All of lore.kernel.org
 help / color / mirror / Atom feed
From: Thomas Pedersen <twp@codeaurora.org>
To: linux-watchdog@vger.kernel.org
Cc: Matthew McClintock <mmcclint@codeaurora.org>,
	Wim Van Sebroeck <wim@iguana.be>,
	Guenter Roeck <linux@roeck-us.net>
Subject: [PATCH 2/3] watchdog: qcom: add option for standalone watchdog not in timer block
Date: Mon, 27 Jun 2016 16:26:49 -0700	[thread overview]
Message-ID: <1467070010-16965-3-git-send-email-twp@codeaurora.org> (raw)
In-Reply-To: <1467070010-16965-1-git-send-email-twp@codeaurora.org>

From: Matthew McClintock <mmcclint@codeaurora.org>

Commit 0dfd582e026a ("watchdog: qcom: use timer devicetree binding") moved
to use the watchdog as a subset timer register block. Some devices have the
watchdog completely standalone with slightly different register offsets as
well so let's account for the differences here.

Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org>
---
 drivers/watchdog/qcom-wdt.c | 73 ++++++++++++++++++++++++++++++++-------------
 1 file changed, 52 insertions(+), 21 deletions(-)

diff --git a/drivers/watchdog/qcom-wdt.c b/drivers/watchdog/qcom-wdt.c
index a043fa4..70e42ed 100644
--- a/drivers/watchdog/qcom-wdt.c
+++ b/drivers/watchdog/qcom-wdt.c
@@ -19,18 +19,40 @@
 #include <linux/platform_device.h>
 #include <linux/watchdog.h>
 
-#define WDT_RST		0x38
-#define WDT_EN		0x40
-#define WDT_STS		0x44
-#define WDT_BITE_TIME	0x5C
+enum wdt_reg {
+	WDT_RST,
+	WDT_EN,
+	WDT_STS,
+	WDT_BITE_TIME,
+};
+
+static const u32 reg_offset_data_apcs_tmr[] = {
+	[WDT_RST] = 0x38,
+	[WDT_EN] = 0x40,
+	[WDT_STS] = 0x44,
+	[WDT_BITE_TIME] = 0x5C,
+};
+
+static const u32 reg_offset_data_kpss[] = {
+	[WDT_RST] = 0x4,
+	[WDT_EN] = 0x8,
+	[WDT_STS] = 0xC,
+	[WDT_BITE_TIME] = 0x14,
+};
 
 struct qcom_wdt {
 	struct watchdog_device	wdd;
 	struct clk		*clk;
 	unsigned long		rate;
 	void __iomem		*base;
+	const u32		*layout;
 };
 
+static void __iomem *wdt_addr(struct qcom_wdt *wdt, enum wdt_reg reg)
+{
+	return wdt->base + wdt->layout[reg];
+}
+
 static inline
 struct qcom_wdt *to_qcom_wdt(struct watchdog_device *wdd)
 {
@@ -41,10 +63,10 @@ static int qcom_wdt_start(struct watchdog_device *wdd)
 {
 	struct qcom_wdt *wdt = to_qcom_wdt(wdd);
 
-	writel(0, wdt->base + WDT_EN);
-	writel(1, wdt->base + WDT_RST);
-	writel(wdd->timeout * wdt->rate, wdt->base + WDT_BITE_TIME);
-	writel(1, wdt->base + WDT_EN);
+	writel(0, wdt_addr(wdt, WDT_EN));
+	writel(1, wdt_addr(wdt, WDT_RST));
+	writel(wdd->timeout * wdt->rate, wdt_addr(wdt, WDT_BITE_TIME));
+	writel(1, wdt_addr(wdt, WDT_EN));
 	return 0;
 }
 
@@ -52,7 +74,7 @@ static int qcom_wdt_stop(struct watchdog_device *wdd)
 {
 	struct qcom_wdt *wdt = to_qcom_wdt(wdd);
 
-	writel(0, wdt->base + WDT_EN);
+	writel(0, wdt_addr(wdt, WDT_EN));
 	return 0;
 }
 
@@ -60,7 +82,7 @@ static int qcom_wdt_ping(struct watchdog_device *wdd)
 {
 	struct qcom_wdt *wdt = to_qcom_wdt(wdd);
 
-	writel(1, wdt->base + WDT_RST);
+	writel(1, wdt_addr(wdt, WDT_RST));
 	return 0;
 }
 
@@ -83,10 +105,10 @@ static int qcom_wdt_restart(struct watchdog_device *wdd, unsigned long action,
 	 */
 	timeout = 128 * wdt->rate / 1000;
 
-	writel(0, wdt->base + WDT_EN);
-	writel(1, wdt->base + WDT_RST);
-	writel(timeout, wdt->base + WDT_BITE_TIME);
-	writel(1, wdt->base + WDT_EN);
+	writel(0, wdt_addr(wdt, WDT_EN));
+	writel(1, wdt_addr(wdt, WDT_RST));
+	writel(timeout, wdt_addr(wdt, WDT_BITE_TIME));
+	writel(1, wdt_addr(wdt, WDT_EN));
 
 	/*
 	 * Actually make sure the above sequence hits hardware before sleeping.
@@ -114,14 +136,29 @@ static const struct watchdog_info qcom_wdt_info = {
 	.identity	= KBUILD_MODNAME,
 };
 
+static const struct of_device_id qcom_wdt_of_table[] = {
+	{ .compatible = "qcom,kpss-timer", .data = reg_offset_data_apcs_tmr },
+	{ .compatible = "qcom,scss-timer", .data = reg_offset_data_apcs_tmr },
+	{ .compatible = "qcom,kpss-standalone", .data = &reg_offset_data_kpss},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, qcom_wdt_of_table);
+
 static int qcom_wdt_probe(struct platform_device *pdev)
 {
 	struct qcom_wdt *wdt;
 	struct resource *res;
 	struct device_node *np = pdev->dev.of_node;
+	const struct of_device_id *match;
 	u32 percpu_offset;
 	int ret;
 
+	match = of_match_node(qcom_wdt_of_table, np);
+	if (!match) {
+		dev_err(&pdev->dev, "Unsupported QCOM WDT module\n");
+		return -ENODEV;
+	}
+
 	wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL);
 	if (!wdt)
 		return -ENOMEM;
@@ -172,6 +209,7 @@ static int qcom_wdt_probe(struct platform_device *pdev)
 	wdt->wdd.min_timeout = 1;
 	wdt->wdd.max_timeout = 0x10000000U / wdt->rate;
 	wdt->wdd.parent = &pdev->dev;
+	wdt->layout = match->data;
 
 	if (readl(wdt->base + WDT_STS) & 1)
 		wdt->wdd.bootstatus = WDIOF_CARDRESET;
@@ -207,13 +245,6 @@ static int qcom_wdt_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static const struct of_device_id qcom_wdt_of_table[] = {
-	{ .compatible = "qcom,kpss-timer" },
-	{ .compatible = "qcom,scss-timer" },
-	{ },
-};
-MODULE_DEVICE_TABLE(of, qcom_wdt_of_table);
-
 static struct platform_driver qcom_watchdog_driver = {
 	.probe	= qcom_wdt_probe,
 	.remove	= qcom_wdt_remove,
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


  parent reply	other threads:[~2016-06-27 23:26 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-06-27 23:26 [PATCH 0/3] qcom watchdog fixes Thomas Pedersen
2016-06-27 23:26 ` [PATCH 1/3] watchdog: qcom: update device tree bindings Thomas Pedersen
2016-06-28  5:20   ` Guenter Roeck
2016-06-28 17:17     ` Thomas Pedersen
2016-06-28 17:24       ` Mark Rutland
2016-06-28 17:34         ` Thomas Pedersen
2016-06-27 23:26 ` Thomas Pedersen [this message]
2016-06-28  5:23   ` [PATCH 2/3] watchdog: qcom: add option for standalone watchdog not in timer block Guenter Roeck
2016-06-27 23:26 ` [PATCH 3/3] watchdog: qcom: configure BARK time in addition to BITE time Thomas Pedersen
2016-06-28  5:26   ` Guenter Roeck
2016-06-28  5:31 ` [PATCH 0/3] qcom watchdog fixes Guenter Roeck
2016-06-28 17:04   ` Thomas Pedersen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1467070010-16965-3-git-send-email-twp@codeaurora.org \
    --to=twp@codeaurora.org \
    --cc=linux-watchdog@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=mmcclint@codeaurora.org \
    --cc=wim@iguana.be \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.