All of lore.kernel.org
 help / color / mirror / Atom feed
From: Michael Ellerman <mpe@ellerman.id.au>
To: <linuxppc-dev@ozlabs.org>
Subject: [PATCH v2] powerpc: Merge 32-bit and 64-bit setup_arch()
Date: Wed, 20 Jul 2016 18:50:11 +1000	[thread overview]
Message-ID: <1469004611-17316-1-git-send-email-mpe@ellerman.id.au> (raw)

From: Benjamin Herrenschmidt <benh@kernel.crashing.org>

There is little enough differences now.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[mpe: Add empty versions using #ifdef in setup.h rather than weak functions]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/include/asm/kvm_ppc.h |   4 -
 arch/powerpc/include/asm/rtas.h    |   3 +-
 arch/powerpc/include/asm/setup.h   |  46 +++++++++-
 arch/powerpc/kernel/setup-common.c | 169 +++++++++++++++++++++++++++++++++++
 arch/powerpc/kernel/setup_32.c     |  65 +-------------
 arch/powerpc/kernel/setup_64.c     | 178 ++-----------------------------------
 6 files changed, 228 insertions(+), 237 deletions(-)

v2: Add empty versions using #ifdef in setup.h rather than weak functions.

diff --git a/arch/powerpc/include/asm/kvm_ppc.h b/arch/powerpc/include/asm/kvm_ppc.h
index 2544edabe7f3..bad829aae794 100644
--- a/arch/powerpc/include/asm/kvm_ppc.h
+++ b/arch/powerpc/include/asm/kvm_ppc.h
@@ -395,7 +395,6 @@ void kvmppc_set_pid(struct kvm_vcpu *vcpu, u32 pid);
 struct openpic;
 
 #ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
-extern void kvm_cma_reserve(void) __init;
 static inline void kvmppc_set_xics_phys(int cpu, unsigned long addr)
 {
 	paca[cpu].kvm_hstate.xics_phys = addr;
@@ -425,9 +424,6 @@ extern void kvm_hv_vm_deactivated(void);
 extern bool kvm_hv_mode_active(void);
 
 #else
-static inline void __init kvm_cma_reserve(void)
-{}
-
 static inline void kvmppc_set_xics_phys(int cpu, unsigned long addr)
 {}
 
diff --git a/arch/powerpc/include/asm/rtas.h b/arch/powerpc/include/asm/rtas.h
index fa3e3c4367bd..9c23baa10b81 100644
--- a/arch/powerpc/include/asm/rtas.h
+++ b/arch/powerpc/include/asm/rtas.h
@@ -351,7 +351,6 @@ extern bool rtas_indicator_present(int token, int *maxindex);
 extern int rtas_set_indicator(int indicator, int index, int new_value);
 extern int rtas_set_indicator_fast(int indicator, int index, int new_value);
 extern void rtas_progress(char *s, unsigned short hex);
-extern void rtas_initialize(void);
 extern int rtas_suspend_cpu(struct rtas_suspend_me_data *data);
 extern int rtas_suspend_last_cpu(struct rtas_suspend_me_data *data);
 extern int rtas_online_cpus_mask(cpumask_var_t cpus);
@@ -460,9 +459,11 @@ static inline int page_is_rtas_user_buf(unsigned long pfn)
 /* Not the best place to put pSeries_coalesce_init, will be fixed when we
  * move some of the rtas suspend-me stuff to pseries */
 extern void pSeries_coalesce_init(void);
+void rtas_initialize(void);
 #else
 static inline int page_is_rtas_user_buf(unsigned long pfn) { return 0;}
 static inline void pSeries_coalesce_init(void) { }
+static inline void rtas_initialize(void) { };
 #endif
 
 extern int call_rtas(const char *, int, int, unsigned long *, ...);
diff --git a/arch/powerpc/include/asm/setup.h b/arch/powerpc/include/asm/setup.h
index 654d64c9f3ac..3d171fd315c0 100644
--- a/arch/powerpc/include/asm/setup.h
+++ b/arch/powerpc/include/asm/setup.h
@@ -19,6 +19,9 @@ extern unsigned long reloc_offset(void);
 extern unsigned long add_reloc_offset(unsigned long);
 extern void reloc_got2(unsigned long);
 
+extern void initialize_cache_info(void);
+extern void irqstack_early_init(void);
+
 #define PTRRELOC(x)	((typeof(x)) add_reloc_offset((unsigned long)(x)))
 
 void check_for_initrd(void);
@@ -38,7 +41,48 @@ static inline void pseries_big_endian_exceptions(void) {}
 static inline void pseries_little_endian_exceptions(void) {}
 #endif /* CONFIG_PPC_PSERIES */
 
+#ifdef CONFIG_PPC32
+void setup_power_save(void);
+#else
+static inline void setup_power_save(void) { };
+#endif
+
+#if defined(CONFIG_PPC64) && defined(CONFIG_SMP)
+void check_smt_enabled(void);
+#else
+static inline void check_smt_enabled(void) { };
+#endif
+
+#if defined(CONFIG_PPC_BOOK3E) && defined(CONFIG_SMP)
+void setup_tlb_core_data(void);
+#else
+static inline void setup_tlb_core_data(void) { };
+#endif
+
+#if defined(CONFIG_PPC_BOOK3E) || defined(CONFIG_BOOKE) || defined(CONFIG_40x)
+void exc_lvl_early_init(void);
+#else
+static inline void exc_lvl_early_init(void) { };
+#endif
+
+#ifdef CONFIG_PPC64
+void emergency_stack_init(void);
+void smp_release_cpus(void);
+#else
+static inline void emergency_stack_init(void) { };
+static inline void smp_release_cpus(void) { };
+#endif
+
+/*
+ * Having this in kvm_ppc.h makes include dependencies too
+ * tricky to solve for setup-common.c so have it here.
+ */
+#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
+void __init kvm_cma_reserve(void);
+#else
+static inline void kvm_cma_reserve(void) { };
+#endif
+
 #endif /* !__ASSEMBLY__ */
 
 #endif	/* _ASM_POWERPC_SETUP_H */
-
diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
index ca9255e3b763..c6eda53d18c5 100644
--- a/arch/powerpc/kernel/setup-common.c
+++ b/arch/powerpc/kernel/setup-common.c
@@ -35,6 +35,7 @@
 #include <linux/percpu.h>
 #include <linux/memblock.h>
 #include <linux/of_platform.h>
+#include <linux/hugetlb.h>
 #include <asm/io.h>
 #include <asm/paca.h>
 #include <asm/prom.h>
@@ -61,6 +62,10 @@
 #include <asm/cputhreads.h>
 #include <mm/mmu_decl.h>
 #include <asm/fadump.h>
+#include <asm/udbg.h>
+#include <asm/hugetlb.h>
+#include <asm/livepatch.h>
+#include <asm/mmu_context.h>
 
 #ifdef DEBUG
 #include <asm/udbg.h>
@@ -758,3 +763,167 @@ void arch_setup_pdev_archdata(struct platform_device *pdev)
 	pdev->dev.dma_mask = &pdev->archdata.dma_mask;
  	set_dma_ops(&pdev->dev, &dma_direct_ops);
 }
+
+static __init void print_system_info(void)
+{
+	pr_info("-----------------------------------------------------\n");
+#ifdef CONFIG_PPC_STD_MMU_64
+	pr_info("ppc64_pft_size    = 0x%llx\n", ppc64_pft_size);
+#endif
+#ifdef CONFIG_PPC_STD_MMU_32
+	pr_info("Hash_size         = 0x%lx\n", Hash_size);
+#endif
+	pr_info("phys_mem_size     = 0x%llx\n",
+		(unsigned long long)memblock_phys_mem_size());
+
+	pr_info("dcache_bsize      = 0x%x\n", dcache_bsize);
+	pr_info("icache_bsize      = 0x%x\n", icache_bsize);
+	if (ucache_bsize != 0)
+		pr_info("ucache_bsize      = 0x%x\n", ucache_bsize);
+
+	pr_info("cpu_features      = 0x%016lx\n", cur_cpu_spec->cpu_features);
+	pr_info("  possible        = 0x%016lx\n",
+		(unsigned long)CPU_FTRS_POSSIBLE);
+	pr_info("  always          = 0x%016lx\n",
+		(unsigned long)CPU_FTRS_ALWAYS);
+	pr_info("cpu_user_features = 0x%08x 0x%08x\n",
+		cur_cpu_spec->cpu_user_features,
+		cur_cpu_spec->cpu_user_features2);
+	pr_info("mmu_features      = 0x%08x\n", cur_cpu_spec->mmu_features);
+#ifdef CONFIG_PPC64
+	pr_info("firmware_features = 0x%016lx\n", powerpc_firmware_features);
+#endif
+
+#ifdef CONFIG_PPC_STD_MMU_64
+	if (htab_address)
+		pr_info("htab_address      = 0x%p\n", htab_address);
+	if (htab_hash_mask)
+		pr_info("htab_hash_mask    = 0x%lx\n", htab_hash_mask);
+#endif
+#ifdef CONFIG_PPC_STD_MMU_32
+	if (Hash)
+		pr_info("Hash              = 0x%p\n", Hash);
+	if (Hash_mask)
+		pr_info("Hash_mask         = 0x%lx\n", Hash_mask);
+#endif
+
+	if (PHYSICAL_START > 0)
+		pr_info("physical_start    = 0x%llx\n",
+		       (unsigned long long)PHYSICAL_START);
+	pr_info("-----------------------------------------------------\n");
+}
+
+/*
+ * Called into from start_kernel this initializes memblock, which is used
+ * to manage page allocation until mem_init is called.
+ */
+void __init setup_arch(char **cmdline_p)
+{
+	*cmdline_p = boot_command_line;
+
+	/* Set a half-reasonable default so udelay does something sensible */
+	loops_per_jiffy = 500000000 / HZ;
+
+	/* Unflatten the device-tree passed by prom_init or kexec */
+	unflatten_device_tree();
+
+	/* Initialize cache line/block info from device-tree (on ppc64) or
+	 * just cputable (on ppc32).
+	 */
+	initialize_cache_info();
+
+	/* Initialize RTAS if available */
+	rtas_initialize();
+
+	/* Check if we have an initrd provided via the device-tree */
+	check_for_initrd();
+
+	/* Probe the machine type, establish ppc_md */
+	probe_machine();
+
+	/* Setup panic notifier if requested by the platform */
+	setup_panic();
+
+	/*
+	 * Configure ppc_md.power_save (ppc32 only, 64-bit machines do
+	 * it from their respective probe() function
+	 */
+	setup_power_save();
+
+	/* Discover standard serial ports */
+	find_legacy_serial_ports();
+
+	/* Register early console with the printk subsystem */
+	register_early_udbg_console();
+
+	/* Setup the various CPU maps based on the device-tree */
+	smp_setup_cpu_maps();
+
+	/* Initialize xmon */
+	xmon_setup();
+
+	/* Check the SMT related command line arguments (ppc64) */
+	check_smt_enabled();
+
+	/* On BookE, setup per-core TLB data structures */
+	setup_tlb_core_data();
+
+	/* Release secondary cpus out of their spinloops at 0x60 now that
+	 * we can map physical -> logical CPU ids
+	 *
+	 * Freescale Book3e parts spin in a loop provided by firmware,
+	 * so smp_release_cpus() does nothing for them
+	 */
+	smp_release_cpus();
+
+	/* Print various info about the machine that gave been gathered
+	 * so far
+	 */
+	print_system_info();
+
+	/* Reserve large chunks of memory for use by CMA for KVM */
+	kvm_cma_reserve();
+
+	/*
+	 * Reserve any gigantic pages requested on the command line.
+	 * memblock needs to have been initialized by the time this is
+	 * called since this will reserve memory.
+	 */
+	reserve_hugetlb_gpages();
+
+	klp_init_thread_info(&init_thread_info);
+
+	init_mm.start_code = (unsigned long)_stext;
+	init_mm.end_code = (unsigned long) _etext;
+	init_mm.end_data = (unsigned long) _edata;
+	init_mm.brk = klimit;
+#ifdef CONFIG_PPC_64K_PAGES
+	init_mm.context.pte_frag = NULL;
+#endif
+#ifdef CONFIG_SPAPR_TCE_IOMMU
+	mm_iommu_init(&init_mm.context);
+#endif
+	irqstack_early_init();
+	exc_lvl_early_init();
+	emergency_stack_init();
+
+	initmem_init();
+
+#ifdef CONFIG_DUMMY_CONSOLE
+	conswitchp = &dummy_con;
+#endif
+	if (ppc_md.setup_arch)
+		ppc_md.setup_arch();
+
+	paging_init();
+
+	/* Initialize the MMU context management stuff */
+	mmu_context_init();
+
+#ifdef CONFIG_PPC64
+	/* Interrupt code needs to be 64K-aligned */
+	if ((unsigned long)_stext & 0xffff)
+		panic("Kernelbase not 64K-aligned (0x%lx)!\n",
+		      (unsigned long)_stext);
+#endif
+}
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index 6247a3a4fd4b..00f57754407e 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -36,7 +36,6 @@
 #include <asm/time.h>
 #include <asm/serial.h>
 #include <asm/udbg.h>
-#include <asm/mmu_context.h>
 #include <asm/code-patching.h>
 
 #define DBG(fmt...)
@@ -191,7 +190,7 @@ int __init ppc_init(void)
 
 arch_initcall(ppc_init);
 
-static void __init irqstack_early_init(void)
+void __init irqstack_early_init(void)
 {
 	unsigned int i;
 
@@ -206,7 +205,7 @@ static void __init irqstack_early_init(void)
 }
 
 #if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
-static void __init exc_lvl_early_init(void)
+void __init exc_lvl_early_init(void)
 {
 	unsigned int i, hw_cpu;
 
@@ -229,11 +228,9 @@ static void __init exc_lvl_early_init(void)
 #endif
 	}
 }
-#else
-#define exc_lvl_early_init()
 #endif
 
-static void setup_power_save(void)
+void __init setup_power_save(void)
 {
 #ifdef CONFIG_6xx
 	if (cpu_has_feature(CPU_FTR_CAN_DOZE) ||
@@ -248,7 +245,7 @@ static void setup_power_save(void)
 #endif
 }
 
-static __init void initialize_cache_info(void)
+__init void initialize_cache_info(void)
 {
 	/*
 	 * Set cache line size based on type of cpu as a default.
@@ -261,57 +258,3 @@ static __init void initialize_cache_info(void)
 	if (cpu_has_feature(CPU_FTR_UNIFIED_ID_CACHE))
 		ucache_bsize = icache_bsize = dcache_bsize;
 }
-
-
-/* Warning, IO base is not yet inited */
-void __init setup_arch(char **cmdline_p)
-{
-	*cmdline_p = boot_command_line;
-
-	/* so udelay does something sensible, assume <= 1000 bogomips */
-	loops_per_jiffy = 500000000 / HZ;
-
-	unflatten_device_tree();
-	initialize_cache_info();
-	check_for_initrd();
-
-	probe_machine();
-
-	setup_panic();
-
-	setup_power_save();
-
-	find_legacy_serial_ports();
-
-	/* Register early console */
-	register_early_udbg_console();
-
-	smp_setup_cpu_maps();
-
-	xmon_setup();
-
-	init_mm.start_code = (unsigned long)_stext;
-	init_mm.end_code = (unsigned long) _etext;
-	init_mm.end_data = (unsigned long) _edata;
-	init_mm.brk = klimit;
-
-	exc_lvl_early_init();
-
-	irqstack_early_init();
-
-	initmem_init();
-	if ( ppc_md.progress ) ppc_md.progress("setup_arch: initmem", 0x3eab);
-
-#ifdef CONFIG_DUMMY_CONSOLE
-	conswitchp = &dummy_con;
-#endif
-
-	if (ppc_md.setup_arch)
-		ppc_md.setup_arch();
-	if ( ppc_md.progress ) ppc_md.progress("arch: exit", 0x3eab);
-
-	paging_init();
-
-	/* Initialize the MMU context management stuff */
-	mmu_context_init();
-}
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index a4d603c62bdf..c16d5f32ec1f 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -35,7 +35,6 @@
 #include <linux/pci.h>
 #include <linux/lockdep.h>
 #include <linux/memblock.h>
-#include <linux/hugetlb.h>
 #include <linux/memory.h>
 #include <linux/nmi.h>
 
@@ -64,12 +63,10 @@
 #include <asm/xmon.h>
 #include <asm/udbg.h>
 #include <asm/kexec.h>
-#include <asm/mmu_context.h>
 #include <asm/code-patching.h>
-#include <asm/kvm_ppc.h>
-#include <asm/hugetlb.h>
-#include <asm/livepatch.h>
 #include <asm/opal.h>
+#include <asm/cputhreads.h>
+#include <asm/livepatch.h>
 
 #ifdef DEBUG
 #define DBG(fmt...) udbg_printf(fmt)
@@ -100,7 +97,7 @@ int icache_bsize;
 int ucache_bsize;
 
 #if defined(CONFIG_PPC_BOOK3E) && defined(CONFIG_SMP)
-static void setup_tlb_core_data(void)
+void __init setup_tlb_core_data(void)
 {
 	int cpu;
 
@@ -133,10 +130,6 @@ static void setup_tlb_core_data(void)
 		}
 	}
 }
-#else
-static void setup_tlb_core_data(void)
-{
-}
 #endif
 
 #ifdef CONFIG_SMP
@@ -144,7 +137,7 @@ static void setup_tlb_core_data(void)
 static char *smt_enabled_cmdline;
 
 /* Look for ibm,smt-enabled OF option */
-static void check_smt_enabled(void)
+void __init check_smt_enabled(void)
 {
 	struct device_node *dn;
 	const char *smt_option;
@@ -193,8 +186,6 @@ static int __init early_smt_enabled(char *p)
 }
 early_param("smt-enabled", early_smt_enabled);
 
-#else
-#define check_smt_enabled()
 #endif /* CONFIG_SMP */
 
 /** Fix up paca fields required for the boot cpu */
@@ -407,7 +398,7 @@ void smp_release_cpus(void)
  * cache informations about the CPU that will be used by cache flush
  * routines and/or provided to userland
  */
-static void __init initialize_cache_info(void)
+void __init initialize_cache_info(void)
 {
 	struct device_node *np;
 	unsigned long num_cpus = 0;
@@ -479,38 +470,6 @@ static void __init initialize_cache_info(void)
 	DBG(" <- initialize_cache_info()\n");
 }
 
-static __init void print_system_info(void)
-{
-	pr_info("-----------------------------------------------------\n");
-	pr_info("ppc64_pft_size    = 0x%llx\n", ppc64_pft_size);
-	pr_info("phys_mem_size     = 0x%llx\n", memblock_phys_mem_size());
-
-	if (ppc64_caches.dline_size != 0x80)
-		pr_info("dcache_line_size  = 0x%x\n", ppc64_caches.dline_size);
-	if (ppc64_caches.iline_size != 0x80)
-		pr_info("icache_line_size  = 0x%x\n", ppc64_caches.iline_size);
-
-	pr_info("cpu_features      = 0x%016lx\n", cur_cpu_spec->cpu_features);
-	pr_info("  possible        = 0x%016lx\n", CPU_FTRS_POSSIBLE);
-	pr_info("  always          = 0x%016lx\n", CPU_FTRS_ALWAYS);
-	pr_info("cpu_user_features = 0x%08x 0x%08x\n", cur_cpu_spec->cpu_user_features,
-		cur_cpu_spec->cpu_user_features2);
-	pr_info("mmu_features      = 0x%08x\n", cur_cpu_spec->mmu_features);
-	pr_info("firmware_features = 0x%016lx\n", powerpc_firmware_features);
-
-#ifdef CONFIG_PPC_STD_MMU_64
-	if (htab_address)
-		pr_info("htab_address      = 0x%p\n", htab_address);
-
-	pr_info("htab_hash_mask    = 0x%lx\n", htab_hash_mask);
-#endif
-
-	if (PHYSICAL_START > 0)
-		pr_info("physical_start    = 0x%llx\n",
-		       (unsigned long long)PHYSICAL_START);
-	pr_info("-----------------------------------------------------\n");
-}
-
 /* This returns the limit below which memory accesses to the linear
  * mapping are guarnateed not to cause a TLB or SLB miss. This is
  * used to allocate interrupt or emergency stacks for which our
@@ -532,7 +491,7 @@ static __init u64 safe_stack_limit(void)
 #endif
 }
 
-static void __init irqstack_early_init(void)
+void __init irqstack_early_init(void)
 {
 	u64 limit = safe_stack_limit();
 	unsigned int i;
@@ -552,7 +511,7 @@ static void __init irqstack_early_init(void)
 }
 
 #ifdef CONFIG_PPC_BOOK3E
-static void __init exc_lvl_early_init(void)
+void __init exc_lvl_early_init(void)
 {
 	unsigned int i;
 	unsigned long sp;
@@ -574,8 +533,6 @@ static void __init exc_lvl_early_init(void)
 	if (cpu_has_feature(CPU_FTR_DEBUG_LVL_EXC))
 		patch_exception(0x040, exc_debug_debug_book3e);
 }
-#else
-#define exc_lvl_early_init()
 #endif
 
 /*
@@ -583,7 +540,7 @@ static void __init exc_lvl_early_init(void)
  * early in SMP boots before relocation is enabled. Exclusive emergency
  * stack for machine checks.
  */
-static void __init emergency_stack_init(void)
+void __init emergency_stack_init(void)
 {
 	u64 limit;
 	unsigned int i;
@@ -614,125 +571,6 @@ static void __init emergency_stack_init(void)
 	}
 }
 
-/*
- * Called into from start_kernel this initializes memblock, which is used
- * to manage page allocation until mem_init is called.
- */
-void __init setup_arch(char **cmdline_p)
-{
-	*cmdline_p = boot_command_line;
-
-	/*
-	 * Unflatten the device-tree passed by prom_init or kexec
-	 */
-	unflatten_device_tree();
-
-	/*
-	 * Fill the ppc64_caches & systemcfg structures with informations
- 	 * retrieved from the device-tree.
-	 */
-	initialize_cache_info();
-
-#ifdef CONFIG_PPC_RTAS
-	/*
-	 * Initialize RTAS if available
-	 */
-	rtas_initialize();
-#endif /* CONFIG_PPC_RTAS */
-
-	/*
-	 * Check if we have an initrd provided via the device-tree
-	 */
-	check_for_initrd();
-
-	/* Probe the machine type */
-	probe_machine();
-
-	setup_panic();
-
- 	/*
-	 * We can discover serial ports now since the above did setup the
-	 * hash table management for us, thus ioremap works. We do that early
-	 * so that further code can be debugged
-	 */
-	find_legacy_serial_ports();
-
-	/*
-	 * Register early console
-	 */
-	register_early_udbg_console();
-
-	smp_setup_cpu_maps();
-
-	/*
-	 * Initialize xmon
-	 */
-	xmon_setup();
-
-	check_smt_enabled();
-	setup_tlb_core_data();
-
-	/*
-	 * Freescale Book3e parts spin in a loop provided by firmware,
-	 * so smp_release_cpus() does nothing for them
-	 */
-#if defined(CONFIG_SMP)
-	/* Release secondary cpus out of their spinloops at 0x60 now that
-	 * we can map physical -> logical CPU ids
-	 */
-	smp_release_cpus();
-#endif
-
-	/* Print various info about the machine that gave been gathered
-	 * so far
-	 */
-	print_system_info();
-
-	/* Reserve large chunks of memory for use by CMA for KVM */
-	kvm_cma_reserve();
-
-	/*
-	 * Reserve any gigantic pages requested on the command line.
-	 * memblock needs to have been initialized by the time this is
-	 * called since this will reserve memory.
-	 */
-	reserve_hugetlb_gpages();
-
-	klp_init_thread_info(&init_thread_info);
-
-	init_mm.start_code = (unsigned long)_stext;
-	init_mm.end_code = (unsigned long) _etext;
-	init_mm.end_data = (unsigned long) _edata;
-	init_mm.brk = klimit;
-#ifdef CONFIG_PPC_64K_PAGES
-	init_mm.context.pte_frag = NULL;
-#endif
-#ifdef CONFIG_SPAPR_TCE_IOMMU
-	mm_iommu_init(&init_mm.context);
-#endif
-	irqstack_early_init();
-	exc_lvl_early_init();
-	emergency_stack_init();
-
-	initmem_init();
-
-#ifdef CONFIG_DUMMY_CONSOLE
-	conswitchp = &dummy_con;
-#endif
-	if (ppc_md.setup_arch)
-		ppc_md.setup_arch();
-
-	paging_init();
-
-	/* Initialize the MMU context management stuff */
-	mmu_context_init();
-
-	/* Interrupt code needs to be 64K-aligned */
-	if ((unsigned long)_stext & 0xffff)
-		panic("Kernelbase not 64K-aligned (0x%lx)!\n",
-		      (unsigned long)_stext);
-}
-
 #ifdef CONFIG_SMP
 #define PCPU_DYN_SIZE		()
 
-- 
2.7.4

             reply	other threads:[~2016-07-20  8:50 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-07-20  8:50 Michael Ellerman [this message]
2016-07-21  4:20 ` [PATCH v2] powerpc: Merge 32-bit and 64-bit setup_arch() Michael Ellerman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1469004611-17316-1-git-send-email-mpe@ellerman.id.au \
    --to=mpe@ellerman.id.au \
    --cc=linuxppc-dev@ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.