From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from kirsty.vergenet.net ([202.4.237.240]:41245 "EHLO kirsty.vergenet.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750701AbcG0ENh (ORCPT ); Wed, 27 Jul 2016 00:13:37 -0400 From: Simon Horman To: Wolfram Sang , Ulf Hansson Cc: Magnus Damm , linux-mmc@vger.kernel.org, linux-renesas-soc@vger.kernel.org Subject: [PATCH v4 1/4] mmc: tmio: enhance illegal sequence handling Date: Wed, 27 Jul 2016 13:13:20 +0900 Message-Id: <1469592803-13842-2-git-send-email-horms+renesas@verge.net.au> In-Reply-To: <1469592803-13842-1-git-send-email-horms+renesas@verge.net.au> References: <1469592803-13842-1-git-send-email-horms+renesas@verge.net.au> Sender: linux-renesas-soc-owner@vger.kernel.org List-ID: From: Ai Kyuse An illegal sequence command error may occur if there is a stopbit or cmd_index error as well as a CRC error. The correct course of action is to re-enable IRQs An illegal sequence data error may occur if there is a CRC or stopbit error, or underrun. In this case set data->error correctly. This is in preparation for enabling tuning support which relies on differentiating between illegal sequence and other errors. Signed-off-by: Ai Kyuse [simon: broken out of a larger patch] Signed-off-by: Simon Horman Reviewed-by: Wolfram Sang --- v4 * Added Ack from Wolfram Sang v3 * No change v2 * Broken out of a larger patch (but forgot to post) --- drivers/mmc/host/tmio_mmc_pio.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) diff --git a/drivers/mmc/host/tmio_mmc_pio.c b/drivers/mmc/host/tmio_mmc_pio.c index 92467efc4e2c..a9d07b5f3c63 100644 --- a/drivers/mmc/host/tmio_mmc_pio.c +++ b/drivers/mmc/host/tmio_mmc_pio.c @@ -520,7 +520,7 @@ void tmio_mmc_do_data_irq(struct tmio_mmc_host *host) schedule_work(&host->done); } -static void tmio_mmc_data_irq(struct tmio_mmc_host *host) +static void tmio_mmc_data_irq(struct tmio_mmc_host *host, unsigned int stat) { struct mmc_data *data; spin_lock(&host->lock); @@ -529,6 +529,9 @@ static void tmio_mmc_data_irq(struct tmio_mmc_host *host) if (!data) goto out; + if (stat & TMIO_STAT_CRCFAIL || stat & TMIO_STAT_STOPBIT_ERR || + stat & TMIO_STAT_TXUNDERRUN) + data->error = -EILSEQ; if (host->chan_tx && (data->flags & MMC_DATA_WRITE) && !host->force_pio) { u32 status = sd_ctrl_read16_and_16_as_32(host, CTL_STATUS); bool done = false; @@ -577,8 +580,6 @@ static void tmio_mmc_cmd_irq(struct tmio_mmc_host *host, goto out; } - host->cmd = NULL; - /* This controller is sicker than the PXA one. Not only do we need to * drop the top 8 bits of the first response word, we also need to * modify the order of the response for short response command types. @@ -598,14 +599,16 @@ static void tmio_mmc_cmd_irq(struct tmio_mmc_host *host, if (stat & TMIO_STAT_CMDTIMEOUT) cmd->error = -ETIMEDOUT; - else if (stat & TMIO_STAT_CRCFAIL && cmd->flags & MMC_RSP_CRC) + else if ((stat & TMIO_STAT_CRCFAIL && cmd->flags & MMC_RSP_CRC) || + stat & TMIO_STAT_STOPBIT_ERR || + stat & TMIO_STAT_CMD_IDX_ERR) cmd->error = -EILSEQ; /* If there is data to handle we enable data IRQs here, and * we will ultimatley finish the request in the data_end handler. * If theres no data or we encountered an error, finish now. */ - if (host->data && !cmd->error) { + if (host->data && (!cmd->error || cmd->error == -EILSEQ)) { if (host->data->flags & MMC_DATA_READ) { if (host->force_pio || !host->chan_rx) tmio_mmc_enable_mmc_irqs(host, TMIO_MASK_READOP); @@ -666,7 +669,7 @@ static bool __tmio_mmc_sdcard_irq(struct tmio_mmc_host *host, /* Data transfer completion */ if (ireg & TMIO_STAT_DATAEND) { tmio_mmc_ack_mmc_irqs(host, TMIO_STAT_DATAEND); - tmio_mmc_data_irq(host); + tmio_mmc_data_irq(host, status); return true; } -- 2.7.0.rc3.207.g0ac5344