All of lore.kernel.org
 help / color / mirror / Atom feed
From: Kevin Wolf <kwolf@redhat.com>
To: qemu-block@nongnu.org
Cc: kwolf@redhat.com, qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 03/39] qcow2: Make copy_sectors() byte based
Date: Thu, 16 Jun 2016 16:07:52 +0200	[thread overview]
Message-ID: <1466086108-24868-4-git-send-email-kwolf@redhat.com> (raw)
In-Reply-To: <1466086108-24868-1-git-send-email-kwolf@redhat.com>

This will allow copy on write operations where the overwritten part of
the cluster is not aligned to sector boundaries.

Also rename the function because it has nothing to do with sectors any
more.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
---
 block/qcow2-cluster.c | 55 +++++++++++++++++++++++++--------------------------
 1 file changed, 27 insertions(+), 28 deletions(-)

diff --git a/block/qcow2-cluster.c b/block/qcow2-cluster.c
index 277764f..b7671fc 100644
--- a/block/qcow2-cluster.c
+++ b/block/qcow2-cluster.c
@@ -390,22 +390,18 @@ int qcow2_encrypt_sectors(BDRVQcow2State *s, int64_t sector_num,
     return 0;
 }
 
-static int coroutine_fn copy_sectors(BlockDriverState *bs,
-                                     uint64_t start_sect,
-                                     uint64_t cluster_offset,
-                                     int n_start, int n_end)
+static int coroutine_fn do_perform_cow(BlockDriverState *bs,
+                                       uint64_t src_cluster_offset,
+                                       uint64_t cluster_offset,
+                                       int offset_in_cluster,
+                                       int bytes)
 {
     BDRVQcow2State *s = bs->opaque;
     QEMUIOVector qiov;
     struct iovec iov;
-    int n, ret;
-
-    n = n_end - n_start;
-    if (n <= 0) {
-        return 0;
-    }
+    int ret;
 
-    iov.iov_len = n * BDRV_SECTOR_SIZE;
+    iov.iov_len = bytes;
     iov.iov_base = qemu_try_blockalign(bs, iov.iov_len);
     if (iov.iov_base == NULL) {
         return -ENOMEM;
@@ -424,18 +420,21 @@ static int coroutine_fn copy_sectors(BlockDriverState *bs,
      * interface.  This avoids double I/O throttling and request tracking,
      * which can lead to deadlock when block layer copy-on-read is enabled.
      */
-    ret = bs->drv->bdrv_co_preadv(bs, (start_sect + n_start) * BDRV_SECTOR_SIZE,
-                                  n * BDRV_SECTOR_SIZE, &qiov, 0);
+    ret = bs->drv->bdrv_co_preadv(bs, src_cluster_offset + offset_in_cluster,
+                                  bytes, &qiov, 0);
     if (ret < 0) {
         goto out;
     }
 
     if (bs->encrypted) {
         Error *err = NULL;
+        int64_t sector = (cluster_offset + offset_in_cluster)
+                         >> BDRV_SECTOR_BITS;
         assert(s->cipher);
-        if (qcow2_encrypt_sectors(s, start_sect + n_start,
-                                  iov.iov_base, iov.iov_base, n,
-                                  true, &err) < 0) {
+        assert((offset_in_cluster & ~BDRV_SECTOR_MASK) == 0);
+        assert((bytes & ~BDRV_SECTOR_MASK) == 0);
+        if (qcow2_encrypt_sectors(s, sector, iov.iov_base, iov.iov_base,
+                                  bytes >> BDRV_SECTOR_BITS, true, &err) < 0) {
             ret = -EIO;
             error_free(err);
             goto out;
@@ -443,14 +442,14 @@ static int coroutine_fn copy_sectors(BlockDriverState *bs,
     }
 
     ret = qcow2_pre_write_overlap_check(bs, 0,
-            cluster_offset + n_start * BDRV_SECTOR_SIZE, n * BDRV_SECTOR_SIZE);
+            cluster_offset + offset_in_cluster, bytes);
     if (ret < 0) {
         goto out;
     }
 
     BLKDBG_EVENT(bs->file, BLKDBG_COW_WRITE);
-    ret = bdrv_co_writev(bs->file->bs, (cluster_offset >> 9) + n_start, n,
-                         &qiov);
+    ret = bdrv_co_pwritev(bs->file->bs, cluster_offset + offset_in_cluster,
+                          bytes, &qiov, 0);
     if (ret < 0) {
         goto out;
     }
@@ -745,9 +744,8 @@ static int perform_cow(BlockDriverState *bs, QCowL2Meta *m, Qcow2COWRegion *r)
     }
 
     qemu_co_mutex_unlock(&s->lock);
-    ret = copy_sectors(bs, m->offset / BDRV_SECTOR_SIZE, m->alloc_offset,
-                       r->offset / BDRV_SECTOR_SIZE,
-                       r->offset / BDRV_SECTOR_SIZE + r->nb_sectors);
+    ret = do_perform_cow(bs, m->offset, m->alloc_offset,
+                         r->offset, r->nb_sectors * BDRV_SECTOR_SIZE);
     qemu_co_mutex_lock(&s->lock);
 
     if (ret < 0) {
@@ -809,13 +807,14 @@ int qcow2_alloc_cluster_link_l2(BlockDriverState *bs, QCowL2Meta *m)
     assert(l2_index + m->nb_clusters <= s->l2_size);
     for (i = 0; i < m->nb_clusters; i++) {
         /* if two concurrent writes happen to the same unallocated cluster
-	 * each write allocates separate cluster and writes data concurrently.
-	 * The first one to complete updates l2 table with pointer to its
-	 * cluster the second one has to do RMW (which is done above by
-	 * copy_sectors()), update l2 table with its cluster pointer and free
-	 * old cluster. This is what this loop does */
-        if(l2_table[l2_index + i] != 0)
+         * each write allocates separate cluster and writes data concurrently.
+         * The first one to complete updates l2 table with pointer to its
+         * cluster the second one has to do RMW (which is done above by
+         * perform_cow()), update l2 table with its cluster pointer and free
+         * old cluster. This is what this loop does */
+        if (l2_table[l2_index + i] != 0) {
             old_cluster[j++] = l2_table[l2_index + i];
+        }
 
         l2_table[l2_index + i] = cpu_to_be64((cluster_offset +
                     (i << s->cluster_bits)) | QCOW_OFLAG_COPIED);
-- 
1.8.3.1

  parent reply	other threads:[~2016-06-16 14:09 UTC|newest]

Thread overview: 43+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-06-16 14:07 [Qemu-devel] [PULL 00/39] Block layer patches Kevin Wolf
2016-06-16 14:07 ` [Qemu-devel] [PULL 01/39] qcow2: Work with bytes in qcow2_get_cluster_offset() Kevin Wolf
2016-06-16 14:07 ` [Qemu-devel] [PULL 02/39] qcow2: Implement .bdrv_co_preadv() Kevin Wolf
2016-06-16 14:07 ` Kevin Wolf [this message]
2016-06-16 14:07 ` [Qemu-devel] [PULL 04/39] qcow2: Use bytes instead of sectors for QCowL2Meta Kevin Wolf
2016-06-16 14:07 ` [Qemu-devel] [PULL 05/39] qcow2: Implement .bdrv_co_pwritev() Kevin Wolf
2016-06-16 14:07 ` [Qemu-devel] [PULL 06/39] blockdev: clarify error on attempt to open locked tray Kevin Wolf
2016-06-16 14:07 ` [Qemu-devel] [PULL 07/39] hmp: acquire aio_context in hmp_qemu_io Kevin Wolf
2016-06-16 14:07 ` [Qemu-devel] [PULL 08/39] m25p80: fix test on blk_pread() return value Kevin Wolf
2016-06-16 14:07 ` [Qemu-devel] [PULL 09/39] qemu-img bench: Fix uninitialised writethrough mode Kevin Wolf
2016-06-16 14:07 ` [Qemu-devel] [PULL 10/39] block: Avoid bogus flags during mirroring Kevin Wolf
2016-06-16 14:08 ` [Qemu-devel] [PULL 11/39] block: Assert that flags are in range Kevin Wolf
2016-06-16 14:08 ` [Qemu-devel] [PULL 12/39] block: drop support for using qcow[2] encryption with system emulators Kevin Wolf
2016-06-16 14:08 ` [Qemu-devel] [PULL 13/39] block: Byte-based bdrv_co_do_copy_on_readv() Kevin Wolf
2016-06-16 14:08 ` [Qemu-devel] [PULL 14/39] block: Prepare bdrv_aligned_preadv() for byte-aligned requests Kevin Wolf
2016-06-16 14:08 ` [Qemu-devel] [PULL 15/39] block: Prepare bdrv_aligned_pwritev() " Kevin Wolf
2016-06-16 14:08 ` [Qemu-devel] [PULL 16/39] raw-posix: Switch to bdrv_co_* interfaces Kevin Wolf
2016-06-16 14:08 ` [Qemu-devel] [PULL 17/39] raw-posix: Implement .bdrv_co_preadv/pwritev Kevin Wolf
2016-06-16 14:08 ` [Qemu-devel] [PULL 18/39] block: Don't enforce 512 byte minimum alignment Kevin Wolf
2016-06-16 14:08 ` [Qemu-devel] [PULL 19/39] linux-aio: Cancel BH if not needed Kevin Wolf
2016-06-16 14:08 ` [Qemu-devel] [PULL 20/39] doc: Fix mailing list address in tests/qemu-iotests/README Kevin Wolf
2016-06-16 14:08 ` [Qemu-devel] [PULL 21/39] block: Introduce bdrv_preadv() Kevin Wolf
2016-06-16 14:08 ` [Qemu-devel] [PULL 22/39] block: Make .bdrv_load_vmstate() vectored Kevin Wolf
2016-06-16 14:08 ` [Qemu-devel] [PULL 23/39] block: Allow .bdrv_load/save_vmstate() to return 0/-errno Kevin Wolf
2016-06-16 14:08 ` [Qemu-devel] [PULL 24/39] block: Make bdrv_load/save_vmstate coroutine_fns Kevin Wolf
2016-06-16 14:08 ` [Qemu-devel] [PULL 25/39] qcow2: Let vmstate call qcow2_co_preadv/pwrite directly Kevin Wolf
2016-06-16 14:08 ` [Qemu-devel] [PULL 26/39] block: Remove bs->zero_beyond_eof Kevin Wolf
2016-06-16 14:08 ` [Qemu-devel] [PULL 27/39] block: Fix snapshot=on with aio=native Kevin Wolf
2016-06-16 14:08 ` [Qemu-devel] [PULL 28/39] block: use the block job list in bdrv_drain_all() Kevin Wolf
2016-06-16 14:08 ` [Qemu-devel] [PULL 29/39] block: use the block job list in qmp_query_block_jobs() Kevin Wolf
2016-06-16 14:08 ` [Qemu-devel] [PULL 30/39] block: Prevent sleeping jobs from resuming if they have been paused Kevin Wolf
2016-06-16 14:08 ` [Qemu-devel] [PULL 31/39] block: Create the commit block job before reopening any image Kevin Wolf
2016-06-16 14:08 ` [Qemu-devel] [PULL 32/39] iotests: 095: Clean up QEMU before showing image info Kevin Wolf
2016-06-16 14:08 ` [Qemu-devel] [PULL 33/39] rbd:change error_setg() to error_setg_errno() Kevin Wolf
2016-06-16 14:08 ` [Qemu-devel] [PULL 34/39] block: Allow replacement of a BDS by its overlay Kevin Wolf
2016-06-16 14:08 ` [Qemu-devel] [PULL 35/39] block/mirror: Fix target backing BDS Kevin Wolf
2016-06-16 14:08 ` [Qemu-devel] [PULL 36/39] block/null: Implement bdrv_refresh_filename() Kevin Wolf
2016-06-16 14:08 ` [Qemu-devel] [PULL 37/39] iotests: Add test for post-mirror backing chains Kevin Wolf
2016-06-16 14:08 ` [Qemu-devel] [PULL 38/39] iotests: Add test for oVirt-like storage migration Kevin Wolf
2016-06-16 14:08 ` [Qemu-devel] [PULL 39/39] hbitmap: add 'pos < size' asserts Kevin Wolf
2016-06-16 15:06 ` [Qemu-devel] [PULL 00/39] Block layer patches Peter Maydell
2016-06-16 17:04   ` Eric Blake
2016-06-16 17:08     ` Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1466086108-24868-4-git-send-email-kwolf@redhat.com \
    --to=kwolf@redhat.com \
    --cc=qemu-block@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.