From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932256AbcFPVdE (ORCPT ); Thu, 16 Jun 2016 17:33:04 -0400 Received: from mail-wm0-f51.google.com ([74.125.82.51]:38500 "EHLO mail-wm0-f51.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755335AbcFPV3T (ORCPT ); Thu, 16 Jun 2016 17:29:19 -0400 From: Daniel Lezcano To: daniel.lezcano@linaro.org, tglx@linutronix.de Cc: linux-kernel@vger.kernel.org Subject: [PATCH V2 52/63] clocksource/drivers/vf_pit_timer: Convert init function to return error Date: Thu, 16 Jun 2016 23:27:11 +0200 Message-Id: <1466112442-31105-53-git-send-email-daniel.lezcano@linaro.org> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1466112442-31105-1-git-send-email-daniel.lezcano@linaro.org> References: <1466112442-31105-1-git-send-email-daniel.lezcano@linaro.org> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org The init functions do not return any error. They behave as the following: - panic, thus leading to a kernel crash while another timer may work and make the system boot up correctly or - print an error and let the caller unaware if the state of the system Change that by converting the init functions to return an error conforming to the CLOCKSOURCE_OF_RET prototype. Proper error handling (rollback, errno value) will be changed later case by case, thus this change just return back an error or success in the init function. Signed-off-by: Daniel Lezcano --- drivers/clocksource/vf_pit_timer.c | 27 ++++++++++++++++++--------- 1 file changed, 18 insertions(+), 9 deletions(-) diff --git a/drivers/clocksource/vf_pit_timer.c b/drivers/clocksource/vf_pit_timer.c index a0e6c68..ca4dff4 100644 --- a/drivers/clocksource/vf_pit_timer.c +++ b/drivers/clocksource/vf_pit_timer.c @@ -156,15 +156,18 @@ static int __init pit_clockevent_init(unsigned long rate, int irq) return 0; } -static void __init pit_timer_init(struct device_node *np) +static int __init pit_timer_init(struct device_node *np) { struct clk *pit_clk; void __iomem *timer_base; unsigned long clk_rate; - int irq; + int irq, ret; timer_base = of_iomap(np, 0); - BUG_ON(!timer_base); + if (!timer_base) { + pr_err("Failed to iomap"); + return -ENXIO; + } /* * PIT0 and PIT1 can be chained to build a 64-bit timer, @@ -175,12 +178,16 @@ static void __init pit_timer_init(struct device_node *np) clkevt_base = timer_base + PITn_OFFSET(3); irq = irq_of_parse_and_map(np, 0); - BUG_ON(irq <= 0); + if (irq <= 0) + return -EINVAL; pit_clk = of_clk_get(np, 0); - BUG_ON(IS_ERR(pit_clk)); + if (IS_ERR(pit_clk)) + return PTR_ERR(pit_clk); - BUG_ON(clk_prepare_enable(pit_clk)); + ret = clk_prepare_enable(pit_clk); + if (ret) + return ret; clk_rate = clk_get_rate(pit_clk); cycle_per_jiffy = clk_rate / (HZ); @@ -188,8 +195,10 @@ static void __init pit_timer_init(struct device_node *np) /* enable the pit module */ __raw_writel(~PITMCR_MDIS, timer_base + PITMCR); - BUG_ON(pit_clocksource_init(clk_rate)); + ret = pit_clocksource_init(clk_rate); + if (ret) + return ret; - pit_clockevent_init(clk_rate, irq); + return pit_clockevent_init(clk_rate, irq); } -CLOCKSOURCE_OF_DECLARE(vf610, "fsl,vf610-pit", pit_timer_init); +CLOCKSOURCE_OF_DECLARE_RET(vf610, "fsl,vf610-pit", pit_timer_init); -- 1.9.1