All of lore.kernel.org
 help / color / mirror / Atom feed
From: Andrey Pronin <apronin@chromium.org>
To: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Cc: Peter Huewe <peterhuewe@gmx.de>,
	Marcel Selhorst <tpmdd@selhorst.net>,
	Jason Gunthorpe <jgunthorpe@obsidianresearch.com>,
	tpmdd-devel@lists.sourceforge.net, linux-kernel@vger.kernel.org,
	groeck@chromium.org, smbarber@chromium.org,
	dianders@chromium.org, Andrey Pronin <apronin@chromium.org>
Subject: [PATCH] tpm_tis_core: convert max timeouts from msec to jiffies
Date: Thu, 14 Jul 2016 17:29:40 -0700	[thread overview]
Message-ID: <1468542580-5296-1-git-send-email-apronin@chromium.org> (raw)

tpm_tis_core was missing conversion from msec when assigning
max timeouts from constants.

Signed-off-by: Andrey Pronin <apronin@chromium.org>
---
 drivers/char/tpm/tpm_tis_core.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/char/tpm/tpm_tis_core.c b/drivers/char/tpm/tpm_tis_core.c
index 8110b52..fb8c3de 100644
--- a/drivers/char/tpm/tpm_tis_core.c
+++ b/drivers/char/tpm/tpm_tis_core.c
@@ -666,10 +666,10 @@ int tpm_tis_core_init(struct device *dev, struct tpm_tis_data *priv, int irq,
 #endif
 
 	/* Maximum timeouts */
-	chip->timeout_a = TIS_TIMEOUT_A_MAX;
-	chip->timeout_b = TIS_TIMEOUT_B_MAX;
-	chip->timeout_c = TIS_TIMEOUT_C_MAX;
-	chip->timeout_d = TIS_TIMEOUT_D_MAX;
+	chip->timeout_a = msecs_to_jiffies(TIS_TIMEOUT_A_MAX);
+	chip->timeout_b = msecs_to_jiffies(TIS_TIMEOUT_B_MAX);
+	chip->timeout_c = msecs_to_jiffies(TIS_TIMEOUT_C_MAX);
+	chip->timeout_d = msecs_to_jiffies(TIS_TIMEOUT_D_MAX);
 	priv->phy_ops = phy_ops;
 	dev_set_drvdata(&chip->dev, priv);
 
-- 
2.6.6

WARNING: multiple messages have this Message-ID
From: Andrey Pronin <apronin-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
To: Jarkko Sakkinen
	<jarkko.sakkinen-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
Cc: dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	smbarber-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org,
	tpmdd-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org,
	groeck-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org
Subject: [PATCH] tpm_tis_core: convert max timeouts from msec to jiffies
Date: Thu, 14 Jul 2016 17:29:40 -0700	[thread overview]
Message-ID: <1468542580-5296-1-git-send-email-apronin@chromium.org> (raw)

tpm_tis_core was missing conversion from msec when assigning
max timeouts from constants.

Signed-off-by: Andrey Pronin <apronin-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
---
 drivers/char/tpm/tpm_tis_core.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/char/tpm/tpm_tis_core.c b/drivers/char/tpm/tpm_tis_core.c
index 8110b52..fb8c3de 100644
--- a/drivers/char/tpm/tpm_tis_core.c
+++ b/drivers/char/tpm/tpm_tis_core.c
@@ -666,10 +666,10 @@ int tpm_tis_core_init(struct device *dev, struct tpm_tis_data *priv, int irq,
 #endif
 
 	/* Maximum timeouts */
-	chip->timeout_a = TIS_TIMEOUT_A_MAX;
-	chip->timeout_b = TIS_TIMEOUT_B_MAX;
-	chip->timeout_c = TIS_TIMEOUT_C_MAX;
-	chip->timeout_d = TIS_TIMEOUT_D_MAX;
+	chip->timeout_a = msecs_to_jiffies(TIS_TIMEOUT_A_MAX);
+	chip->timeout_b = msecs_to_jiffies(TIS_TIMEOUT_B_MAX);
+	chip->timeout_c = msecs_to_jiffies(TIS_TIMEOUT_C_MAX);
+	chip->timeout_d = msecs_to_jiffies(TIS_TIMEOUT_D_MAX);
 	priv->phy_ops = phy_ops;
 	dev_set_drvdata(&chip->dev, priv);
 
-- 
2.6.6


------------------------------------------------------------------------------
What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic
patterns at an interface-level. Reveals which users, apps, and protocols are 
consuming the most bandwidth. Provides multi-vendor support for NetFlow, 
J-Flow, sFlow and other flows. Make informed decisions using capacity planning
reports.http://sdm.link/zohodev2dev

             reply	other threads:[~2016-07-15  0:29 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-07-15  0:29 Andrey Pronin [this message]
2016-07-15  3:06 ` Jason Gunthorpe
2016-07-18 18:45 ` Jarkko Sakkinen
     [not found] ` <1468542580-5296-1-git-send-email-apronin-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
2016-07-18 18:45   ` Jarkko Sakkinen
2016-07-18 18:48     ` Jarkko Sakkinen
2016-07-18 18:49     ` Jason Gunthorpe
     [not found]     ` <20160718184532.GH31463-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
2016-07-18 18:48       ` Jarkko Sakkinen
2016-07-18 18:49       ` Jason Gunthorpe
2016-07-19 12:53         ` Jarkko Sakkinen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1468542580-5296-1-git-send-email-apronin@chromium.org \
    --to=apronin@chromium.org \
    --cc=dianders@chromium.org \
    --cc=groeck@chromium.org \
    --cc=jarkko.sakkinen@linux.intel.com \
    --cc=jgunthorpe@obsidianresearch.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=peterhuewe@gmx.de \
    --cc=smbarber@chromium.org \
    --cc=tpmdd-devel@lists.sourceforge.net \
    --cc=tpmdd@selhorst.net \
    --subject='Re: [PATCH] tpm_tis_core: convert max timeouts from msec to jiffies' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.