+			rte_free(cipher_xform);
+		if (auth_xform)
+			rte_free(auth_xform);
+	}
+
+	if (op)
+		rte_crypto_op_free(op);
+
+	if (obuf)
+		rte_pktmbuf_free(obuf);
+
+	if (ibuf)
+		rte_pktmbuf_free(ibuf);
+
+	return status;
+}
+
+int
+test_AES_all_tests(struct rte_mempool *mbuf_pool,
+	struct rte_mempool *op_mpool,
+	uint8_t dev_id,
+	enum rte_cryptodev_type cryptodev_type)
+{
+	int status, overall_status = TEST_SUCCESS;
+	uint32_t i, test_index = 0;
+	char test_msg[AES_TEST_MSG_LEN + 1];
+	uint32_t n_test_cases = sizeof(aes_test_cases) /
+			sizeof(aes_test_cases[0]);
+	uint32_t target_pmd_mask = 0;
+
+	switch (cryptodev_type) {
+	case RTE_CRYPTODEV_AESNI_MB_PMD:
+		target_pmd_mask = AES_TEST_TARGET_PMD_MB;
+		break;
+	case RTE_CRYPTODEV_QAT_SYM_PMD:
+		target_pmd_mask = AES_TEST_TARGET_PMD_QAT;
+		break;
+	default:
+		TEST_ASSERT(-1, "Unrecognized cryptodev type");
+		break;
+	}
+
+	for (i = 0; i < n_test_cases; i++) {
+		const struct aes_test_case *tc = &aes_test_cases[i];
+
+		if (!(tc->pmd_mask & target_pmd_mask))
+			continue;
+
+		status = test_AES_one_case(tc, mbuf_pool, op_mpool,
+			dev_id, cryptodev_type, test_msg);
+
+		printf("  %u) TestCase %s %s\n", test_index ++,
+			tc->test_descr, test_msg);
+
+		if (status != TEST_SUCCESS) {
+			if (overall_status == TEST_SUCCESS)
+				overall_status = status;
+
+			if (tc->feature_mask & AES_TEST_FEATURE_STOPPER)
+				break;
+		}
+	}
+
+	return overall_status;
+}
diff --git a/app/test/test_cryptodev_aes.h b/app/test/test_cryptodev_aes.h
index 8fc6dd0..c3b439b 100755
--- a/app/test/test_cryptodev_aes.h
+++ b/app/test/test_cryptodev_aes.h
@@ -70,6 +70,12 @@ struct aes_test_data {
 	} digest;
 };
 
+int
+test_AES_all_tests(struct rte_mempool *mbuf_pool,
+	struct rte_mempool *op_mpool,
+	uint8_t dev_id,
+	enum rte_cryptodev_type cryptodev_type);
+
 /* test vectors */
 /* AES128-CTR-SHA1 test vector */
 static const struct aes_test_data aes_test_data_1 = {
-- 
2.5.5

  parent reply	other threads:[~2016-06-13 14:09 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-05-31  9:09 [PATCH 0/5] app/test: rework crypto AES unit test Fan Zhang
2016-05-31  9:09 ` [PATCH 1/5] app/test: categorize crypto AES test vectors into new file Fan Zhang
2016-05-31  9:09 ` [PATCH 2/5] app/test: add unified crypto aes test Fan Zhang
2016-06-07 20:00   ` Thomas Monjalon
2016-05-31  9:09 ` [PATCH 3/5] app/test: utilize new unified crypto AES test function Fan Zhang
2016-05-31  9:09 ` [PATCH 4/5] app/test: add crypto AES-CBC-128 HMAC-SHA224 and HMAC-SHA384 unit tests Fan Zhang
2016-05-31  9:09 ` [PATCH 5/5] examples/l2fwd-crypto: enable AES counter mode cipher algorithm Fan Zhang
2016-06-07 20:03 ` [PATCH 0/5] app/test: rework crypto AES unit test Thomas Monjalon
2016-06-08 15:38 ` [PATCH v2 0/4] " Fan Zhang
2016-06-08 15:38   ` [PATCH v2 1/4] app/test: categorize crypto AES test vectors into new file Fan Zhang
2016-06-08 15:38   ` [PATCH v2 2/4] app/test: add unified crypto aes test Fan Zhang
2016-06-08 15:38   ` [PATCH v2 3/4] app/test: utilize new unified crypto AES test function Fan Zhang
2016-06-08 15:38   ` [PATCH v2 4/4] app/test: add crypto AES-CBC-128 HMAC-SHA224 and HMAC-SHA384 unit tests Fan Zhang
2016-06-13 12:53   ` [PATCH v3 0/4] app/test: rework crypto AES unit test Fan Zhang
2016-06-13 12:53     ` [PATCH v3 1/4] app/test: categorize crypto AES test vectors into new file Fan Zhang
2016-06-13 12:53     ` [PATCH v3 2/4] app/test: add unified crypto aes test Fan Zhang
2016-06-13 12:53     ` [PATCH v3 3/4] app/test: utilize new unified crypto AES test function Fan Zhang
2016-06-13 12:53     ` [PATCH v3 4/4] app/test: add crypto AES-CBC-128 HMAC-SHA224 and HMAC-SHA384 unit tests Fan Zhang
2016-06-13 14:08     ` [PATCH v4 0/4] app/test: rework crypto AES unit test Fan Zhang
2016-06-13 14:08       ` [PATCH v4 1/4] app/test: categorize crypto AES test vectors into new file Fan Zhang
2016-06-13 14:08       ` Fan Zhang [this message]
2016-06-13 14:08       ` [PATCH v4 3/4] app/test: utilize new unified crypto AES test function Fan Zhang
2016-06-13 14:08       ` [PATCH v4 4/4] app/test: add crypto AES-CBC-128 HMAC-SHA224 and HMAC-SHA384 unit tests Fan Zhang
2016-06-13 20:26       ` [PATCH v4 0/4] app/test: rework crypto AES unit test Thomas Monjalon
2016-06-14  9:57       ` [PATCH v5 0/2] " Fan Zhang
2016-06-14  9:57         ` [PATCH v5 1/2] app/test: reworks the " Fan Zhang
2016-06-15 10:41           ` De Lara Guarch, Pablo
2016-06-21  2:57             ` Chen, Zhaoyan
2016-06-14  9:57         ` [PATCH v5 2/2] app/test: add crypto AES-CBC-128 HMAC-SHA224 and HMAC-SHA384 unit tests Fan Zhang
2016-06-15 11:02         ` [PATCH v6 0/2] rework crypto AES unit test Fan Zhang
2016-06-15 11:02           ` [PATCH v6 1/2] app/test: rework the " Fan Zhang
2016-06-15 11:02           ` [PATCH v6 2/2] app/test: add crypto AES-CBC-128 HMAC-SHA224 and HMAC-SHA384 unit tests Fan Zhang
2016-06-15 12:50           ` [PATCH v6 0/2] rework crypto AES unit test De Lara Guarch, Pablo
2016-06-20 15:18             ` Thomas Monjalon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1465826893-20392-3-git-send-email-roy.fan.zhang@intel.com \
    --to=roy.fan.zhang@intel.com \
    --cc=declan.doherty@intel.com \
    --cc=dev@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.