All of lore.kernel.org
 help / color / mirror / Atom feed
From: Mel Gorman <mgorman@techsingularity.net>
To: Andrew Morton <akpm@linux-foundation.org>, Linux-MM <linux-mm@kvack.org>
Cc: Rik van Riel <riel@surriel.com>, Vlastimil Babka <vbabka@suse.cz>,
	Johannes Weiner <hannes@cmpxchg.org>,
	Minchan Kim <minchan@kernel.org>,
	Joonsoo Kim <iamjoonsoo.kim@lge.com>,
	LKML <linux-kernel@vger.kernel.org>,
	Mel Gorman <mgorman@techsingularity.net>
Subject: [PATCH 09/34] mm, vmscan: simplify the logic deciding whether kswapd sleeps
Date: Fri,  8 Jul 2016 10:34:45 +0100	[thread overview]
Message-ID: <1467970510-21195-10-git-send-email-mgorman@techsingularity.net> (raw)
In-Reply-To: <1467970510-21195-1-git-send-email-mgorman@techsingularity.net>

kswapd goes through some complex steps trying to figure out if it should
stay awake based on the classzone_idx and the requested order.  It is
unnecessarily complex and passes in an invalid classzone_idx to
balance_pgdat().  What matters most of all is whether a larger order has
been requsted and whether kswapd successfully reclaimed at the previous
order.  This patch irons out the logic to check just that and the end
result is less headache inducing.

Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
---
 include/linux/mmzone.h |   5 ++-
 mm/memory_hotplug.c    |   5 ++-
 mm/page_alloc.c        |   2 +-
 mm/vmscan.c            | 101 ++++++++++++++++++++++++-------------------------
 4 files changed, 57 insertions(+), 56 deletions(-)

diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h
index edafdaf62e90..4062fa74526f 100644
--- a/include/linux/mmzone.h
+++ b/include/linux/mmzone.h
@@ -668,8 +668,9 @@ typedef struct pglist_data {
 	wait_queue_head_t pfmemalloc_wait;
 	struct task_struct *kswapd;	/* Protected by
 					   mem_hotplug_begin/end() */
-	int kswapd_max_order;
-	enum zone_type classzone_idx;
+	int kswapd_order;
+	enum zone_type kswapd_classzone_idx;
+
 #ifdef CONFIG_COMPACTION
 	int kcompactd_max_order;
 	enum zone_type kcompactd_classzone_idx;
diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
index c5278360ca66..065140ecd081 100644
--- a/mm/memory_hotplug.c
+++ b/mm/memory_hotplug.c
@@ -1209,9 +1209,10 @@ static pg_data_t __ref *hotadd_new_pgdat(int nid, u64 start)
 
 		arch_refresh_nodedata(nid, pgdat);
 	} else {
-		/* Reset the nr_zones and classzone_idx to 0 before reuse */
+		/* Reset the nr_zones, order and classzone_idx before reuse */
 		pgdat->nr_zones = 0;
-		pgdat->classzone_idx = 0;
+		pgdat->kswapd_order = 0;
+		pgdat->kswapd_classzone_idx = 0;
 	}
 
 	/* we can use NODE_DATA(nid) from here */
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index b84b85ae54ff..d25dc24f65f2 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -6084,7 +6084,7 @@ void __paginginit free_area_init_node(int nid, unsigned long *zones_size,
 	unsigned long end_pfn = 0;
 
 	/* pg_data_t should be reset to zero when it's allocated */
-	WARN_ON(pgdat->nr_zones || pgdat->classzone_idx);
+	WARN_ON(pgdat->nr_zones || pgdat->kswapd_classzone_idx);
 
 	reset_deferred_meminit(pgdat);
 	pgdat->node_id = nid;
diff --git a/mm/vmscan.c b/mm/vmscan.c
index a52167eabc96..905c60473126 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -2762,7 +2762,7 @@ static bool pfmemalloc_watermark_ok(pg_data_t *pgdat)
 
 	/* kswapd must be awake if processes are being throttled */
 	if (!wmark_ok && waitqueue_active(&pgdat->kswapd_wait)) {
-		pgdat->classzone_idx = min(pgdat->classzone_idx,
+		pgdat->kswapd_classzone_idx = min(pgdat->kswapd_classzone_idx,
 						(enum zone_type)ZONE_NORMAL);
 		wake_up_interruptible(&pgdat->kswapd_wait);
 	}
@@ -3042,11 +3042,11 @@ static bool prepare_kswapd_sleep(pg_data_t *pgdat, int order, long remaining,
 		if (!populated_zone(zone))
 			continue;
 
-		if (zone_balanced(zone, order, classzone_idx))
-			return true;
+		if (!zone_balanced(zone, order, classzone_idx))
+			return false;
 	}
 
-	return false;
+	return true;
 }
 
 /*
@@ -3238,8 +3238,8 @@ static int balance_pgdat(pg_data_t *pgdat, int order, int classzone_idx)
 	return sc.order;
 }
 
-static void kswapd_try_to_sleep(pg_data_t *pgdat, int order,
-				int classzone_idx, int balanced_classzone_idx)
+static void kswapd_try_to_sleep(pg_data_t *pgdat, int alloc_order, int reclaim_order,
+				unsigned int classzone_idx)
 {
 	long remaining = 0;
 	DEFINE_WAIT(wait);
@@ -3250,8 +3250,7 @@ static void kswapd_try_to_sleep(pg_data_t *pgdat, int order,
 	prepare_to_wait(&pgdat->kswapd_wait, &wait, TASK_INTERRUPTIBLE);
 
 	/* Try to sleep for a short interval */
-	if (prepare_kswapd_sleep(pgdat, order, remaining,
-						balanced_classzone_idx)) {
+	if (prepare_kswapd_sleep(pgdat, reclaim_order, remaining, classzone_idx)) {
 		/*
 		 * Compaction records what page blocks it recently failed to
 		 * isolate pages from and skips them in the future scanning.
@@ -3264,9 +3263,20 @@ static void kswapd_try_to_sleep(pg_data_t *pgdat, int order,
 		 * We have freed the memory, now we should compact it to make
 		 * allocation of the requested order possible.
 		 */
-		wakeup_kcompactd(pgdat, order, classzone_idx);
+		wakeup_kcompactd(pgdat, alloc_order, classzone_idx);
 
 		remaining = schedule_timeout(HZ/10);
+
+		/*
+		 * If woken prematurely then reset kswapd_classzone_idx and
+		 * order. The values will either be from a wakeup request or
+		 * the previous request that slept prematurely.
+		 */
+		if (remaining) {
+			pgdat->kswapd_classzone_idx = max(pgdat->kswapd_classzone_idx, classzone_idx);
+			pgdat->kswapd_order = max(pgdat->kswapd_order, reclaim_order);
+		}
+
 		finish_wait(&pgdat->kswapd_wait, &wait);
 		prepare_to_wait(&pgdat->kswapd_wait, &wait, TASK_INTERRUPTIBLE);
 	}
@@ -3275,8 +3285,7 @@ static void kswapd_try_to_sleep(pg_data_t *pgdat, int order,
 	 * After a short sleep, check if it was a premature sleep. If not, then
 	 * go fully to sleep until explicitly woken up.
 	 */
-	if (prepare_kswapd_sleep(pgdat, order, remaining,
-						balanced_classzone_idx)) {
+	if (prepare_kswapd_sleep(pgdat, reclaim_order, remaining, classzone_idx)) {
 		trace_mm_vmscan_kswapd_sleep(pgdat->node_id);
 
 		/*
@@ -3317,9 +3326,7 @@ static void kswapd_try_to_sleep(pg_data_t *pgdat, int order,
  */
 static int kswapd(void *p)
 {
-	unsigned long order, new_order;
-	int classzone_idx, new_classzone_idx;
-	int balanced_classzone_idx;
+	unsigned int alloc_order, reclaim_order, classzone_idx;
 	pg_data_t *pgdat = (pg_data_t*)p;
 	struct task_struct *tsk = current;
 
@@ -3349,38 +3356,20 @@ static int kswapd(void *p)
 	tsk->flags |= PF_MEMALLOC | PF_SWAPWRITE | PF_KSWAPD;
 	set_freezable();
 
-	order = new_order = 0;
-	classzone_idx = new_classzone_idx = pgdat->nr_zones - 1;
-	balanced_classzone_idx = classzone_idx;
+	pgdat->kswapd_order = alloc_order = reclaim_order = 0;
+	pgdat->kswapd_classzone_idx = classzone_idx = 0;
 	for ( ; ; ) {
 		bool ret;
 
-		/*
-		 * While we were reclaiming, there might have been another
-		 * wakeup, so check the values.
-		 */
-		new_order = pgdat->kswapd_max_order;
-		new_classzone_idx = pgdat->classzone_idx;
-		pgdat->kswapd_max_order =  0;
-		pgdat->classzone_idx = pgdat->nr_zones - 1;
+kswapd_try_sleep:
+		kswapd_try_to_sleep(pgdat, alloc_order, reclaim_order,
+					classzone_idx);
 
-		if (order < new_order || classzone_idx > new_classzone_idx) {
-			/*
-			 * Don't sleep if someone wants a larger 'order'
-			 * allocation or has tigher zone constraints
-			 */
-			order = new_order;
-			classzone_idx = new_classzone_idx;
-		} else {
-			kswapd_try_to_sleep(pgdat, order, classzone_idx,
-						balanced_classzone_idx);
-			order = pgdat->kswapd_max_order;
-			classzone_idx = pgdat->classzone_idx;
-			new_order = order;
-			new_classzone_idx = classzone_idx;
-			pgdat->kswapd_max_order = 0;
-			pgdat->classzone_idx = pgdat->nr_zones - 1;
-		}
+		/* Read the new order and classzone_idx */
+		alloc_order = reclaim_order = pgdat->kswapd_order;
+		classzone_idx = pgdat->kswapd_classzone_idx;
+		pgdat->kswapd_order = 0;
+		pgdat->kswapd_classzone_idx = 0;
 
 		ret = try_to_freeze();
 		if (kthread_should_stop())
@@ -3390,12 +3379,24 @@ static int kswapd(void *p)
 		 * We can speed up thawing tasks if we don't call balance_pgdat
 		 * after returning from the refrigerator
 		 */
-		if (!ret) {
-			trace_mm_vmscan_kswapd_wake(pgdat->node_id, order);
+		if (ret)
+			continue;
+
+		/*
+		 * Reclaim begins at the requested order but if a high-order
+		 * reclaim fails then kswapd falls back to reclaiming for
+		 * order-0. If that happens, kswapd will consider sleeping
+		 * for the order it finished reclaiming at (reclaim_order)
+		 * but kcompactd is woken to compact for the original
+		 * request (alloc_order).
+		 */
+		trace_mm_vmscan_kswapd_wake(pgdat->node_id, alloc_order);
+		reclaim_order = balance_pgdat(pgdat, alloc_order, classzone_idx);
+		if (reclaim_order < alloc_order)
+			goto kswapd_try_sleep;
 
-			/* return value ignored until next patch */
-			balance_pgdat(pgdat, order, classzone_idx);
-		}
+		alloc_order = reclaim_order = pgdat->kswapd_order;
+		classzone_idx = pgdat->kswapd_classzone_idx;
 	}
 
 	tsk->flags &= ~(PF_MEMALLOC | PF_SWAPWRITE | PF_KSWAPD);
@@ -3418,10 +3419,8 @@ void wakeup_kswapd(struct zone *zone, int order, enum zone_type classzone_idx)
 	if (!cpuset_zone_allowed(zone, GFP_KERNEL | __GFP_HARDWALL))
 		return;
 	pgdat = zone->zone_pgdat;
-	if (pgdat->kswapd_max_order < order) {
-		pgdat->kswapd_max_order = order;
-		pgdat->classzone_idx = min(pgdat->classzone_idx, classzone_idx);
-	}
+	pgdat->kswapd_classzone_idx = max(pgdat->kswapd_classzone_idx, classzone_idx);
+	pgdat->kswapd_order = max(pgdat->kswapd_order, order);
 	if (!waitqueue_active(&pgdat->kswapd_wait))
 		return;
 	if (zone_balanced(zone, order, 0))
-- 
2.6.4

WARNING: multiple messages have this Message-ID (diff)
From: Mel Gorman <mgorman@techsingularity.net>
To: Andrew Morton <akpm@linux-foundation.org>, Linux-MM <linux-mm@kvack.org>
Cc: Rik van Riel <riel@surriel.com>, Vlastimil Babka <vbabka@suse.cz>,
	Johannes Weiner <hannes@cmpxchg.org>,
	Minchan Kim <minchan@kernel.org>,
	Joonsoo Kim <iamjoonsoo.kim@lge.com>,
	LKML <linux-kernel@vger.kernel.org>,
	Mel Gorman <mgorman@techsingularity.net>
Subject: [PATCH 09/34] mm, vmscan: simplify the logic deciding whether kswapd sleeps
Date: Fri,  8 Jul 2016 10:34:45 +0100	[thread overview]
Message-ID: <1467970510-21195-10-git-send-email-mgorman@techsingularity.net> (raw)
In-Reply-To: <1467970510-21195-1-git-send-email-mgorman@techsingularity.net>

kswapd goes through some complex steps trying to figure out if it should
stay awake based on the classzone_idx and the requested order.  It is
unnecessarily complex and passes in an invalid classzone_idx to
balance_pgdat().  What matters most of all is whether a larger order has
been requsted and whether kswapd successfully reclaimed at the previous
order.  This patch irons out the logic to check just that and the end
result is less headache inducing.

Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
---
 include/linux/mmzone.h |   5 ++-
 mm/memory_hotplug.c    |   5 ++-
 mm/page_alloc.c        |   2 +-
 mm/vmscan.c            | 101 ++++++++++++++++++++++++-------------------------
 4 files changed, 57 insertions(+), 56 deletions(-)

diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h
index edafdaf62e90..4062fa74526f 100644
--- a/include/linux/mmzone.h
+++ b/include/linux/mmzone.h
@@ -668,8 +668,9 @@ typedef struct pglist_data {
 	wait_queue_head_t pfmemalloc_wait;
 	struct task_struct *kswapd;	/* Protected by
 					   mem_hotplug_begin/end() */
-	int kswapd_max_order;
-	enum zone_type classzone_idx;
+	int kswapd_order;
+	enum zone_type kswapd_classzone_idx;
+
 #ifdef CONFIG_COMPACTION
 	int kcompactd_max_order;
 	enum zone_type kcompactd_classzone_idx;
diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
index c5278360ca66..065140ecd081 100644
--- a/mm/memory_hotplug.c
+++ b/mm/memory_hotplug.c
@@ -1209,9 +1209,10 @@ static pg_data_t __ref *hotadd_new_pgdat(int nid, u64 start)
 
 		arch_refresh_nodedata(nid, pgdat);
 	} else {
-		/* Reset the nr_zones and classzone_idx to 0 before reuse */
+		/* Reset the nr_zones, order and classzone_idx before reuse */
 		pgdat->nr_zones = 0;
-		pgdat->classzone_idx = 0;
+		pgdat->kswapd_order = 0;
+		pgdat->kswapd_classzone_idx = 0;
 	}
 
 	/* we can use NODE_DATA(nid) from here */
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index b84b85ae54ff..d25dc24f65f2 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -6084,7 +6084,7 @@ void __paginginit free_area_init_node(int nid, unsigned long *zones_size,
 	unsigned long end_pfn = 0;
 
 	/* pg_data_t should be reset to zero when it's allocated */
-	WARN_ON(pgdat->nr_zones || pgdat->classzone_idx);
+	WARN_ON(pgdat->nr_zones || pgdat->kswapd_classzone_idx);
 
 	reset_deferred_meminit(pgdat);
 	pgdat->node_id = nid;
diff --git a/mm/vmscan.c b/mm/vmscan.c
index a52167eabc96..905c60473126 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -2762,7 +2762,7 @@ static bool pfmemalloc_watermark_ok(pg_data_t *pgdat)
 
 	/* kswapd must be awake if processes are being throttled */
 	if (!wmark_ok && waitqueue_active(&pgdat->kswapd_wait)) {
-		pgdat->classzone_idx = min(pgdat->classzone_idx,
+		pgdat->kswapd_classzone_idx = min(pgdat->kswapd_classzone_idx,
 						(enum zone_type)ZONE_NORMAL);
 		wake_up_interruptible(&pgdat->kswapd_wait);
 	}
@@ -3042,11 +3042,11 @@ static bool prepare_kswapd_sleep(pg_data_t *pgdat, int order, long remaining,
 		if (!populated_zone(zone))
 			continue;
 
-		if (zone_balanced(zone, order, classzone_idx))
-			return true;
+		if (!zone_balanced(zone, order, classzone_idx))
+			return false;
 	}
 
-	return false;
+	return true;
 }
 
 /*
@@ -3238,8 +3238,8 @@ static int balance_pgdat(pg_data_t *pgdat, int order, int classzone_idx)
 	return sc.order;
 }
 
-static void kswapd_try_to_sleep(pg_data_t *pgdat, int order,
-				int classzone_idx, int balanced_classzone_idx)
+static void kswapd_try_to_sleep(pg_data_t *pgdat, int alloc_order, int reclaim_order,
+				unsigned int classzone_idx)
 {
 	long remaining = 0;
 	DEFINE_WAIT(wait);
@@ -3250,8 +3250,7 @@ static void kswapd_try_to_sleep(pg_data_t *pgdat, int order,
 	prepare_to_wait(&pgdat->kswapd_wait, &wait, TASK_INTERRUPTIBLE);
 
 	/* Try to sleep for a short interval */
-	if (prepare_kswapd_sleep(pgdat, order, remaining,
-						balanced_classzone_idx)) {
+	if (prepare_kswapd_sleep(pgdat, reclaim_order, remaining, classzone_idx)) {
 		/*
 		 * Compaction records what page blocks it recently failed to
 		 * isolate pages from and skips them in the future scanning.
@@ -3264,9 +3263,20 @@ static void kswapd_try_to_sleep(pg_data_t *pgdat, int order,
 		 * We have freed the memory, now we should compact it to make
 		 * allocation of the requested order possible.
 		 */
-		wakeup_kcompactd(pgdat, order, classzone_idx);
+		wakeup_kcompactd(pgdat, alloc_order, classzone_idx);
 
 		remaining = schedule_timeout(HZ/10);
+
+		/*
+		 * If woken prematurely then reset kswapd_classzone_idx and
+		 * order. The values will either be from a wakeup request or
+		 * the previous request that slept prematurely.
+		 */
+		if (remaining) {
+			pgdat->kswapd_classzone_idx = max(pgdat->kswapd_classzone_idx, classzone_idx);
+			pgdat->kswapd_order = max(pgdat->kswapd_order, reclaim_order);
+		}
+
 		finish_wait(&pgdat->kswapd_wait, &wait);
 		prepare_to_wait(&pgdat->kswapd_wait, &wait, TASK_INTERRUPTIBLE);
 	}
@@ -3275,8 +3285,7 @@ static void kswapd_try_to_sleep(pg_data_t *pgdat, int order,
 	 * After a short sleep, check if it was a premature sleep. If not, then
 	 * go fully to sleep until explicitly woken up.
 	 */
-	if (prepare_kswapd_sleep(pgdat, order, remaining,
-						balanced_classzone_idx)) {
+	if (prepare_kswapd_sleep(pgdat, reclaim_order, remaining, classzone_idx)) {
 		trace_mm_vmscan_kswapd_sleep(pgdat->node_id);
 
 		/*
@@ -3317,9 +3326,7 @@ static void kswapd_try_to_sleep(pg_data_t *pgdat, int order,
  */
 static int kswapd(void *p)
 {
-	unsigned long order, new_order;
-	int classzone_idx, new_classzone_idx;
-	int balanced_classzone_idx;
+	unsigned int alloc_order, reclaim_order, classzone_idx;
 	pg_data_t *pgdat = (pg_data_t*)p;
 	struct task_struct *tsk = current;
 
@@ -3349,38 +3356,20 @@ static int kswapd(void *p)
 	tsk->flags |= PF_MEMALLOC | PF_SWAPWRITE | PF_KSWAPD;
 	set_freezable();
 
-	order = new_order = 0;
-	classzone_idx = new_classzone_idx = pgdat->nr_zones - 1;
-	balanced_classzone_idx = classzone_idx;
+	pgdat->kswapd_order = alloc_order = reclaim_order = 0;
+	pgdat->kswapd_classzone_idx = classzone_idx = 0;
 	for ( ; ; ) {
 		bool ret;
 
-		/*
-		 * While we were reclaiming, there might have been another
-		 * wakeup, so check the values.
-		 */
-		new_order = pgdat->kswapd_max_order;
-		new_classzone_idx = pgdat->classzone_idx;
-		pgdat->kswapd_max_order =  0;
-		pgdat->classzone_idx = pgdat->nr_zones - 1;
+kswapd_try_sleep:
+		kswapd_try_to_sleep(pgdat, alloc_order, reclaim_order,
+					classzone_idx);
 
-		if (order < new_order || classzone_idx > new_classzone_idx) {
-			/*
-			 * Don't sleep if someone wants a larger 'order'
-			 * allocation or has tigher zone constraints
-			 */
-			order = new_order;
-			classzone_idx = new_classzone_idx;
-		} else {
-			kswapd_try_to_sleep(pgdat, order, classzone_idx,
-						balanced_classzone_idx);
-			order = pgdat->kswapd_max_order;
-			classzone_idx = pgdat->classzone_idx;
-			new_order = order;
-			new_classzone_idx = classzone_idx;
-			pgdat->kswapd_max_order = 0;
-			pgdat->classzone_idx = pgdat->nr_zones - 1;
-		}
+		/* Read the new order and classzone_idx */
+		alloc_order = reclaim_order = pgdat->kswapd_order;
+		classzone_idx = pgdat->kswapd_classzone_idx;
+		pgdat->kswapd_order = 0;
+		pgdat->kswapd_classzone_idx = 0;
 
 		ret = try_to_freeze();
 		if (kthread_should_stop())
@@ -3390,12 +3379,24 @@ static int kswapd(void *p)
 		 * We can speed up thawing tasks if we don't call balance_pgdat
 		 * after returning from the refrigerator
 		 */
-		if (!ret) {
-			trace_mm_vmscan_kswapd_wake(pgdat->node_id, order);
+		if (ret)
+			continue;
+
+		/*
+		 * Reclaim begins at the requested order but if a high-order
+		 * reclaim fails then kswapd falls back to reclaiming for
+		 * order-0. If that happens, kswapd will consider sleeping
+		 * for the order it finished reclaiming at (reclaim_order)
+		 * but kcompactd is woken to compact for the original
+		 * request (alloc_order).
+		 */
+		trace_mm_vmscan_kswapd_wake(pgdat->node_id, alloc_order);
+		reclaim_order = balance_pgdat(pgdat, alloc_order, classzone_idx);
+		if (reclaim_order < alloc_order)
+			goto kswapd_try_sleep;
 
-			/* return value ignored until next patch */
-			balance_pgdat(pgdat, order, classzone_idx);
-		}
+		alloc_order = reclaim_order = pgdat->kswapd_order;
+		classzone_idx = pgdat->kswapd_classzone_idx;
 	}
 
 	tsk->flags &= ~(PF_MEMALLOC | PF_SWAPWRITE | PF_KSWAPD);
@@ -3418,10 +3419,8 @@ void wakeup_kswapd(struct zone *zone, int order, enum zone_type classzone_idx)
 	if (!cpuset_zone_allowed(zone, GFP_KERNEL | __GFP_HARDWALL))
 		return;
 	pgdat = zone->zone_pgdat;
-	if (pgdat->kswapd_max_order < order) {
-		pgdat->kswapd_max_order = order;
-		pgdat->classzone_idx = min(pgdat->classzone_idx, classzone_idx);
-	}
+	pgdat->kswapd_classzone_idx = max(pgdat->kswapd_classzone_idx, classzone_idx);
+	pgdat->kswapd_order = max(pgdat->kswapd_order, order);
 	if (!waitqueue_active(&pgdat->kswapd_wait))
 		return;
 	if (zone_balanced(zone, order, 0))
-- 
2.6.4

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

  parent reply	other threads:[~2016-07-08  9:37 UTC|newest]

Thread overview: 220+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-07-08  9:34 [PATCH 00/34] Move LRU page reclaim from zones to nodes v9 Mel Gorman
2016-07-08  9:34 ` Mel Gorman
2016-07-08  9:34 ` [PATCH 01/34] mm, vmstat: add infrastructure for per-node vmstats Mel Gorman
2016-07-08  9:34   ` Mel Gorman
2016-08-03 19:13   ` Reza Arbab
2016-08-03 19:13     ` Reza Arbab
2016-07-08  9:34 ` [PATCH 02/34] mm, vmscan: move lru_lock to the node Mel Gorman
2016-07-08  9:34   ` Mel Gorman
2016-07-12 11:06   ` Balbir Singh
2016-07-12 11:06     ` Balbir Singh
2016-07-12 11:18     ` Mel Gorman
2016-07-12 11:18       ` Mel Gorman
2016-07-13  5:50       ` Balbir Singh
2016-07-13  5:50         ` Balbir Singh
2016-07-13  8:39         ` Vlastimil Babka
2016-07-13  8:39           ` Vlastimil Babka
2016-07-08  9:34 ` [PATCH 03/34] mm, vmscan: move LRU lists to node Mel Gorman
2016-07-08  9:34   ` Mel Gorman
2016-08-04 20:59   ` James Hogan
2016-08-04 20:59     ` James Hogan
2016-08-04 20:59     ` James Hogan
2016-08-05  8:41     ` Mel Gorman
2016-08-05  8:41       ` Mel Gorman
2016-08-05 10:52       ` James Hogan
2016-08-05 10:52         ` James Hogan
2016-08-05 11:55         ` Mel Gorman
2016-08-05 11:55           ` Mel Gorman
2016-08-05 11:55           ` Mel Gorman
2016-08-05 12:02           ` James Hogan
2016-08-05 12:02             ` James Hogan
2016-07-08  9:34 ` [PATCH 04/34] mm, mmzone: clarify the usage of zone padding Mel Gorman
2016-07-08  9:34   ` Mel Gorman
2016-07-12 13:49   ` Johannes Weiner
2016-07-12 13:49     ` Johannes Weiner
2016-07-08  9:34 ` [PATCH 05/34] mm, vmscan: begin reclaiming pages on a per-node basis Mel Gorman
2016-07-08  9:34   ` Mel Gorman
2016-07-12 13:54   ` Johannes Weiner
2016-07-12 13:54     ` Johannes Weiner
2016-07-14  9:19   ` Vlastimil Babka
2016-07-14  9:19     ` Vlastimil Babka
2016-07-08  9:34 ` [PATCH 06/34] mm, vmscan: have kswapd only scan based on the highest requested zone Mel Gorman
2016-07-08  9:34   ` Mel Gorman
2016-07-12 14:05   ` Johannes Weiner
2016-07-12 14:05     ` Johannes Weiner
2016-07-13  8:37     ` Mel Gorman
2016-07-13  8:37       ` Mel Gorman
2016-07-08  9:34 ` [PATCH 07/34] mm, vmscan: make kswapd reclaim in terms of nodes Mel Gorman
2016-07-08  9:34   ` Mel Gorman
2016-08-29  9:38   ` Srikar Dronamraju
2016-08-29  9:38     ` Srikar Dronamraju
2016-08-30 12:07     ` Mel Gorman
2016-08-30 12:07       ` Mel Gorman
2016-08-30 14:25       ` Srikar Dronamraju
2016-08-30 14:25         ` Srikar Dronamraju
2016-08-30 15:00         ` Mel Gorman
2016-08-30 15:00           ` Mel Gorman
2016-08-31  6:09           ` Srikar Dronamraju
2016-08-31  6:09             ` Srikar Dronamraju
2016-08-31  8:49             ` Mel Gorman
2016-08-31  8:49               ` Mel Gorman
2016-08-31 11:09               ` Michal Hocko
2016-08-31 11:09                 ` Michal Hocko
2016-08-31 12:46                 ` Mel Gorman
2016-08-31 12:46                   ` Mel Gorman
2016-08-31 17:33               ` Srikar Dronamraju
2016-08-31 17:33                 ` Srikar Dronamraju
2016-07-08  9:34 ` [PATCH 08/34] mm, vmscan: remove balance gap Mel Gorman
2016-07-08  9:34   ` Mel Gorman
2016-07-12 14:06   ` Johannes Weiner
2016-07-12 14:06     ` Johannes Weiner
2016-07-08  9:34 ` Mel Gorman [this message]
2016-07-08  9:34   ` [PATCH 09/34] mm, vmscan: simplify the logic deciding whether kswapd sleeps Mel Gorman
2016-07-08  9:34 ` [PATCH 10/34] mm, vmscan: by default have direct reclaim only shrink once per node Mel Gorman
2016-07-08  9:34   ` Mel Gorman
2016-07-08  9:34 ` [PATCH 11/34] mm, vmscan: remove duplicate logic clearing node congestion and dirty state Mel Gorman
2016-07-08  9:34   ` Mel Gorman
2016-07-12 14:22   ` Johannes Weiner
2016-07-12 14:22     ` Johannes Weiner
2016-07-13  8:40     ` Mel Gorman
2016-07-13  8:40       ` Mel Gorman
2016-07-14  9:45   ` Vlastimil Babka
2016-07-14  9:45     ` Vlastimil Babka
2016-07-08  9:34 ` [PATCH 12/34] mm: vmscan: do not reclaim from kswapd if there is any eligible zone Mel Gorman
2016-07-08  9:34   ` Mel Gorman
2016-07-12 14:29   ` Johannes Weiner
2016-07-12 14:29     ` Johannes Weiner
2016-07-13  8:47     ` Mel Gorman
2016-07-13  8:47       ` Mel Gorman
2016-07-13 12:28       ` Johannes Weiner
2016-07-13 12:28         ` Johannes Weiner
2016-07-08  9:34 ` [PATCH 13/34] mm, vmscan: make shrink_node decisions more node-centric Mel Gorman
2016-07-08  9:34   ` Mel Gorman
2016-07-12 14:32   ` Johannes Weiner
2016-07-12 14:32     ` Johannes Weiner
2016-07-13  8:48     ` Mel Gorman
2016-07-13  8:48       ` Mel Gorman
2016-07-08  9:34 ` [PATCH 14/34] mm, memcg: move memcg limit enforcement from zones to nodes Mel Gorman
2016-07-08  9:34   ` Mel Gorman
2016-07-12 14:38   ` Johannes Weiner
2016-07-12 14:38     ` Johannes Weiner
2016-07-08  9:34 ` [PATCH 15/34] mm, workingset: make working set detection node-aware Mel Gorman
2016-07-08  9:34   ` Mel Gorman
2016-07-08  9:34 ` [PATCH 16/34] mm, page_alloc: consider dirtyable memory in terms of nodes Mel Gorman
2016-07-08  9:34   ` Mel Gorman
2016-07-08  9:34 ` [PATCH 17/34] mm: move page mapped accounting to the node Mel Gorman
2016-07-08  9:34   ` Mel Gorman
2016-07-12 14:42   ` Johannes Weiner
2016-07-12 14:42     ` Johannes Weiner
2016-07-08  9:34 ` [PATCH 18/34] mm: rename NR_ANON_PAGES to NR_ANON_MAPPED Mel Gorman
2016-07-08  9:34   ` Mel Gorman
2016-07-12 14:58   ` Johannes Weiner
2016-07-12 14:58     ` Johannes Weiner
2016-07-13  8:55     ` Mel Gorman
2016-07-13  8:55       ` Mel Gorman
2016-07-13 13:04       ` Johannes Weiner
2016-07-13 13:04         ` Johannes Weiner
2016-07-13 13:37         ` Mel Gorman
2016-07-13 13:37           ` Mel Gorman
2016-07-13 21:13           ` Andrew Morton
2016-07-13 21:13             ` Andrew Morton
2016-07-15 10:46             ` Mel Gorman
2016-07-15 10:46               ` Mel Gorman
2016-07-15 22:35               ` Andrew Morton
2016-07-15 22:35                 ` Andrew Morton
2016-07-18 13:34                 ` Johannes Weiner
2016-07-18 13:34                   ` Johannes Weiner
2016-07-14  1:27           ` Minchan Kim
2016-07-14  1:27             ` Minchan Kim
2016-07-08  9:34 ` [PATCH 19/34] mm: move most file-based accounting to the node Mel Gorman
2016-07-08  9:34   ` Mel Gorman
2016-07-12 15:11   ` Johannes Weiner
2016-07-12 15:11     ` Johannes Weiner
2016-07-08  9:34 ` [PATCH 20/34] mm: move vmscan writes and file write " Mel Gorman
2016-07-08  9:34   ` Mel Gorman
2016-07-12 15:15   ` Johannes Weiner
2016-07-12 15:15     ` Johannes Weiner
2016-07-08  9:34 ` [PATCH 21/34] mm, vmscan: only wakeup kswapd once per node for the requested classzone Mel Gorman
2016-07-08  9:34   ` Mel Gorman
2016-07-12 17:18   ` Johannes Weiner
2016-07-12 17:18     ` Johannes Weiner
2016-07-08  9:34 ` [PATCH 22/34] mm, page_alloc: wake kswapd based on the highest eligible zone Mel Gorman
2016-07-08  9:34   ` Mel Gorman
2016-07-12 17:24   ` Johannes Weiner
2016-07-12 17:24     ` Johannes Weiner
2016-07-14 10:05   ` Vlastimil Babka
2016-07-14 10:05     ` Vlastimil Babka
2016-07-08  9:34 ` [PATCH 23/34] mm: convert zone_reclaim to node_reclaim Mel Gorman
2016-07-08  9:34   ` Mel Gorman
2016-07-12 17:28   ` Johannes Weiner
2016-07-12 17:28     ` Johannes Weiner
2016-07-08  9:35 ` [PATCH 24/34] mm, vmscan: avoid passing in classzone_idx unnecessarily to shrink_node Mel Gorman
2016-07-08  9:35   ` Mel Gorman
2016-07-12 17:31   ` Johannes Weiner
2016-07-12 17:31     ` Johannes Weiner
2016-07-14 10:09   ` Vlastimil Babka
2016-07-14 10:09     ` Vlastimil Babka
2016-07-08  9:35 ` [PATCH 25/34] mm, vmscan: avoid passing in classzone_idx unnecessarily to compaction_ready Mel Gorman
2016-07-08  9:35   ` Mel Gorman
2016-07-12 18:01   ` Johannes Weiner
2016-07-12 18:01     ` Johannes Weiner
2016-07-14 12:12   ` Vlastimil Babka
2016-07-14 12:12     ` Vlastimil Babka
2016-07-08  9:35 ` [PATCH 26/34] mm, vmscan: avoid passing in remaining unnecessarily to prepare_kswapd_sleep Mel Gorman
2016-07-08  9:35   ` Mel Gorman
2016-07-12 18:06   ` Johannes Weiner
2016-07-12 18:06     ` Johannes Weiner
2016-07-14 12:48   ` Vlastimil Babka
2016-07-14 12:48     ` Vlastimil Babka
2016-07-08  9:35 ` [PATCH 27/34] mm, vmscan: Have kswapd reclaim from all zones if reclaiming and buffer_heads_over_limit Mel Gorman
2016-07-08  9:35   ` Mel Gorman
2016-07-12 18:10   ` Johannes Weiner
2016-07-12 18:10     ` Johannes Weiner
2016-07-14 12:54   ` Vlastimil Babka
2016-07-14 12:54     ` Vlastimil Babka
2016-07-08  9:35 ` [PATCH 28/34] mm, vmscan: add classzone information to tracepoints Mel Gorman
2016-07-08  9:35   ` Mel Gorman
2016-07-12 18:13   ` Johannes Weiner
2016-07-12 18:13     ` Johannes Weiner
2016-07-08  9:35 ` [PATCH 29/34] mm, page_alloc: remove fair zone allocation policy Mel Gorman
2016-07-08  9:35   ` Mel Gorman
2016-07-12 18:18   ` Johannes Weiner
2016-07-12 18:18     ` Johannes Weiner
2016-07-08  9:35 ` [PATCH 30/34] mm: page_alloc: cache the last node whose dirty limit is reached Mel Gorman
2016-07-08  9:35   ` Mel Gorman
2016-07-12 18:43   ` Johannes Weiner
2016-07-12 18:43     ` Johannes Weiner
2016-07-08  9:35 ` [PATCH 31/34] mm: vmstat: replace __count_zone_vm_events with a zone id equivalent Mel Gorman
2016-07-08  9:35   ` Mel Gorman
2016-07-12 19:10   ` Johannes Weiner
2016-07-12 19:10     ` Johannes Weiner
2016-07-08  9:35 ` [PATCH 32/34] mm: vmstat: account per-zone stalls and pages skipped during reclaim Mel Gorman
2016-07-08  9:35   ` Mel Gorman
2016-07-12 19:06   ` Johannes Weiner
2016-07-12 19:06     ` Johannes Weiner
2016-07-08  9:35 ` [PATCH 33/34] mm, vmstat: print node-based stats in zoneinfo file Mel Gorman
2016-07-08  9:35   ` Mel Gorman
2016-07-12 19:18   ` Johannes Weiner
2016-07-12 19:18     ` Johannes Weiner
2016-07-14 12:56   ` Vlastimil Babka
2016-07-14 12:56     ` Vlastimil Babka
2016-07-08  9:35 ` [PATCH 34/34] mm, vmstat: remove zone and node double accounting by approximating retries Mel Gorman
2016-07-08  9:35   ` Mel Gorman
2016-07-14 13:40   ` Vlastimil Babka
2016-07-14 13:40     ` Vlastimil Babka
2016-07-15  7:48     ` Mel Gorman
2016-07-15  7:48       ` Mel Gorman
2016-07-15 12:20       ` Vlastimil Babka
2016-07-15 12:20         ` Vlastimil Babka
2016-08-19 13:12 ` [PATCH 00/34] Move LRU page reclaim from zones to nodes v9 Andrea Arcangeli
2016-08-19 13:12   ` Andrea Arcangeli
2016-08-19 13:23   ` Vlastimil Babka
2016-08-19 13:23     ` Vlastimil Babka
2016-08-19 13:55     ` Andrea Arcangeli
2016-08-19 13:55       ` Andrea Arcangeli
2016-08-19 14:53   ` Mel Gorman
2016-08-19 14:53     ` Mel Gorman
2016-08-19 15:32     ` Andrea Arcangeli
2016-08-19 15:32       ` Andrea Arcangeli
2016-08-19 15:55       ` Mel Gorman
2016-08-19 15:55         ` Mel Gorman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1467970510-21195-10-git-send-email-mgorman@techsingularity.net \
    --to=mgorman@techsingularity.net \
    --cc=akpm@linux-foundation.org \
    --cc=hannes@cmpxchg.org \
    --cc=iamjoonsoo.kim@lge.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=minchan@kernel.org \
    --cc=riel@surriel.com \
    --cc=vbabka@suse.cz \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.