All of lore.kernel.org
 help / color / mirror / Atom feed
From: Philippe Reynes <tremyfr@gmail.com>
To: davem@davemloft.net, andrew@lunn.ch, tklauser@distanz.ch,
	colin.king@canonical.com, f.fainelli@gmail.com,
	jcmvbkbc@gmail.com
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
	Philippe Reynes <tremyfr@gmail.com>
Subject: [PATCH v2 1/2] net: ethernet: ethoc: use phydev from struct net_device
Date: Fri, 15 Jul 2016 09:59:11 +0200	[thread overview]
Message-ID: <1468569552-24824-1-git-send-email-tremyfr@gmail.com> (raw)

The private structure contain a pointer to phydev, but the structure
net_device already contain such pointer. So we can remove the pointer
phy in the private structure, and update the driver to use the
one contained in struct net_device.

Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
---
Changelog:
v2:
- remove the definition of phy in the ethoc private struct (thanks Tobias Klauser)

 drivers/net/ethernet/ethoc.c |   20 +++++++-------------
 1 files changed, 7 insertions(+), 13 deletions(-)

diff --git a/drivers/net/ethernet/ethoc.c b/drivers/net/ethernet/ethoc.c
index 4edb98c..317168a 100644
--- a/drivers/net/ethernet/ethoc.c
+++ b/drivers/net/ethernet/ethoc.c
@@ -192,7 +192,6 @@ MODULE_PARM_DESC(buffer_size, "DMA buffer allocation size");
  * @napi:	NAPI structure
  * @msg_enable:	device state flags
  * @lock:	device lock
- * @phy:	attached PHY
  * @mdio:	MDIO bus for PHY access
  * @phy_id:	address of attached PHY
  */
@@ -219,7 +218,6 @@ struct ethoc {
 
 	spinlock_t lock;
 
-	struct phy_device *phy;
 	struct mii_bus *mdio;
 	struct clk *clk;
 	s8 phy_id;
@@ -694,7 +692,6 @@ static int ethoc_mdio_probe(struct net_device *dev)
 		return err;
 	}
 
-	priv->phy = phy;
 	phy->advertising &= ~(ADVERTISED_1000baseT_Full |
 			      ADVERTISED_1000baseT_Half);
 	phy->supported &= ~(SUPPORTED_1000baseT_Full |
@@ -724,7 +721,7 @@ static int ethoc_open(struct net_device *dev)
 		netif_start_queue(dev);
 	}
 
-	phy_start(priv->phy);
+	phy_start(dev->phydev);
 	napi_enable(&priv->napi);
 
 	if (netif_msg_ifup(priv)) {
@@ -741,8 +738,8 @@ static int ethoc_stop(struct net_device *dev)
 
 	napi_disable(&priv->napi);
 
-	if (priv->phy)
-		phy_stop(priv->phy);
+	if (dev->phydev)
+		phy_stop(dev->phydev);
 
 	ethoc_disable_rx_and_tx(priv);
 	free_irq(dev->irq, dev);
@@ -770,7 +767,7 @@ static int ethoc_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 		if (!phy)
 			return -ENODEV;
 	} else {
-		phy = priv->phy;
+		phy = dev->phydev;
 	}
 
 	return phy_mii_ioctl(phy, ifr, cmd);
@@ -899,8 +896,7 @@ out:
 
 static int ethoc_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 {
-	struct ethoc *priv = netdev_priv(dev);
-	struct phy_device *phydev = priv->phy;
+	struct phy_device *phydev = dev->phydev;
 
 	if (!phydev)
 		return -EOPNOTSUPP;
@@ -910,8 +906,7 @@ static int ethoc_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 
 static int ethoc_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 {
-	struct ethoc *priv = netdev_priv(dev);
-	struct phy_device *phydev = priv->phy;
+	struct phy_device *phydev = dev->phydev;
 
 	if (!phydev)
 		return -EOPNOTSUPP;
@@ -1261,8 +1256,7 @@ static int ethoc_remove(struct platform_device *pdev)
 
 	if (netdev) {
 		netif_napi_del(&priv->napi);
-		phy_disconnect(priv->phy);
-		priv->phy = NULL;
+		phy_disconnect(netdev->phydev);
 
 		if (priv->mdio) {
 			mdiobus_unregister(priv->mdio);
-- 
1.7.4.4

             reply	other threads:[~2016-07-15  7:59 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-07-15  7:59 Philippe Reynes [this message]
2016-07-15  7:59 ` [PATCH v2 2/2] net: ethernet: ethoc: use phy_ethtool_{get|set}_link_ksettings Philippe Reynes
2016-07-15  8:41   ` Tobias Klauser
2016-07-15 23:43   ` David Miller
2016-07-15  8:40 ` [PATCH v2 1/2] net: ethernet: ethoc: use phydev from struct net_device Tobias Klauser
2016-07-15 23:43 ` David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1468569552-24824-1-git-send-email-tremyfr@gmail.com \
    --to=tremyfr@gmail.com \
    --cc=andrew@lunn.ch \
    --cc=colin.king@canonical.com \
    --cc=davem@davemloft.net \
    --cc=f.fainelli@gmail.com \
    --cc=jcmvbkbc@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=tklauser@distanz.ch \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.