All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH v2 0/2] serial: 8250_dw: Add ACPI support for uart on Hisilicon Hip05 soc
@ 2016-06-30  1:27 ` Kefeng Wang
  0 siblings, 0 replies; 13+ messages in thread
From: Kefeng Wang @ 2016-06-30  1:27 UTC (permalink / raw)
  To: Greg Kroah-Hartman
  Cc: Jiri Slaby, linux-serial, linux-kernel, Andy Shevchenko,
	z.liuxinliang, guohanjun, linux-acpi, xuwei5, graeme.gregory,
	Kefeng Wang

Make dw8250_set_termios() as the default set_termios callback for 8250 dw uart, correct me
if I am wrong.

Then add ACPI support for uart on Hisilicon Hip05 soc, be careful that it is not 16500
compatible. Meanwhile, set dw8250_serial_out32 to keep consistent between serial_out
and serial_in in ACPI.

Change since v1:
- Use acpi_match_device() instead of acpi_dev_found(), limit the check to the device
  being probed and not a global search for whole DSDT (pointed by graeme.gregory@linaro.org)

Kefeng Wang (2):
  serial: 8250_dw: make dw8250_set_termios as default set_termios
    callback
  serial: 8250_dw: add ACPI support for uart on Hisilicon Hip05 soc

 drivers/tty/serial/8250/8250_dw.c | 16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

-- 
1.7.12.4

^ permalink raw reply	[flat|nested] 13+ messages in thread

* [PATCH v2 0/2] serial: 8250_dw: Add ACPI support for uart on Hisilicon Hip05 soc
@ 2016-06-30  1:27 ` Kefeng Wang
  0 siblings, 0 replies; 13+ messages in thread
From: Kefeng Wang @ 2016-06-30  1:27 UTC (permalink / raw)
  To: Greg Kroah-Hartman
  Cc: Jiri Slaby, linux-serial, linux-kernel, Andy Shevchenko,
	z.liuxinliang, guohanjun, linux-acpi, xuwei5, graeme.gregory,
	Kefeng Wang

Make dw8250_set_termios() as the default set_termios callback for 8250 dw uart, correct me
if I am wrong.

Then add ACPI support for uart on Hisilicon Hip05 soc, be careful that it is not 16500
compatible. Meanwhile, set dw8250_serial_out32 to keep consistent between serial_out
and serial_in in ACPI.

Change since v1:
- Use acpi_match_device() instead of acpi_dev_found(), limit the check to the device
  being probed and not a global search for whole DSDT (pointed by graeme.gregory@linaro.org)

Kefeng Wang (2):
  serial: 8250_dw: make dw8250_set_termios as default set_termios
    callback
  serial: 8250_dw: add ACPI support for uart on Hisilicon Hip05 soc

 drivers/tty/serial/8250/8250_dw.c | 16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

-- 
1.7.12.4

^ permalink raw reply	[flat|nested] 13+ messages in thread

* [PATCH v2 1/2] serial: 8250_dw: make dw8250_set_termios as default set_termios callback
  2016-06-30  1:27 ` Kefeng Wang
@ 2016-06-30  1:27   ` Kefeng Wang
  -1 siblings, 0 replies; 13+ messages in thread
From: Kefeng Wang @ 2016-06-30  1:27 UTC (permalink / raw)
  To: Greg Kroah-Hartman
  Cc: Jiri Slaby, linux-serial, linux-kernel, Andy Shevchenko,
	z.liuxinliang, guohanjun, linux-acpi, xuwei5, graeme.gregory,
	Kefeng Wang

We can safely use dw8250_set_termios() as the default set_termios
callback instead of serial8250_do_set_termios(), so do it.

Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
---
 drivers/tty/serial/8250/8250_dw.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index e199696..65f3da7 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -301,7 +301,6 @@ static void dw8250_quirks(struct uart_port *p, struct dw8250_data *data)
 		p->iotype = UPIO_MEM32;
 		p->regshift = 2;
 		p->serial_in = dw8250_serial_in32;
-		p->set_termios = dw8250_set_termios;
 		/* So far none of there implement the Busy Functionality */
 		data->uart_16550_compatible = true;
 	}
@@ -309,7 +308,6 @@ static void dw8250_quirks(struct uart_port *p, struct dw8250_data *data)
 	/* Platforms with iDMA */
 	if (platform_get_resource_byname(to_platform_device(p->dev),
 					 IORESOURCE_MEM, "lpss_priv")) {
-		p->set_termios = dw8250_set_termios;
 		data->dma.rx_param = p->dev->parent;
 		data->dma.tx_param = p->dev->parent;
 		data->dma.fn = dw8250_idma_filter;
@@ -386,6 +384,7 @@ static int dw8250_probe(struct platform_device *pdev)
 	p->iotype	= UPIO_MEM;
 	p->serial_in	= dw8250_serial_in;
 	p->serial_out	= dw8250_serial_out;
+	p->set_termios	= dw8250_set_termios;
 
 	p->membase = devm_ioremap(&pdev->dev, regs->start, resource_size(regs));
 	if (!p->membase)
-- 
1.7.12.4

^ permalink raw reply	[flat|nested] 13+ messages in thread

* [PATCH v2 1/2] serial: 8250_dw: make dw8250_set_termios as default set_termios callback
@ 2016-06-30  1:27   ` Kefeng Wang
  0 siblings, 0 replies; 13+ messages in thread
From: Kefeng Wang @ 2016-06-30  1:27 UTC (permalink / raw)
  To: Greg Kroah-Hartman
  Cc: Jiri Slaby, linux-serial, linux-kernel, Andy Shevchenko,
	z.liuxinliang, guohanjun, linux-acpi, xuwei5, graeme.gregory,
	Kefeng Wang

We can safely use dw8250_set_termios() as the default set_termios
callback instead of serial8250_do_set_termios(), so do it.

Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
---
 drivers/tty/serial/8250/8250_dw.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index e199696..65f3da7 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -301,7 +301,6 @@ static void dw8250_quirks(struct uart_port *p, struct dw8250_data *data)
 		p->iotype = UPIO_MEM32;
 		p->regshift = 2;
 		p->serial_in = dw8250_serial_in32;
-		p->set_termios = dw8250_set_termios;
 		/* So far none of there implement the Busy Functionality */
 		data->uart_16550_compatible = true;
 	}
@@ -309,7 +308,6 @@ static void dw8250_quirks(struct uart_port *p, struct dw8250_data *data)
 	/* Platforms with iDMA */
 	if (platform_get_resource_byname(to_platform_device(p->dev),
 					 IORESOURCE_MEM, "lpss_priv")) {
-		p->set_termios = dw8250_set_termios;
 		data->dma.rx_param = p->dev->parent;
 		data->dma.tx_param = p->dev->parent;
 		data->dma.fn = dw8250_idma_filter;
@@ -386,6 +384,7 @@ static int dw8250_probe(struct platform_device *pdev)
 	p->iotype	= UPIO_MEM;
 	p->serial_in	= dw8250_serial_in;
 	p->serial_out	= dw8250_serial_out;
+	p->set_termios	= dw8250_set_termios;
 
 	p->membase = devm_ioremap(&pdev->dev, regs->start, resource_size(regs));
 	if (!p->membase)
-- 
1.7.12.4

^ permalink raw reply	[flat|nested] 13+ messages in thread

* [PATCH v2 2/2] serial: 8250_dw: add ACPI support for uart on Hisilicon Hip05 soc
  2016-06-30  1:27 ` Kefeng Wang
@ 2016-06-30  1:27   ` Kefeng Wang
  -1 siblings, 0 replies; 13+ messages in thread
From: Kefeng Wang @ 2016-06-30  1:27 UTC (permalink / raw)
  To: Greg Kroah-Hartman
  Cc: Jiri Slaby, linux-serial, linux-kernel, Andy Shevchenko,
	z.liuxinliang, guohanjun, linux-acpi, xuwei5, graeme.gregory,
	Kefeng Wang

Add ACPI identifier for UART on Hisilicon Hip05 soc, be careful
that it is not 16550 compatibal.

Meanwhile, set dw8250_serial_out32 to keep consistent between serial_out
and serial_in in ACPI.

Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
---
 drivers/tty/serial/8250/8250_dw.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index 65f3da7..096431b 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -272,6 +272,12 @@ static bool dw8250_idma_filter(struct dma_chan *chan, void *param)
 	return param == chan->device->dev->parent;
 }
 
+/* non 16550 compatible id list*/
+static const struct acpi_device_id non_16550_id_list[] = {
+	{ "HISI0031", 0 },
+	{ },
+};
+
 static void dw8250_quirks(struct uart_port *p, struct dw8250_data *data)
 {
 	if (p->dev->of_node) {
@@ -301,8 +307,10 @@ static void dw8250_quirks(struct uart_port *p, struct dw8250_data *data)
 		p->iotype = UPIO_MEM32;
 		p->regshift = 2;
 		p->serial_in = dw8250_serial_in32;
-		/* So far none of there implement the Busy Functionality */
-		data->uart_16550_compatible = true;
+		p->serial_out = dw8250_serial_out32;
+
+		if (!acpi_match_device(non_16550_id_list, p->dev))
+			data->uart_16550_compatible = true;
 	}
 
 	/* Platforms with iDMA */
@@ -618,6 +626,7 @@ static const struct acpi_device_id dw8250_acpi_match[] = {
 	{ "APMC0D08", 0},
 	{ "AMD0020", 0 },
 	{ "AMDI0020", 0 },
+	{ "HISI0031", 0 },
 	{ },
 };
 MODULE_DEVICE_TABLE(acpi, dw8250_acpi_match);
-- 
1.7.12.4


^ permalink raw reply	[flat|nested] 13+ messages in thread

* [PATCH v2 2/2] serial: 8250_dw: add ACPI support for uart on Hisilicon Hip05 soc
@ 2016-06-30  1:27   ` Kefeng Wang
  0 siblings, 0 replies; 13+ messages in thread
From: Kefeng Wang @ 2016-06-30  1:27 UTC (permalink / raw)
  To: Greg Kroah-Hartman
  Cc: Jiri Slaby, linux-serial, linux-kernel, Andy Shevchenko,
	z.liuxinliang, guohanjun, linux-acpi, xuwei5, graeme.gregory,
	Kefeng Wang

Add ACPI identifier for UART on Hisilicon Hip05 soc, be careful
that it is not 16550 compatibal.

Meanwhile, set dw8250_serial_out32 to keep consistent between serial_out
and serial_in in ACPI.

Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
---
 drivers/tty/serial/8250/8250_dw.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index 65f3da7..096431b 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -272,6 +272,12 @@ static bool dw8250_idma_filter(struct dma_chan *chan, void *param)
 	return param == chan->device->dev->parent;
 }
 
+/* non 16550 compatible id list*/
+static const struct acpi_device_id non_16550_id_list[] = {
+	{ "HISI0031", 0 },
+	{ },
+};
+
 static void dw8250_quirks(struct uart_port *p, struct dw8250_data *data)
 {
 	if (p->dev->of_node) {
@@ -301,8 +307,10 @@ static void dw8250_quirks(struct uart_port *p, struct dw8250_data *data)
 		p->iotype = UPIO_MEM32;
 		p->regshift = 2;
 		p->serial_in = dw8250_serial_in32;
-		/* So far none of there implement the Busy Functionality */
-		data->uart_16550_compatible = true;
+		p->serial_out = dw8250_serial_out32;
+
+		if (!acpi_match_device(non_16550_id_list, p->dev))
+			data->uart_16550_compatible = true;
 	}
 
 	/* Platforms with iDMA */
@@ -618,6 +626,7 @@ static const struct acpi_device_id dw8250_acpi_match[] = {
 	{ "APMC0D08", 0},
 	{ "AMD0020", 0 },
 	{ "AMDI0020", 0 },
+	{ "HISI0031", 0 },
 	{ },
 };
 MODULE_DEVICE_TABLE(acpi, dw8250_acpi_match);
-- 
1.7.12.4

^ permalink raw reply	[flat|nested] 13+ messages in thread

* Re: [PATCH v2 2/2] serial: 8250_dw: add ACPI support for uart on Hisilicon Hip05 soc
  2016-06-30  1:27   ` Kefeng Wang
  (?)
@ 2016-06-30  9:38   ` Andy Shevchenko
  2016-06-30  9:54       ` Andy Shevchenko
  -1 siblings, 1 reply; 13+ messages in thread
From: Andy Shevchenko @ 2016-06-30  9:38 UTC (permalink / raw)
  To: Kefeng Wang, Greg Kroah-Hartman
  Cc: Jiri Slaby, linux-serial, linux-kernel, z.liuxinliang, guohanjun,
	linux-acpi, xuwei5, graeme.gregory

On Thu, 2016-06-30 at 09:27 +0800, Kefeng Wang wrote:
> Add ACPI identifier for UART on Hisilicon Hip05 soc, be careful
> that it is not 16550 compatibal.
> 
> Meanwhile, set dw8250_serial_out32 to keep consistent between
> serial_out
> and serial_in in ACPI.
> 
> Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
> ---
>  drivers/tty/serial/8250/8250_dw.c | 13 +++++++++++--
>  1 file changed, 11 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/tty/serial/8250/8250_dw.c
> b/drivers/tty/serial/8250/8250_dw.c
> index 65f3da7..096431b 100644
> --- a/drivers/tty/serial/8250/8250_dw.c
> +++ b/drivers/tty/serial/8250/8250_dw.c
> @@ -272,6 +272,12 @@ static bool dw8250_idma_filter(struct dma_chan
> *chan, void *param)
>  	return param == chan->device->dev->parent;
>  }
>  
> +/* non 16550 compatible id list*/
> +static const struct acpi_device_id non_16550_id_list[] = {
> +	{ "HISI0031", 0 },
> +	{ },
> +};
> +

On first glance it looks redundant, see below.

>  static void dw8250_quirks(struct uart_port *p, struct dw8250_data
> *data)
>  {
>  	if (p->dev->of_node) {
> @@ -301,8 +307,10 @@ static void dw8250_quirks(struct uart_port *p,
> struct dw8250_data *data)
>  		p->iotype = UPIO_MEM32;
>  		p->regshift = 2;
>  		p->serial_in = dw8250_serial_in32;
> -		/* So far none of there implement the Busy
> Functionality */
> -		data->uart_16550_compatible = true;
> +		p->serial_out = dw8250_serial_out32;
> +
> +		if (!acpi_match_device(non_16550_id_list, p->dev))
> +			data->uart_16550_compatible = true;
>  	}
>  
>  	/* Platforms with iDMA */
> @@ -618,6 +626,7 @@ static const struct acpi_device_id
> dw8250_acpi_match[] = {
>  	{ "APMC0D08", 0},
>  	{ "AMD0020", 0 },
>  	{ "AMDI0020", 0 },
> +	{ "HISI0031", 0 },

So, we may put something instead of 0 here and consider it as a set of
special quirks / setup instructions / etc.

struct dw8250_dev_info {
  unsigned int  uart_16550_compatible:1;
};

static const struct dw8250_dev_info hisi_dev_info = {
  .uart_16550_compatible = 1,
}

...
 { "HISI0031", (kernel_ulong_t)&hisi_dev_info },
...

And so on.

>  	{ },
>  };
>  MODULE_DEVICE_TABLE(acpi, dw8250_acpi_match);

-- 

Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Intel Finland Oy

^ permalink raw reply	[flat|nested] 13+ messages in thread

* Re: [PATCH v2 2/2] serial: 8250_dw: add ACPI support for uart on Hisilicon Hip05 soc
  2016-06-30  9:38   ` Andy Shevchenko
@ 2016-06-30  9:54       ` Andy Shevchenko
  0 siblings, 0 replies; 13+ messages in thread
From: Andy Shevchenko @ 2016-06-30  9:54 UTC (permalink / raw)
  To: Kefeng Wang, Greg Kroah-Hartman
  Cc: Jiri Slaby, linux-serial, linux-kernel, z.liuxinliang, guohanjun,
	linux-acpi, xuwei5, graeme.gregory

On Thu, 2016-06-30 at 12:38 +0300, Andy Shevchenko wrote:
> On Thu, 2016-06-30 at 09:27 +0800, Kefeng Wang wrote:
> > Add ACPI identifier for UART on Hisilicon Hip05 soc, be careful
> > that it is not 16550 compatibal.
> > 
> > Meanwhile, set dw8250_serial_out32 to keep consistent between
> > serial_out
> > and serial_in in ACPI.
> > 
> > Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
> > ---
> >  drivers/tty/serial/8250/8250_dw.c | 13 +++++++++++--
> >  1 file changed, 11 insertions(+), 2 deletions(-)
> > 
> > diff --git a/drivers/tty/serial/8250/8250_dw.c
> > b/drivers/tty/serial/8250/8250_dw.c
> > index 65f3da7..096431b 100644
> > --- a/drivers/tty/serial/8250/8250_dw.c
> > +++ b/drivers/tty/serial/8250/8250_dw.c
> > @@ -272,6 +272,12 @@ static bool dw8250_idma_filter(struct dma_chan
> > *chan, void *param)
> >  	return param == chan->device->dev->parent;
> >  }
> >  
> > +/* non 16550 compatible id list*/
> > +static const struct acpi_device_id non_16550_id_list[] = {
> > +	{ "HISI0031", 0 },
> > +	{ },
> > +};
> > +
> 
> On first glance it looks redundant, see below.

Oh, wait, this is still valid, but the better solution is to use device
properties for the rest except yours!

I will prepare patch later this week or at the beginning of next week if
you are in hurry, otherwise I would postpone this a bit (anyway it will
not make v4.8 cycle).

-- 

Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Intel Finland Oy
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 13+ messages in thread

* Re: [PATCH v2 2/2] serial: 8250_dw: add ACPI support for uart on Hisilicon Hip05 soc
@ 2016-06-30  9:54       ` Andy Shevchenko
  0 siblings, 0 replies; 13+ messages in thread
From: Andy Shevchenko @ 2016-06-30  9:54 UTC (permalink / raw)
  To: Kefeng Wang, Greg Kroah-Hartman
  Cc: Jiri Slaby, linux-serial, linux-kernel, z.liuxinliang, guohanjun,
	linux-acpi, xuwei5, graeme.gregory

On Thu, 2016-06-30 at 12:38 +0300, Andy Shevchenko wrote:
> On Thu, 2016-06-30 at 09:27 +0800, Kefeng Wang wrote:
> > Add ACPI identifier for UART on Hisilicon Hip05 soc, be careful
> > that it is not 16550 compatibal.
> > 
> > Meanwhile, set dw8250_serial_out32 to keep consistent between
> > serial_out
> > and serial_in in ACPI.
> > 
> > Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
> > ---
> >  drivers/tty/serial/8250/8250_dw.c | 13 +++++++++++--
> >  1 file changed, 11 insertions(+), 2 deletions(-)
> > 
> > diff --git a/drivers/tty/serial/8250/8250_dw.c
> > b/drivers/tty/serial/8250/8250_dw.c
> > index 65f3da7..096431b 100644
> > --- a/drivers/tty/serial/8250/8250_dw.c
> > +++ b/drivers/tty/serial/8250/8250_dw.c
> > @@ -272,6 +272,12 @@ static bool dw8250_idma_filter(struct dma_chan
> > *chan, void *param)
> >  	return param == chan->device->dev->parent;
> >  }
> >  
> > +/* non 16550 compatible id list*/
> > +static const struct acpi_device_id non_16550_id_list[] = {
> > +	{ "HISI0031", 0 },
> > +	{ },
> > +};
> > +
> 
> On first glance it looks redundant, see below.

Oh, wait, this is still valid, but the better solution is to use device
properties for the rest except yours!

I will prepare patch later this week or at the beginning of next week if
you are in hurry, otherwise I would postpone this a bit (anyway it will
not make v4.8 cycle).

-- 

Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Intel Finland Oy

^ permalink raw reply	[flat|nested] 13+ messages in thread

* Re: [PATCH v2 2/2] serial: 8250_dw: add ACPI support for uart on Hisilicon Hip05 soc
  2016-06-30  9:54       ` Andy Shevchenko
@ 2016-06-30 14:26         ` Kefeng Wang
  -1 siblings, 0 replies; 13+ messages in thread
From: Kefeng Wang @ 2016-06-30 14:26 UTC (permalink / raw)
  To: Andy Shevchenko, Greg Kroah-Hartman
  Cc: Jiri Slaby, linux-serial, linux-kernel, z.liuxinliang, guohanjun,
	linux-acpi, xuwei5, graeme.gregory



On 2016/6/30 17:54, Andy Shevchenko wrote:
> On Thu, 2016-06-30 at 12:38 +0300, Andy Shevchenko wrote:
>> On Thu, 2016-06-30 at 09:27 +0800, Kefeng Wang wrote:
>>> Add ACPI identifier for UART on Hisilicon Hip05 soc, be careful
>>> that it is not 16550 compatibal.
>>>
>>> Meanwhile, set dw8250_serial_out32 to keep consistent between
>>> serial_out
>>> and serial_in in ACPI.
>>>
>>> Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
>>> ---
>>>  drivers/tty/serial/8250/8250_dw.c | 13 +++++++++++--
>>>  1 file changed, 11 insertions(+), 2 deletions(-)
>>>
>>> diff --git a/drivers/tty/serial/8250/8250_dw.c
>>> b/drivers/tty/serial/8250/8250_dw.c
>>> index 65f3da7..096431b 100644
>>> --- a/drivers/tty/serial/8250/8250_dw.c
>>> +++ b/drivers/tty/serial/8250/8250_dw.c
>>> @@ -272,6 +272,12 @@ static bool dw8250_idma_filter(struct dma_chan
>>> *chan, void *param)
>>>  	return param == chan->device->dev->parent;
>>>  }
>>>  
>>> +/* non 16550 compatible id list*/
>>> +static const struct acpi_device_id non_16550_id_list[] = {
>>> +	{ "HISI0031", 0 },
>>> +	{ },
>>> +};
>>> +
>>
>> On first glance it looks redundant, see below.
> 
> Oh, wait, this is still valid, but the better solution is to use device
> properties for the rest except yours!

Do you mean using something like

static struct property_entry dw8250_properties[] = {
        PROPERTY_ENTRY_U32("reg-io-width", 4),
        PROPERTY_ENTRY_U32("reg-shift", 2),
        PROPERTY_ENTRY_BOOL("snps,uart-16550-compatible"),
        { },
};

then use platform_device_add_properties to add it to the device(16500 compatible),

but for hisi, use another property_entry without PROPERTY_ENTRY_BOOL("snps,uart-16550-compatible")?

Not clear about using device properties.

> 
> I will prepare patch later this week or at the beginning of next week if
> you are in hurry, otherwise I would postpone this a bit (anyway it will
> not make v4.8 cycle).
> 

Thanks, hope that it will come out soon.

BRs,
Kefeng

^ permalink raw reply	[flat|nested] 13+ messages in thread

* Re: [PATCH v2 2/2] serial: 8250_dw: add ACPI support for uart on Hisilicon Hip05 soc
@ 2016-06-30 14:26         ` Kefeng Wang
  0 siblings, 0 replies; 13+ messages in thread
From: Kefeng Wang @ 2016-06-30 14:26 UTC (permalink / raw)
  To: Andy Shevchenko, Greg Kroah-Hartman
  Cc: Jiri Slaby, linux-serial, linux-kernel, z.liuxinliang, guohanjun,
	linux-acpi, xuwei5, graeme.gregory



On 2016/6/30 17:54, Andy Shevchenko wrote:
> On Thu, 2016-06-30 at 12:38 +0300, Andy Shevchenko wrote:
>> On Thu, 2016-06-30 at 09:27 +0800, Kefeng Wang wrote:
>>> Add ACPI identifier for UART on Hisilicon Hip05 soc, be careful
>>> that it is not 16550 compatibal.
>>>
>>> Meanwhile, set dw8250_serial_out32 to keep consistent between
>>> serial_out
>>> and serial_in in ACPI.
>>>
>>> Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
>>> ---
>>>  drivers/tty/serial/8250/8250_dw.c | 13 +++++++++++--
>>>  1 file changed, 11 insertions(+), 2 deletions(-)
>>>
>>> diff --git a/drivers/tty/serial/8250/8250_dw.c
>>> b/drivers/tty/serial/8250/8250_dw.c
>>> index 65f3da7..096431b 100644
>>> --- a/drivers/tty/serial/8250/8250_dw.c
>>> +++ b/drivers/tty/serial/8250/8250_dw.c
>>> @@ -272,6 +272,12 @@ static bool dw8250_idma_filter(struct dma_chan
>>> *chan, void *param)
>>>  	return param == chan->device->dev->parent;
>>>  }
>>>  
>>> +/* non 16550 compatible id list*/
>>> +static const struct acpi_device_id non_16550_id_list[] = {
>>> +	{ "HISI0031", 0 },
>>> +	{ },
>>> +};
>>> +
>>
>> On first glance it looks redundant, see below.
> 
> Oh, wait, this is still valid, but the better solution is to use device
> properties for the rest except yours!

Do you mean using something like

static struct property_entry dw8250_properties[] = {
        PROPERTY_ENTRY_U32("reg-io-width", 4),
        PROPERTY_ENTRY_U32("reg-shift", 2),
        PROPERTY_ENTRY_BOOL("snps,uart-16550-compatible"),
        { },
};

then use platform_device_add_properties to add it to the device(16500 compatible),

but for hisi, use another property_entry without PROPERTY_ENTRY_BOOL("snps,uart-16550-compatible")?

Not clear about using device properties.

> 
> I will prepare patch later this week or at the beginning of next week if
> you are in hurry, otherwise I would postpone this a bit (anyway it will
> not make v4.8 cycle).
> 

Thanks, hope that it will come out soon.

BRs,
Kefeng

^ permalink raw reply	[flat|nested] 13+ messages in thread

* Re: [PATCH v2 2/2] serial: 8250_dw: add ACPI support for uart on Hisilicon Hip05 soc
  2016-06-30 14:26         ` Kefeng Wang
@ 2016-06-30 14:39           ` Andy Shevchenko
  -1 siblings, 0 replies; 13+ messages in thread
From: Andy Shevchenko @ 2016-06-30 14:39 UTC (permalink / raw)
  To: Kefeng Wang, Greg Kroah-Hartman
  Cc: Jiri Slaby, linux-serial, linux-kernel, z.liuxinliang, guohanjun,
	linux-acpi, xuwei5, graeme.gregory

On Thu, 2016-06-30 at 22:26 +0800, Kefeng Wang wrote:
> 
> On 2016/6/30 17:54, Andy Shevchenko wrote:
> > On Thu, 2016-06-30 at 12:38 +0300, Andy Shevchenko wrote:
> > > On Thu, 2016-06-30 at 09:27 +0800, Kefeng Wang wrote:
> > > > Add ACPI identifier for UART on Hisilicon Hip05 soc, be careful
> > > > that it is not 16550 compatibal.
> > > > 
> > > > Meanwhile, set dw8250_serial_out32 to keep consistent between
> > > > serial_out
> > > > and serial_in in ACPI.
> > > > 
> > > > Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
> > > > ---
> > > >  drivers/tty/serial/8250/8250_dw.c | 13 +++++++++++--
> > > >  1 file changed, 11 insertions(+), 2 deletions(-)
> > > > 
> > > > diff --git a/drivers/tty/serial/8250/8250_dw.c
> > > > b/drivers/tty/serial/8250/8250_dw.c
> > > > index 65f3da7..096431b 100644
> > > > --- a/drivers/tty/serial/8250/8250_dw.c
> > > > +++ b/drivers/tty/serial/8250/8250_dw.c
> > > > @@ -272,6 +272,12 @@ static bool dw8250_idma_filter(struct
> > > > dma_chan
> > > > *chan, void *param)
> > > >  	return param == chan->device->dev->parent;
> > > >  }
> > > >  
> > > > +/* non 16550 compatible id list*/
> > > > +static const struct acpi_device_id non_16550_id_list[] = {
> > > > +	{ "HISI0031", 0 },
> > > > +	{ },
> > > > +};
> > > > +
> > > 
> > > On first glance it looks redundant, see below.
> > 
> > Oh, wait, this is still valid, but the better solution is to use
> > device
> > properties for the rest except yours!
> 
> Do you mean using something like
> 
> static struct property_entry dw8250_properties[] = {
>         PROPERTY_ENTRY_U32("reg-io-width", 4),
>         PROPERTY_ENTRY_U32("reg-shift", 2),
>         PROPERTY_ENTRY_BOOL("snps,uart-16550-compatible"),
>         { },
> };
> 
> then use platform_device_add_properties to add it to the device(16500
> compatible),

Correct for the existing devices.

> 
> but for hisi, use another property_entry without
> PROPERTY_ENTRY_BOOL("snps,uart-16550-compatible")?

For HISI in case of alternate configuration you have to tweak _DSD in
ACPI.

> 
> Not clear about using device properties.

Built-in device properties only for non-DT, non-ACPI devices. You may
consider it as a successor of platform data.

> 
> > 
> > I will prepare patch later this week or at the beginning of next
> > week if
> > you are in hurry, otherwise I would postpone this a bit (anyway it
> > will
> > not make v4.8 cycle).
> > 
> 
> Thanks, hope that it will come out soon.
> 

-- 

Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Intel Finland Oy
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 13+ messages in thread

* Re: [PATCH v2 2/2] serial: 8250_dw: add ACPI support for uart on Hisilicon Hip05 soc
@ 2016-06-30 14:39           ` Andy Shevchenko
  0 siblings, 0 replies; 13+ messages in thread
From: Andy Shevchenko @ 2016-06-30 14:39 UTC (permalink / raw)
  To: Kefeng Wang, Greg Kroah-Hartman
  Cc: Jiri Slaby, linux-serial, linux-kernel, z.liuxinliang, guohanjun,
	linux-acpi, xuwei5, graeme.gregory

On Thu, 2016-06-30 at 22:26 +0800, Kefeng Wang wrote:
> 
> On 2016/6/30 17:54, Andy Shevchenko wrote:
> > On Thu, 2016-06-30 at 12:38 +0300, Andy Shevchenko wrote:
> > > On Thu, 2016-06-30 at 09:27 +0800, Kefeng Wang wrote:
> > > > Add ACPI identifier for UART on Hisilicon Hip05 soc, be careful
> > > > that it is not 16550 compatibal.
> > > > 
> > > > Meanwhile, set dw8250_serial_out32 to keep consistent between
> > > > serial_out
> > > > and serial_in in ACPI.
> > > > 
> > > > Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
> > > > ---
> > > >  drivers/tty/serial/8250/8250_dw.c | 13 +++++++++++--
> > > >  1 file changed, 11 insertions(+), 2 deletions(-)
> > > > 
> > > > diff --git a/drivers/tty/serial/8250/8250_dw.c
> > > > b/drivers/tty/serial/8250/8250_dw.c
> > > > index 65f3da7..096431b 100644
> > > > --- a/drivers/tty/serial/8250/8250_dw.c
> > > > +++ b/drivers/tty/serial/8250/8250_dw.c
> > > > @@ -272,6 +272,12 @@ static bool dw8250_idma_filter(struct
> > > > dma_chan
> > > > *chan, void *param)
> > > >  	return param == chan->device->dev->parent;
> > > >  }
> > > >  
> > > > +/* non 16550 compatible id list*/
> > > > +static const struct acpi_device_id non_16550_id_list[] = {
> > > > +	{ "HISI0031", 0 },
> > > > +	{ },
> > > > +};
> > > > +
> > > 
> > > On first glance it looks redundant, see below.
> > 
> > Oh, wait, this is still valid, but the better solution is to use
> > device
> > properties for the rest except yours!
> 
> Do you mean using something like
> 
> static struct property_entry dw8250_properties[] = {
>         PROPERTY_ENTRY_U32("reg-io-width", 4),
>         PROPERTY_ENTRY_U32("reg-shift", 2),
>         PROPERTY_ENTRY_BOOL("snps,uart-16550-compatible"),
>         { },
> };
> 
> then use platform_device_add_properties to add it to the device(16500
> compatible),

Correct for the existing devices.

> 
> but for hisi, use another property_entry without
> PROPERTY_ENTRY_BOOL("snps,uart-16550-compatible")?

For HISI in case of alternate configuration you have to tweak _DSD in
ACPI.

> 
> Not clear about using device properties.

Built-in device properties only for non-DT, non-ACPI devices. You may
consider it as a successor of platform data.

> 
> > 
> > I will prepare patch later this week or at the beginning of next
> > week if
> > you are in hurry, otherwise I would postpone this a bit (anyway it
> > will
> > not make v4.8 cycle).
> > 
> 
> Thanks, hope that it will come out soon.
> 

-- 

Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Intel Finland Oy

^ permalink raw reply	[flat|nested] 13+ messages in thread

end of thread, other threads:[~2016-06-30 14:40 UTC | newest]

Thread overview: 13+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-06-30  1:27 [PATCH v2 0/2] serial: 8250_dw: Add ACPI support for uart on Hisilicon Hip05 soc Kefeng Wang
2016-06-30  1:27 ` Kefeng Wang
2016-06-30  1:27 ` [PATCH v2 1/2] serial: 8250_dw: make dw8250_set_termios as default set_termios callback Kefeng Wang
2016-06-30  1:27   ` Kefeng Wang
2016-06-30  1:27 ` [PATCH v2 2/2] serial: 8250_dw: add ACPI support for uart on Hisilicon Hip05 soc Kefeng Wang
2016-06-30  1:27   ` Kefeng Wang
2016-06-30  9:38   ` Andy Shevchenko
2016-06-30  9:54     ` Andy Shevchenko
2016-06-30  9:54       ` Andy Shevchenko
2016-06-30 14:26       ` Kefeng Wang
2016-06-30 14:26         ` Kefeng Wang
2016-06-30 14:39         ` Andy Shevchenko
2016-06-30 14:39           ` Andy Shevchenko

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.